Search NASA⌕ Search

SEARCH · Search NASA

Results for “topological engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Defect engineering of porous aromatic frameworks via end capping improves dioxane removal from water

Amorphous porous organic polymers show promise for energy-efficient adsorptive separations, but it is difficult to understand or improve their performance through intentional structural modification. Herein, we report the synthesis of porous aromatic frameworks (PAFs) with pore structures tailored by the incorporation of a monofunctionalized end-capping monomer that disrupts framework topology. Combining experimental characterization with molecular simulations, we show that this defect engineering strategy yields less densely crosslinked networks, which leads to pore collapse and the presence of unique adsorption sites. These defect-engineered PAFs exhibit enhanced removal of 1,4-dioxane, an important environmental pollutant, from water. Increasing the concentration of end-capping monomers produces PAFs with narrower pore size distributions and improved 1,4-dioxane uptake. These results illustrate that defect engineering can effectively modulate polymer connectivity and porosity for applications in selective adsorptive separations. In conclusion, this technique avoids post-synthetic treatments and presents another approach to tailor amorphous polymeric adsorbents.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Higher-order topology induced by structural buckling

Abstract Higher-order topological insulator (HOTI) states, such as two-dimension (2D) HOTI featured with topologically protected corner modes at the intersection of two gapped crystalline boundaries, have attracted much recent interest. However, the physical mechanism underlying the formation of HOTI states is not fully understood, which has hindered our fundamental understanding and discovery of HOTI materials. Here we propose a mechanistic approach to induce higher-order topological phases via structural buckling of 2D topological crystalline insulators (TCIs). While in-plane mirror symmetry is broken by structural buckling, which destroys the TCI state, the combination of mirror and rotation symmetry is preserved in the buckled system, which gives rise to the HOTI state. We demonstrate that this approach is generally applicable to various 2D lattices with different symmetries and buckling patterns, opening a horizon of possible materials to realize 2D HOTIs. The HOTIs so generated are also shown to be robust against buckling height fluctuation and in-plane displacement. A concrete example is given for the buckled $\beta $-Sb monolayer from first-principles calculations. Our finding not only enriches our fundamental understanding of higher-order topology, but also opens a new route to discovering HOTI materials.

42 ENGINEERING↗
DOE OSTI2024

Topological valley Hall polariton condensation

A photonic topological insulator features robust directional propagation and immunity to defect perturbations of the edge/surface state. Exciton-polaritons, that is, the hybrid quasiparticles of excitons and photons in semiconductor microcavities, have been proposed as a tunable nonlinear platform for emulating topological phenomena. However, mainly due to excitonic material limitations, experimental observations so far have not been able to enter the nonlinear condensation regime or only show localized condensation in one dimension. Here, in this study, we show a topological propagating edge state with polariton condensation at room temperature and without any external magnetic field. We overcome material limitations by using excitonic CsPbCl 3 halide perovskites with a valley Hall lattice design. The polariton lattice features a large bandgap of 18.8 meV and exhibits strong nonlinear polariton condensation with clear long-range spatial coherence across the critical pumping density. The geometric parameters and material composition of our nonlinear many-body photonic system platform can in principle be tailored to study topological phenomena of other interquasiparticle interactions. Polariton condensation of topological propagating edge states is demonstrated with halide perovskite microcavities.

42 ENGINEERING↗
DOE OSTI2022

A Boundary Topology Optimization Approach for Lightweighting Electric Machines Inspired by Additive Manufacturing

Minimizing the mass in electric machines while maintaining superior performance has become a new requirement for the advancement of drivetrains used in wind energy and electric mobility. Topology optimization for light-weighting electric machines using traditional approaches typically explore a restricted design space allowed by standard parametrizable geometry and manufacturing, while advanced methods like cell-based density approaches suffer from a lack of robust manufacturability constraints during the optimization process. To overcome these drawbacks, we explore a grid-independent, boundary TO where the outer shape of the magnet is parameterized using Bezier curves. We conduct a design of experiments (DOE) to study the effect of different magnet shapes on machine performance by varying the control points on the Bezier curves. A machine-learning based surrogate model is constructed using the data from the DOE to quantify the relationship between the control points, air-gap torque and mass. The control points are then optimized to maximize the torque density. The approach is used for minimizing electrical steel mass in the IEA-15MW radial flux direct-drive wind turbine generator. The free-from boundary TO resulted in smooth and concise shapes that can be easily additively manufactured with upto 20-ton reduction in electrical steel mass.

