Search NASA⌕ Search

SEARCH · Search NASA

Results for “tree density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Leonid's Particle Analyses from Stratospheric Balloon Collection on Xerogel Surfaces

Recovered from a stratospheric balloon above 20 km on 17-18 November 1998, at least eight candidate microparticles were collected and analyzed from low-density silica xerogel collection plates. Capture time at Leonids' storm peak was validated locally along the balloon trajectory by direct video imaging of meteor fluence up to 24/hr above 98% of the Earth's atmosphere. At least one 30 micron particle agrees morphologically to a smooth, unmelted spherule and compares most closely in non-volatile elemental ratios (Mg/Si, Al/Si, and Fe/Si) to compositional data in surface/ocean meteorite collections. A Euclidean tree diagram based on composition makes a most probable identification as a non-porous stratospherically collected particle and a least probable identification as terrestrial matter or an ordinary chondrite. If of extraterrestrial origin, the mineralogical class would be consistent with a stony (S) type of silicate, olivine [(Mg,Fe)2SiO4] and pyroxene [(Mg, Fe)Si!O3)--or oxides, herecynite [(Fe,Mg) Al2O4].

Noever, David↗
NASA NTRS2000

A Solid Case for Microgravity Processing

Solidification of metals, particularly alloys, is a complicated process. At some sufficiently high temperature, the components comprising an alloy fully mix, producing a single homogeneous liquid. Unfortunately, after this liquid is cast into a mold and allowed to freeze, the resulting solid is usually very inhomogeneous. In most cases the first solid to "freeze out" of the liquid has a composition very close to one of the pure metals. This initially solidifying metal usually comprises microscopic, pine-tree shaped components, collectively referred to as a dendritic array, whose distribution, alignment, and scale directly influence a materials strength and docility. During dendrite growth the adjacent liquid becomes enriched, and consequently, solidifies a much lower temperature and considerably later time. Thus, in the course of solidification, both the solid and the enriched liquid can have compositions (and local temperatures) significantly different from those of the bulk liquid. Different compositions and temperatures imply different densities that, in Earth's gravity, induce motion in the liquid. Such motion promotes formation of a casting that is denser at the bottom and lighter at the top. This condition known as macrosegregation, precludes optimized, uniform material properties.

Grugel, Richard N.↗
NASA NTRSDate not supplied

Interpretable ML Approaches for Novel Solid State Electrolyte Design

All-solid-state batteries with Li metal anode can address the safety issues surrounding traditional Li-ion batteries as well as the demand for higher energy densities. However, the development of solid electrolytes simultaneously possessing high ionic conductivity and good chemical and electrochemical stabilities has proven to be a challenge. I will present our informatics approach to explore the Li compound space for promising solid electrolytes using high-throughput multi-property screening and interpretable machine learning. This is accomplished through the generation of a large database of battery-related materials properties of Li compounds. We use tree-based ensemble learning methods and graph neural network approaches to accurately learn relationships between crystal structures and corresponding thermodynamic and kinetic properties, with interpretability being a major focus. Our models give us the ability to enable rapid discovery and design of novel solid-state battery chemistries.

Shreyas J Honrao↗
NASA NTRS2010

Future Plans in US Flight Missions: Using Laser Remote Sensing for Climate Science Observations

