Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Effect of a crystal-melt interface on Taylor-vortex flow

The linear stability of circular Couette flow between concentric infinite cylinders is considered for the case that the stationary outer cylinder is a crystal-melt interface rather than a rigid surface. A radial temperature difference is maintained across the liquid gap, and equations for heat transport in the crystal and melt phases are included to extend the ordinary formulation of this problem. The stability of this two-phase system depends on the Prandtl number. For small Prandtl number the linear stability of the two-phase system is given by the classical results for a rigid-walled system. For increasing values of the Prandtl number, convective heat transport becomes significant and the system becomes increasingly less stable. Previous results in a narrow-gap approximation are extended to the case of a finite gap, and both axisymmetric and nonaxisymmetric disturbance modes are considered. The two-phase system becomes less stable as the finite gap tends to the narrow-gap limit. The two-phase system is more stable to nonaxisymmetric modes with azimuthal wavenumber n = 1; the stability of these n = 1 modes is sensitive to the latent heat of fusion.

Mcfadden, G. B.↗

Computation and visualization of leading edge vortex flows

The modeling of vortical flows is a continuing requirement for the design and analysis of flight vehicles. In this paper, the computation of leading edge vortices is considered. The solution of the laminar, thin-layer Navier-Stokes equations for a transonic delta wing is presented as a representative example. Issues relating to the visualization of the results are discussed, and illustrations using the newly developed software VISUAL3 on a Stardent graphics supercomputer are included.

Murman, E. M.↗

Measurement of vortex flow fields

A 3-D laser fluorescence anemometer (LFA) was designed, built, and demonstrated for use in the Langley 16 x 24 inch Water Tunnel. Innovative optical design flexibility combined with compact and portable data acquisition and control systems were incorporated into the instrument. This will allow its use by NASA in other test facilities. A versatile fiber optic system facilities normal and off-axis laser beam alignment, removes mirror losses and improves laser safety. This added optical flexibility will also enable simple adaptation for use in the adjacent jet facility. New proprietary concepts in transmitting color separation, light collection, and novel prism separation of the scattered light was also designed and built into the system. Off-axis beam traverse and alignment complexity led to the requirement for a specialized, programmable transverse controller, and the inclusion of an additional traverse for the off-axis arm. To meet this challenge, an 'in-house' prototype unit was designed and built and traverse control software developed specifically for the water tunnel traverse applications. A specialized data acquisition interface was also required. This was designed and built for the LFA system.

Mcdevitt, T. Kevin↗

Forebody vortex flow control on the F-16C using tangential slot and jet nozzle blowing

The present experimental investigation of the effects of tangential slot and nozzle forebody blowing on the aerodynamic and stability characteristics of the F-16C configuration, for up-to-55 deg alpha and up-to-20 deg sideslip, was conducted on a 1/15th-scale model at freestream Mach = 0.4 and Re of 2.5 million/ft, for one tangential slot-nozzle location and two chordwise jet nozzle locations. Both the slot and the jet nozzles generated large yawing moments at very low blowing rates, over a wide range of alpha and sideslip angles. The centers of pressure of the side forces which generated the yawing moments due to slot and nozzle blowing were located in the region of the leading-edge extensions (LEXs); the moments may accordingly be due to the manipulation of the combined forebody and LEX flowfields.

Lemay, Scott P.↗

Calculations of separated vortex flows at low speed for low-aspect-ratio wings

An implicit finite-difference scheme has been developed for solving three-dimensional incompressible Navier-Stokes equations. Computations for complicated vortical flows past several sharp- and round-edged delta and double-delta wings at high angles of attack and sideslip are discussed. Computed results demonstrate the effectiveness of the present method and show good agreement with experimental data.

Liu, C. H.↗

Investigation of Semivaneless Turbine Stator Designed to Produce Axially Symmetrical Free-vortex Flow

A semivaneless turbine stator designed to eliminate blade wakes and secondary-flow accumulations of boundary-layer air was built and tested. Performance of this stator was evaluated with static pressures measured in the vaneless section and surveys of total pressure and flow angle made at the stator exit. Results are presented in terms of theoretical and experimental velocities and flow angles, boundary-layer parameters, and contours of total-pressure loss across the stator.

TURBINES - MIXED-FLOW↗

An Assessment of CFD Effectiveness for Vortex Flow Simulation to Meet Preliminary Design Needs

The low-speed flight and transonic maneuvering characteristics of combat air vehicles designed for efficient supersonic flight are significantly affected by the presence of free vortices. At moderate-to-high angles of attack, the flow invariably separates from the leading edges of the swept slender wings, as well as from the forebodies of the air vehicles, and rolls up to form free vortices. The design of military vehicles is heavily driven by the need to simultaneously improve performance and affordability.1 In order to meet this need, increasing emphasis is being placed on using Modeling & Simulation environments employing the Integrated Product & Process Development (IPPD) concept. The primary focus is on expeditiously providing design teams with high-fidelity data needed to make more informed decisions in the preliminary design stage. Extensive aerodynamic data are needed to support combat air vehicle design. Force and moment data are used to evaluate performance and handling qualities; surface pressures provide inputs for structural design; and flow-field data facilitate system integration. Continuing advances in computational fluid dynamics (CFD) provide an attractive means of generating the desired data in a manner that is responsive to the needs of the preliminary design efforts. The responsiveness is readily characterized as timely delivery of quality data at low cost.

Raj, P.↗

A Discrete-Vortex Method for Studying the Wing Rock of Delta Wings

A discrete-vortex method is developed to investigate the wing rock problem associated with highly swept wings. The method uses two logarithmic vortices placed above the wing to represent the vortex flow field and uses boundary conditions based on conical flow, vortex rate of change of momentum, and other considerations to position the vortices and determine their strengths. A relationship based on the time analogy and conical-flow assumptions is used to determine the hysteretic positions of the vortices during roll oscillations. Static and dynamic vortex positions and wing rock amplitudes and frequencies calculated by using the method are generally in good agreement with available experimental data. The results verify that wing rock is caused by hysteretic deflections of the vortices and indicate that the stabilizing moments that limit wing rock amplitudes are the result of the one primary vortex moving outboard of the wing where it has little influence on the wing.

Gainer, Thomas G.↗

Prediction of vortex lift on interacting delta wings in incompressible flow

Vortex flow modeling is used to calculate the steady inviscid incompressible flow past one, two and three delta wing configurations. The wings are modeled with vortex lattices and the leading and trailing-edge sheets are modeled by segmented straight vortex filaments. Aerodynamic characteristics are obtained for a range of geometry and angle of attack.

Dodbele, S. S.↗

Observation of airplane flow fields by natural condensation effects

In-flight condensation patterns can illustrate a variety of airplane flow fields, such as attached and separated flows, vortex flows, and expansion and shock waves. These patterns are a unique source of flow visualization that has not been utilized previously. Condensation patterns at full-scale Reynolds number can provide useful information for researchers experimenting in subscale tunnels. It is also shown that computed values of relative humidity in the local flow field provide an inexpensive way to analyze the qualitative features of the condensation pattern, although a more complete theoretical modeling is necessary to obtain details of the condensation process. Furthermore, the analysis revealed that relative humidity is more sensitive to changes in local static temperature than to changes in pressure.

Campbell, James F.↗