additive manufacturing↗
DOE OSTI2022

A New Shape Optimization Approach for Lightweighting Electric Machines Inspired by Additive Manufacturing

Minimizing the mass in electric machines while maintaining superior performance is a new requirement for the advancement of drivetrains used in wind energy and electric mobility. Topology optimization (TO) for lightweighting electric machines using traditional approaches typically explores a restricted design space allowed by standard parametrizable geometry and manufacturing, while advanced methods, such as cell-based density approaches, suffer from a lack of robust manufacturability constraints during the optimization process. To overcome these drawbacks, we explore a grid-independent, boundary optimization where the outer shape of the magnet is parameterized using Bezier curves. We conduct a design of experiments (DOE) to study the effect of different magnet shapes on machine performance by varying the control points on the Bezier curves. A machine-learning-based surrogate model is constructed using the data from the DOE to quantify the relationship between the control points, air-gap torque, and mass. The control points are then optimized to maximize the torque density. The approach is used for minimizing electrical steel mass in the International Energy Agency (IEA) 15-MW radial flux direct-drive wind turbine generator. The new approach to shape optimization resulted in smooth and concise shapes that can be easily additively manufactured with up to a 20-ton reduction in electrical steel mass.

additive manufacturing↗
DOE OSTI2025

Realizing tunable Fermi level in SnTe by defect control

The tuning of the Fermi level in tin telluride, a topological crystalline insulator, is essential for accessing its unique surface states and optimizing its electronic properties for applications such as spintronics and quantum computing. In this study, we demonstrate that the Fermi level in tin telluride can be effectively modulated by controlling the tin concentration during chemical vapor deposition synthesis. By introducing tin-rich conditions, we observed a blue shift in the x-ray photoelectron spectroscopy core-level peaks of both tin and tellurium, indicating an upward shift in the Fermi level. Further, this shift is corroborated by a decrease in work function values measured via ultraviolet photoelectron spectroscopy, confirming the suppression of Sn vacancies. Our findings provide a low-cost, scalable method to achieve tunable Fermi levels in tin telluride, offering a significant advancement in the development of materials with tailored electronic properties for next-generation technological applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Defect Equilibria from First Principles: From Widegap Oxides to Topological Semimetals

Materials functionality and performance is rarely determined by the ideal crystal alone but is usually affected by formation of imperfections and the solution of impurities. In some applications, such as solar thermochemical hydrogen generation, defect formation is the fundamentally enabling mechanism of the desired functionality. In other cases, such as Cd3As2 topological semimetals, unintentional self-doping presents an obstacle to the access to the unique electronic properties. In either case, a quantitative understanding of the relevant defect mechanism is essential for developing design strategies. This presentation will touch upon numerous aspects in the computational simulation of defect equilibria, including non-equilibrium design strategies, the coupling of solid state and gas-phase reactions, dopant-defect and defect-defect interactions, both attractive and repulsive, the accuracy of total energy functionals and electronic structure methods, and the role of the shape of the density of states for the charge balance condition and Fermi level position, as well as machine-learning prediction of defect energies (1). Specific materials systems include Ga2O3 (2), Cd3As2 (3), and (Sr,Ce)MnO3 (4). (1) M.D. Witman, A. Goyal, T. Ogitsu, A.H. McDaniel, S. Lany, Nat. Comput. Sci. 3, 675 (2023). (2) A. Goyal, A. Zakutayev, V. Stevanovic, S. Lany, J. Appl. Phys. 129, 245704 (2021). (3) C. Brooks, M. van Schilfgaarde, D. Pashov, J.N. Nelson, K. Alberi, D.S. Dessau, S. Lany, Phys. Rev. B 107, 224110 (2023). (4) A. Goyal, M.D. Sanders, R.P. O'Hayre, S. Lany, PRX Energy 3, 013008 (2024).

