Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuse radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Propagation of radiation in fluctuating multiscale plasmas. II. Kinetic simulations

A numerical algorithm is developed and tested that implements the kinetic treatment of electromagnetic radiation propagating through plasmas whose properties have small scale fluctuations, which was developed in a companion paper. This method incorporates the effects of refraction, damping, mode structure, and other aspects of large-scale propagation of electromagnetic waves on the distribution function of quanta in position and wave vector, with small-scale effects of nonuniformities, including scattering and mode conversion approximated as causing drift and diffusion in wave vector. Numerical solution of the kinetic equation yields the distribution function of radiation quanta in space, time, and wave vector. Simulations verify the convergence, accuracy, and speed of the methods used to treat each term in the equation. The simulations also illustrate the main physical effects and place the results in a form that can be used in future applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-pile Thermal Conductivity Characterization with Time Resolved Raman

The project is designed to achieve three objectives: (1) Develop a novel time resolved Raman technology for direct measurement of fuel and cladding thermal conductivity. (2) Validate and improve the technology development by measuring ceramic materials germane to the nuclear industry. (3) Conduct instrumentation development to integrate optical fiber into our sensing system for eventual in-pile measurement. We have developed three new techniques: time-domain differential Raman (TD-Raman), frequency-resolved Raman (FR-Raman), and energy transport state-resolved Raman (ET-Raman). The TD-Raman varies the laser heating time and does simultaneous Raman thermal probing, the FR-Raman probes the material’s thermal response under periodical laser heating of different frequencies, and the ET-Raman probes the thermal response under steady and pulsed laser heating. The measurement capacity of these techniques have been fully assessed and verified by measuring micro/nanoscale materials. All these techniques do not need the data of laser absorption and absolute material temperature rise, yet still be able to measure the thermal conductivity and thermal diffusivity with unprecedented accuracy. It is expected they will have broad applications for in-pile thermal characterization of nuclear materials based on pure optical heating and sensing.

36 MATERIALS SCIENCE↗

The transient gamma-ray spectrometer

The authors describe the Transient Gamma-Ray Spectrometer (TGRS) to be flown onboard the WIND spacecraft. This instrument is designed to detect cosmic gamma-ray bursts over the energy range of 20 keV to 10 MeV with an expected spectroscopic resolution of 2 keV at 1 MeV (E/Delta-E = 500). The active detection element is a 215-cu cm high-purity n-type Ge crystal cooled to cryogenic temperatures by a passive radiative cooler. The geometric field of view (FOV) defined by the cooler is 170 deg FWFM. Burst data are stored directly in an onboard 2.75-Mb burst memory with an absolute timing accuracy of +/-1.5 ms. This capacity is sufficient to store the entire spectral data set of all but the largest bursts. In addition to burst measurements, the instrument will also study solar flares, search for possible diffuse background lines, and monitor the 511-keV positron annihilation radiation from the galactic center. The experiment is scheduled to be launched on a Delta II launch vehicle from Cape Canaveral on December 31, 1992.

Owens, A.↗

Frequency-dependent photothermal measurement of transverse thermal diffusivity of organic semiconductors

We have used a photothermal technique, in which chopped light heats the front surface of a small (∼1 mm{sup 2}) sample and the chopping frequency dependence of thermal radiation from the back surface is measured with a liquid-nitrogen-cooled infrared detector. In our system, the sample is placed directly in front of the detector within its dewar. Because the detector is also sensitive to some of the incident light, which leaks around or through the sample, measurements are made for the detector signal that is in quadrature with the chopped light. Results are presented for layered crystals of semiconducting 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pn) and for papers of cellulose nanofibrils coated with semiconducting poly(3,4-ethylene-dioxythiophene):poly(styrene-sulfonate) (NFC-PEDOT). For NFC-PEDOT, we have found that the transverse diffusivity, smaller than the in-plane value, varies inversely with thickness, suggesting that texturing of the papers varies with thickness. For TIPS-pn, we have found that the interlayer diffusivity is an order of magnitude larger than the in-plane value, consistent with previous estimates, suggesting that low-frequency optical phonons, presumably associated with librations in the TIPS side groups, carry most of the heat.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of contacts on charge collection in an Au/CdTe/Au detector: A Simulation

