Search NASA⌕ Search

SEARCH · Search NASA

Results for “terminal characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

First-principles study of Al/Al 3 Ni interfaces

Al-Ni alloys have shown promise for high-temperature applications due to the strengthening of Al 3 Ni fibers resistant to coarsening and spheroidization up to 400°C. While the interface between Al and Al 3 Ni phases affects the coarsening rate of Al 3 Ni at elevated temperatures, its characteristics are largely unknown to date. Here, we have constructed various supercells to model this interface and performed a first-principles study based on density functional theory (DFT). We have considered three groups of Al/Al 3 Ni interfaces: experimentally reported orientation relationships from the solidification studies, crystallographically similar Fe-Fe 3 C pearlite interfaces, and the family of low-index (100) termination planes. We have analyzed the correlation between the DFT Al/Al 3 Ni interfacial energies and characteristic features, e.g., excess free volume and the number of broken bonds. We outline the further experimental and computational analysis required to improve the interface modeling of Al/Al 3 Ni.

36 MATERIALS SCIENCE↗

Targeted Writing and Deleting of Magnetic Skyrmions in Two-Terminal Nanowire Devices

Controllable writing and deleting of nanoscale magnetic skyrmions are key requirements for their use as information carriers for next-generation memory and computing technologies. While several schemes have been proposed, they require complex fabrication techniques or precisely tailored electrical inputs, which limits their long-term scalability. In this work, we demonstrate an alternative approach for writing and deleting skyrmions using conventional electrical pulses within a simple, two-terminal wire geometry. X-ray microscopy experiments and micromagnetic simulations establish the observed skyrmion creation and annihilation as arising from Joule heating and Oersted field effects of the current pulses, respectively. The unique characteristics of these writing and deleting schemes, such as spatial and temporal selectivity, together with the simplicity of the two-terminal device architecture, provide a flexible and scalable route to the viable applications of skyrmions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On the intermediate Jacobian of M5-branes

Abstract We study Euclidean M5-branes wrapping vertical divisors in elliptic Calabi-Yau fourfold compactifications of M/F-theory that admit a Sen limit. We construct these Calabi-Yau fourfolds as elliptic fibrations over coordinate flip O3/O7 orientifolds of toric hypersurface Calabi-Yau threefolds. We devise a method to analyze the Hodge structure (and hence the dimension of the intermediate Jacobian) of vertical divisors in these fourfolds, using only the data available from a type IIB compactification on the O3/O7 Calabi-Yau orientifold. Our method utilizes simple combinatorial formulae (that we prove) for the equivariant Hodge numbers of the Calabi-Yau orientifolds and their prime toric divisors, along with a formula for the Euler characteristic of vertical divisors in the corresponding elliptic Calabi-Yau fourfold. Our formula for the Euler characteristic includes a conjectured correction term that accounts for the contributions of pointlike terminal ℤ 2 singularities corresponding to perturbative O3-planes. We check our conjecture in a number of explicit examples and find perfect agreement with the results of direct computations.

Physics↗

Accumulation-Type Ohmic van der Waals Contacts to Nearly Intrinsic WSe 2 Nanosheet-Based Channels: Implications for Field-Effect Transistors

