Search NASA⌕ Search

SEARCH · Search NASA

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A Stable Vanadium Redox-Flow Battery with High Energy Density for Large-scale Energy Storage

Low cost, high performance redox flow batteries are highly demanded for up to multi-megawatt levels of renewable and grid energy storage. Here, we report a new vanadium redox flow battery with a significant improvement over the current technologies. This new battery utilizes a sulfate-chloride mixed solution, which is capable of dissolving more than 2.5 M vanadium or about a 70% increase in the energy storage capacity over the current vanadium sulfate system. More importantly, the new electrolyte remains stable over a wide temperature range of -5 to 60oC, potentially eliminating the need of active heat management. Its high energy density, broad operational temperature window, and excellent electrochemical performance would lead to a significant reduction in the cost of energy storage, thus accelerating its market penetration.

energy storage↗

Nanoporous Polytetrafluoroethylene/Silica Composite Separator as a High-Performance All-Vanadium Redox Flow Battery Membrane

Driven by the motivation of searching for low-cost membrane alternatives, a novel nanoporous polytetrafluoroethylene/silica composite separator has been prepared and evaluated for its use in all-vanadium mixed-acid redox flow battery. This separator consisting of silica particles enmeshed in a polytetrafluoroethylene fibril matrix has no ion exchange capacity and is featured with unique nanoporous structures, which function as the ion transport channels in redox flow battery operation, with an average pore size of 38nm and a porosity of 48%. This separator has produced excellent electrochemical performance in the all-vanadium mixed-acid system with energy efficiency delivery comparable to Nafion membrane and superior rate capability and temperature tolerance. The separator also demonstrates an exceptional capacity retention capability over extended cycling, offering additional operational latitude towards conveniently mitigating the capacity decay that is inevitable for Nafion. Because of the inexpensive raw materials and simple preparation protocol, the separator is particularly low-cost, estimated to be at least an order of magnitude more inexpensive than Nafion. Plus the proven chemical stability due to the same backbone material as Nafion, this separator possesses a good combination of critical membrane requirements and shows great potential to promote market penetration of the all-vanadium redox flow battery by enabling significant reduction of capital and cycle costs.

all-vanadium redox flow battery↗

Vanadium and Nickel Distribution in Resin Fractions of High-Sulfur Heavy Oils

The mechanisms of occurrence and distribution of vanadium and nickel in resins and their fractions are studied with reference to high-sulfur heavy oils of Tatarstan, Samara Oblast (region), and Kazakhstan deposits. For all the investigated heavy oils, the content of vanadium and nickel in resins increase in direct proportion to the increase in contents of these metals in the oils. The resins were fractionated into benzene and alcohol-benzene fractions by adsorption chromatographic separation on silica gel. The alcohol-benzene fractions are characterized as being more polar on account of a larger content of oxygen-bearing structural groups. The special features of vanadium and nickel content and distribution in resin fractions are disclosed for heavy oils of various production complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-Temperature Magnetic Properties of Vanadium-Doped ZnO Nanoparticles

Low-temperature magnetic study of transition metal-doped ZnO nanoparticles tends to spring ambiguities of magnetic phases due to defect states, environment of doped ions, and anisotropy. Interestingly, vanadium doping in ZnO brings out versatile magnetic ordering which offers more room for basic understanding of the underlying mechanism. Vanadium-doped ZnO nanoparticles are prepared using a simple cost-effective approach of solution combustion method. Macroscopic and microscopic aspects of the samples have been unraveled using structural and morphological studies with the implications on the exhibited magnetic behavior. Development of antiferromagnetic, ferromagnetic, and ferrimagnetic interactions in the material illustrated by low-temperature magnetic measurements preludes the possible interplay of dopant-initiated defect correlation and morphological and interfacial secondary phases. The grain boundary reformation due to vanadium in the ZnO nanograins is exploited through a systematic correlation of structural and morphological studies in order to gain more insight into the portrayed magnetic signatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Arsenic, vanadium, iron, and manganese biogeochemistry in a deltaic wetland, southern Louisiana, USA

