Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Growth of highly strained CeO 2 ultrathin films

Large biaxial strain is a promising route to tune the functionalities of oxide thin films. However, large strain is often not fully realized due to the formation of misfit dislocations at the film/substrate interface. In this work, we examine the growth of strained ceria (CeO 2 ) thin films on (001)-oriented single crystal yttria-stabilized zirconia (YSZ) via pulsed-laser deposition. By varying the film thickness systematically between 1 and 430 nm, we demonstrate that ultrathin ceria films are coherently strained to the YSZ substrate for thicknesses up to 2.7 nm, despite the large lattice mismatch (~5%). The coherency is confirmed by both X-ray diffraction and high-resolution transmission electron microscopy. This thickness is several times greater than the predicted equilibrium critical thickness. Partial strain relaxation is achieved by forming semirelaxed surface islands rather than by directly nucleating dislocations. In situ reflective high-energy electron diffraction during growth confirms the transition from 2-D (layer-by-layer) to 3-D (island) at a film thickness of ~1 nm, which is further supported by atomic force microscopy. We propose that dislocations likely nucleate near the surface islands and glide to the film/substrate interface, as evidenced by the presence of 60° dislocations. Finally, an improved understanding of growing oxide thin films with a large misfit lays the foundation to systematically explore the impact of strain and dislocations on properties such as ionic transport and redox chemistry.

36 MATERIALS SCIENCE↗

Polaritonic Probe of an Emergent 2D Dipole Interface

The use of work-function-mediated charge transfer has recently emerged as a reliable route toward nanoscale electrostatic control of individual atomic layers. Using α-RuCl 3 as a 2D electron acceptor, we are able to induce emergent nano-optical behavior in hexagonal boron nitride (hBN) that arises due to interlayer charge polarization. Using scattering-type scanning near-field optical microscopy (s-SNOM), we find that a thin layer of α-RuCl 3 adjacent to an hBN slab reduces the propagation length of hBN phonon polaritons (PhPs) in significant excess of what can be attributed to intrinsic optical losses. Concomitant nano-optical spectroscopy experiments reveal a novel resonance that aligns energetically with the region of excess PhP losses. These experimental observations are elucidated by first-principles density-functional theory and near-field model calculations, which show that the formation of a large interfacial dipole suppresses out-of-plane PhP propagation. Finally, our results demonstrate the potential utility of charge-transfer heterostructures for tailoring optoelectronic properties of 2D insulators.

36 MATERIALS SCIENCE↗

Relaxation and critical strain for maximum In incorporation in AlInGaN on GaN grown by metal organic vapour phase epitaxy

Quaternary AlInGaN layers were grown on conventional GaN buffer layers on sapphire by metal organic vapour phase epitaxy at different surface temperatures and different reactor pressures with constant precursor flow conditions. A wide range in compositions within 30-62% Al, 5-29% In, and 23-53% Ga was covered, which leads to different strain states from high tensile to high compressive. From high-resolution x-ray diffraction and Rutherford backscattering spectrometry, we determined the compositions, strain states, and crystal quality of the AlInGaN layers. Atomic force microscopy measurements were performed to characterize the surface morphology. A critical strain value for maximum In incorporation near the AlInGaN/GaN interface is presented. For compressively strained layers, In incorporation is limited at the interface as residual strain cannot exceed an empirical critical value of about 1.1%. Relaxation occurs at about 15 nm thickness accompanied by strong In pulling. Tensile strained layers can be grown pseudomorphically up to 70 nm at a strain state of 0.96%. A model for relaxation in compressively strained AlInGaN with virtual discrete sub-layers, which illustrates the gradually changing lattice constant during stress reduction is presented.

36 MATERIALS SCIENCE↗

Radiation induced cavity formation and gold precipitation at the interfaces of a ZrO2/SiO2/Si heterostructure

Thin films nano-crystalline zirconia of ~ 300 nm thick were deposited on Si substrate, and the samples were irradiated with 2 MeV Au+ ions at temperatures of 160 and 400 K, up to fluences of 35 displacements per atom. The films were then studied using glancing incidence x-ray diffraction, Rutherford backscattering, secondary ion mass spectroscopy and transmission electron microscopy. During the irradiation, cavities were observed to form at the zirconia/silicon interface. The morphology of the cavities was found to be related to the damage state of the underlying Si substrate. Elongated cavities were observed when the substrate is heavily damaged but not amorphized; however, when the substrate is rendered amorphous, the cavities become spherical. As the ion dose increases, the cavities then act as efficient gettering sites for the Au. The concentration of oxygen within the cavities determines the order in which the cavities getter. Following complete filling of the cavities, the interface acts as the secondary gettering site for the Au. The Au precipitates are determined to be elemental in nature due to the high binding free energy for the formation of Au-silicides.