We report the fabrication of ohmic van der Waals (vdW) contacts to nearly intrinsic WSe 2 nanosheet-based channels in field-effect transistors (FETs) using degenerately p-doped MoS2 (p + -MoS2) as a contact metal. We demonstrate that accumulation-type ohmic contacts and the high device performance are achievable without electrostatically gating the drain/source contact regions despite the nearly intrinsic nature of WSe 2 . Back-gated WSe 2 FETs with p + -MoS 2 bottom contacts (which screen the back-gate electric field in the drain/source regions) exhibit linear output characteristics, a high on/off ratio of 10 8 , and a high two-terminal field-effect mobility up to ~200 cm2 V –1 s –1 at room temperature. Our theoretical modeling reveals that the p + -MoS 2 /WSe 2 vdW junction behaves like a metal/semiconductor ohmic contact signified by a vanishingly thin space-charge region of ~1 nm on the p + -MoS 2 side and a substantial accumulation layer of free holes on the WSe 2 side, which is further verified by additional temperature-dependent and dual-gated measurements of WSe 2 FETs. We attribute the formation of accumulation-type ohmic contacts free of a Schottky barrier to the near absence of Fermi-level pinning at the vdW interface and the work function of p + -MoS 2 being larger than the ionization energy of WSe 2 . This study represents an important step toward achieving low-resistance ohmic contacts to two-dimensional (2D) semiconductors by eliminating the Fermi-level pinning effects, which is expected to have significant implications for next-generation 2D semiconductor-based nanoelectronics.

36 MATERIALS SCIENCE↗

Interface standards for computer equipment

The ability to configure data systems using modules provided by independent manufacturers is complicated by the wide range of electrical, mechanical, and functional characteristics exhibited within the equipment provided by different manufacturers of computers, peripherals, and terminal devices. A number of international organizations were and still are involved in the creation of standards that enable devices to be interconnected with minimal difficulty, usually involving only a cable or data bus connection that is defined by the standard. The elements covered by an interface standard are covered and the most prominent interface standards presently in use are identified and described.

Source record↗

Apparatus for measuring semiconductor device resistance

A test structure is described for enabling the accurate measurement of the resistance characteristics of a semiconductor material and includes one or more pairs of electrical terminals disposed on the surface of the material to enable measurements of the resistance encountered by currents passed between the terminals. A pair of terminals includes a first terminal extending in a closed path, such as a circle, around a second terminal, so that all currents flowing between the terminals flow along a region of known width and length. Two or more pairs of concentric terminals can be utilized, wherein the ratio of radii of each pair of terminals is the same as the ratio for all other pairs of terminals, to facilitate the calculation of the contact resistance between each terminal and the semiconductor surface, as well as the calculation of the resistance of the semiconductor material apart from the effect of the terminal to semiconductor contact resistances.

Matzen, W. J.↗

AVE-SESAME IV: 25 mb sounding data

The rawinsonde sounding program for the AVE-SESAME 4 experiment is descirbed and tabulated data at 25 mb for the 23 National Weather Service and 20 special stations participating in the experiment are presented. Soundings were taken at 3 hr intervals beginning at 1200 GMT on May 9, 1979, and ending at 1200 GMT on May 10, 1979 (nine sounding times). The method of processing is discussed, estimates of the rms errors in the data are presented, and an example of contact data is given. Reasons are given for the termination of soundings below 100 mb, and soundings are listed which exhibit abnormal characteristics.

Sienkiewicz, M. E.↗

AVE-SESAME 6: 25-MB sounding data

The rawinsonde sounding program for the AVE-SESAME 6 experiment is described and tabulated data at 25 mb intervals from the surface to 25 mb for the 23 National Weather Service and 15 special stations participating in the experiment are presented. Soundings were taken at 3 h intervals beginning at 1200 GMT on June 7, 1979, and ending at 1200 GMT on June 8, 1979 (nine sounding times). The method of processing is discussed briefly, estimates of the rms errors in the data presented, an example of contact data given, reasons given for the termination of soundings below 100 mb, and soundings are listed which exhibit abnormal characteristics.

Sienkiewicz, M. E.↗

The S2 VLBI Systems: DAS, RT/PT and Correlator

The S2 VLBI system synthesizes wide IF bandwidths by rapidly switching the local oscillator (LO) frequency in a small (1-4) number of baseband converters (BBC's). Data are recorded on video cassettes using an array of 8 VHS transports. Characteristics of the S2 Data Acquisition System (DAS), the S2 Record and Playback Terminals (RT and PT) and the S2 Correlator are summarized. The bandwidth synthesis (BWS) frequency switching sequence used in a series of system validation experiments is presented.