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗
DOE OSTI2021

Band Engineering of Dirac Semimetals Using Charge Density Waves

New developments in the field of topological matter are often driven by materials discovery, including novel topological insulators, Dirac semimetals and Weyl semimetals. In the last few years, large efforts have been performed to classify all known inorganic materials with respect to their topology. Unfortunately, a large number of topological materials suffer from non-ideal band structures. For example, topological bands are frequently convoluted with trivial ones, and band structure features of interest can appear far below the Fermi level. This leaves just a handful of materials that are intensively studied. Finding strategies to design new topological materials is a solution. Here we introduce a new mechanism that is based on charge density waves and non-symmorphic symmetry to design an idealized Dirac semimetal. We then show experimentally that the antiferromagnetic compound GdSb 0.46 Te 1.48 is a nearly ideal Dirac semimetal based on the proposed mechanism, meaning that most interfering bands at the Fermi level are suppressed. Finally, its highly unusual transport behavior points to a thus far unknown regime, in which Dirac carriers with Fermi energy very close to the node seem to gradually localize in the presence of lattice and magnetic disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Level set topology optimization in Firedrake

Lestofire is an academic software for the automated design of engineering components. It finds the optimal geometry of a system to minimize a given cost function while constrained by a given set of physics equations. Using a level set function to describe the geometry, lestofire uses shapes derivative to evolve the system until its optimal shape. It leverages the compilation of variational forms in Firedrake (https://www.firedrakeproject.org/) and the automated calculation of shape derivatives via pyadjoint (http://www.dolfin-adjoint.or/en/latest/) to allow fast prototyping of different physics, cost functions and design parametrizations.

Salazar De Troya, Miguel↗
DOE OSTI2024

Simultaneous shape and topology optimization of inflatable soft robots

Simultaneous shape and topology optimization is used to design pressure-activated inflatable soft robots. The pressure loaded boundary is meshed conformingly and shape optimized, while the morphology of the robot is topology optimized. The design objective is to exert maximum force on an object, i.e. to produce soft “grippers”. The robot’s motion is modeled using nearly incompressible finite deformation hyperelasticity. To ensure stability of the robot, the buckling load factors obtained via linearized buckling analyses are constrained. The finite element method is used to evaluate the optimization cost and constraint functions and the adjoint method is employed to compute their sensitivities. The numerical examples produce pressure-driven soft robots with varying complexity. We also compare our simultaneous optimization results to those obtained via sequential topology and then shape optimization.

42 ENGINEERING↗
DOE OSTI2020

Superconductivity enhancement in phase-engineered molybdenum carbide/disulfide vertical heterostructures

Stacking layers of atomically thin transition-metal carbides and two-dimensional (2D) semiconducting transition-metal dichalcogenides, could lead to nontrivial superconductivity and other unprecedented phenomena yet to be studied. In this work, superconducting α-phase thin molybdenum carbide flakes were first synthesized, and a subsequent sulfurization treatment induced the formation of vertical heterolayer systems consisting of different phases of molybdenum carbide—ranging from α to γ' and γ phases—in conjunction with molybdenum sulfide layers. These transition-metal carbide/disulfide heterostructures exhibited critical superconducting temperatures as high as 6 K, higher than that of the starting single-phased α-Mo 2 C (4 K). We analyzed possible interface configurations to explain the observed moiré patterns resulting from the vertical heterostacks. Our density-functional theory (DFT) calculations indicate that epitaxial strain and moiré patterns lead to a higher interfacial density of states, which favors superconductivity. Such engineered heterostructures might allow the coupling of superconductivity to the topologically nontrivial surface states featured by transition-metal carbide phases composing these heterostructures potentially leading to unconventional superconductivity. Moreover, we envisage that our approach could also be generalized to other metal carbide and nitride systems that could exhibit high-temperature superconductivity.

heterostructure↗
DOE OSTI2024

Revealing the three-dimensional arrangement of polar topology in nanoparticles

In the early 2000s, low dimensional ferroelectric systems were predicted to have topologically nontrivial polar structures, such as vortices or skyrmions, depending on mechanical or electrical boundary conditions. A few variants of these structures have been experimentally observed in thin film model systems, where they are engineered by balancing electrostatic charge and elastic distortion energies. However, the measurement and classification of topological textures for general ferroelectric nanostructures have remained elusive, as it requires mapping the local polarization at the atomic scale in three dimensions. Here we unveil topological polar structures in ferroelectric BaTiO3 nanoparticles via atomic electron tomography, which enables us to reconstruct the full three-dimensional arrangement of cation atoms at an individual atom level. Our three-dimensional polarization maps reveal clear topological orderings, along with evidence of size-dependent topological transitions from a single vortex structure to multiple vortices, consistent with theoretical predictions. The discovery of the predicted topological polar ordering in nanoscale ferroelectrics, independent of epitaxial strain, widens the research perspective and offers potential for practical applications utilizing contact-free switchable toroidal moments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Matryoshka phonon twinning in α-GaN