We report our simulations on the influence of contacts on charge collection in semi-insulating (CdZn)Te with Au contacts under radiation flux, employing simultaneous solutions of the drift-diffusion and Poisson equations. The type of the space charge and the distribution of the electric field in the Au/(CdZn)Te/Au structure at high fluxes reflect the combined influence of charge generated by band bending at the electrodes, and from photogenerated carriers trapped at deep levels. We show that the space charge originating from the latter approaches dominance at high fluxes while the influence of the contacts becomes negligible. The ratio of trapping and collection times at low fluxes strongly depends on band bending, due mainly to a change in the occupation of deep levels by injection or depletion from the contacts. Such dependence is weak at high fluxes; in this case, the space charge due to trapped carriers prevails over that formed due to band bending. These phenomena can cause the formation an electric-field minimum within the device (the pinch point), the position of which is influenced by the nature of the contacts. The field minimum can completely disappear or develop into a dead layer as band bending changes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cosmic-ray transport in the galactic magnetosphere

It is advantageous to regard cosmic rays as the constitutent particles of the Galactic radiation belts and cosmic ray energization as a consequence of inward radial diffusion in the quasi-dipolar Galactic magnetosphere. This process occurs in addition to Fermi acceleration. The purpose of this work is to explore a magnetospheric explanation for the elevation of Galactic charged particles to cosmic ray energies. The magnetosphere that is of interest in this context is not a planetary magnetosphere but a galactic magnetosphere entirely analogous to those inferred from radio observations of distant galaxies. It is the magnetosphere of the Milky Way. Cosmic rays are (by this interpretation) the charged particles that constitute the radiation belts of the Galactic magnetosphere. Thus, the mechanism by which charged particles attain cosmic-ray energies is presumable the mechanism by which radiation-belt particles attain high energies in more familiar magnetosphere, i.e., the radial diffusion associated with magnetic disturbances that contain spectral power resonant with the azimuthal drift of the particles.

Schulz, M.↗

Radial transport of radiation belt electrons in kinetic field-line resonances

A representative case study from the Van Allen Probes during a geomagnetic storm recovery phase reveals enhanced electron fluxes at intermediate pitch angles over energies from ~100 keV to 5 MeV coincident with broadband low-frequency electromagnetic waves. The statistical properties of these waves are used to build a model for radial diffusion via drift-bounce resonances in kinetic Alfvén eigenmodes/kinetic field-line resonances. Estimated diffusion coefficients indicate timescales for radial transport on the order of hours in storm time events at energies from <100 keV to MeVs over equatorial pitch angles from the edge of the loss cone to nearly perpendicular to the geomagnetic field. In conclusion, the correlation of kinetic resonances with electron depletions and enhancements during storm main phase and recovery, and the rapid diffusion these waves drive, suggests that they may modulate the outer radiation belt.

58 GEOSCIENCES↗

A numerical study on the effect of hydrogen/reformate gas addition on flame temperature and NO formation in strained methane/air diffusion flames

This paper investigates the effects of hydrogen/reformate gas addition on flame temperature and NO formation in strained methane/air diffusion flames by numerical simulation. The results reveal that flame temperature changes due to the combined effects of adiabatic temperature, fuel Lewis number and radiation heat loss, when hydrogen/reformate gas is added to the fuel of a methane/air diffusion flame. The effect of Lewis number causes the flame temperature to increase much faster than the corresponding adiabatic equilibrium temperature when hydrogen is added, and results in a qualitatively different variation from the adiabatic equilibrium temperature as reformate gas is added. At some conditions, the addition of hydrogen results in a super-adiabatic flame temperature. The addition of hydrogen/reformate gas causes NO formation to change because of the variations in flame temperature, structure and NO formation mechanism, and the effect becomes more significant with increasing strain rate. The addition of a small amount of hydrogen or reformate gas has little effect on NO formation at low strain rates, and results in an increase in NO formation at moderate or high strain rates. However, the addition of a large amount of hydrogen increases NO formation at all strain rates, except near pure hydrogen condition. Conversely, the addition of a large amount of reformate gas results in a reduction in NO formation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of gamma radiation on zircaloy-4 corrosion - 2016-0029

A key microstructural feature of irradiated oxide films that form on Zircaloy-4 is the development of significant amounts of interconnected porosity or microcracking, particularly along oxide grain boundaries. This development disrupts the protective nature of the barrier layer, effectively resulting in an increase in the observed post-transition corrosion rates. This observation suggests that some aspect of oxide dissolution may be occurring. It is noteworthy that when exposed to photons with energies greater than that of the oxide band gap, n-type semiconducting oxides are prone to dissolution. Because zirconia (ZrO{sub 2}) is an n-type semiconductor, it is plausible that high-energy photons may play an important role in corrosion. In an operating nuclear reactor, neutron and gamma flux levels are closely interrelated because they arise, for the most part, from the same originating process (i.e., the fissioning of nuclear fuel). Thus, it is difficult to isolate the independent effects of neutron and gamma radiation on corrosion. It is, however, theoretically conceivable to assess the role that gamma radiation may have on corrosion by comparing instances where variations in radiation environment exists; specifically by comparing where variations in gamma flux levels relative to neutron flux levels within different regions of a reactor or from reactor to reactor exist. Comparisons of the corrosion rates obtained between two different reactors (the Halden test reactor and the advanced test reactor [ATR]) that have differing gamma-to-neutron ratios were performed. In addition, an examination of corrosion rate data from the ATR, in which a variation in gamma-to-neutron flux ratio exists, was also conducted. Results are presented, from both assessments, which indicate that gamma radiation plays a role in the irradiated corrosion behavior of Zircaloy-4. In addition to a discussion of experimental data, potential mechanisms associated with photon-induced oxide dissolution of n-type semiconducting oxides, such as zirconia, is also provided. (authors)

