Search NASA⌕ Search

SEARCH · Search NASA

Results for “transmutation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Summary of Thermocouple Performance in the Advanced Gas Reactor Experiment AGR-5/6/7 During Irradiation in the Advanced Test Reactor

The Advanced Gas Reactor -5/6/7 (AGR-5/6/7) experiment was the fourth and final experiment in the AGR experiment series and completed irradiation in July 2020. It serves as the formal fuel qualification test for the TRISO fuels under development by the US Department of Energy. This experiment was designed to irradiate fuel particles at temperatures ranging from 800°C ? 1500°C. The high end of the range created unique challenges for thermocouple-based temperature measurements. Commercially available high-temperature platinum-rhodium thermocouples (Types S, R, and B) and tungsten-rhenium thermocouples (Type C) suffer rapid decalibration due to transmutation of the thermoelements from neutron absorption. A special low neutron cross-section thermocouple system based on molybdenum/niobium thermoelements called High Temperature Irradiation Resistant thermocouple (HTIR-TC) has been under development at INL since circa 2004. Several examples of this thermocouple type were incorporated into regions of the test operating above 1200°C. For regions in the test operating in the 1000°C ? 1200°C range, high-performance versions of Type N thermocouples recently developed at Cambridge University were installed. Standard Type N thermocouples were used in regions of the test operating below 1000°C. A total of 54 thermocouples were incorporated into the test. A report of the performance of this large heterogenous set of thermocouples over the first third of the irradiation was previously provided (ANIMMA 2019). This follow-on paper discusses results from the balance of the experiment (Feb 2019 - July 2020). Special attention is focused on potential drift of thermocouples operating in the higher temperature regions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Summary of Thermocouple Performance in the Advanced Gas Reactor Experiment AGR-5/6/7 During Irradiation in the Advanced Test Reactor

This is a conference presentation ppt file. The following abstract is for the entire conference paper - which will later be the subject of a PRS artifact The Advanced Gas Reactor -5/6/7 (AGR-5/6/7) experiment was the fourth and final experiment in the AGR experiment series and completed irradiation in July 2020. It serves as the formal fuel qualification test for the TRISO fuels under development by the US Department of Energy. This experiment was designed to irradiate fuel particles at temperatures ranging from 800°C ? 1500°C. The high end of the range created unique challenges for thermocouple-based temperature measurements. Commercially available high-temperature platinum-rhodium thermocouples (Types S, R, and B) and tungsten-rhenium thermocouples (Type C) suffer rapid decalibration due to transmutation of the thermoelements from neutron absorption. A special low neutron cross-section thermocouple system based on molybdenum/niobium thermoelements called High Temperature Irradiation Resistant thermocouple (HTIR-TC) has been under development at INL since circa 2004. Several examples of this thermocouple type were incorporated into regions of the test operating above 1200°C. For regions in the test operating in the 1000°C ? 1200°C range, high-performance versions of Type N thermocouples recently developed at Cambridge University were installed. Standard Type N thermocouples were used in regions of the test operating below 1000°C. A total of 54 thermocouples were incorporated into the test. A report of the performance of this large heterogenous set of thermocouples over the first third of the irradiation was previously provided (ANIMMA 2019). This follow-on paper discusses results from the balance of the experiment (Feb 2019 - July 2020). Special attention is focused on potential drift of thermocouples operating in the higher temperature regions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Dynamic System Scaling Application to Accelerated Nuclear Fuel Testing

The development of nuclear fuel and materials requires a continuous effort to investigate the acute and prolonged effects of irradiation, thermal-material stress, chemical change, or other conceivable damage mechanics acquired during normal operation or accident scenarios throughout its lifetime. As in-core fuel property measurement techniques advance to support in the real-time, non-invasive, and enhanced accuracy realm, it is the future of fuel development to pursue to higher degrees of control, predictability of integral test behavior via separate effects test (SET), and shorter test time intervals. The fuel development life cycle from initial concept to commercial licensing is approximated to be 20 years and current literature suggests by optimizing fuel performance codes with SETs, the process could possibly be compressed to 5 to 10 years. Recently, a research group in the Idaho National Laboratory (INL) is testing reduced scale fuel rods and increased power density to accelerate evolution of fuel phenomena in metallic fuels. In support of nuclear fuel rod development, compressing fuel test process, and accelerating fuel phenomena, it was the purpose of this study to investigate nuclear fuel performance phenomena via literature review and effectively scale the initial conditions, boundary conditions, and geometric properties to describe the time-dependent response including to fuel burnup, thermal and mechanical stress, transmutations and inter-diffusion, and other relevant observed phenomena. The study was based on BISON simulations of historic EBR-II metallic fuel experiments and Dynamical System Scaling (DSS) method are utilized to assess effects of scaling activity including fuel phenomena acceleration and calculations of time-dependent distortions. The research successfully scaled metallic fuel phenomena, accelerated fuel testing, and assessed the distortions for each scaled case derived.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Sensitivity Studies, Gap Analysis, and Benchmark Experiment Optimization for Reactor Applications

