Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Tri-axial Shape Coexistence and a New Aligned Band in {sup 178}Os

The Os nuclei lie in the beginning of the transitional region between the well deformed rare earth and spherical lead isotopes. The nuclei in this region are believed to be soft to changes in gamma deformation due to the softness of nuclear potential which may result in the shape coexistence. The neutron Fermi levels in Os nuclei from A = 170 to A = 186 lie in the middle of i{sub 13/2} orbital so that their shape in the ground state tends to take an appreciable prolate deformation. Hence collective bands with the well defined moment of inertia occur and the effect of different proton orbitals is observed as a modulation of the prolate structure. The anomalies in the yrast sequence, an effect attributed to change in moment of inertia of the ground state rotational band and the band crossing phenomena, are very important and vary strongly with neutron number in case of Os nuclei. The nuclear structure of {sup 178}Os nucleus has been studied using the reaction {sup 165}Ho({sup 20}Ne, p6n){sup 178}Os. Indian National Gamma Array (INGA) consisting of six Clover detectors with anti Compton shields was used for the detection of resulting gamma rays. The Direction Correlation of {gamma}-rays de-exciting Oriented states (DCO) ratio and polarization of gamma rays were measured to assign spin, parity and multipolarity of transitions. Twenty one new transitions belonging to the {sup 178}Os nucleus have been identified. The sudden and rather strong gain in aligned angular momentum is observed in the yrast band of {sup 178}Os. A new aligned rotational band similar to {sup 180}Os is also discovered in this nucleus. This band exhibits a very complex decay pattern with a single linking transition of 1778 keV to the ground state band. The tri-axial shape co-existence is also observed in this nucleus at higher excitation. The experimental results are compared with the Microscopic Hartree-Fock model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Morphological–Electrical Property Relation in Cu(In,Ga)(S,Se) 2 Solar Cells: Significance of Crystal Grain Growth and Band Grading by Potassium Treatment

Abstract Solution‐processed Cu(In,Ga)(S,Se) 2 (CIGS) has a great potential for the production of large‐area photovoltaic devices at low cost. However, CIGS solar cells processed from solution exhibit relatively lower performance compared to vacuum‐processed devices because of a lack of proper composition distribution, which is mainly instigated by the limited Se uptake during chalcogenization. In this work, a unique potassium treatment method is utilized to improve the selenium uptake judiciously, enhancing grain sizes and forming a wider bandgap minimum region. Careful engineering of the bandgap grading structure also results in an enlarged space charge region, which is favorable for electron–hole separation and efficient charge carrier collection. Besides, this device processing approach has led to a linearly increasing electron diffusion length and carrier lifetime with increasing the grain size of the CIGS film, which is a critical achievement for enhancing photocurrent yield. Overall, 15% of power conversion efficiency is achieved in solar cells processed from environmentally benign solutions. This approach offers critical insights for precise device design and processing rules for solution‐processed CIGS solar cells.

Kim, Joo‐Hyun↗

A fast multi-fidelity method with uncertainty quantification for complex data correlations: Application to vortex-induced vibrations of marine risers

Here we develop a fast multi-fidelity modeling method for very complex correlations between high- and low-fidelity data by working in modal space to extract the proper correlation function. We apply this method to infer the amplitude of motion of a flexible marine riser in cross-flow, subject to vortex-induced vibrations (VIV). VIV are driven by an absolute instability in the flow, which imposes a frequency (Strouhal) law that requires a matching with the impedance of the structure; this matching is easily achieved because of the rapid parametric variation of the added mass force. As a result, the wavenumber of the riser spatial response is within narrow bands of uncertainty. Hence, an error in wavenumber prediction can cause significant phase-related errors in the shape of the amplitude of response along the riser, rendering correlation between low- and high-fidelity data very complex. Working in modal space as outlined herein, dense data from low-fidelity data, provided by the semi-empirical computer code VIVA, can correlate in modal space with few high-fidelity data, obtained from experiments or fully-resolved CFD simulations, to correct both phase and amplitude and provide predictions that agree very well overall with the correct shape of the amplitude response. We also quantify the uncertainty in the prediction using Bayesian modeling and exploit this uncertainty to formulate an active learning strategy for the best possible location of the sensors providing the high fidelity measurements.