36 MATERIALS SCIENCE↗

Understanding the Mechanism of Electronic Defect Suppression Enabled by Nonidealities in Atomic Layer Deposition

Silicon germanium (SiGe) is a multifunctional material considered for quantum computing, neuromorphic devices, and CMOS transistors. However, implementation of SiGe in nanoscale electronic devices necessitates suppression of surface states dominating the electronic properties. The absence of a stable and passive surface oxide for SiGe results in the formation of charge traps at the SiGe-oxide interface induced by GeOx. In an ideal ALD process in which oxide is grown layer by layer, the GeO x formation should be prevented with selective surface oxidation (i.e., formation of an SiO x interface) by controlling the oxidant dose in the first few ALD cycles of the oxide deposition on SiGe. However, in a real ALD process, the interface evolves during the entire ALD oxide deposition due to diffusion of reactant species through the gate oxide. In this work, this diffusion process in nonideal ALD is investigated and exploited: the diffusion through the oxide during ALD is utilized to passivate the interfacial defects by employing ozone as a secondary oxidant. Periodic ozone exposure during gate oxide ALD on SiGe is shown to reduce the integrated trap density (D it ) across the band gap by nearly 1 order of magnitude in Al 2 O 3 (<6 × 10 10 cm -2 ) and in HfO 2 (<3.9 × 10 11 cm -2 ) by forming a SiO x -rich interface on SiGe. Depletion of Ge from the interfacial layer (IL) by enhancement of volatile GeO x formation and consequent desorption from the SiGe with ozone insertion during the ALD growth process is confirmed by electron energy loss spectroscopy (STEM-EELS) and hypothesized to be the mechanism for reduction of the interfacial defects. In this work, the nanoscale mechanism for defect suppression at the SiGe-oxide interface is demonstrated, which is engineering of diffusion species in the ALD process due to facile diffusion of reactant species in nonideal ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

An optical study based on spectroscopic ellipsometry, performed on ultrathin hydrogenated amorphous silicon (a-Si:H) layers, is presented in this work. Ultrathin layers of intrinsic amorphous silicon have been deposited on n-type mono-crystalline silicon (c-Si) wafers by plasma enhanced chemical vapor deposition (PECVD). The layer thicknesses along with their optical properties –including their refractive index and optical loss- were characterized by spectroscopic ellipsometry (SE) in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap. Furthermore, the a-Si:H film grown on silicon was etched at a controlled rate using a TMAH solution prepared at room temperature. The optical properties along with the Tauc-Lorentz fitting parameters were extracted from the model as the film thickness was reduced. The etch rate for ultrathin a-Si:H layers in TMAH at room temperature was found to slow down drastically as the c-Si interface is approached. From the Tauc-Lorentz parameters obtained from SE, it was found that the a-Si film exhibited properties that evolved with thickness suggesting that the deposited film is non-homogeneous across its depth. It was also found that the degree of crystallinity and optical (Tauc) bandgap increased as the layers were reduced in thickness and coming closer to the c-Si substrate interface, suggesting the presence of nano-structured clusters mixed into the amorphous phase for the region close to the crystalline silicon substrate. Further results from Atomic Force Microscopy and Transmission Electron Microscopy confirmed the presence of an interfacial transitional layer between the amorphous film and the underlying substrate showing silicon nano-crystalline enclosures that can lead to quantum confinement effects. Quantum confinement is suggested to be the cause of the observed increase in the optical bandgap of a-Si:H films close to the a-Si:H/cSi interface.

36 MATERIALS SCIENCE↗

All dielectric hard x-ray mirror by atomic layer deposition

Mirrors consisting of Al{sub 2}O{sub 3} and Ta{sub 2}O{sub 5} ({approx}2 nm film thickness) nanolaminates for hard x-ray wavelengths were produced by atomic layer deposition and characterized. Atomic force microscopy and transmission electron microscopy (TEM) proved extremely smooth surfaces of the mirrors, which are critical for highest reflectance. TEM images showed sharp interfaces between the oxides. The experimental x-ray reflectivity data were theoretically modeled and indicated minimal random thickness variations in the individual layers. Additionally, a depth graded sample with a total thickness of {approx}4 {mu}m for focusing applications in transmission (Laue) geometry and capillaries was coated.