Petrachenko, William T.↗

[Results of Simulation Studies]

Lattice Monte Carlo and off-lattice molecular dynamics simulations of h(sub 1)t(sub 4) and h(sub 4)t(sub l) (head/tail) amphiphile solutions have been performed as a function of surfactant concentration and temperature. The lattice and off-lattice systems exhibit quite different self-assembly behavior at equivalent thermodynamic conditions. We found that in the weakly aggregating regime (no preferred-size micelles), all models yield similar micelle size distributions at the same average aggregation number, albeit at different thermodynamic conditions (temperatures). In the strongly aggregating regime, this mapping between models (through temperature adjustment) fails, and the models exhibit qualitatively different micellization behavior. Incipient micellization in a model self-associating telechelic polymer solution results in a network with a transient elastic response that decays by a two-step relaxation: the first is due to a heterogeneous jump-diffusion process involving entrapment of end-groups within well-defined clusters and this is followed by rapid diffusion to neighboring clusters and a decay (terminal relaxation) due to cluster disintegration. The viscoelastic response of the solution manifests characteristics of a glass transition and entangled polymer network.

Source record↗

Multi-Directional Environmental Sensors

Systems and methods in accordance with embodiments of the invention implement multi-directional environmental sensors. In one embodiment, a multi-directional environmental sensor includes: an inner conductive element that is substantially symmetrical about three orthogonal planes; an outer conductive element that is substantially symmetrical about three orthogonal planes; and a device that measures the electrical characteristics of the multi-directional environmental sensor, the device having a first terminal and a second terminal; where the inner conductive element is substantially enclosed within the outer conductive element; where the inner conductive element is electrically coupled to the first terminal of the device; and where the outer conductive element is electrically coupled to the second terminal of the device.

Manohara, Harish↗

Handling Qualities Influences on Civil Tiltrotor Terminal Operating Procedure Development

The potential for tiltrotor aircraft as civil transports has been well recognized. Realization of that potential requires development of operating procedures tailored to take advantage of the tiltrotor's capabilities, including thrust vectoring independent of body pitch attitude and good low-speed control. While the tiltrotor shares flight characteristics with both fixed wing airplanes and helicopters, it must convert between those flight modes, typically within the context of precise terminal operations. A series of piloted simulation experiments has been conducted on the NASA Ames Research Center Vertical Motion Simulator (VMS) to investigate the influence of tiltrotor cockpit design features on developing certification and operating criteria for civil tiltrotor transports. Handling qualities evaluations have shaped cockpit design guidelines and operating procedure development for a civil tiltrotor. In particular, four topics demonstrate the interplay of handling qualities and operations profile in the development of terminal operating procedures and cockpit or control equipment for a civil tiltrotor: conversion (airplane to helicopter mode), final approach path angle, operating profile speeds and speed changes (particularly under instrument conditions), and one engine inoperative operational considerations.