Geochemical cycling of the redox-sensitive trace elements arsenic (As) and vanadium (V) was examined in shallow pore waters from a marsh in an interdistributary embayment of the lower Mississippi River Delta. In particular, we explore how redox changes with depth and distance from the Mississippi River affect As and V cycling in the marsh pore waters. Previous geophysical surveys and radon mass balance calculations suggested that Myrtle Grove Canal and bordering marsh receive fresh groundwater, derived in large part from seepage of the Mississippi River, which subsequently mixes with brackish waters of Barataria Bay. In addition, the redox geochemistry of pore waters in the wetlands is affected by Fe and S cycling in the shallow subsurface (0-20 cm). Sediments with high organic matter content undergo SO 4 2- reduction, a process ubiquitous in the shallow subsurface but largely absent at greater depths (~3 m). Instead, at depth, in the absence of organic-rich sediments, Fe concentrations are elevated, suggesting that reduction of Fe(III) oxides/oxyhydroxides buffers redox conditions. Arsenic and V cycling in the shallow subsurface are decoupled from their behavior at depth, where both V and As appear to be removed from solution by either diffusion or adsorption onto, or co-precipitation with, authigenic minerals within the deeper aquifer sediments. Pore water As concentrations are greatest in the shallow subsurface (e.g., up to 315 nmol kg -1 in the top ~20 cm of the sediment) but decrease with depth, reaching values <30 nmol kg -1 at depths between 3 and 4 m. Vanadium concentrations appear to be tightly coupled to Fe cycling in the shallow subsurface, but at depth, V may be adsorbed to clay or sedimentary organic matter (SOM). Diffusive fluxes are calculated to examine the export of trace elements from the shallow marsh pore waters to the overlying canal water that floods the marsh. The computed fluxes suggest that the shallow sediment serves as a source of Fe, Mn, and As to the surface waters, whereas the sediments act as a sink for V. Iron and Mn fluxes are substantial, ranging from 50 to 30,000 and 770 to 4,300 nmol cm -2 day -1 , respectively, whereas As fluxes are much less, ranging from 2.1 to 17 nmol cm -2 day -1 . Vanadium fluxes range from 3.0 nmol cm -2 day -1 directed into the sediment to 1.7 nmol cm -2 day -1 directed out of the sediment

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bonding of vanadium- and Iron-based alloys as interlayers for plasma-facing and structural materials in fusion systems

Vanadium alloys and FeCrAl were investigated as interlayers between tungsten and reduced activation ferritic martensitic steel for fusion system components to avoid formation of intermetallic phase at operating temperatures between 550 and 1100 °C, while maintaining a body centered cubic phase throughout the interface. Physical and mechanical properties need to be graded between tungsten and steel, but recent results showed a significant hardness increase at the FeCrAl to vanadium alloy interface. Here, a sintered sample of these alloys was annealed for extended time, and the microstructure was investigated to provide a better understanding of the phenomena. A comparison with an additively manufactured interface of the same material is provided. An unexpected L2 1 intermetallic phase formation has been revealed using microscopy and synchrotron techniques and will inform future additive manufacturing approaches of the interface. A Cr layer interface as a preliminary solution was proposed between the Vanadium alloy and FeCrAl alloy interface.

Additive manufacturing↗

Sol-gel derived PZT films doped with vanadium pentoxide

The present research investigated the sol-gel preparation, dielectric and ferroelectric properties of PZT films doped with 5 mol% vanadium oxide. Stable PZTV sols can be readily formed, and homogeneous, micrometer thick and pinhole-free PZTV films were obtained by using spin coating followed with rapid annealing. The X-ray diffraction patterns revealed that no parasitic or secondary phases were formed in the sol-gel PZT films with the addition of vanadium oxide. The material doped with vanadium pentoxide showed enhanced dielectric constant and remanent polarization with reduced loss tangent and coercive field.

36 MATERIALS SCIENCE↗

Tungsten-doped vanadium dioxide thin film based tunable antenna

Highlights: • VO{sub 2} and W-doped VO{sub 2} thin films were successfully synthesized by reactive PLD process. • By using the films, thermally tunable and switchable bowtie RF antenna structures were designed, fabricated, and tested. • The thin film based RF antenna structures were fully functional with a successful frequency tuning capability. - Abstract: Since vanadium dioxide (VO{sub 2}) is a phase change material that shows a metal to insulator transition behavior at a temperature near 68℃, it has many potential applications in the areas of science and engineering. In this study, tungsten (W) -doped VO{sub 2} thin films were synthesized by pulsed laser deposition (PLD) technique with a metallic vanadium target and W-wires which were simply attached on the surface of the vanadium target. Also, bowtie RF antenna structures were fabricated by using the films to check the frequency tunability. The experimental results show a decrease of the transition temperature and a broadening of the phase transition as the atomic percentage of W increases in the film structure. The results also reveal that the W-doped VO{sub 2} thin film based RF antenna was fully functional with the successful frequency tuning capability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and chemical evolutions of a magnesium vanadium oxide cathode under electrochemical cycling in magnesium batteries

