Search NASA⌕ Search

SEARCH · Search NASA

Results for “Edge Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Which Stars Are Ionizing the Orion Nebula?

The common assumption that θ{sup 1} Ori C is the dominant ionizing source for the Orion Nebula is critically examined. This assumption underlies much of the existing analysis of the nebula. In this paper we establish through comparison of the relative strengths of emission lines with expectations from Cloudy models and through the direction of the bright edges of proplyds that θ{sup 2} Ori A, which lies beyond the Bright Bar, also plays an important role. θ{sup 1} Ori C does dominate ionization in the inner part of the Orion Nebula, but outside of the Bright Bar as far as the southeast boundary of the Extended Orion Nebula, θ{sup 2} Ori A is the dominant source. In addition to identifying the ionizing star in sample regions, we were able to locate those portions of the nebula in 3D. This analysis illustrates the power of MUSE spectral imaging observations to identify sources of ionization in extended regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Polarization of the auroral electrojet.

Consideration of an idealized model of electrojet polarization. Precipitation from the inner edge of the electron plasma sheet creates a density maximum in the auroral-oval ionosphere, which in turn leads to Hall and Pedersen conductance maximums. It is then assumed that a uniform westward convection electric field is imposed on the lower ionosphere before polarization. Field-aligned currents must flow into the ionosphere equatorward and out of the ionosphere poleward of the Hall conductance maximum. As the convection field and ionospheric density increase during the substorm growth phase, the field-aligned current densities should eventually reach an instability threshold beyond which anomalous resistance should produce field-aligned electric fields. The partial blockage of the field-aligned currents produces an equatorward electric field and therefore a partial Cowling conductivity in the lower ionosphere. Rough numerical estimates indicate that the expected field-aligned currents can exceed the stability threshold estimated by Kindel and Kennel (1971), that 1- to 5-kV field-aligned potential drops correspond to significant electrojet enhancement, and that the required energy dissipation of field-aligned currents in the topside ionosphere, a few ergs/per sq cm per sec column, suggests significant topside modification following auroral breakup.

Coroniti, F. V.↗

Polarized electromagnetic response of the moon

The strong anisotropy in Apollo 15 Lunar Surface Magnetometer (LSM) signals resulting from electromagnetic induction in the moon, forced by fluctuations of the interplanetary magnetic field, is shown to result from intense polarization of the induced field. Arguments are given to show that the anisotropy cannot be explained wholly by asymmetric lunar induction in the presence of the diamagnetic cavity, but must be related to a regional influence. The weaker Apollo 12 anisotropy may also be associated with a regional influence. The site of Apollo 15 LSM at the edge of the Imbrium Basin suggests a preliminary model for calculations based on the possibility that Imbrium and perhaps Serenitatis are sources of the regional effect. Lastly, since the very low frequency induction seems free of the anisotropy, our earlier estimate of deep conductivity remains unchanged.

Sonett, C. P.↗

H alpha observations of the 12 August 1975 type 3-RS bursts

H alpha filtergram observations of a number of the Type III-RS (reverse slope) bursts that occurred on August 12, 1975 are presented. Solar radio emission was peculiar on that date in that a large number, and proportion, of the usually rare reverse slope bursts were observed. The radio bursts are shown to coincide in time with a homologous set of H alpha flares located at the limbward edge of spot group Mt. Wilson 19598. A model is proposed in which the reverse slope bursts are the downward branches of U bursts, whose upward branches are hidden behind the coronal density enhancement over the spot group.

Labonte, B. J.↗

Purging of a multilayer insulation with dacron tuft spacer by gas diffusion

The time and purge gas usage required to purge a multilayer insulation (MLI) panel with gaseous helium by means of gas diffusion to obtain a condensable gas (nitrogen) concentration of less than 1 percent within the panel are stipulated. Two different, flat, rectangular MLI panels, one incorporating a butt joint, were constructed of of 11 double-aluminized Mylar (DAM) radiation shields separated by Dacron tuft spacers. The DAM/Dacron tuft concept is known commercially as Superfloc. The nitrogen gas concentration as a function of time within the MLI panel could be adequately predicted by using a simple, one dimensional gas diffusion model in which the boundary conditions at the edge of the MLI panel were time dependent. The time and purge gas usage required to achieve 1 percent nitrogen gas concentration within the MLI panel varied from 208 to 86 minutes and 34.1 to 56.5 MLI panel purge volumes, respectively, for gaseous helium purge rates from 10 to 40 MLI panel volumes per hour.