Laser Remote Sensing provides critical climate science observations necessary to better measure, understand, model and predict the Earth's water, carbon and energy cycles. Laser Remote Sensing applications for studying the Earth and other planets include three dimensional mapping of surface topography, canopy height and density, atmospheric measurement of aerosols and trace gases, plume and cloud profiles, and winds measurements. Beyond the science, data from these missions will produce new data products and applications for a multitude of end users including policy makers and urban planners on local, national and global levels. NASA Missions in formulation including Ice, Cloud, and land Elevation Satellite (ICESat 2) and the Deformation, Ecosystem Structure, and Dynamics of Ice (DESDynI), and future missions such as the Active Sensing of CO2 Emissions over Nights, Days and Seasons (ASCENDS), will incorporate the next generation of LIght Detection And Ranging (lidar) instruments to measure changes in the surface elevation of the ice, quantify ecosystem carbon storage due to biomass and its change, and provide critical data on CO 2 in the atmosphere. Goddard's plans for these instruments and potential uses for the resulting data are described below. For the ICESat 2 mission, GSFC is developing a micro-pulse multi-beam lidar. This instrument will provide improved ice elevation estimates over high slope and very rough areas and result in improved lead detection for sea ice estimates. Data about the sea ice and predictions related to sea levels will continue to help inform urban planners as the changes in the polar ice accelerate. DESDynI is planned to be launched in 2017 and includes both lidar and radar instruments. GSFC is responsible for the lidar portion of the DESDynI mission and is developing a scanning laser altimeter that will measure the Earth's topography, the structure of tree canopies, biomass, and surface roughness. The DESDynI lidar will also measure and predict the response of ice masses to climate change and impact on sea level. Data from the lidar will ultimately be fused with radar data products with heretofore unseen results and applications. The 3-D structure of forests is critical to understanding the impact of land use and associated landscape changes on the habitat of life forms and consequently on their biodiversity. Lidar instruments are also under development to measure trace gases in the atmospheric such as CO2 and methane. GSFC is developing an active measurement approach to determine the CO2 column density and surface pressure for the proposed ASCENDS mission. The objective of this approach is to produce data on the amounts of anthropogenic and organic CO2 in the atmosphere with sufficient accuracy to meet the needs of target users including state, federal and international users as well as policy-related legislative, regulatory, and voluntary carbon-related management groups local to international interests. In summary, NASA will continue to rely on laser remote sensing for critical climate science observations and is committed to the development of the next generation of lidar instruments for a range of applications.

Callahan, Lisa W.↗
NASA NTRS1981

Wetland mapping with imaging radar

An analysis of Seasat radar imagery is presented to identify the radar signature of vegetation-covered water surfaces. Imagery taken on Aug. 21, 1978 displayed anomalously high returns over swamp lands near Lafayette, LA. Landsat scans of the area two days later revealed uniform vegetation cover in the area, and ground examination found the area to be filled with cypress trees in swamps. Similar results were obtained during an overflight above a region of southeast Arkansas. Mechanisms producing the high degree of reflectance are explored, and the possibility that the strong return is due to an interaction of the vegetation cover and the specular water surface underneath is mentioned. Further studies to identify the exact mechanisms producing the anomalous returns are recommended, as well as optimization of the viewing angle for general classes of vegetation density.

Waite, W. P.↗
NASA NTRS1996

Self-Consistent Simulation of the Brownian Stage of Dust Growth

It is a widely accepted view that in proto-planetary accretion disks the collision and following sticking of dust particles embedded in the gas eventually leads to the formation of planetesimals (coagulation). For the smallest dust grains, Brownian motion is assumed to be the dominant source of their relative velocities leading to collisions between these dust grains. As the dust grains grow they eventually couple to the turbulent motion of the gas which then drives the coagulation much more efficiently. Many numerical coagulation simulations have been carried out to calculate the fractal dimension of the aggregates, which determines the duration of the ineffective Brownian stage of growth. Predominantly on-lattice and off-lattice methods were used. However, both methods require simplification of the astrophysical conditions. The aggregates found by those methods had a fractal dimension of approximately 2 which is equivalent to a constant, mass-independent friction time. If this value were valid for the conditions in an accretion disk, this would mean that the coagulation process would finally 'freeze out' and the growth of a planetesimal would be impossible within the lifetime of an accretion disk. In order to investigate whether this fractal dimension is model independent, we simulate self-consistently the Brownian stage of the coagulation by an N-particle code. This method has the advantage that no further assumptions about homogeneity of the dust have to be made. In our model, the dust grains are considered as aggregates built up of spheres. The equation of motion of the dust grains is based on the probability density for the diffusive transport within the gas atmosphere. Because of the very low number density of the dust grains, only 2-body-collisions have to be considered. As the Brownian stage of growth is very inefficient, the system is to be simulated over long periods of time. In order to find close particle pairs of the system which are most likely to undergo a collision, we use a particle-in-cell (PIC) method for the early stages of the simulation where the system is still very homogeneous and a tree method later when the particles are more clustered.