42 ENGINEERING↗

Role of nickel doping on structural, optical, magnetic properties and antibacterial activity of ZnO nanoparticles

Highlights: • The XRD analyses revealed that the synthesizes nickel doped ZnO (Zn{sub 1−x}Ni{sub x}O, x = 0.0, 0.03, 0.06 and 0.09) nanostructures have hexagonal wurtzite structure. • The photoluminescence measurements revealed that the broad emission was composed of different bands due to zinc and oxygen vacancies. • X-ray photoelectron spectroscopy (XPS) confirmed the Ni incorporation in ZnO lattice as Ni{sup 2+} ions. • Room temperature ferromagnetism was observed due to the oxygen vacancies and zinc interstitials are the main reasons for ferromagnetism in Ni doped ZnO NPs. - Abstract: Zn{sub 1−x}Ni{sub x}O nanoparticles were synthesized by co-precipitation method. The crystallite sizes of the synthesized samples found to decrease from 38 to 26 nm with increase in nickel concentration. FTIR spectra confirmed the presence of Zn−O stretching bands at 577, 573, 569 and 565 cm{sup −1} in the respective ZnO NPs. Optical absorption spectra revealed the red shifted and estimated band gap is found to decrease with increase of Ni doping concentration. The PL spectra of all the samples exhibited a broad emission at 390 nm in the visible range. The carriers (donors) bounded on the Ni sites were observed from the micro Raman spectroscopic studies. Pure and Ni doped ZnO NPs showed significant changes in the M–H loop, especially the diamagnetic behavior changed into ferromagnetic nature for Ni doped samples. The antiferromagnetic super-exchange interactions between Ni{sup 2+} ions is increased in higher Ni doped ZnO NPs and also their antibacterial activity has been studied.

36 MATERIALS SCIENCE↗

Electronic Structure and Performance Bottlenecks of CuFeO 2 Photocathodes

The path to realizing low-cost, stable, and earth-abundant photoelectrodes can be enabled through a detailed understanding of the optoelectronic properties of these materials by combining theory and experimental techniques. Of the limited set of oxide photocathode materials currently available, CuFeO 2 has emerged as a promising candidate warranting detailed attention. Here, highly compact thin films of rhombohedral (3R) CuFeO 2 were prepared via reactive co-sputtering. Despite its 1.43 eV indirect band gap, a cathodic photocurrent of 0.85 mA/cm 2 was obtained at 0.4 V versus reversible hydrogen electrode in the presence of a sacrificial electron acceptor. This unexpected performance was related to inefficient bulk charge separation because of the ultrafast (<1 ps) self-trapping of photogenerated free carriers. The electronic structure of 3R-CuFeO 2 was elucidated through a combination of optical and X-ray spectroscopic techniques and further complemented by first-principles computational methods including a many-body approach for computing the O K-edge X-ray absorption spectrum. Through resonant inelastic X-ray scattering spectroscopy, the visible absorption edges of CuFeO 2 were found to correspond to Cu → Fe metal-to-metal charge transfer, which exhibits a high propensity toward self-trapping. Findings of the present work enable us to understand the performance bottlenecks of CuFeO 2 photocathodes and suggest feasible strategies for improving material limitations.

36 MATERIALS SCIENCE↗

Electronic Structure and Properties of Berkelium Iodates

The reaction of 249 Bk(OH) 4 with iodate under hydrothermal conditions results in the formation of Bk(IO 3 ) 3 as the major product with trace amounts of Bk(IO 3 ) 4 also crystallizing from the reaction mixture. The structure of Bk(IO 3 ) 3 consists of nine-coordinate Bk III cations that are bridged by iodate anions to yield layers that are isomorphous with those found for Am III , Cf III , and with lanthanides that possess similar ionic radii. Bk(IO 3 ) 4 was expected to adopt the same structure as M(IO 3 ) 4 (M = Ce, Np, Pu), but instead parallels the structural chemistry of the smaller Zr IV cation. Bk III –O and Bk IV –O bond lengths are shorter than anticipated and provide further support for a postcurium break in the actinide series. Photoluminescence and absorption spectra collected from single crystals of Bk(IO 3 ) 4 show evidence for doping with Bk III in these crystals. In addition to luminescence from Bk III in the Bk(IO 3 ) 4 crystals, a broad-band absorption feature is initially present that is similar to features observed in systems with intervalence charge transfer. However, the high-specific activity of 249 Bk ( t 1/2 = 320 d) causes oxidation of Bk III and only Bk IV is present after a few days with concomitant loss of both the BkIII luminescence and the broadband feature. The electronic structure of Bk(IO 3 ) 3 and Bk(IO 3 ) 4 were examined using a range of computational methods that include density functional theory both on clusters and on periodic structures, relativistic ab initio wave function calculations that incorporate spin–orbit coupling (CASSCF), and by a full-model Hamiltonian with spin–orbit coupling and Slater–Condon parameters (CONDON). Some of these methods provide evidence for an asymmetric ground state present in Bk IV that does not strictly adhere to Russel–Saunders coupling and Hund’s Rule even though it possesses a half-filled 5 f 7 shell. Multiple factors contribute to the asymmetry that include 5 f electrons being present in microstates that are not solely spin up, spin–orbit coupling induced mixing of low-lying excited states with the ground state, and covalency in the Bk IV –O bonds that distributes the 5f electrons onto the ligands. These factors are absent or diminished in other f 7 ions such as Gd III or Cm III .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pulsed laser deposition of Mn doped CdSe quantum dots for improved solar cell performance