Decker, William A.↗

Mechanism of tethered agonist-mediated signaling by polycystin-1

Mutations of polycystin-1 (PC1) are the major cause (85% of cases) of autosomal dominant polycystic kidney disease (ADPKD), which is the fourth leading cause of kidney failure. PC1 is thought to function as an atypical G protein-coupled receptor, yet the mechanism by which PC1 regulates G-protein signaling remains poorly understood. A significant portion of ADPKD mutations of PC1 encode a protein with defects in maturation or reduced function that may be amenable to functional rescue. In this work, we have combined complementary biochemical and cellular assay experiments and accelerated molecular simulations, which revealed an allosteric transduction pathway in activation of the PC1 C-terminal fragment. Our findings will facilitate future rational drug design efforts targeting the PC1 signaling function. Polycystin-1 (PC1) is an important unusual G protein-coupled receptor (GPCR) with 11 transmembrane domains, and its mutations account for 85% of cases of autosomal dominant polycystic kidney disease (ADPKD). PC1 shares multiple characteristics with Adhesion GPCRs. These include a GPCR proteolysis site that autocatalytically divides these proteins into extracellular, N-terminal, and membrane-embedded, C-terminal fragments (CTF), and a tethered agonist (TA) within the N-terminal stalk of the CTF that is suggested to activate signaling. However, the mechanism by which a TA can activate PC1 is not known. Here, we have combined functional cellular signaling experiments of PC1 CTF expression constructs encoding wild type, stalkless, and three different ADPKD stalk variants with all-atom Gaussian accelerated molecular dynamics (GaMD) simulations to investigate TA-mediated signaling activation. Correlations of residue motions and free-energy profiles calculated from the GaMD simulations correlated with the differential signaling abilities of wild type and stalk variants of PC1 CTF. They suggested an allosteric mechanism involving residue interactions connecting the stalk, Tetragonal Opening for Polycystins (TOP) domain, and putative pore loop in TA-mediated activation of PC1 CTF. Key interacting residues such as N3074–S3585 and R3848–E4078 predicted from the GaMD simulations were validated by mutagenesis experiments. Together, these complementary analyses have provided insights into a TA-mediated activation mechanism of PC1 CTF signaling, which will be important for future rational drug design targeting PC1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photometric studies of light scattering above the lunar terminator from Apollo solar corona photography

Excess brightness is found in 70-mm photographs of the solar corona above the lunar terminator during Apollo 15 and 17. Maximum brightness of this scattered light is determined from calibration of image density. The observed excess brightness displays circular symmetry above the lunar-horizon subsolar point, characteristic of forward diffraction scattering from micron or submicron size (solid) grains, and decays rapidly in intensity with altitude and distance from the lunar terminator. The observed brightness cannot be accounted for by a co-orbiting cloud of spacecraft contaminants, but requires a variable lunar dust 'atmosphere' over the terminator regions extending to altitudes in excess of 100 km. To maintain such large masses of lunar fines above the terminator requires either local mass-churning rates in excess of 2 by 10 to the -11th power g/sq cm sec or the assumption of some degree of high-altitude electrostatic suspension to increase the dwell time of individual grains at the altitudes observed. Such a model would reduce mass-churning rates while causing selective erosion/deposition and potential for escape of significant mass from the moon

Mccoy, J. E.↗

Kinetic and substrate complex characterization of RamA, a corrinoid protein reductive activase from Methanosarcina barkeri

ABSTRACT In microbial corrinoid-dependent methyltransferase systems, adventitious Co(I)-corrinoid oxidation halts catalysis and necessitates repair by ATP-dependent reductive activases. RamA, an activase with a C-terminal ferredoxin domain with two [4Fe-4S] clusters from methanogenic archaea, has been far less studied than the bacterial activases bearing an N-terminal ferredoxin domain with one [2Fe-2S] cluster. These differences suggest RamA might prove to have other distinctive characteristics. Here, we examine RamA kinetics and the stoichiometry of the corrinoid protein:RamA complex. Like bacterial activases, K+ stimulates RamA. Potassium stimulation had been questioned due to differences in the primary structure of bacterial and methanogen activases. Unlike one bacterial activase, ATP is not inhibitory allowing the first determination of apparent kinetic parameters for any corrinoid activase. Unlike bacterial activases, a single RamA monomer complexes a single corrinoid protein monomer. Alanine replacement of a RamA serine residue corresponding to the serine of one bacterial activase which ligates the corrinoid cobalt during complex formation led to only moderate changes in the kinetics of RamA. These results reveal new differences in the two types of corrinoid activases, and provide direct evidence for the proposal that corrinoid activases act as catalytic monomers, unlike other enzymes that couple ATP hydrolysis to difficult reductions.

