Search NASA⌕ Search

SEARCH · Search NASA

Results for “wood development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Free-Piston Stirling Power Conversion Unit for Fission Power System, Phase II Final Report

In Phase II, the manufacture and testing of two 6-kW(sub e)Stirling engines was completed. The engines were delivered in an opposed 12-kW(sub e) arrangement with a common expansion space heater head. As described in the Phase I report, the engines were designed to be sealed both hermetically and with a bolted O-ring seal. The completed Phase II convertor is in the bolted configuration to allow future disassembly. By the end of Phase II, the convertor had passed all of the final testing requirements in preparation for delivery to the NASA Glenn Research Center. The electronic controller also was fabricated and tested during Phase II. The controller sets both piston amplitudes and maintains the phasing between them. It also sets the operating frequency of the machine. Details of the controller are described in the Phase I final report. Fabrication of the direct-current to direct-current (DC-DC) output stage, which would have stepped down the main controller output voltage from ~700 to 120 V(sub DC), was omitted from this phase of the project for budgetary reasons. However, the main controller was successfully built, tested with the engines, and delivered. We experienced very few development issues with this high-power controller. The project extended significantly longer than originally planned because of yearly funding delays. The team also experienced several hardware difficulties along the development path. Most of these were related to the different thermal expansions of adjacent parts constructed of different materials. This issue was made worse by the large size of the machine. Thermal expansion problems also caused difficulties in the brazing of the opposed stainless steel sodium-potassium (NaK) heater head. Despite repeated attempts Sunpower was not able to successfully braze the opposed head under this project. Near the end of the project, Glenn fabricated an opposed Inconel NaK head, which was installed prior to delivery for testing at Glenn. Engine development prior to this was performed using both single- and dual-opposed (common expansion space) Inconel heads with clamp-on electric heaters.

Free-piston Stirling Power Conversion Unit↗
NASA NTRSDate not supplied

Extending the Life of NASA’s Tracking and Data Relay Satellite (TDRS)-8: TDRS-8 Power Challenges And Planning for End of Mission

The United States National Aeronautics and Space Administration (NASA) Near Space Network’s Space Relay (SR) System provides communication relay services to a number of scientific and manned space missions with its Tracking and Data Relay Satellite (TDRS) constellation. NASA’s eighth Tracking and Data Relay Satellite (TDRS) has been experiencing a decline in the health of its power subsystem, and recent reliability analyses indicate that the end of its mission serving the Space Relay is imminent. Launched in 2000, TDRS-8 is the oldest TDRS built upon a Boeing 601 platform, and as such it is the first TDRS to experience these age-related failures. The most prevalent elements of the power subsystem to decline are the solar array circuitry and the Bus Voltage Limiters (BVLs), which prevent too much power from the solar arrays being transferred to the bus by shunting excess current. This means that while the loss of solar array circuits introduces concerns that the solar arrays will continue providing the spacecraft with enough current to remain power positive, the loss of BVLs introduces a concern that the bus may not be adequately protected from overvoltage events. Spacecraft engineers at the TDRS primary ground terminal, the White Sands Complex (WSC) in Las Cruces, New Mexico, and at NASA's Goddard Space Flight Center (GSFC) have also been working in collaboration with Boeing to develop innovative techniques to extend the serviceable life of TDRS-8.

tdrs↗
NASA NTRS1977

Shuttle carrier aircraft flight tests

Since the Space Shuttle will need to be transported from its place of assembly to the launch site, a method has been developed whereby the Shuttle rides piggyback on a modified Boeing 747, called the Shuttle carrier aircraft (SCA). This paper describes tests of the SCA in its mated configuration. Tests include: flutter, found to decrease when fiberglass and wood fairings were added to the base of each supporting pylon; stability and control, found to be acceptable after damping with control pulses; noise and buffet, found high but acceptable; and climb, in which drag was marked but acceptable with the special rated thrust (SRT) power setting. Simulated launch maneuvers were undertaken at an airspeed of 273 KCAS. Transport of the Shuttle takes place with the Shuttle tail cone on, at a cruise speed of 288 KCAS at an altitude of 22,000 feet.