Sumner, I. E.↗

Airframe noise measurements on a small-scale model of a supersonic transport concept in an anechoic flow facility

Airframe noise has been measured on a .015 scale model of an advanced supersonic transport concept (AST-100) in an anechoic flow facility. The model was equipped with leading- and trailing-edge flaps, nose and main landing gears, and engine nacelles. Each of these components was deployed, individually and collectively, to determine their contribution to the noise field. Results are presented which show that in the clean configuration the aircraft displays a symmetric dipole directivity, whereas in the more complex landing-approach configuration the directivity peaks in the forward quadrant. It was found that the landing-approach noise was due chiefly to the landing gear, the trailing edge flaps, and the aeroacoustic interaction between the two

Preisser, J. S.↗

Computer program for nonlinear static stress analysis of shuttle thermal protection system: User's manual

User documentation is presented for a computer program which considers the nonlinear properties of the strain isolator pad (SIP) in the static stress analysis of the shuttle thermal protection system. This program is generalized to handle an arbitrary SIP footprint including cutouts for instrumentation and filler bar. Multiple SIP surfaces are defined to model tiles in unique locations such as leading edges, intersections, and penetrations. The nonlinearity of the SIP is characterized by experimental stress displacement data for both normal and shear behavior. Stresses in the SIP are calculated using a Newton iteration procedure to determine the six rigid body displacements of the tile which develop reaction forces in the SIP to equilibrate the externally applied loads. This user documentation gives an overview of the analysis capabilities, a detailed description of required input data and an example to illustrate use of the program.

Giles, G. L.↗

Soft X-ray spectral variations in Scorpius X-1

Soft X-ray spectra of Scorpius X-1 obtained with the low-energy detectors of the A-2 experiment on HEAO 1 are presented. The raw count spectra are deconvolved using the Kahn and Blissett technique to reveal the presence of oxygen absorption in the range 0.5-0.7 keV. The strength of this feature is shown to vary on a time scale of order hours. These results are interpreted as evidence for variable X-ray photoionization of circumsource material in the system. An alternative model, involving variable Compton broadening of an oxygen edge, is also discussed.

Kahn, S. M.↗

Quasi-steady solar wind dynamics

Progress in understanding the large scale dynamics of quasisteady, corotating solar wind structure was reviewed. The nature of the solar wind at large heliocentric distances preliminary calculations from a 2-D MHD model are used to demonstrate theoretical expectations of corotating structure out to 30 AU. It is found that the forward and reverse shocks from adjacent CIR's begin to interact at about 10 AU, producing new shock pairs flanking secondary CIR's. These sawtooth secondary CIR's interact again at about 20 AU and survive as visible entities to 30 AU. The model predicts the velocity jumps at the leading edge of the secondary CIR's at 30 AU should be very small but there should still be sizable variations in the thermodynamic and magnetic parameters. The driving dynamic mechanism in the distant solar wind is the relaxation of pressure gradients. The second topic is the influence of weak, nonimpulsive time dependence in quasisteady dynamics. It is suggested that modest large scale variations in the coronal flow speed on periods of several hours to a day may be responsible for many of the remaining discrepancies between theory and observation. Effects offer a ready explanation for the apparent rounding of stream fronts between 0.3 and 1.0 AU discovered by Helios.

Pizzo, V. J.↗

Pressure distribution data from tests of 2.29-meter (7.5-ft.) span EET high-lift research model in Langley 4- by 7-meter tunnel

A 2.29 m (7.5 ft.) span high-lift research model equipped with full-span leading-edge slat and part-span double-slotted trailing-edge flap was tested in the Langley 4- by 7-Meter Tunnel to determine the low speed performance characteristics of a representative high aspect ratio suprcritical wing. These tests were performed in support of the Energy Efficient Transport (EET) program which is one element of the Aircraft Energy Efficiency (ACEE) project. Static longitudinal forces and moments and chordwise pressure distributions at three spanwise stations were measured for cruise, climb, two take-off flap, and two landing flap wing configurations. The tabulated and plotted pressure distribution data is presented without analysis or discussion.

Morgan, H. L., Jr.↗

Off-Design Performance of Radial-Inflow Turbines

Computer code determines rotor exit flow from hub to tip. RTOD (Radial Turbine Off-Design), computes off-design performance of radial turbine by modeling flow with stator viscous and trailing-edge losses, and with vaneless space loss between stator and rotor, and with rotor incidence, viscous, clearance, trailing-edge, and disk friction losses.

Meitner, P. L.↗

Pressure distribution data from tests of 2.29 M (7.5 feet) span EET high-lift transport aircraft model in the Ames 12-foot pressure tunnel

A high-lift transport aircraft model equipped with full-span leading-edge slat and part-span double-slotted trailing-edge flap was tested in the Ames 12-ft pressure tunnel to determine the low-speed performance characteristics of a representative high-aspect-ratio supercritical wing. These tests were performed in support of the Energy Efficient Transport (EET) program which is one element of the Aircraft Energy Efficiency (ACEE) project. Static longitudinal forces and moments and chordwise pressure distributions at three spanwise stations were measured for cruise, climb, two take-off flap, and two landing flap wing configurations. The tabulated and plotted pressure distribution data is presented without analysis or discussion.