36 MATERIALS SCIENCE↗

Overview of Methods for Deriving the Radiative Transfer Theory from the Maxwell Equations. I: Approach Based on the Far-Field Foldy Equations

In this paper, we revisit, with further enhancements and clarifications, the self-consistent first-principles approach developed previously for deriving the vector radiative transfer theory for a discrete random medium with a sparse concentration of particles. We specifically consider the case of a plane-parallel particulate layer embedded in an otherwise homogeneous unbounded medium. The solution method is based on the far-field Foldy equations, an order-of-scattering expansion for the total field derived under the Twersky approximation, the computation of the coherent field by assuming that the positions of the particles are uncorrelated, and the ladder approximation for the coherency dyadic. The latter yields an integral equation for the diffuse specific coherency dyadic, defined through an angular spectrum repre- sentation for the coherency dyadic, which in turn, gives the vector radiative transfer equation for the diffuse specific intensity column vector. We analyze specifically the computation of the coherent field for inhomogeneous particulate media and multiple species of particles, the continuous extension of the far-field representation to the near field, the Foldy approximation, and the Foldy integral equation for the coherent field. Finally, we discuss the transition from the vector to the scalar radiative transfer equation.

Doicu, Adrian↗

GALACTIC MAGNETIC FIELDS AND THE LARGE-SCALE ANISOTROPY AT MILAGRO

The air-shower observatory Milagro has detected a large-scale anisotropy of unknown origin in the flux of TeV cosmic rays. We propose that this anisotropy is caused by galactic magnetic fields and, in particular, that it results from the combined effects of the regular and the turbulent (fluctuating) magnetic fields in our vicinity. Instead of a diffusion equation, we integrate Boltzmann's equation to show that the turbulence may define a preferred direction in the cosmic ray propagation that is orthogonal to the local regular magnetic field. The approximate dipole anisotropy that we obtain explains Milagro's data well.

79 ASTRONOMY AND ASTROPHYSICS↗

Response of an interactive two-dimensional model to ozone changes - An estimate of the radiative dynamical feedback effect

The response of the interactive two-dimensional stratospheric model described by Schneider et al. (1989) to an increased chemical removal of ozone and the sensitivity of the calculated assessments to the choice of eddy diffusion coefficients are investigated using a simplified ozone chemistry model. It was found that the radiative dynamical feedback in the model leads to ozone losses at high altitudes to be about one third smaller than predicted by a model with fixed temperature and circulation. The radiative feedback has a smaller effect on ozone (losses decrease by about one sixth) in the lower stratosphere. Predicted ozone losses increase with decreasing dissipation and eddy diffusion in the lower stratosphere.

Schneider, Hans R.↗

Modeling the low-altitude trapped radiation environment

The predictions of models of trapped energetic particle radiation at low altitudes, including the NASA trapped radiation models, are compared with low altitude measurements of energetic protons and electrons. Knowledge of the trapped energetic particle radiation at low altitudes in the vicinity of the south Atlantic magnetic anomaly is considered to be important for the analysis of the space environmental effects on space systems in this region. The long term trends in the observations are generally consistent with the NASA trapped radiation models. The discrepancies between the models and observations are currently being investigated using a 3D diffusive model and realistic atmospheric and magnetic field models. The requirements for future work and development of low altitude trapped radiation environment models are discussed.

Fung, Shing F.↗

Small-scale primordial magnetic fields and anisotropies in the cosmic microwave background radiation

It is shown that small-scale magnetic fields present before recombination induce baryonic density inhomogeneities of appreciable magnitude. The presence of such inhomogeneities changes the ionization history of the Universe, which in turn decreases the angular scale of the Doppler peaks and increases Silk damping by photon diffusion. This unique signature could be used to (dis)prove the existence of primordial magnetic fields of strength as small as B ≅ 10{sup −11} Gauss by cosmic microwave background observations.