In regards to nuclear data, some reactor applications may lack validation experiments, which reduces confidence in predicted results. This is especially true for emerging advanced reactor, micro reactor, and Accelerator Driven System (ADS) designs. This work presents an approach to design new criticality experiments that have similar k eff cross section sensitivities to an application of interest. This process involves simulations to generate cross-section sensitivities to a parameter of interest (such as k eff ), a gap analysis to determine which existing benchmarks are most similar to the application, and an experiment optimization. This work focuses on cross-section sensitives and gap analysis for three examples relevant to the reactor physics community including a Travelling Wave Reactor (TWR) type-design, Kilopower (a space reactor design), and a lead-bismuth eutectic cooled accelerator-driven system (ADS) to transmute minor actinides.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Modeling and Simulation of Fuel Burnup in Pebble Bed Reactors

Modeling and simulation of fuel burnup plays important roles in reactor design, operation, safety, and security as well as nuclear material control and accounting (MC&A) [1]. This task is uniquely challenging for pebble bed reactors (PBR) because the pebbles are continuously added and recycled into the reactor core, and their paths through the core are random. To address this problem, we present two simulation models in this paper. Brookhaven National Laboratory (BNL) developed a simple lattice model of a PBR in Serpent software to generate used pebble isotopic concentrations. The benefit of using Serpent software in this specific application is that it helps streamline the data generation process without having to use too many independent software codes in combination to achieve a simple task. For example, transport, burnup and zero power decay can be implemented in a single pass. Three-dimensional core models were developed using Serpent to simulate the burnup process of 5 subject pebbles starting from fresh till they reach nearly target burnup, with each pebble placed in one of the five artificially designated radial channels to capture the changing neutron spectra along the core radius. Equilibrium isotopic concentrations were assumed in all other pebbles in the core. To provide a verification for the Serpent isotope transmutation and decay results, Oak Ridge National Laboratory (ORNL) performed simple SCALE/ORIGEN calculations using the average neutron spectra calculated by Serpent for each of the 5 pebbles. The 252-group neutron spectra from Serpent were then used by ORIGEN to produce the one-group library for depletion and decay calculations. The isotopic concentrations of a few nuclides of interest and neutron and gamma source terms produced from the ORIGEN calculations were compared with the ones from the Serpent calculations. The model simulated in this work was based on the Pebble Bed Modular Reactor (PBMR)-400 design because many data needed for the simulation such as core power profiles, fuel and reflector temperatures, and equilibrium core composition are publicly available. In this paper, we will compare the results between these two approaches and benchmark the results against a set of well-established simulation results for PBMR-400.

Dim, Odera↗
DOE OSTI2023

Modeling and Simulation of Fuel Burnup in Pebble Bed Reactors

Modeling and simulation of fuel burnup plays important roles in reactor design, operation, safety, and security as well as nuclear material control and accounting (MC&A) [1]. This task is uniquely challenging for pebble bed reactors (PBR) because the pebbles are continuously added and recycled into the reactor core, and their paths through the core are random. To address this problem, we present two simulation models in this paper. Brookhaven National Laboratory (BNL) developed a simple lattice model of a PBR in Serpent software to generate used pebble isotopic concentrations. The benefit of using Serpent software in this specific application is that it helps streamline the data generation process without having to use too many independent software codes in combination to achieve a simple task. For example, transport, burnup and zero power decay can be implemented in a single pass. Three-dimensional core models were developed using Serpent to simulate the burnup process of five subject pebbles starting from fresh till they reach nearly target burnup, with each pebble placed in one of the five artificially designated radial channels to capture the changing neutron spectra along the core radius. Equilibrium isotopic concentrations were assumed in all other pebbles in the core. To provide a verification for the Serpent isotope transmutation and decay results, Oak Ridge National Laboratory (ORNL) performed simple SCALE/ORIGEN calculations using the average neutron spectra calculated by Serpent for each of the five pebbles. The 252-group neutron spectra from Serpent were then used by ORIGEN to produce the one-group library for depletion and decay calculations. The isotopic concentrations of a few nuclides of interest and neutron and gamma source terms produced from the ORIGEN calculations were compared with the ones from the Serpent calculations. The model simulated in this work was based on the Pebble Bed Modular Reactor (PBMR)-400 design because many data needed for the simulation such as core power profiles, fuel and reflector temperatures, and equilibrium core composition are publicly available. In this paper, we will compare the results between these two approaches and benchmark the results against a set of well-established simulation results for PBMR-400.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