In this work, we demonstrate (1) a facile method to prepare Mn doped CdSe quantum dots (QDs) on Zn{sub 2}SnO{sub 4} photoanodes by pulsed laser deposition and (2) improved device performance of quantum dot sensitized solar cells of the Mn doped QDs (CdSe:Mn) compared to the undoped QDs (CdSe). The band diagram of photoanode Zn{sub 2}SnO{sub 4} and sensitizer CdSe:Mn QD is proposed based on the incident-photon-to-electron conversion efficiency (IPCE) data. Mn-modified band structure leads to absorption at longer wavelengths than the undoped CdSe QDs, which is due to the exchange splitting of the CdSe:Mn conduction band by the Mn dopant. Three-fold increase in the IPCE efficiency has also been observed for the Mn doped samples.

36 MATERIALS SCIENCE↗

High pressure effect on optical gain in type-II InGaAs/GaAsSb nano-heterostructure

This paper reports the simulation of optical gain in type-II InGaAs/GaAsSb quantum well based nano-scale heterostructure. In order to simulate the optical gain, the heterostructure has been modeled with the help of six band k.p method. The 6 × 6 diagonalized k.p Hamiltonian has been solved to evaluate the valence sub-bands (i.e. light and heavy hole energies); and then optical matrix elements and optical gain within TE (Transverse Electric) mode has been calculated. The results obtained suggest that peak optical gain of the order of ∼ 9000 /cm in the heterostructure can be achieved at the lasing wavelength ∼ 1.95 µm (SWIR region). The application of high pressure (2 and 5 GPa) on the structure shows that the gain as well as lasing wavelength both approach to higher values. Thus, the structure can be tuned externally by the application of high pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annealing effect on structural and optical properties of chemical bath deposited MnS thin film

MnS thin film was prepared by the chemical bath deposition (CBD) method on commercial microscope glass substrate deposited at 30 °C. The as-deposited film was given thermal annealing treatment in air atmosphere at various temperatures (150, 300 and 450 °C) for 1 h. The MnS thin film was characterized by using X-ray diffraction (XRD), UV-vis spectrophotometer and Hall effect measurement system. The effect of annealing temperature on the structural, electrical and optical properties such as optical constants of refractive index (n) and energy band gap (E{sub g}) of the film was determined. XRD measurements reveal that the film is crystallized in the wurtzite phase and changed to tetragonal Mn{sub 3}O{sub 4} phase after being annealed at 300 °C. The energy band gap of film decreased from 3.69 eV to 3.21 eV based on the annealing temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Description of alpha decay and cluster radioactivity in the dinuclear system model

A unified description of cluster radioactivity and α-decay of cold nuclei in the dinuclear system model is proposed. Quantum dynamical fluctuations along the charge (mass) asymmetry coordinate determine the spectroscopic factor, and tunneling along the relative distance coordinate determines the penetrability of the barrier of the nucleus–nucleus interaction potential. A new method for calculating the spectroscopic factor is proposed. The hindrance factors for the orbital angular momentum transfer are studied. A potential reason for the half-life to deviate from the Geiger–Nuttall law in α-decays of neutron-deficient nuclei {sup 194,} {sup 196}Rn is found. The fine structure of α-decays of U and Th isotopes is predicted and characterized. The model is used to describe α-decays from the rotational band of even–even nuclei. The known half-lives in the regions of “lead” and “tin” radioactivities are reproduced well, and the most probable cluster yields are predicted. The cluster decay of excited nuclei is discussed. The relation of cluster radioactivity to spontaneous fission and highly deformed nuclear states is analyzed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Properties of amorphous carbon thin films grown by ion beam sputtering