79 ASTRONOMY AND ASTROPHYSICS↗

A general method for computing the total solar radiation force on complex spacecraft structures

The method circumvents many of the existing difficulties in computational logic presently encountered in the direct analytical or numerical evaluation of the appropriate surface integral. It may be applied to complex spacecraft structures for computing the total force arising from either specular or diffuse reflection or even from non-Lambertian reflection and re-radiation.

Chan, F. K.↗

Assessing impacts of canopy 3D structure on chlorophyll fluorescence radiance and radiative budget of deciduous forest stands using DART

Although remote sensing (RS) of solar-induced chlorophyll fluorescence (SIF) is increasingly used as a valuable source of information about vegetation photosynthetic activity, the RS SIF observations are significantly influenced by canopy-specific structural features (i.e., canopy architecture including leaf area index and presence of woody components), atmospheric conditions during their acquisition (e.g., proportion of direct and diffuse irradiance) and observational geometric configurations (e.g., sun and viewing directions). Radiative transfer (RT) models have the potential to provide a better understanding of the canopy structural effects on the SIF emission and RS signals. Here, we used the DART model to assess the daily influence, from morning to evening, of forest 3D architecture on SIF nadir radiance, emission, escape factor and nadir yield of eight 100 m × 100 m forest study plots established in a temperate deciduous forest of the Smithsonian Environmental Research Center (Edgewater, MD, USA). The 3D architecture of each plot was derived from airborne LiDAR. DART simulations of these 3D forest plots and their 1D (i.e., vertical profile of sun-adapted and shade-adapted leaves) and 0D (i.e., homogeneous layer of sun-adapted leaves above an homogeneous layer of shade-adapted leaves) abstractions were compared to assess the relative errors (ε1D−3D and ε0D−3D) associated with horizontal and vertical structural heterogeneity, respectively. Forest 3D structure, especially horizontal heterogeneity, had a great influence on forest nadir SIF radiance, resulting in ε1D−3D up to 55% at 8:00 and 18:00 (i.e., for oblique sun directions). The key indicators of this impact, in the descending order of importance, were the SIF escape factor (ε1D−3D up to 40%), the attenuation of incident photosynthetically active radiation (ε1D−3D less than 5%), and the SIF emission yield (ε1D−3D less than 2%). The influence of forest architecture on the nadir SIF escape factor and SIF yield (ε1D−3D up to 40%) varied over time, with differences in forest stand structure, and per spectral domain, being always larger between 640 and 700 nm than between 700 and 850 nm. In addition, woody elements demonstrated a large influence on forest SIF radiance due to their “shading” effect (ε up to 17%) and their “blocking” effect (ε ≈ 10%), both of them higher for far-red than for red SIF. These results underline the importance of 3D forest canopy architecture, especially 2D heterogeneity, and inclusion of woody elements in RT modeling used for interpretation of the RS SIF signal, and subsequently for the estimation of gross primary production and detection of vegetation stress.

Omar Regaieg↗

Direct numerical simulation of temporally evolving luminous jet flames with detailed fuel and soot chemistry

Direct numerical simulations of 2D temporally-evolving luminous turbulent ethylene-air jet diffusion flames are performed using a high-order compressible Navier-Stokes solver. The simulations use a reduced mechanism derived from a detailed ethylene-air chemical kinetic mechanism that includes the reaction pathways for the formation of polycyclic aromatic hydrocarbons. The gas-phase chemistry is coupled with a detailed soot particle model based on the method of moments with interpolative closure that accounts for soot nucleation, coagulation, surface growth through HACA mechanism, and oxidation. Radiative heat transfer of CO{sub 2}, H{sub 2}O, and soot is treated by solving the radiative transfer equation using the discrete transfer method. This work presents preliminary results of radiation effects on soot dynamics at the tip of a jet diffusion flame with a particular focus on soot formation/oxidation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hydrogen decoration of radiation damage induced defect structures

The defect complexes that are formed when protons with energies in the MeV-range were implanted into high-purity silicon were investigated. After implantation, the samples were annealed at 400 °C or 450 °C for times ranging between 15 minutes and 30 hours. The resistivity of the samples was then analyzed by Spreading Resistance Profiling (SRP). The resistivity shows minima where there is a high carrier concentration and it is possible to extract the carrier concentration from the resistivity data. Initially, there is a large peak in the carrier concentration at the implantation depth where most of the hydrogen is concentrated. For longer anneals, this peak widens as the hydrogen diffuses away from the implantation depth. Following the changes in resistivity as a function of annealing time allows us to characterize the diffusion of hydrogen through these samples. Differences in the diffusion were observed depending on whether the silicon was grown by the magnetic Czochralski (m:Cz) method or the Float zone (Fz) method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refine your search to explore more results.