Neutronic analysis of a PWR-type SMR core using duplex ThO{sub 2}-UO{sub 2} in TRISO fuel particles

Currently, studies on small modular reactors (SMRs) present an important development due to the potential they represent in terms of safety, operational flexibility, economy, and non-energy applications. Furthermore, there is increasing interest in studying the use of thorium as fuel, as an effective way to solve problems such as the shortage of uranium reserves, reduction of nuclear waste and nuclear proliferation. Also, the use of thorium combined with highly enriched uranium TRISO particles has been studied, showing proper performance. In this work, the concept of ThO{sub 2}-UO{sub 2} duplex fuel is used, for the core configuration of a PWR type SMR that uses TRISO fuel, designed to achieve extended fuel cycles. Three distribution cases of ThO{sub 2} and UO{sub 2} in TRISO particles inside the fuel rods are compared. First, particles composed by a homogeneous mixture of ThO{sub 2} and UO{sub 2} are distributed inside of fuel elements. Second, the fuel zone of the fuel elements is divided into two radially, an internal one where the TRISO particles composed of ThO{sub 2} are distributed and the external one where the TRISO particles composed of UO{sub 2} are distributed. The third case is like the previous one, except that the particles that contain UO{sub 2} are distributed in the inner zone and those that contain ThO{sub 2} in the outer zone of the fuel elements. The comparison of the cases is carried out in terms of cycle main isotopes' mass transmutation, power distribution and temperature reactivity coefficients. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

MAGNETICALLY SUSPENDED CANNED ROTOR PUMPS FOR THE INTEGRAL MOLTEN SALT REACTOR

This project developed a molten salt pump design for small modular reactors, concentrated solar, and Gen IV nuclear reactors with a magnetically levitated rotor that can operate at temperatures of up to 700 °C. This eliminates the need for rotating seals and roller element bearings which require maintenance and are prone to failure. The pump design is also more compact than existing molten salt pump designs which require long shafts to thermally isolate the electric motor. The aims of the project are to: 1) design and test the molten salt pump, 2) develop and test a high temperature position sensor needed for magnetic bearing control, and 3) develop and test high temperature coil fabrication methods for electric motor and magnetic bearing fabrication. To develop the high temperature coils, conductor materials were analyzed for oxidation, diffusion, cladding, and resistivity. Of the candidate conductor materials that met the requirements, silver was chosen. The long-term impact of radiation on silver resistivity was analyzed by developing a model of a generic molten salt fast reactor to model the conductor irradiation in worst case scenarios. The analysis showed that increased resistivity due to transmutation of silver decreases exponentially with the reactor reflector thickness. Different electrical insulation materials were tested and the final high temperature coils developed were able to withstand conductor to ground voltages up to 1800 V before insulation breakdown. Magnetic bearings require high-precision high-speed measurements of the rotor position to operate. Current commercial position sensors can only operate up to 550 °C so a novel position sensor was developed that can operate up to 800 °C. These sensors were also designed to measure the position of the metallic rotor through a thin metallic corrosion barrier that protects that coils, insulation, and magnetic cores so that the salt containment barrier does not have any penetrations. The high-temperature sensor was tested and had comparable performance to commercially available inductive position sensors. The sensor design and signal processing has led to several invention disclosures. The magnetically levitated molten salt pump design was completed and analyzed. The chloride salt test loop at Oak Ridge National Laboratory was chosen to test the pump and the pump hydraulics and power were designed for the test loop flow and pressure requirements. Classes of motor designs that do not utilize permanent magnetic were considered for the high-temperature motor. After extensive analysis of their performance, a synchronous reluctance motor was chosen for the pump. The design was refined and analyzed to optimize performance. The magnetic bearings were designed to meet the force and frequency requirements necessary to levitate the rotor and reject disturbances from rotor imbalance, motor forces, and hydraulic forces. Compliant mounts for the position sensors were designed that would not damage the ceramic sensor components and maintain sensor alignment over a wide temperature range. A thermal hydraulic analysis of the molten salt coolant flow used to cool the rotor and stator was performed to ensure that the maximum temperature in the rotor and stator will not exceed 725 °C. The corrosion barrier and casing were designed to maintain the salt fluid boundary by using compliant features to absorb large expansion mismatches due to different coefficients of thermal expansion (CTE). Finally, the salt drain and fill systems were designed along with the pump support structure, integration with the test loop, and thermal insulation and heating. Corrosion barrier fabrication experiments were performed to assess using laser cladding to apply a sub-millimeter corrosion barrier to the surface of a Fe-Co-V magnetic core material. The cladding method showed minimal mixing between materials at their interface and withstood temperature cycling without damage to the cladding. The technology commercialization is focused on the high-temperature position sensors and there has been significant interest from the nuclear industry in utilizing these sensors along with some interest from the aerospace industry. The project also led to a research collaboration with a fusion energy industrial partner to study barriers to scaling the pump design from the kW size to the MW size. This research collaboration will also study methods to create high-temperature coils that have conductor to ground breakdown voltages above 5 kV. The successful development of high-temperature electromagnetic coils and high-temperature position sensors greatly increases the temperature limits for electromagnetic devices that don’t rely on permanent magnets. This includes electric motors, magnetic bearings, linear actuators, rotary position and velocity sensing, actuated valves, and generators to name a few. This will fill a current need in molten salt reactors, concentrated solar, and fusion energy for these critical peripheral devices needed for practical reactor designs that do not currently have commercial solutions.