Kempf, S.↗
NASA NTRS1961

A Threshold Theory for Phase-Locked Loops

A model of a phase-locked loop has been developed which is valid for all signal-to-noise ratios. The model is in the form of a nonlinear feedback system with randomly time-varying parameters. The analysis considers two operating regions. In low signal-to-noise ratio regions, the important consideration is stability. We want to study the asymptotic stability in the mean of a nonlinear system. It follows directly that a necessary condition for asymptotic stability of any nonlinear system is that a linearized model about some equilibrium point be asymptotically stable. By considering all possible equilibrium points, we can find an upper bound on the value of noise density which makes the system unstable. This upper bound represents a threshold value for system operation. In high signal-to-noise ratio regions, our results provide an exact statistical. description of system behavior. Therefore, knowledge of the spectrum of the signal and noise may be used to optimize the system configuration.

Van Trees, H. L.↗
DOE OSTI2024

Human limits in machine learning: prediction of potato yield and disease using soil microbiome data

Abstract Background The preservation of soil health is a critical challenge in the 21st century due to its significant impact on agriculture, human health, and biodiversity. We provide one of the first comprehensive investigations into the predictive potential of machine learning models for understanding the connections between soil and biological phenotypes. We investigate an integrative framework performing accurate machine learning-based prediction of plant performance from biological, chemical, and physical properties of the soil via two models: random forest and Bayesian neural network. Results Prediction improves when we add environmental features, such as soil properties and microbial density, along with microbiome data. Different preprocessing strategies show that human decisions significantly impact predictive performance. We show that the naive total sum scaling normalization that is commonly used in microbiome research is one of the optimal strategies to maximize predictive power. Also, we find that accurately defined labels are more important than normalization, taxonomic level, or model characteristics. ML performance is limited when humans can’t classify samples accurately. Lastly, we provide domain scientists via a full model selection decision tree to identify the human choices that optimize model prediction power. Conclusions Our study highlights the importance of incorporating diverse environmental features and careful data preprocessing in enhancing the predictive power of machine learning models for soil and biological phenotype connections. This approach can significantly contribute to advancing agricultural practices and soil health management.

Aghdam, Rosa↗
NASA NTRS1987

Correlation between aircraft MSS and lidar remotely sensed data on a forested wetland

Inland wetland in a portion of the Savannah River swamp forest were mapped with an overall accuracy of 88.5 percent on April 26,l985 using high resolution aircraft Daedalus AADS-1268 MSS data. In addition, data were acquired using a NASA sensor system flown along two flight lines over the Steel Creek Delta. The data were significantly correlated with in situ tree height measurements. The data were registered to the wetland classification map and correlated. Statistical analyses demonstrated that the laser derived canopy height information was significantly associated with the Steel Creek Delta wetland classes encountered along the transect (an F-value of 58.46 at the 0.0001 level of confidence). The relationship between vegetation height and vegetation type was then used to produce a three-dimensional model of the landscape which can be of value when computing biomass or canopy density in this forested wetland environment.

Jensen, John R.↗
NASA NTRS2015

Modeling the Swift BAT Trigger Algorithm with Machine Learning

To draw inferences about gamma-ray burst (GRB) source populations based on Swift observations, it is essential to understand the detection efficiency of the Swift burst alert telescope (BAT). This study considers the problem of modeling the Swift BAT triggering algorithm for long GRBs, a computationally expensive procedure, and models it using machine learning algorithms. A large sample of simulated GRBs from Lien et al. (2014) is used to train various models: random forests, boosted decision trees (with AdaBoost), support vector machines, and artificial neural networks. The best models have accuracies of approximately greater than 97% (approximately less than 3% error), which is a significant improvement on a cut in GRB flux which has an accuracy of 89:6% (10:4% error). These models are then used to measure the detection efficiency of Swift as a function of redshift z, which is used to perform Bayesian parameter estimation on the GRB rate distribution. We find a local GRB rate density of eta(sub 0) approximately 0.48(+0.41/-0.23) Gpc(exp -3) yr(exp -1) with power-law indices of eta(sub 1) approximately 1.7(+0.6/-0.5) and eta(sub 2) approximately -5.9(+5.7/-0.1) for GRBs above and below a break point of z(sub 1) approximately 6.8(+2.8/-3.2). This methodology is able to improve upon earlier studies by more accurately modeling Swift detection and using this for fully Bayesian model fitting. The code used in this is analysis is publicly available online.