The design of cathode materials that remain chemically and structurally stable during repetitive ion insertion and extraction poses a significant challenge in developing multivalent batteries. The cycling stability of traditional metal oxide-based cathode is challenged by sluggish diffusion of multivalent cations and parasitic reactivity at interfacial regimes, including the cathode electrolyte interphase layer (CEI). Understanding the reactions at the cathode-electrolyte interface, particularly those induced by non-stoichiometric surface layers, is a crucial design parameter for both cathode materials and electrolytes. Here, in this study, we employed multimodal analysis, including in situ and ex situ X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS) to examine the surface reactions and subsequent structural and chemical evolutions of the CEI on high voltage magnesium vanadium oxide (MgV 2 O 4 ) spinel cathode during the Mg 2+ insertion/extraction processes. The results revealed that the presence of non-stoichiometric surface layers in the magnesium vanadium oxide cathode drive the decomposition of bis(trifluoromethanesulfonyl)imide (TFSI - ) anion, leading to the formation of the CEI layer. The CEI layer could inhibit the Mg 2+ ion transfer processes. Accompanying this reactivity-driven degradation, the magnesium vanadium oxide cathode undergoes pulverization, forming clusters of nanosized particles. This process likely improves cycling ability by creating new intercalation sites and shortening the diffusion pathway for the Mg 2+ cations. This study demonstrates that controlling surface stoichiometry and engineering morphological properties are critical design parameters for high performance cathodes for multivalent batteries.

25 ENERGY STORAGE↗

Low temperature hydrogen superpermeation in vanadium composite metal foil pumps

Palladium-based foil membranes are an effective option for hydrogen isotope recovery from the plasma exhaust of future fusion plants, but cost and availability are concerns. Vanadium (V) is a relatively low cost, neutron tolerant material with high hydrogen permeability. It has been well-studied as a superpermeable membrane at high temperature (>500 °C), but V displays negligible superpermeation at low temperature (75–200 °C) due to catalytic limitations. Composite membranes were fabricated by depositing thin layers (~100 nm) of either Pd or BCC PdCu on sputter-cleaned vanadium foils (100 μm). Symmetric membranes elevated superpermeation to levels approaching bulk Pd or PdCu foils, with ~5X higher flux in the latter reflecting the superior properties of PdCu. Asymmetric membranes revealed that the Pd-based catalyst layer was critical for both efficient absorption of superthermal hydrogen upstream as well as catalyzing re-combinative desorption downstream. At T ≥ 150 °C composite membrane superpermeation was equivalent to the Pd-based foils, but the flux was attenuated by a factor of 2-3X as the temperature was reduced. This deviation from pure foil performance coincided with the formation of vanadium hydride (β-V 2 H), which also impacted the transient response. Nevertheless, no embrittlement was observed under the conditions examined and elevating the temperature >150 °C removed the hydride and restored full performance. The achievement of palladium-level performance with a >99% reduction in Pd inventory makes these V composite metal foils pumps an attractive option for low temperature hydrogen isotope recovery in future fusion plants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure-property relationships in NO x sensor materials composed of arrays of vanadium oxide nanoclusters

Here, the mixed-valent vanadium oxide based three-dimensional framework structure species [Cd 3 (H 2 O) 12 V 16 IV V 2 V O 36 (OH) 6 (AO 4 )]∙24H 2 O, (A=V,S) (Cd 3 (VO) o ) represents a rare example of an interesting sensor material which exhibits NO x {NO+NO 2 } semiconducting gas sensor properties under ambient conditions. The electrical resistance of the sensor material Cd 3 (VO) o decreases in air. Combined characterization studies revealed that the building block, {V 18 O 42 (AO 4 )} cluster, of 3-D framework undergoes oxidation and remains intact for at least 2 months. The decrease in resistance is attributable to the reactivity of molecular oxygen towards vanadium which results in an increase in the oxidation state as well as the coordination number of vanadium center and decrease in band gap of Cd 3 (VO) o . Based on these results we propose that the changes in semiconducting properties of Cd 3 (VO) o under ambient conditions are due to the greater overlap between the O 2p and V 3d orbitals occurring during the oxidation.