36 MATERIALS SCIENCE↗

Conductive atomic force microscopy study of local electronic transport in ZnTe thin films

ZnTe thin films obtained by the electron beam evaporation technique were subjected to thermal annealing at 500 Degree-Sign C for 2 hours. The as deposited films were amorphous but transformed to the crystalline state under influence of the thermal treatment. There is increase in optical absorption due to the heat treatment caused by increase in free carrier concentration. Conductive atomic force microscopy shows the presence of electronic inhomogeneities in the films. This is attributed to local compositional variations in the films. I-V analysis in these systems indicates formation of Schottky junction at the metal semiconductor (M-S) interface.

36 MATERIALS SCIENCE↗

Phonons and defects in semiconductors and nanostructures: Phonon trapping, phonon scattering, and heat flow at heterojunctions

Defects in semiconductors introduce vibrational modes that are distinct from bulk modes because they are spatially localized in the vicinity of the defect. Light impurities produce high-frequency modes often visible by Fourier-transform infrared absorption or Raman spectroscopy. Their vibrational lifetimes vary by orders of magnitude and sometimes exhibit unexpectedly large isotope effects. Heavy impurities introduce low-frequency modes sometimes visible as phonon replicas in photoluminescence bands. But other defects such as surfaces or interfaces exhibit spatially localized modes (SLMs) as well. All of them can trap phonons, which ultimately decay into lower-frequency bulk phonons. When heat flows through a material containing defects, phonon trapping at localized modes followed by their decay into bulk phonons is usually described in terms of phonon scattering: defects are assumed to be static scattering centers and the properties of the defect-related SLMs modes are ignored. These dynamic properties of defects are important. In this paper, we quantify the concepts of vibrational localization and phonon trapping, distinguish between normal and anomalous decay of localized excitations, discuss the meaning of phonon scattering in real space at the atomic level, and illustrate the importance of phonon trapping in the case of heat flow at Si/Ge and Si/C interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reductive Dissolution Mechanisms at the Hematite-Electrolyte Interface Probed by In Situ X-ray Scattering

The electron-catalyzed dissolution and reprecipitation of iron (oxyhydr)oxides constitute critical steps in natural geochemical iron cycling. However, the atomic-scale mechanisms of reductive dissolution and oxidative precipitation of Fe2+ remain poorly understood because they are difficult to directly experimentally probe. Using in situ synchrotron X-ray scattering and a novel electrochemical cell, we interrogate the interfacial structure between the hematite (?-Fe2O3) (11 ¯02) surface and acidic aqueous solution (5 mM Na2SO4, pH 4.0) under controlled electrochemical potential from open circuit to cathodic bias as the reductive dissolution potential is approached and then exceeded. The crystalline order of the surface improves under mild reducing conditions, and the surface Fe stoichiometry changes with cathodic bias. After significant reductive dissolution occurs and cathodic bias is removed, dissolved Fe is re-deposited, forming a disordered interface. Unlike at circumneutral pH, water layers at the hematite interface with acidic solution are poorly ordered, likely due to the adsorption of sulfate from the electrolyte. These results provide a novel atomic-scale view into the behavior of reducible transition metal oxide surfaces under fluctuating (electro)chemical conditions.

McBriarty, Martin E.↗

Reduction of thermal conductivity in MnSi{sub 1.7} multi-layered thin films with artificially inserted Si interfaces

We report a lowered lattice thermal conductivity in nm-scale MnSi{sub 1.7}/Si multilayers which were fabricated by controlling thermal diffusions of Mn and Si atoms. The thickness of the constituent layers is 1.5–5.0 nm, which is comparable to the phonon mean free path of both MnSi{sub 1.7} and Si. By applying the above nanostructures, we reduced the lattice thermal conductivity down to half that of bulk MnSi{sub 1.7}/Si composite materials. The obtained value of 1.0 W/K m is the experimentally observed minimum in MnSi{sub 1.7}-based materials without any heavy element doping and close to the minimum thermal conductivity. We attribute the reduced lattice thermal conductivity to phonon scattering at the MnSi{sub 1.7}/Si interfaces in the multilayers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silicon carbide: A unique platform for metal-oxide-semiconductor physics