The electrical performance of amorphous carbon thin films obtained by the ion beam sputtering of a carbon target in argon has been investigated. It has been shown by the Raman spectroscopy method that these films have a graphite-like structure. It has also been found by conductivity and thermopower studies that the hopping mechanism of conductivity with a variable length of hops over localized states near the Fermi level changes to the mechanism of hopping over the nearest neighbors as the temperature rises from 77 to 190 K. Near room temperature, electrotransport is provided by variable-length hops over localized states at the tail of the valence band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disintegration phenomena in Comet West

Two peculiarities of Comet West, the multiple splitting of the nucleus as seen in telescope observations and the complex structure of the dust tail, are discussed. A method of analysis based on the premise that the observed rate of separation of a fragment from the principal nucleus is determined by the difference in effective solar attraction acting on the bodies is applied to investigate the motion of the four fragments that separated from the nucleus of Comet West. The predicted motion of the fragments is in good agreement with available observations. It is suggested that the 'synchronic' bands of the dust tail consist of tiny fragments from relatively large particles that burst after release from the comet. The unusual orientation of these bands and their high surface brightness relative to the diffuse tail are explained by a sudden increase in the particle acceleration and in the total scattering surface as the result of the disintegration of the larger particles.

Sekanina, Z.↗

A model of asynchronous iterative algorithms for solving large, sparse, linear systems

Solving large, sparse, linear systems of equations is one of the fundamental problems in large scale scientific and engineering computation. A model of a general class of asynchronous, iterative solution methods for linear systems is developed. In the model, the system is solved by creating several cooperating tasks that each compute a portion of the solution vector. This model is then analyzed to determine the expected intertask data transfer and task computational complexity as functions of the number of tasks. Based on the analysis, recommendations for task partitioning are made. These recommendations are a function of the sparseness of the linear system, its structure (i.e., randomly sparse or banded), and dimension.

Reed, D. A.↗

Mode Profiles in Waveguide-Coupled Resonators

Surface acoustic wave (SAW) waveguide-coupled resonators are of considerable interest for narrow-band filter applications, though to date there has been very little published on the acoustic details of their operation. As in any resonator, one must fully understand its mode structure and herein we study the SAW mode profiles in these devices. Transverse mode profiles in the resonant cavity of the device were measured at various frequencies of interest using a knife-edge laser probe. In addition we predict the mode profiles for the device structure by two independent methods. One is a stack-matrix approach adapted from integrated optics and the other is a conventional analytical eigenmode analysis of the Helmholtz equation. Both modeling techniques are in good agreement with the measured results.

Hunt, William D.↗

Metal-Silicate Segregation in Deforming Dunitic Rocks: Applications to Core Formation in Europa and Ganymede

Core formation is an important event in the evolution of a planetary body, affecting both the geochemical and geophysical properties of the body. Metal-silicate segregation could have proceeded either by settling of liquid metal through a magma ocean or by percolation of liquid metal through a solid silicate mantle. Percolation of metallic melt had previously been excluded as a viable segregation mechanism because metallic melts do not form an interconnected network under hydrostatic conditions, except at high melt fraction (>5 vol%), due to the high dihedral angle between metals and silicates (>60 ). Without an interconnected network, porous flow of metallic melt is impossible, leaving the magma ocean scenario as the only mechanism to form the core. Moment-of-inertia measurements of Europa and Ganymede from the Galileo probe indicate that they are differentiated. This evidence suggests that a method for segregating metals and silicates at temperatures low enough to retain volatile compounds must exist. We have investigated the effect of deformation on the distribution of metallic melts in silicates. We have deformed samples of olivine + 5-9 vol% Fe-S to strains of 2.5 in simple shear and find that the metallic melt segregates into melt-rich planes oriented at 20 to the shear plane. These metallic melt-rich bands are similar in structure to the silicate melt-rich bands reported by Holtzman, indicating that deformation can interconnect isolated metallic melt pockets and allow porous flow of non-wetting melts. Such a core formation process could have occurred in the jovian satellites.