36 MATERIALS SCIENCE↗

Simultaneous recovery of vanadium and nickel from power plant fly-ash: Optimization of parameters using response surface methodology

Highlights: • Leaching of vanadium and nickel from fly ash (14.43% V and 5.19% Ni) in sulfuric acid was performed. • Optimization of leaching parameters was carried out using a response surface methodology. • Using optimum conditions, 94.28% V and 81.01% Ni “actual recovery” was obtained. - Abstract: Simultaneous recovery of vanadium (V) and nickel (Ni), which are classified as two of the most hazardous metal species from power plant heavy fuel fly-ash, was studied using a hydrometallurgical process consisting of acid leaching using sulfuric acid. Leaching parameters were investigated and optimized in order to maximize the recovery of both vanadium and nickel. The independent leaching parameters investigated were liquid to solid ratio (S/L) (5–12.5 wt.%), temperature (45–80 °C), sulfuric acid concentration (5–25 v/v%) and leaching time (1–5 h). Response surface methodology (RSM) was used to optimize the process parameters. The most effective parameter on the recovery of both elements was found to be temperature and the least effective was time for V and acid concentration for Ni. Based on the results, optimum condition for metals recovery (actual recovery of ca.94% for V and 81% for Ni) was determined to be solid to liquid ratio of 9.15 wt.%, temperature of 80 °C, sulfuric acid concentration of 19.47 v/v% and leaching time of 2 h. The maximum V and Ni predicted recovery of 91.34% and 80.26% was achieved.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental and Theoretical Insights into the Potential of V 2 O 3 Surface Coatings for Hydrogen Permeable Vanadium Membranes

A grand challenge of vanadium-based H 2 permeable membranes is the development of effective, cheap, and stable catalysts to facilitate H 2 dissociation and recombination. This article investigates a facile air treatment to form catalytically active vanadium oxide on the surfaces of dense vanadium foils. The treatment consisted of short air exposure followed by H 2 reduction at 823 K, which produced a well-faceted and nanocrystalline V 2 O 3 layer on the foil surfaces. The resulting membranes display stable H 2 permeability of 2 ± 0.25 × 10 -8 mol·m -1 ·s -1 ·Pa -0.5 , but transient declines in permeation are observed when operated at both elevated and reduced temperatures. DFT calculations revealed that V 2 O 3 (0001) surfaces display barriers and adsorption energies for H 2 dissociation/recombination that are comparable to known H 2 activation catalysts. It was found that H 2 dissociation is expected to proceed spontaneously on metal-terminated V 2 O 3 , with recombinative-desorption anticipated as the rate limiting step.

08 HYDROGEN↗

Coupled Experimental–Theoretical Characterization of a Carbon Electrode in Vanadium Redox Flow Batteries using X-ray Absorption Spectroscopy

Vanadium redox flow batteries (VRFBs) have emerged as promising solutions for stationary grid energy storage due to their high efficiency, scalability, safety, near room-temperature operation conditions, and the ability to independently size power and energy capacities. The performance of VRFBs heavily relies on the redox couple reactions of V 2+ /V 3+ and VO 2+ /VO 2 + on carbon electrodes. Therefore, a thorough understanding of the surface functionality of carbon electrodes and their propensity for degradation during electrochemical cycles is crucial for designing VRFBs with extended lifespans. In this study, we present a coupled experimental–theoretical approach based on carbon K edge X-ray absorption spectroscopy (XAS) to characterize carbon electrodes prepared under different conditions and identify relevant functional groups that contribute to unique spectroscopic features. Atomic models were created to represent functional groups, such as hydroxyl, carboxyl, methyl, and aldehyde, bonded to carbon atoms in either sp 2 or sp 3 environments. The interactions between functionalized carbon and various solvated vanadium complexes were modeled using density functional theory. A library of carbon K-edge XAS spectra was generated for distinct carbon atoms in different functional groups, both before and after interacting with solvated vanadium complexes. Here we demonstrate how these simulated spectra can be used to deconvolve ex situ experimental spectra measured from carbon electrodes and to track changes in the electrode composition following immersion in different electrolytes or extended cycling within a functional VRFB. By doing so, we identify the active species present on the carbon electrodes, which play a crucial role in determining their electrochemical performance.

25 ENERGY STORAGE↗

Effect of Vanadium Incorporation on Electrochemical Performance of LiFePO(4) for Lithium-Ion Batteries

A series of LiFe{sub 1-x}V{sub x}PO{sub 4}/C samples have been successfully prepared using a two-step solid-state reaction route. The effect of vanadium incorporation on the performance of LiFePO{sub 4} has systematically been investigated with X-ray diffraction, Raman spectroscopy, charge/discharge measurements, and cyclic voltammetry tests. It is found that V incorporation significantly enhances the electrochemical performance of LiFePO{sub 4}. Particularly, the LiFePO{sub 4}/C sample with 5 at. % vanadium doping exhibits the best performance with a specific discharge capacity of 129 mAh g{sup -1} at 5.0 C after 50 cycles; the capacity retention ratio is higher than 97.5% at all C rates from 0.1 to 5.0 C. X-ray absorption spectroscopy results show that the valence of V in LiFe{sub 0.95}V{sub 0.05}PO{sub 4}/C is between +3 and +4. It is confirmed that the samples with x {le} 0.03 are in single phase, whereas the samples with 0.05 {le} x < 1.00 contain two impurity phases: Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} and LiVOPO{sub 4}. A clear feature of vanadium incorporation in LiFePO{sub 4} has been specified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monomeric vanadium oxide on a {theta}-Al{sub 2}O{sub 3} support : a combined experimental/theoretical study.