A sustainable energy future requires power electronics that can enable significantly higher efficiencies in the generation, distribution, and usage of electrical energy. Silicon carbide (4H-SiC) is one of the most technologically advanced wide bandgap semiconductor that can outperform conventional silicon in terms of power handling, maximum operating temperature, and power conversion efficiency in power modules. While SiC Schottky diode is a mature technology, SiC power Metal Oxide Semiconductor Field Effect Transistors are relatively novel and there is large room for performance improvement. Specifically, major initiatives are under way to improve the inversion channel mobility and gate oxide stability in order to further reduce the on-resistance and enhance the gate reliability. Both problems relate to the defects near the SiO{sub 2}/SiC interface, which have been the focus of intensive studies for more than a decade. Here we review research on the SiC MOS physics and technology, including its brief history, the state-of-art, and the latest progress in this field. We focus on the two main scientific problems, namely, low channel mobility and bias temperature instability. The possible mechanisms behind these issues are discussed at the device physics level as well as the atomic scale, with the support of published physical analysis and theoretical studies results. Some of the most exciting recent progress in interface engineering for improving the channel mobility and fundamental understanding of channel transport is reviewed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nature of Ptn/TiO2(110) Interface under Water-Gas Shift Reaction Conditions: A Constrained ab Initio Thermodynamics Study

The electronic structure of small Ptn (n = 1-8) clusters supported on the stoichiometric and partially reduced rutile TiO2(110) surface have been investigated using density functional theory. Pt atoms prefer to form a close-packed structure with (111) facet near an oxygen vacancy of the TiO2 support and a less dense structure with (100) facet away from oxygen vacant sites. Themain focus of this study is on identifying a realistic catalyst model for the Pt/TiO2 interface under watergas shift (WGS) reaction conditions. Constrained ab initio thermodynamic simulations on the stability of oxygen vacancies and formation of adsorbed gas phase molecules such as oxygen, CO, and hydrogen at the metal/oxide interface reveal that under WGS reaction conditions the formation of surface oxygen vacancies are thermodynamically favorable, platinum oxide species (PtOx) can easily be reduced and should not be present, CO adsorbs only weakly on interfacial Pt atoms, and CO poisoning of these sites should be less important. While hydrogen generally interacts weakly with interfacial Pt atoms, it forms very stable hydride species on Pt atoms neighboring an oxygen vacancy of the TiO2(110) support, possibly negatively affecting the WGS reaction rate.

Environmental Molecular Sciences Laboratory↗

Doping dependent magnetism and exchange bias in CaMn{sub 1−x}W{sub x}O{sub 3} manganites

Magnetic properties of CaMn{sub 1−x}W{sub x}O{sub 3} (0 ≤ x ≤ 0.1) have been investigated, and the research was focused on the exchange bias (EB) phenomenon in CaMn{sub 0.93}W{sub 0.07}O{sub 3}. Magnetic ground state was found to be dependent on tungsten doping level and the following states were distinguished: (i) G-type antiferromagnetic (AFM) state with a weak ferromagnetic (FM) component at x = 0 and 0.04; (ii) mostly orbitally ordered C-type AFM at x = 0.07 and 0.1. For the studied manganites, spontaneous magnetization increases sharply with increasing doping level reaching M{sub 0} ≈ 9.5 emu/g at T = 10 K for x = 0.04, and then decreases rapidly reaching zero for x = 0.1. Exchange bias effect, manifested by vertical and horizontal shifts in the hysteresis loop for field cooled sample, has been observed in CaMn{sub 0.93}W{sub 0.07}O{sub 3}. Exchange bias field, coercivity, remanence asymmetry, and magnetic coercivity depend strongly on temperature, cooling field, and maximal measuring field. Horizontal and vertical shifts of magnetization loop sharply decrease with increasing temperature and vanish above 70 K, whereas coercivity and magnetic coercivity disappear only above 100 K (temperature of transition to the G-type AFM state). The exchange bias field H{sub EB} increases with increasing cooling field H{sub cool} and goes through a broad maximum at 40 kOe, while the remanence asymmetry increases monotonously in the entire investigated cooling field range, up to 50 kOe. For the compound with x = 0.07, the size of the FM regions ≈2 nm was estimated from the dependence of exchange bias field H{sub EB} upon H{sub cool}. It is suggested that the exchange bias originates from interface exchange coupling between small FM clusters and the G-type AFM phase inside the primary C-type orbitally ordered AFM phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of controlled surface oxidation on the magnetic anisotropy of Co ultrathin films