gamma rays: general↗
NASA NTRS2016

Modeling the Swift Bat Trigger Algorithm with Machine Learning

To draw inferences about gamma-ray burst (GRB) source populations based on Swift observations, it is essential to understand the detection efficiency of the Swift burst alert telescope (BAT). This study considers the problem of modeling the Swift / BAT triggering algorithm for long GRBs, a computationally expensive procedure, and models it using machine learning algorithms. A large sample of simulated GRBs from Lien et al. is used to train various models: random forests, boosted decision trees (with AdaBoost), support vector machines, and artificial neural networks. The best models have accuracies of greater than or equal to 97 percent (less than or equal to 3 percent error), which is a significant improvement on a cut in GRB flux, which has an accuracy of 89.6 percent (10.4 percent error). These models are then used to measure the detection efficiency of Swift as a function of redshift z, which is used to perform Bayesian parameter estimation on the GRB rate distribution. We find a local GRB rate density of n (sub 0) approaching 0.48 (sup plus 0.41) (sub minus 0.23) per cubic gigaparsecs per year with power-law indices of n (sub 1) approaching 1.7 (sup plus 0.6) (sub minus 0.5) and n (sub 2) approaching minus 5.9 (sup plus 5.7) (sub minus 0.1) for GRBs above and below a break point of z (redshift) (sub 1) approaching 6.8 (sup plus 2.8) (sub minus 3.2). This methodology is able to improve upon earlier studies by more accurately modeling Swift detection and using this for fully Bayesian model fitting.

gamma-ray burst: general – gamma-rays: general â↗
NASA NTRS1988

Bayes classification of terrain cover using normalized polarimetric data

The normalized polarimetric classifier (NPC) which uses only the relative magnitudes and phases of the polarimetric data is proposed for discrimination of terrain elements. The probability density functions (PDFs) of polarimetric data are assumed to have a complex Gaussian distribution, and the marginal PDF of the normalized polarimetric data is derived by adopting the Euclidean norm as the normalization function. The general form of the distance measure for the NPC is also obtained. It is demonstrated that for polarimetric data with an arbitrary PDF, the distance measure of NPC will be independent of the normalization function selected even when the classifier is mistrained. A complex Gaussian distribution is assumed for the polarimetric data consisting of grass and tree regions. The probability of error for the NPC is compared with those of several other single-feature classifiers. The classification error of NPCs is shown to be independent of the normalization function.

Yueh, H. A.↗
NASA NTRS1992

Recognition and characterization of hierarchical interstellar structure. II - Structure tree statistics

A new method of image analysis is described, in which images partitioned into 'clouds' are represented by simplified skeleton images, called structure trees, that preserve the spatial relations of the component clouds while disregarding information concerning their sizes and shapes. The method can be used to discriminate between images of projected hierarchical (multiply nested) and random three-dimensional simulated collections of clouds constructed on the basis of observed interstellar properties, and even intermediate systems formed by combining random and hierarchical simulations. For a given structure type, the method can distinguish between different subclasses of models with different parameters and reliably estimate their hierarchical parameters: average number of children per parent, scale reduction factor per level of hierarchy, density contrast, and number of resolved levels. An application to a column density image of the Taurus complex constructed from IRAS data is given. Moderately strong evidence for a hierarchical structural component is found, and parameters of the hierarchy, as well as the average volume filling factor and mass efficiency of fragmentation per level of hierarchy, are estimated. The existence of nested structure contradicts models in which large molecular clouds are supposed to fragment, in a single stage, into roughly stellar-mass cores.