Fulton, F. L., Jr.↗
NASA NTRS1987

Research on catalysts for long-life closed-cycle CO2 laser oaperation

Long-life, closed-cycle operation of pulsed CO2 lasers requires catalytic CO-O2 recombination both to remove O2, which is formed by discharge-induced CO2 decomposition, and to regenerate CO2. Platinum metal on a tin-oxide substrate (Pt/SnO2) has been found to be an effective catalyst for such recombination in the desired temperature range of 25 to 100 C. This paper presents a description of ongoing research at NASA-Langley on Pt/SnO2 catalyzed CO-O2 recombination. Included are studies with rare-isotope gases since rare-isotope CO2 is desirable as a laser gas for enhanced atmospheric transmission. Results presented include: (1) the effects of various catalyst pretreatment techniques on catalyst efficiency; (2) development of a technique, verified in a 30-hour test, to prevent isotopic scrambling when C(O-18) and (O-18)2 are reacted in the presence of a common-isotope Pt/Sn(O-16)2 catalyst; and (3) development of a mathematical model of a laser discharge prior to catalyst introduction.

Sidney, Barry D.↗
NASA NTRS1991

Guidance for human interface with artificial intelligence systems

The beginning of a research effort to collect and integrate existing research findings about how to combine computer power and people is discussed, including problems and pitfalls as well as desirable features. The goal of the research is to develop guidance for the design of human interfaces with intelligent systems. Fault management tasks in NASA domains are the focus of the investigation. Research is being conducted to support the development of guidance for designers that will enable them to make human interface considerations into account during the creation of intelligent systems.

Potter, Scott S.↗
NASA NTRS1991

Propulsion system ground testing

The objective is to provide management visibility relative to the roles of simulation and propulsion system testing for future development programs through assessment of current propulsion related simulation capabilities and review of contributions from propulsion system test programs. The presentation is represented by viewgraphs.

Wood, Charles C.↗
NASA NTRS2008

Advanced Stirling Convertor (ASC)--From Technology Development to Future Flight Product

The Advanced Stirling Convertor (ASC) is being developed by Sunpower Inc. under contract to NASA s Glenn Research Center (GRC) with critical technology support tasks led by GRC. The ASC development, funded by NASA s Science Mission Directorate, started in 2003 as one of 10 competitively awarded contracts that were intended to address the power conversion needs of future Radioisotope Power Systems (RPS). The ASC technology has since evolved through progressive convertor builds and successful testing to demonstrate high conversion efficiency (38 percent), low mass (1.3 kg), hermetic sealing, launch vibration simulation, EMI characterization, and is undergoing extended operation. The GRC and Sunpower team recently delivered two ASC-E convertors to the Department of Energy (DOE) and Lockheed Martin Space Systems Company for integration onto the Advanced Stirling Radioisotope Generator Engineering Unit (ASRG EU) plus one spare. The design of the next build, called the ASC-E2, has recently been initiated and is based on the heritage ASC-E with design refinements to increase reliability margin and offer higher temperature operation and improve performance. The ASC enables RPS system specific power of about 7 to 8 W/kg. This paper provides a chronology of ASC development to date and summarizes technical achievements including advancements toward flight implementation of the technology on ASRG by as early as 2013.

Wong, Wayne A.↗
NASA NTRS2014

Traffic Aware Planner (TAP) Flight Evaluation

NASA's Traffic Aware Planner (TAP) is a cockpit decision support tool that has the potential to achieve significant fuel and time savings when it is embedded in the data-rich Next Generation Air Transportation System (NextGen) airspace. To address a key step towards the operational deployment of TAP and the NASA concept of Traffic Aware Strategic Aircrew Requests (TASAR), a system evaluation was conducted in a representative flight environment in November, 2013. Numerous challenges were overcome to achieve this goal, including the porting of the foundational Autonomous Operations Planner (AOP) software from its original simulation-based, avionics-embedded environment to an Electronic Flight Bag (EFB) platform. A flight-test aircraft was modified to host the EFB, the TAP application, an Automatic Dependent Surveillance Broadcast (ADS-B) processor, and a satellite broadband datalink. Nine Evaluation Pilots conducted 26 hours of TAP assessments using four route profiles in the complex eastern and north-eastern United States airspace. Extensive avionics and video data were collected, supplemented by comprehensive inflight and post-flight questionnaires. TAP was verified to function properly in the live avionics and ADS-B environment, characterized by recorded data dropouts, latency, and ADS-B message fluctuations. Twelve TAP-generated optimization requests were submitted to ATC, of which nine were approved, and all of which resulted in fuel and/or time savings. Analysis of subjective workload data indicated that pilot interaction with TAP during flight operations did not induce additional cognitive loading. Additionally, analyses of post-flight questionnaire data showed that the pilots perceived TAP to be useful, understandable, intuitive, and easy to use. All program objectives were met, and the next phase of TAP development and evaluations with partner airlines is in planning for 2015.