Hines, J Wesley↗
DOE OSTI2023

The Jupiter High-240 Experiment

The Jupiter High-240 experiment was performed in May of 2019 by researchers from Los Alamos National Laboratory (LANL) at the National Criticality Experiments Research Center (NCERC) in the Device Assembly Facility (DAF) located at the Nevada National Security Site (NNSS). This experiment has previously been mentioned briefly in prior publication related to a collaborative effort with the Japan Atomic Energy Agency (JAEA) to assess lead void coefficients of reactivity in uranium- and plutonium-fueled systems with lead. This series of experiments supports JAEA’s research into the development of an accelerator driven transmutation system for spent nuclear fuel. The Jupiter High-240 experiment built upon the previous Jupiter experiment by incorporating plutonium fuel plates with higher 240 Pu content. Efforts to formally benchmark the original Jupiter experiment have continued for inclusion in the benchmark handbook of the International Criticality Safety Benchmark Evaluation Project (ICSBEP). Whereas there is much similarity between the two Jupiter experiments, there is a desire to also evaluate and benchmark this second experiment to further contribute towards the availability of lead-sensitive benchmarks. The components utilized in these two experiments have also been used to perform other subcritical and Rossi-α measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Advanced Fuels Campaign Execution Plan

The Advanced Fuels Campaign (AFC) Execution Plan outlines the strategy, mission, scope, near-term and long-term goals, structure, and organization associated with nuclear fuels and materials research, development, and demonstration activities within the Department of Energy’s (DOE) Nuclear Fuel Cycle and Supply Chain (NFCSC) program. NFCSC has been given responsibility to identify and mature advanced fuel technologies for the DOE using a science-based approach, focused on developing a fundamental understanding of nuclear fuels and materials to drive development of integrated nuclear fuel and materials technology. This science-based approach combines theory, experiments, and multiscale modeling and simulation to achieve a predictive understanding of relevant behaviors ranging from fuel fabrication processes (and their resulting fuel microstructures) through fuel/cladding performance under irradiation (in contrast to more empirical, observation-based approaches frequently used in fuel performance modeling and fuel qualification). The traditional scope of AFC includes the evaluation and development of multiple fuel forms to support two fuel cycle options: once-through and full recycle. The word “fuel” is used generically to include conventional fuels, transmutation targets, and any associated cladding or duct materials. The once-through fuel cycle addresses advanced light water reactor fuels with enhanced performance, extended burnup, and reduced waste generation. In fiscal year (FY) 2012, AFC’s scope expanded to include research, development, and demonstration (RD&D) for light water reactor (LWR) fuels with enhanced accident tolerance. Fuel fabrication activities include the development of innovative methods to enhance process efficiencies, reduce waste, and improve control over as-fabricated fuel microstructural properties to achieve desired in-reactor performance. Using modern modeling and simulation approaches, the objective is to predict fresh fuel properties given the feedstock characteristics and fabrication process parameters. The performance-related activities include small-scale, in-reactor, and out-of-reactor phenomenological testing (distinct from, but synergistic with, integral prototypic testing) and extensive, quantitative characterization (focusing on characterization of fuel and cladding materials at the scale of microstructure) both before and after testing. Larger-scale, prototypic experiments are conducted in concert with phenomenological testing to drive a Fuel Development and Qualification program, incorporating a fundamental understanding of fuel behavior performance characteristics. Then, using the tools developed under the productive science-based approach, fuels will be optimized to meet specific performance requirements, thereby minimizing the need to repeatedly perform large-scale, integral experiments over a wide parametric range as a means of experimental exploration. Two significant initiatives are underway within AFC. First, a gap analysis completed in early FY 2019 identified critical irradiation testing needs that are lacking within the national light water reactor (LWR) fuels testbed since the shutdown of the Halden Reactor in 2018. The identified gaps are for instrumented, prototypic testing of LWR fuels, especially under boiling water reactor conditions, ramp conditions, and conditions leading to fuel failure; these needs exist for supporting current LWR fuels and their possible extension to higher burnups, but are especially urgent relative to near-term development and qualification of accident-tolerant fuels. Recommendations that resulted from the Halden Gap Analysis focused on enhancements at Advanced Test Reactor (ATR) and Transient Reactor Test Facility (TREAT) to fill gaps in testing capabilities relative to these needs. Second, a concerted effort to develop and demonstrate a systematic approach to accelerating the development, testing, and qualification of new fuel systems has been initiated. This is highlighted by a test strategy that combines the considerable advances in multiscale, mechanistic fuel modeling of recent years with a MiniFuel separate effects test program in the High Flux Isotope Reactor (HFIR) and a Fission Accelerated Steady-state Testing (FAST) semi-integral accelerated test program in ATR. This approach is being tested/demonstrated using the metallic fuel system, but if successful it is expected to be extensible to multiple fuel types and diverse applications. This document includes an overview of the NFCSC program, a definition of science-based development of nuclear fuels, near-term goals for Advanced LWR fuels (ALFs), and longer-term goals for Advanced Reactor Fuels (ARFs) RD&D. This includes the activities that will be conducted to achieve success toward the grand challenge, as well as the goals and milestones to be achieved over the next few decades of research and development. Long-term goals are based on the DOE Office of Nuclear Energ

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Final report on assessment of molten salt corrosion testing of unirradiated and ion irradiated advanced manufactured high entropy alloys