We studied the influence of controlled surface-limited oxidation of electrodeposited epitaxial Co(0001)/Au(111) films on their magnetic anisotropy energy using real time in situ magneto optical Kerr effect and density functional theory (DFT) calculations. We investigated the Co first electrochemical oxidation step which we demonstrate to be completely reversible and determined the structure of this oxide layer. We show that the interface magnetic anisotropy of the Co film increases by 0.36 erg/cm{sup 2} upon Co surface oxidation. We performed DFT calculations to determine the different surface structures in a wide potential range as well as the charge transfer at the Co surface. Our results suggest that the magnetic anisotropy change is correlated with a positive charge increase of 0.54 e{sup −} for the Co surface atom upon oxidation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of the Langmuir–Schaefer method for fabrication of ordered protein films

A modification of the Langmuir–Schaefer method for the fabrication of high-quality protein films on a solid substrate was proposed and applied to lysozyme. The procedure relies on the use of a pre-prepared protein solution, the parameters of which correspond to crystallization conditions. A lysozyme Langmuir monolayer was shown to be formed with the involvement of complexes, namely, dimers and octamers of protein molecules that are present in such protein solutions. These complexes apparently retain the structure after spreading a protein solution onto an aqueous subphase in a Langmuir trough. The thickness of the film after the transfer of the monolayer, which was formed by the proposed procedure, onto a solid substrate corresponds to the diameter of the octamer and this film is dense, continuous, and uniform, as was demonstrated by several methods: X-ray reflectivity, total external reflection X-ray standing wave, and atomic force microscopy. A layer of chloride ions that formed under the Langmuir monolayer was found at the air–protein film interface. This fact confirms an important role of the precipitating agent (chloride ions) in all steps of the formation of lysozyme films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Precipitation-site competition in duplex stainless steels: Cu clusters vs spinodal decomposition interfaces as nucleation sites during thermal aging

Competing microstructural evolution mechanisms can exist simultaneously when duplex stainless steels are operating for several decades in a high temperature service environment. Such competition between different microstructural evolution pathways can be difficult to ascertain using simple model alloy systems necessitating detailed structural and compositional analysis of phase transformation mechanisms in complex alloys Thus, in this study duplex stainless steels with complex but well understood chemistries were used to investigate the relative importance of different heterogeneous nucleation sites – specifically spinodal decomposition and Cu clustering – on precipitation of Ni-Si-Mn particles during long term thermal aging. Precipitation of Ni-Si-Mn particles in duplex stainless steels and ferritic steels during thermal aging and irradiation is known to have profound effect on mechanical properties. Using duplex stainless steels with custom modified compositions along with atom probe tomography characterization and first-passage kinetic Monte Carlo (FPKMC) simulations it is revealed that while the interface between Cr and Fe formed during spinodal decomposition can be a pathway for diffusion of Ni, Si, Mn, and Cu, it is not a site that encourages precipitation of Ni-Si-Mn rich particles. Instead, the presence of a higher concentration of Cu in these steels leads to formation of small Cu clusters with high energy interfaces that act as nucleation sites for Ni-Si-Mn particles because of its strong interaction particularly with Ni increasing the chemical driving force for precipitation. These results will help inform predictive models for the use of duplex stainless steels and other precipitation-hardened alloys for extended operation at high temperatures.

Duplex stainless steel, Thermal aging, Precipitati↗

Carbon Displacement-Induced Single Carbon Atomic Chain Formation and its Effects on Sliding of SiC Fibers in SiC/graphene/SiC Composite

Understanding radiation effects on the mechanical properties of SiC composites is important to their application in advanced reactor designs. By means of molecular dynamics simulations, we found that due to strong interface bonding between the graphene layers and SiC, the sliding friction of SiC fibers is largely determined by the frictional behavior between graphene layers. Upon sliding, carbon displacements between graphene layers can act as seed atoms to induce the formation of single carbon atomic chains (SCACs) by pulling carbon atoms from the neighboring graphene planes. The formation, growth, and breaking of SCACs determine the frictional response to irradiation.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.