Maris, John M.↗
NASA NTRSDate not supplied

Development of Head-Trunk Coordination Measures for Monitoring Postflight Sensorimotor Readaptation Strategies

During exploration missions, individual health assessments will be required to account for variability in neurosensory adaptation and task readiness for the initial extravehicular activities (EVAs). Previous research has identified postflight vestibular alterations and disruptions in head-trunk coordination after both short and long duration spaceflight missions. Astronauts were found to minimize head angular displacement and utilize a consistent forward head tilt theorized as a compensatory approach to stabilize the cephalic system and reduce motion sickness during readaptation to Earth’s gravity. Further, anecdotal self-reports from Shuttle crewmembers stated that pitch and side-to-side head movements immediately post-landing typically resulted in perceived angular self-motion. Notable disruptions also occur upon arrival in orbit, with astronauts choosing waist rotation rather than head movements during dynamic tasks. It is thought that the underlying sensorimotor disruptions may contribute to motion sickness in space and upon landing, postflight gait dysfunction, and inaccurate spatial orientation when performing daily tasks. To better characterize microgravity-induced sensorimotor adaptations, it is important to develop measures and monitoring tools that have high sensitivity in detecting changes in head-trunk coordination.

H M Weiss↗
NASA NTRS1987

Pretreatment of Platinum/Tin Oxide-Catalyst

Addition of CO to He pretreatment doubles catalytic activity. In sealed, high-energy, pulsed CO2 laser, CO and O2 form as decomposition products of CO2 in laser discharge zone. Products must be recombined, because oxygen concentration of more than few tenths of percent causes rapid deterioration of power, ending in unstable operation. Promising low-temperature catalyst for combining CO and O2 is platinum on tin oxide. New development increases activity of catalyst so less needed for recombination process.

Hess, Robert V.↗
NASA NTRS2000

Accuracy of Numerical Simulations of Tip Clearance Flow in Transonic Compressor Rotors Improved Dramatically

The tip clearance flows of transonic compressor rotors have a significant impact on rotor and stage performance. Although numerical simulations of these flows are quite sophisticated, they are seldom verified through rigorous comparisons of numerical and measured data because, in high-speed machines, measurements acquired in sufficient detail to be useful are rare. Researchers at the NASA Glenn Research Center at Lewis Field compared measured tip clearance flow details (e.g., trajectory and radial extent) of the NASA Rotor 35 with results obtained from a numerical simulation. Previous investigations had focused on capturing the detailed development of the jetlike flow leaking through the clearance gap between the rotating blade tip and the stationary compressor shroud. However, we discovered that the simulation accuracy depends primarily on capturing the detailed development of a wall-bounded shear layer formed by the relative motion between the leakage jet and the shroud.