Hustoft, J. W.↗

A Review of Unmanned Aerial Vehicle Technology in Power Line Inspection

The electric power industry is one of the heaviest adopters of Unmanned Aerial Vehicles (UAV) technology, utilizing their versatility to enhance power line maintenance programs. For reliable power grids, routine maintenance operations and rapid repair operations are required across substantial geographical distances. Both maintenance and repair decisions are driven by assessment operations, such as inspections of mechanical structures with visible-band sensors, inspections for the presence of high voltage coronas and hot spots with multispectral sensors, and surveying of equipment and adjacent features (particularly vegetation) with photogrammetric and Light Detection and Ranging (LiDAR) sensors. Assessment was historically accomplished with manned helicopter flights or foot patrols. Recently, this critical economic segment harnessed advances in Unmanned Aerial Systems (UAS)technology to accomplish assessment tasks with faster results, lower cost, and higher levels of safety than historical methods. Adoption of UAVs in high-voltage electric power transmission activities is well underway. Adoption of UAVs for low voltage distribution activities is still emerging, with the important exception of post-storm damage assessment following major hurricanes (Harvey and Maria in 2017 and Michael in 2018). This report reviews the broad UAS adoption in high-voltage electric power transmission operations and early attempts at adoption in distribution operations. The ability to fly beyond visual line of sight (BVLOS) may increase the advantages of UAV inspection over former options, and in the United States, regulators have approved two pilot projects to demonstrate BVLOS methods and their benefits in operating and maintaining the power grid.

UAV↗

Less magnetic and larger Zr{sup 4+}–Zn{sup 2+} ions co-substituted structural and magnetic properties of ordered Li{sub 0.5}Fe{sub 2.5}O{sub 4} nanoparticles

Graphical abstract: - Highlights: • Zr{sup 4+} and Zn{sup 2+} co-substituted Li{sub 0.5}Fe{sub 2.5}O{sub 4}. • Crystallite size decreased with Zr{sup 4+} and Zn{sup 2+} co-substitution. • Magnetization results exhibit collinear ferrimagnetic structure for x = 0.2. • Yafet–Kittle angle exists between the observed and calculated magneton number. - Abstract: Samples of Zr{sup 4+} and Zn{sup 2+} co-substituted Li{sub 0.5}Fe{sub 2.5}O{sub 4} nanoparticles were prepared by the sol–gel auto-combustion method. The samples were obtained by annealing at relatively low temperature at 600 °C and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM) and Fourier transform infrared (FT-IR) spectroscopy. Lattice parameter, X-ray density, specific surface area and porosity were found to increase, whereas bulk density and crystallite size showed the decreasing trend with the Zr{sup 4+} and Zn{sup 2+} substitution. Cation distribution estimated from XRD results suggests that Zn{sup 2+} and Li{sup +} occupy tetrahedral A- and octahedral B-site respectively, whereas Zr{sup 4+} and Fe{sup 3+} occupy both the available sites. The FT-IR spectra show two major absorption bands at 715–749 cm{sup −1} (ν{sub 1}) and 484–507 cm{sup −1} (ν{sub 2}) related to spinel structure of ferrite. Magnetization results exhibit collinear ferrimagnetic structure for x ≤ 0.2, and changed to the non-collinear for x > 0.2. Observed and calculated magneton number shows discrepancy in their values that gives rise to Yafet–Kittle angle for x > 0.2.

36 MATERIALS SCIENCE↗

Lifshitz Transitions Induced by Temperature and Surface Doping in Type-II Weyl Semimetal Candidate T d -WTe 2

Using high resolution angle-resolved photoemission spectroscopy, we systematically investigate the electronic structure of T d -WTe 2 , which has attracted substantial research attention due to its diverse and fascinating properties, especially the predicted type-II topological Weyl semimetal (TWS) phase. The observed significant lattice contraction and the fact that our ARPES measurements are well reproduced by our ab initio calculations under reduced lattice constants support the theoretical prediction of a type-II TWS phase in T d -WTe 2 at temperatures below 10 K. We also investigate the evolution of the electronic structure of T d -WTe 2 and realize two-stage Lifshitz transitions induced by temperature regulation and surface modification, respectively. Furthermore, our results not only shed light on the understanding of the electronic structure of T d -WTe 2 , but also provide a promising method to manipulate the electronic structures and physical properties of the type-II TWS T d -XTe 2 .

36 MATERIALS SCIENCE↗

Refine your search to explore more results.