Generation IV reactors and future fusion reactor designs have led to more demanding materials performance requirements due to their increased operating temperatures, corrosive coolants, and increased radiation doses compared to the current light-water reactor fleet. Among the innovative nuclear technologies under development, molten salt reactors stand out for their potential to offer superior fuel utilization, intrinsic safety characteristics, and economic viability. Of the proposed Generation IV designs, the gas fast reactor operates at 450 to 850°C and the molten salt reactor operates at 565 to 850°C, with the molten salt reactor design needing molten salt corrosion resistant materials [1, 2]. These increased temperatures and more extreme corrosion environments necessitate higher material performance, such as creep strength, radiation-tolerant microstructures, corrosion resistance, and high-temperature tensile properties. Hastelloy-N, a nickel-based alloy with additions of molybdenum and chromium, has been successfully employed to contain molten fluoride salt at temperatures up to 705°C. However, Hastelloy-N becomes embrittled upon neutron irradiation, primarily due to the accumulation of helium produced by (n,a) transmutation reactions. Furthermore, the corrosive nature of molten fluoride and chloride salts presents a formidable challenge, as these salts can react with and dissolve alloying elements such as Cr, Mo, and Fe, leading to selective leaching, loss of protective oxide layers, and accelerated degradation. High entropy alloys (HEAs) and refractory high entropy alloys (RHEAs) have emerged as a prominent area of interest, due to their ability to achieve tailored chemical compositions for specific applications. Unlike conventional alloys, HEAs are characterized by having multiple principal elements in equimolar or near equimolar ratios, leading to an unconventional alloying strategy [3]. This alloying strategy is believed to promote unique properties, such as single-phase stabilization of chemically compatible elements, lattice distortion effects due to atomic radius differences, and proposed sluggish diffusion effects. For extreme-environment applications, RHEAs have garnered much research interest because of the possibility of creating relatively ductile materials that can operate in extremely high-temperature environments, beyond the operating temperatures where other Ni-based superalloys begin to lose strength [4-6]. Idaho National Laboratory (INL) initiated a joint international effort with the Czech Republic to explore the feasibility of manufacturing HEAs for high-temperature nuclear applications using advanced manufacturing. This effort was funded at INL by the United States Department of Energy's Office of Nuclear Energy under the Advanced Reactor Technologies and Advanced Materials and Manufacturing Technologies (AMMT) Program. The HEAs were specifically designed for the corrosive and irradiation environments experienced in gas-cooled fast reactors, molten salt reactors, and fusion power. These alloys have been manufactured by multiple processes to determine the impact of manufacturing processes on the performance of the alloys in corrosive and irradiation environments. Preliminary molten salt corrosion testing showed that equimolar MoNbTiV and MoNbTi alloys exhibit exceptional performance, with arc-melted variants demonstrating only minimal degradation after 1000 hours