VanZante, Dale E.↗
NASA NTRS2021

Land-Use Harmonization Datasets for Global Carbon Budget 2019 and Beyond

Land-use change has been the dominant source of anthropogenic carbon emissions for most of the historical period, and is currently one of the largest and most uncertain components of the global carbon cycle. Advancing the scientific understanding on this topic requires that the best data be used as input to the best models in well-organized scientific assessments. The Land-Use Harmonization dataset (LUH2), previously developed and used as input for CMIP6 simulations, has been updated annually to provide required input to land models in the annual Global Carbon Budget (GCB) assessment. These annual LUH2-GCB updates and extensions have incorporated annual FAO wood harvest data updates for dataset years after 2015 and HYDE gridded agriculture area data updates (based on annual FAO agricultural area data updates) for dataset years after 2012, along with extrapolations to the current year due to a lag of one or more years in the FAO data releases. The resulting updated LUH2-GCB datasets have provided global, annual gridded land-use and land-use change data relating toagricultural expansion, deforestation, wood harvesting, shifting cultivation, regrowth and afforestation, and crop rotationsand pasture managementand are used by both book-keeping models and Dynamic Global Vegetation Models (DGVMs) for the GCB. For GCB 2019,a more significant update to LUH2 was produced (LUH2-GCB2019) to correct cropland and grazing area errors in the underlying input datasets for the globally important region of Brazil, as far back as 1950. From 1951-2012 the LUH2-GCB2019 dataset begins to diverge from the LUH2 v2hdataset, with peak differences in Brazil in the year 2000 for grazing land (difference of 100,000 km2) and in the year 2009 for cropland (difference of 77,000 km2), along with significant sub-national reorganization of agricultural land-use patterns within Brazil. These LUH2-GCB2019 corrections for Brazil provide the base for future LUH2-GCB updates including the recent LUH2-GCB2020 dataset, and present a starting point for operationalizing the creation of these datasets toreduce time-lags due to the multiple input dataset and model latencies.

L Chini↗
NASA NTRS1986

Canopy reflectance modeling in a tropical wooded grassland

A study area was selected in West Africa in order to establish a relationship between rainfall and grassland productivity, and also to provide ground measurements and support for the GIMMS investigation of the use of AVHRR vegetation index data for monitoring grassland biomass and productivity. Field data collection, image and collateral data acquisition, model development, and data analysis and processing are briefly discussed.

Simonett, D.↗
NASA NTRS2024

Platte River Basin Water Resources II: Predicting Land Cover Change in the Platte River Basin to Select Wetland Protection Sites Vulnerable to Urban Encroachment

The Platte River Basin (PRB) represents a critical dynamic ecosystem where wetlands play a pivotal role as essential habitats for local and migratory birds, as well as various flora and fauna. It also provides many crucial ecosystem services that directly and indirectly benefit human welfare. However, it is threatened by anthropogenic activity, climate change, and urbanization. Our team partnered with Audubon Great Plains, the regional office of a national non-profit organization (NGO), to analyze the future potential development of the region and its potential impact on the wetlands. We utilized remotely sensed data, such as Landsat 8 Operational Land Imager (OLI) and Suomi National Polar Orbiting Partnership (NPP) Visible Infrared Imaging Radiometer Suite (VIIRS), as well as NASA Socioeconomic Data and Application Center (SEDAC) data, to simulate urban growth potential up to 2050 using the open-source model FUTure Urban-Regional Environment Simulation (FUTURES) model. Our results for two proposed scenarios (all wetlands are protected, and no wetlands are protected) revealed that at least 56 counties out of 81 in the PRB would experience growth by the year 2050. The results for the first scenario show that there will be no loss of wetlands in the future. However, the results for the second scenario indicate a basin-wide reduction of 43.22 square kilometers (0.58%) in wetland areas, leading to a significant loss of bird habitat, critical for conservation. The results will help Audubon Great Plains' Urban Woods and Prairies Initiative to lead awareness workshops for communities about wetland protection and to form impactful conservation strategies.

FUTURES↗
NASA NTRS1969

Beryllium fastener technology

Program was conducted to develop, produce, and test optimum-configuration, beryllium prestressed and blind fasteners. The program was carried out in four phases - phase 1, feasibility study, phase 2, development, phase 3, evaluation of beryllium alloys, and phase 4, fabrication and testing.

Glackin, J. J.↗
NASA NTRS1985

Report of the Technology and Test Panel

The state of technology relative to the Tethered Satellite System (TSS) was reviewed. The technology areas which could benefit from the TSS were defined. To support TSS design studies it is necessary to develop tether dynamic model computer codes for definition of mission and tether requirements. Present major codes are very elaborate, expensive to run, and not very user friendly. An additional technology concern was related to the manufacturing of tethers. The development of complex tethers (nonconducting-taper/double taper long 100 km, conducting-embedded conduction, fiber optics, and superconducting) and their applications to space stations requires the development of manufacturing capabilities for both Earth-based as well as space-based systems.

Siemers, P.↗