A combined experimental and theoretical study of vanadium oxide monomers on a {theta}-alumina surface under different environments has identified four different structures. Deep UV Raman results suggest that vanadia is attached predominantly to an aluminum site that was an isolated terminal Al?OH group on the {theta}-alumina surface. The preresonance Raman spectra for vanadium oxide supported on {theta}-alumina with a very low VO{sub x} surface density show three distinct V{double_bond}O bands under dehydrated conditions. The observed frequencies match well with the calculated stretching frequencies from B3LYP density functional theory for tridendate, bidendate, and molecular structures of vanadium oxide monomers on a dehydrated surface. The free energies calculated for these three structures from density functional theory as a function of temperature suggest that all three could exist on the surface with the tridentate structure being the most stable of the three on the dehydrated surface. Different structures and different degrees of vibrational coupling of V?O to V{double_bond}O modes may cause the appearance of three V{double_bond}O bands in the preresonance Raman spectra. On the hydrated surface, the Raman spectra show a V?O band, in agreement with the calculated frequency for a monodentate structure on this surface. Finally, the calculated free energies of hydrated and dehydrated surfaces indicate a transition from a hydrated to a dehydrated {theta}-alumina surface occurs at around 600 K at 10{sup -6} atm pressure of H{sub 2}O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precursor nuclearity effects in supported vanadium oxides prepared by organometallic grafting.

Despite widespread importance in catalysis, the active and selective sites of supported vanadium oxide (VO{sub x}) catalysts are not well understood. Such catalysts are of great current interest because of their industrial significance and potential for selective oxidation processes. However, the fact that the nature of the active and selective sites is ambiguous hinders molecular level understanding of catalytic reactions and the development of new catalysts. Furthermore, complete structural elucidation requires isolation and characterization of specific vanadium oxide surface species, the preparation of which presents a significant synthetic challenge. In this study, we utilize the structural uniformity inherent in organometallic precursors for the preparation of supported vanadium oxide catalysts. The resulting catalysts are characterized by UV-visible diffuse reflectance spectroscopy (UV-vis DRS), X-ray absorption spectroscopy (XAS), UV-Raman spectroscopy, and H{sub 2}-temperature programmed reduction (H{sub 2}-TPR). Significant structural and reactivity differences are observed in catalysts prepared from different organometallic precursors, indicating that the chemical nature of surface vanadia can be influenced by the nuclearity of the precursor used for grafting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Transient Vanadium(III) Neopentylidene Complex. Redox Chemistry and Reactivity of the VCH[superscript t]Bu Functionality

The vanadium(III) bis(neopentyl) complex (PNP)V(CH{sub 2}{sup t}Bu){sub 2} (PNP = N[4-Me-2-(P{sup i}Pr{sub 2})C{sub 6}H{sub 3}]{sub 2}{sup -}), a complex readily prepared from alkylation of (PNP)VCl{sub 2} with 2 equiv of LiCH{sub 2}{sup t}Bu, serves as a precursor to the transient vanadium(III) alkylidene complex '(PNP)V{sub {double_bond}}CH{sup t}Bu'. Two-electron oxidation of the intermediate [(PNP)V{sub {double_bond}}CH{sup t}Bu] with chalcogen sources results in formation of the vanadium(V) chalcogenide series (PNP)V{sub {double_bond}}CH{sup t}Bu(X) (X = O, S, Se, Te). This family of chalcogenide-alkylidenes has been studied via {sup 51}V NMR spectroscopy in combination with DFT computational methods. The redox chemistry of [(PNP)V{sub {double_bond}}CH{sup t}Bu] and the reactivity of the alkylidene ligand are explored with the substrates N{sub 3}SiMe{sub 3}, N{sub {open_square}}C{sup t}Bu, N{sub 2}, and azobenzene. It was discovered that N{sub {double_bond}}N cleavage of the last substrate can be achieved without oxidation of the metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