of exposure to molten chloride salt at 700°C. Conversely, Nb2TiVZr2 showed significant molten salt corrosion susceptibility and microstructural instability during high-temperature molten salt exposures, and was, therefore deemed unfit for molten salt reactor applications. The MoNbTiV, MoNbTi, and Nb2TiVZr2 alloys were further evaluated through ion irradiation experiments conducted at the Michigan Ion Beam Laboratory at the University of Michigan. The microstructural stability and the evolution of irradiation-induced defects were characterized to assess the irradiation resistance of each of these alloys.

36 - MATERIALS SCIENCE↗
DOE OSTI2020

Boron-Made N 2 : Realization of a B$\equiv$B Triple Bond in the B 2 Al 3 – Cluster

Until now, all B≡B triple bonds have been achieved by adopting two ligands in the L→B≡B←L manner. Herein, we report an alternative route of designing the B≡B bonds based on the assumption that by acquiring two extra electrons, an element with the atomic number Z can have properties similar to those of the element with the atomic number Z + 2. Specifically, we show that due to the electron donation from Al to B, the negatively charged B≡B kernel in the B 2 Al 3 – cluster mimics a triple N≡N bond. Comprehensive computational searches reveal that the global minimum structure of B 2 Al 3 – exhibits a direct B–B distance of 1.553 Å, and its calculated electron vertical detachment energies are in excellent agreement with the corresponding values of the experimental photoelectron spectrum. Chemical bonding analysis revealed one σ and two π bonds between the two B atoms, thus confirming a classical textbook B≡B triple bond, similar to that of N 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Depletion capabilities in the OpenMC Monte Carlo particle transport code

A depletion solver has been implemented in OpenMC and is described herein. The depletion solver is implemented in Python and interfaces with OpenMC’s transport solver through a C++ application programming interface, which enables an in-memory transport-depletion coupling. Multiple integration methods for advancing in time have been implemented and exhibit tradeoffs in cost, accuracy, and memory use. For all time integration methods, evaluation of the matrix exponential is performed by using the incomplete partial fraction form of the Chebyshev rational approximation method. Simulations of a pressurized water reactor (PWR) pincell and a sodium-cooled fast reactor (SFR) assembly were carried out with OpenMC and Serpent. For both problems, the use of a high-fidelity depletion chain results in predictions of k eff that agree within 20–30 pcm between OpenMC and Serpent. Predicted actinide concentrations were found to agree to a fraction of a percent, and most fission product concentrations were found to agree within 1%. Here, the few cases where larger differences were observed can be attributed either to differences in how the energy dependence of fission product yields is handled or deficiencies in the nuclear data used. OpenMC simulations of the PWR and SFR problems using a simplified 228-nuclide depletion chain demonstrate that it achieves accuracy close to that of the full, high-fidelity depletion chain with respect to the studied responses.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Review of SiC material development for nuclear fusion applications: Cross-cutting research and emerging opportunities