Understanding lattice dynamics is crucial for effective thermal management in electronic devices because phonons dominate thermal transport in most semiconductors. α -GaN has become a focus of interest as one of the most important third-generation power semiconductors, however, the knowledge on its phonon dynamics remains limited. Here we show a Matryoshka phonon dispersion of α -GaN with the complementary inelastic X-ray and neutron scattering techniques and the first-principles calculations. Such Matryoshka twinning throughout the basal plane of the reciprocal space is demonstrated to amplify the anharmonicity of the related phonons through creating abundant three-phonon scattering channels and cutting the lifetime of affected modes by more than 50%. Such phonon topology contributes to reducing the in-plane thermal transport, thus the anisotropic thermal conductivity of α -GaN. The results not only have implications for engineering the thermal performance of α -GaN, but also offer valuable insights on the role of anomalous phonon topology in thermal transport of other technically semiconductors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A Unified View of Topological Phase Transition in Band Theory

We develop a unified view of topological phase transitions (TPTs) in solids by revising the classical band theory with the inclusion of topology. Reevaluating the band evolution from an “atomic crystal” (a normal insulator (NI)) to a solid crystal, such as a semiconductor, we demonstrate that there exists ubiquitously an intermediate phase of topological insulator (TI), whose critical transition point displays a linear scaling between electron hopping potential and average bond length, underlined by deformation-potential theory. The validity of the scaling relation is verified in various two-dimensional (2D) lattices regardless of lattice symmetry, periodicity, and form of electron hoppings, based on a generic tight-binding model. Significantly, this linear scaling is shown to set an upper bound for the degree of structural disorder to destroy the topological order in a crystalline solid, as exemplified by formation of vacancies and thermal disorder. Our work formulates a simple framework for understanding the physical nature of TPTs with significant implications in practical applications of topological materials.

42 ENGINEERING↗
DOE OSTI2024

High-entropy engineering of the crystal and electronic structures in a Dirac material

Dirac and Weyl semimetals are a central topic of contemporary condensed matter physics, and the discovery of new compounds with Dirac/Weyl electronic states is crucial to the advancement of topological materials and quantum technologies. Here we show a widely applicable strategy that uses high configuration entropy to engineer relativistic electronic states. We take the A MnSb 2 ( A = Ba, Sr, Ca, Eu, and Yb) Dirac material family as an example and demonstrate that mixing of Ba, Sr, Ca, Eu and Yb at the A site generates the compound (Ba 0.38 Sr 0.14 Ca 0.16 Eu 0.16 Yb 0.16 )MnSb 2 (denoted as A 5 MnSb 2 ), giving access to a polar structure with a space group that is not present in any of the parent compounds. A 5 MnSb 2 is an entropy-stabilized phase that preserves its linear band dispersion despite considerable lattice disorder. Although both A 5 MnSb 2 and A MnSb 2 have quasi-two-dimensional crystal structures, the two-dimensional Dirac states in the pristine A MnSb 2 evolve into a highly anisotropic quasi-three-dimensional Dirac state triggered by local structure distortions in the high-entropy phase, which is revealed by Shubnikov–de Haas oscillations measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Topological and thermoelectric properties of double antiperovskite pnictides

Doubling the perovskite cell (double perovskite) has been found to open new possibilities for engineering functional materials, magnetic materials in particular. This route should be applicable to the antiperovskite (aPV) class. In the pnictide based double aPV (2aPV) class introduced here magnetism is very rare, and we address them as new topological materials, possibly with thermoelectric interest. We have found that the 2aPV supercell provides a systematically larger band gap that can serve to inhibit bulk conductivity, and also large spin–orbit coupling for band inversion. We present examples from a broad study of double antiperovskites focusing on the X 6 AA'B 2 configuration, where X is the alkaline earth element and A and B are the group 5A pnictogens. We find that an 'extended s' state at the valence band minimum, described alternatively as a cation valence state or a modulated interstitial planewave state, plays a crucial role in both topological and thermoelectric properties. Several of these compounds may house topological phases, while transport calculations indicate they may also find themselves useful in thermoelectric applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