Kjelgaard, S. O.↗

Characteristics of merging shear layers and turbulent wakes of a multi-element airfoil

Flow characteristics in the vicinity of the trailing edge of a single-slotted airfoil flap are presented and analyzed. The experimental arrangement consisted of a NACA 4412 airfoil equipped with a NACA 4415 flap whose angle of deflection was 21.8 deg. The flow remained attached over the model surfaces except in the vicinity of the flap trailing edge where a small region of boundary-layer separation extended over the aft 7 percent of flap chord. The flow was complicated by the presence of a strong, initially inviscid jet emanating from the slot between airfoil and flap, and a gradual merging of the main airfoil wake and flap suction-side boundary layer. Downstream of the flap, the airfoil and flap wakes fully merged to form an asymmetrical curved wake. The airfoil configuration was tested at an angle of attack of 8.2 deg, at a Mach number of 0.09, and a chord based Reynolds number of 1.8 x 10 to the 6th power in the Ames Research Center 7- by 10-Foot Wind Tunnel. Surface pressure measurements were made on the airfoil and flap and on the wind tunnel roof and floor. It was estimated that the wall interference increased the C sub L by 7 percent and decreased the C sub M by 4.5 percent. Velocity characteristics were quantified using hot-wire anemometry in regions of flow with preferred direction and low turbulence intensity. A 3-D laser velocimeter was used in regions of flow recirculation and relatively high turbulence intensity.

Adair, Desmond↗

An automated computerized vision technique for determination of three-dimensional object geometry

It is very important to determine three dimensional geometry of objects quickly in various military, space, construction, and industrial applications. An automatic scheme to obtain three dimensional geometry of objects by employing only one camera is presented. At present, this technique is applicable to a limited category of objects, satisfying the following constraints: they are flat-surfaces, and all the vertex points have to be recognized as corner points of the two dimensional image. The scheme consists of corner detection, data communication, camera calibration techniques and point searching and matching, edge cancelation, and creation procedures. An L shaped model is chosen as a test object. Experimental results demonstrated the reconstruction of this object geometry within 5 mm discrepancy. This scheme is quite convenient, efficient to use and can be applied to a wide range of problems in the real world.

Chiang, Pen-Tai↗

An ideal clamping analysis for a cross-ply laminate

Different elementary clamping models are discussed for a three layer crossply laminate to study the sensitivity of clamping to the definition of cross-sectional rotation. All of these models leave a considerable residual warping at the edges. Using a complimentary energy principle and principle of superposition, an analysis is conducted to reduce this residual warping. This led to the identification of exact interior solution corresponding to the ideal clamping. This study also suggests a presence of stress singularities at the corners and between different layers near the fixed edge.

Valisetty, R. R.↗

Thermal analysis of thermal barrier coatings in a high heat flux environment

Gas temperatures and pressures were measured around the second test position in the H2/O2 rocket engine at NASA-Lewis. Measured gas temperatures generally varied from 1210 to 1390 C. Measured pressures were in good agreement with other studies for throat tubes in a square chamber rocket engine. Heat transfer coefficients were measured at 90 and 180 degrees from the stagnation point and resulted in values of 27.5 and 8.5 kW/sq m C, respectively. A thermal model was developed to predict temperatures in bare and coated tubes and rods. Agreement between measured and predicted temperatures below the surface of a bare Mar-M 246 tube was very good for most of the heat up and cool down period. Predicted temperatures were significantly below measured temperatures for the coated tubes. A thermal model to simulate heat transfer to the leading edge of an HPFTP blade was developed and showed that TBCs can significantly dampen the thermal transient which occurs in the HPFTP during the startup of the SSME.

Nesbitt, James A.↗

Lower hybrid drift instability at the inner edge of the ring current

Excitation of electrostatic waves around and above the lower hybrid frequency at the inner edge of the ring current is investigated. The model consists of cold plasmaspheric ions; hot, dilute, inhomogeneous ring current ions; and cold charge neutralizing electrons. It is shown that in the presence of a sufficiently large density gradient the coupling of the lower hybrid with the drift cyclotron harmonic mode destabilizes the plasma. Unstable interactions also occur at higher cyclotron harmonics when the lower hybrid is replaced by an ion Bernstein mode. Additional power at frequencies above the lower hybrid frequency is attributed to the thermal enhancement by the hot ring current ions, which increases with their density gradient. Particle simulations are conducted, and comparison to AMPTE data is discussed.

Roth, I.↗

Tests on a sodium/Hastelloy X wing leading edge heat pipe for hypersonic vehicles

A full-scale, internally instrumented, sodium/Hastelloy X heat pipe was designed and fabricated for the wing leading edge of an advanced reentry vehicle. A computer model was developed to predict the heat pipe startup. The heat pipe was tested, and the results were used to validate the startup methodologies. In addition, valuable fabrication and test procedure lessons were learned.

Boman, B. L.↗

Refine your search to explore more results.