The SiC-based materials, particularly SiC-fiber-reinforced SiC matrix (SiC/SiC) composites, show strong potential for structural and functional applications in future fusion power plants because they can operate at high temperatures with a range of coolants and breeders, thereby enabling higher energy conversion efficiency. Here, this paper presents recent advancements in the development of SiC-based materials, focusing on processing techniques and material performance and resistance under fusion-relevant environments. The processing activities have emphasized near-net-shape fabrication and the joining of SiC subcomponents, with processing methods and material compositions informed by previous irradiation experiments on various grades of SiC. Research on irradiation effects has remained focused on degradation mechanisms and the microstructural optimization of SiC/SiC composites irradiated to high neutron damage levels. Analysis of irradiation defects in SiC has advanced via the application of cutting-edge characterization methods, among which Raman spectroscopy is becoming a common tool to assess atomic-scale chemical disorder. Fusion–fission crosscutting irradiation research has explored combined effects in SiC/SiC composites with application-relevant geometries, including bowing of SiC/SiC composite channels under neutron flux gradients, stress evolution in SiC/SiC composite tubes under through-thickness temperature gradients, and irradiation-enhanced corrosion in SiC. Finally, research opportunities for component testing and assessment under fusion-relevant conditions, in support of emerging concepts from the private fusion sector, are discussed.

Advanced manufacturing↗
DOE OSTI2021

Neutron irradiation induced defects in oxides and their impact on the oxide properties

Understanding the irradiation-induced defects in oxides is of interest for a wide range of applications. ZnO is an interesting oxide with mixed ionic and covalent bonding that contains a variety of point defect structures—making it an excellent model for studying irradiation-induced defects and their impact on properties. Here, we investigate the effects of neutron irradiation on the formation of defects and on the structural, optical, and electrical properties of ZnO single crystals. We observe the formation of vacancies and voids via positron annihilation spectroscopy. Neutron irradiation led to a significant deterioration of the ZnO structure and formed a high concentration of point defects, vacancy clusters, and voids with large disparities in their structure across variable irradiation times. It also led to significant changes in the optical properties and sample color. Irradiation for 444 h induced a high concentration of Cu acceptors as well as a high concentration of Ga donors. Additionally, temperature-dependent Hall effect measurements revealed the competing production of donors and acceptors and showed an increase in the slope of the carrier freeze-out curve with increasing irradiation dose. This work demonstrates the combined effects of neutron irradiation in producing a wide range of structural defects, impurities, and dopants in oxides and their enormous impact on modifying the oxide structure and both the optical and electronic properties. It particularly emphasizes the importance of considering the production of new impurities and dopants during the neutron irradiation of oxides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Analysis of Second Target Station Target Removal Dose Rates

The Second Target Station (STS) project at Oak Ridge National Laboratory’s spallation neutron source is a crucial initiative for maintaining U.S. leadership in neutron sciences. The STS aims to create the world’s brightest pulsed cold neutron source, enabling cutting-edge research across various scientific disciplines. To ensure safe and efficient maintenance operations, understanding the effects of shutdown dose rates from activated components within the STS target systems is essential. This study establishes a computational framework for calculating decay gamma sources and subsequent shutdown dose rates utilizing advanced methods to account for all activation channels, including high-energy interactions down to thermal neutron capture. This study describes a novel integration of multiple tools and provides an effective means of analyzing activation and shutdown dose rates at spallation neutron facilities. A custom-developed script automates the decay gamma source generation process, ensuring proper sampling during the variance reduction phase, which is critical for accurate predictions of shutdown dose rates.

Transmutation↗
DOE OSTI2022

Proposal and application of ROM-Lasso method for sensitivity coefficient evaluation

We propose a novel method for evaluating sensitivity coefficients of neutronics parameters to cross sections, so-called the reduced-order modeling technique ROM-Lasso. In this method, cross sections of interest are randomly sampled, and corresponding perturbed core analyses are performed. Then, the sensitivity coefficient vector of the higher-level model is expanded via the active subspace bases obtained with the lower-level model whose dimensional complexity is smaller than that of the higher-level model, and the expansion coefficients are estimated by the Lasso regression. A unique feature of the ROM-Lasso method allows the use of different bases optimized for each neutronics parameter. We conducted a verification calculation for an accelerator-driven system and demonstrated that the ROM-Lasso method can reproduce the sensitivity coefficients with a much smaller number of forward calculations than the direct method. The proposed method can be used to practically evaluate sensitivity coefficients. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