Houlahan, Padraig↗
NASA NTRS2018

Vegetation Change Detection in Southern California Solar Energy Developments

Change detection from satellite sensor vegetation indices (VIs) presents an opportunity to monitor trends and disturbances at the regional scale for southern California's Mojave and Lower Colorado Deserts. Renewable energy sites are being constructed in this region on public lands under the Bureau of Land Management (BLM). We have developed a framework for VI change detection over the past two decades, with initial focus on three sites, Joshua Tree National Park, Mojave National Preserve, and a proximal group of Development Focus Areas (DFAs), for comparison between protected and development-targeted lands. Three Terra MODIS VIs (normalized difference [NDVI], enhanced [EVI], soil-adjusted [SAVI]) were evaluated in the Breaks for Additive Season and Trend (BFAST) setting for the regional MODIS 250-m resolution grid to estimate significant time series shifts (breakpoints) from February 2000 to May 2018. All three VIs tended to detect the maximum number of breakpoints at a grid location, but cross-correlations with precipitation and comparison with timing of wildfire burns near the study sites for breakpoint density (proportion of area with a breakpoint) showed that NDVI had the strongest response to these major disturbances, supporting its use for subsequent analysis. Time series of NDVI breakpoint change densities for individual solar energy sites did not have a consistent vegetation response following construction. Bootstrapping showed that the DFAs had significantly larger kurtosis and variance in the positive NDVI breakpoint distribution than did the protected sites, but there was no significant difference in the negative distribution for all three sites. The inconsistent post-construction NDVI signal and the large number of breakpoints overall suggested that the largest changes in vegetation cover density were tied to seasonal precipitation amounts. The distributional results indicated that existing site-specific conditions were the main control on VI responses, given the history of human disturbances in the DFAs. Although the results do not support persistent VI disturbances resulting from recent solar energy development, continued monitoring and examination of other ecological variables and surface temperatures will be vital to the long-term protection of this desert environment.

Potter, Christopher S.↗
DOE OSTI2026

Island influences on plant functional traits and trait–trait associations across species‐ and community‐scales

The island rule predicts gigantism or dwarfism in body size of island species relative to their mainland counterparts. However, whether other functional traits shift and whether trait–trait associations on islands differ between species and community levels remains unclear. We measured 13 carbon- and water-related functional traits in 37 shared tree species across 35 eastern Chinese islands and 66 nearby mainland plots. We examined species-level trait value shifts and associations under the island rule and compared trait associations between species and communities. Most size-related, wood-anatomical, and hydraulic traits shifted on islands, with large values decreasing and small values increasing; yet, their associations remained stable, aligning with the global trait spectrum and trait–trait coevolution. This stability, despite trait value shifts, suggests evolutionary integration of functional strategies. By contrast, island community-scale trait associations diverged from shared species-level patterns and sometimes reversed, such as positive relationships between wood density and resource-acquisitive traits. Community-level trait associations were stronger on islands, likely reflecting constrained environmental filtering and migration limitation. These contrasting patterns suggest that dominant species can restructure trait associations at the community level, with implications for ecosystem functioning and carbon storage, thereby advancing understanding of plant trait strategies in island systems.

Archipelagos↗
NASA NTRS2015

Advanced Intensity-Modulation Continuous-Wave Lidar Techniques for ASCENDS O2 Column Measurements