Microbiology↗

A Level Set Model for Structured Mesh Representation of Fibrous Preforms used in Composites Manufacturing

Here, a model for implicit representation of fibrous and woven preforms used for composites manufacturing is described. The method is based on a level set function defined on a structured mesh to implicitly capture the complex fiber and weave geometries. Since most software packages used to model woven preforms are based on unstructured mesh, a numerical model for transforming a discretized surface to a structured mesh representation and vice-a-versa is presented. Specific emphasis is on scalable computation of a level set function for large and complex 3D woven structures from a triangulated surface of the smallest unit (yarn). The model is applied to capture a periodic 3D layered 5-harness satin (5HS) weave geometry on a structured mesh. Geometric transformations needed to efficiently compute the level set function for the 3D structure on a high resolution mesh are described. Effects of mesh resolution on the geometric features such as number of resolved fibers, effective fiber size, and the surface area to volume ratio of the iso-surface are analyzed. Using the distance property of the level set function, an approach to evaluate the structure function resulting from transient evolving topology representing densification due to matrix phase depositions is also presented. The approach captures transition of the geometric characteristic from fiber governed at early stages of densification to yarn governed at the terminal stage.

36 MATERIALS SCIENCE↗

Molecular engineering of fluoroether electrolytes for lithium metal batteries

Fluoroether solvents are promising electrolyte candidates for high-energy-density lithium metal batteries, where high ionic conductivity and oxidative stability are important metrics for design of new systems. Recent experiments have shown that these performance metrics, particularly stability, can be tuned by changing the fraction of ether and fluorine content. However, little is known about how different molecular architectures influence the underlying ion transport mechanisms and conductivity. Here, we use all-atom molecular dynamics simulations to elucidate the ion transport and solvation characteristics of fluoroether chains of varying length, and having different ether segment and fluorine terminal group contents. The design rules that emerge from this effort are that solvent size determines lithium-ion transport kinetics, solvation structure, and solvation energy. In particular, the mechanism for lithium-ion transport is found to shift from ion hopping between solvation sites located in different fluoroether chains in short-chain solvents, to ion–solvent co-diffusion in long-chain solvents, indicating that an optimum exists for molecules of intermediate length, where hopping is possible but solvent diffusion is fast. Consistent with these findings, our experimental measurements reveal a non-monotonic behavior of the effects of solvent size on lithium-ion conductivity, with a maximum occurring for medium-length solvent chains. Finally, a key design principle for achieving high ionic conductivity is that a trade-off is required between relying on shorter fluoroether chains having high self-diffusivity, and relying on longer chains that increase the stability of local solvation shells.

25 ENERGY STORAGE↗

Josephson dynamics in two-dimensional ring-shaped condensates

We investigate Josephson transport in a fully closed, two-dimensional superfluid circuit formed by a ring-shaped 87 Rb Bose-Einstein condensate that contains two optical barriers acting as movable weak links. Translating these barriers at controlled speeds imposes a steady bias current, enabling direct mapping of the current-chemical-potential (𝐼−Δ⁢𝜇) characteristics. For narrow junctions (𝑤 ≈ 1µ⁢m), the circuit exhibits a pronounced dc branch that terminates at a critical current 𝐼 𝑐 = 9⁢(1) × 10 3 s −1 ; above this threshold, the system switches to an ac, resistive regime. Classical-field simulations that include the moving barriers quantitatively reproduce both the nonlinear 𝐼−Δ⁢𝜇 curve and the measured 𝐼 𝑐 , validating the underlying microscopic picture. Analysis of the ensuing phase dynamics shows that dissipation is mediated by the nucleation and traversal of vortex-antivortex pairs through the junctions, while the bulk condensate remains globally phase locked—direct evidence of the ring's topological constraint enforcing quantized circulation. These results establish a cold-atom analog of a superconducting quantum interference device in which Josephson dynamics can be resolved at the single-vortex level, providing a versatile platform for atomtronic circuit elements, nonreciprocal Josephson devices, and on-chip Sagnac interferometers for multiaxis rotation sensing.

74 ATOMIC AND MOLECULAR PHYSICS↗