Global atmospheric carbon dioxide (CO2) measurements for the NASA Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) space mission are critical for improving our understanding of global CO2 sources and sinks. Advanced Intensity- Modulated Continuous-Wave (IM-CW) lidar techniques are investigated as a means of facilitating CO2 measurements from space to meet the ASCENDS measurement requirements. In recent numerical, laboratory and flight experiments we have successfully used the Binary Phase Shift Keying (BPSK) modulation technique to uniquely discriminate surface lidar returns from intermediate aerosol and cloud contamination. We demonstrate the utility of BPSK to eliminate sidelobes in the range profile as a means of making Integrated Path Differential Absorption (IPDA) column CO2 measurements in the presence of optically thin clouds, thereby eliminating the need to correct for sidelobe bias errors caused by the clouds. Furthermore, high accuracy and precision ranging to the surface as well as to the top of intermediate cloud layers, which is a requirement for the inversion of column CO2 number density measurements to column CO2 mixing ratios, has been demonstrated using new hyperfine interpolation techniques that takes advantage of the periodicity of the modulation waveforms. This approach works well for both BPSK and linear swept-frequency modulation techniques. The BPSK technique under investigation has excellent auto-correlation properties while possessing a finite bandwidth. A comparison of BPSK and linear swept-frequency is also discussed in this paper. These results are extended to include Richardson-Lucy deconvolution techniques to extend the resolution of the lidar beyond that implied by limit of the bandwidth of the modulation, where it is shown useful for making tree canopy measurements.

Campbell, Joel F.↗
DOE OSTI2024

Water use of co‐occurring loblolly ( Pinus taeda ) and shortleaf ( Pinus echinata ) in a loblolly pine plantation in the Piedmont

Abstract Measuring water use in co‐occurring loblolly pine (Pinus taedaL.) and shortleaf pine (Pinus echinataMill.) enhances our understanding of their competitive water use and aids in refining watershed water budget model parameters. This study was conducted in a 12‐ha forested headwater catchment in the Piedmont of North Carolina, southeastern U.S., from 2018 to 2019 (pre‐thinning) to 2020 (post‐thinning). Sap flux density (J s ), species‐level transpiration (T s ), and watershed‐level transpiration (T w ) were quantified. Water use efficiency (WUE) in loblolly and shortleaf pines was compared, alongside an investigation into how both species'J s andT s responded to atmospheric vapor pressure deficit (VPD). Loblolly pine had 19%–36% higherJ s than shortleaf pine. DailyT s for loblolly pine ranged from 15.0 to 29.0 L/day whileT s in shortleaf pine ranged from 3.0 to 6.8 L/day. TheT s was significantly higher in loblolly pine when compared to shortleaf pine likely due to higher canopy position and higher growth rates of the former. WUE, defined by annual tree biomass growth per tree water use, was not significantly different between the two. DailyJ s andT s in both species responded nonlinearly to VPD, with loblolly pine being more sensitive and variable. Species‐specific water use should be considered when quantifyingT w and developing reliable models to predict the effects of forest management practices on water resources.

Engineering↗
DOE OSTI2024

Elemental profiling and genome-wide association studies reveal genomic variants modulating ionomic composition in Populus trichocarpa leaves

The ionome represents elemental composition in plant tissues and can be an indicator of nutrient status as well as overall plant performance. Thus, identifying genetic determinants governing elemental uptake and storage is an important goal for breeding and engineering biomass feedstocks with improved performance. In this study, we coupled high-throughput ionome characterization of leaf tissues with high-resolution genome-wide association studies (GWAS) to uncover genetic loci that modulate ionomic composition in leaves of poplar ( Populus trichocarpa ). Significant agreement was observed across the three ionomic profiling platforms tested: inductively coupled plasma-mass spectrometry (ICP-MS), neutron activation analysis (NAA) and laser-induced breakdown spectroscopy (LIBS). Relative quantification of 20 elements using ICP-MS across a population of 584 genotypes, revealed larger variation in micro-nutrients and trace elements content than for macro-nutrients across genotypes. The GWAS performed using a set of high-density (>8.2 million) single nucleotide polymorphisms, identified over 600 loci significantly associated with variations in these mineral elements, pointing to numerous uncharacterized candidate genes. A significant enrichment for genes related to ion homeostasis and transport was observed, including several members of the cation-proton antiporters (CPA) family and MATE efflux transporters, previously reported to be critical for plant growth and fitness in other species. Our results also included a polymorphic copy of the high-affinity molybdenum transporter MOT1 found directly associated to molybdenum content. For the first time in a perennial plant, our results provide evidence of genetic control of mineral content in a model tree species.

59 BASIC BIOLOGICAL SCIENCES↗