Search NASA⌕ Search

SEARCH · Search NASA

Results for “FRACTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Evolution of Induced Fracture Networks Using Machine Learning Correlation Image Analysis

Enhanced geothermal systems (EGS) can enrich the Nation’s energy portfolio by increasing the amount of renewable baseload power available to the electrical grid. Microseismic activity, due to fluid resource injection and production, provides critical insight into the processes that occur within EGS subsurface fracture networks. To more precisely characterize these fracture networks, we leverage recent advances in deep neural network (DNN) image analysis techniques. Using seismic spectrogram data collected during a meso scale EGS field experiment as image inputs, we developed a new approach to correlate microseismic events. Our results indicate that our chosen DNN is able to estimate the correlation value between highly correlated events (i.e., cross-correlation coefficients greater than approximately 0.7), but has difficulty estimating correlation values between poorly correlated events. In physical systems however, the highly correlated microseismic events are the events of interest. Therefore, this data-driven method has shown potential for improving domestic Energy and Resource Security, advancing the current methods available to image subsurface EGS thermal reservoirs to enhance the availability of clean and reliable energy to the national electric grid.

58 GEOSCIENCES↗
DOE OSTI2019

Fracture Toughness Properties of Tritium Charged and Aged Stainless Steels: SRNL and SNL Collaboration Test Plan and 2018 Results

Forged stainless steels are used as the materials of construction for tritium reservoirs. During service, tritium diffuses into the reservoir walls and radioactively decays to helium-3. Tritium and decay helium cause a higher propensity for cracking which could lead to a tritium leak or failure of a tritium reservoir. Fracture toughness properties are needed for designing tritium reservoirs and evaluating the long-term effects of tritium on their structural properties. A key result of prior studies is that the long-term cracking resistance of stainless steels in tritium service depends greatly on the interaction between decay helium and the steels’ forged microstructure. Designers and modelers at Sandia National Laboratories (SNL) have identified key gaps in the data available on material performance in tritium. Thus, a collaborative plan and schedule of tests have been developed with SRNL and SNL to fill these gaps using a range of tensile test and fracture mechanics test geometries, at stockpile relevant temperatures. These studies target the fundamental deformation mechanisms and the influence of tritium-decay-helium on their behavior. This report outlines the goals of each program and describes the sample test matrices and experimental conditions. This report fulfills the requirements for a portion of the Enhanced Surveillance Campaign (ESC) FY19 Level 2 milestone 6725 to deliver an annual report on the aging studies of reservoir materials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Ductile Fracture - Gradient Regularization

Nuclear weapons alteration (ALT) and life extension programs (LEP) are of primary interest to the mission of Sandia National Laboratories. These programs continue to require experimental exploration and computational simulation of ductile failure scenarios to address qualification. Therefore, we invest in generating understanding about ductile failure as demonstrated though experimental procedures and computational simulation of engineering environments. In particular, we study an approach to ductile failure that incorporates the notion of phase-field fracture into our models of inelasticity appropriate for structural alloys. This report covers the formulations of the constitutive model and fracture models used within the phase-field approach and provides some numerical examples highlighting features and the state of the capability.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Potential Formation Damage: An Integrated Reservoir Characterization Study of the Naturally Fractured Carbonate Middle Duperow Formation at the Kevin Dome, Montana

In this study, we integrate geologic and engineering data of a naturally fractured carbonate reservoir at the Kevin Dome, Montana. Well test data are correlated with core description, geochemical and lithology study to determine the flow behavior and communication within the injection test interval and to the surrounding area. Based on a dual-continuum geologic model, numerical brine injection simulations are carried out to validate the interpretation results from our well test analytical models and forecast the probability of CO 2 injection success using current reservoir properties. As a result, our well test analytical models as well as lithology/core description suggest that fluid flow may be mainly restricted to the injection interval and the assumption of radial (horizontal) flow may be appropriate. The well test models also indicate that there is potentially formation damage with a positive skin factor although prior to brine injection well tests, well stimulation through acid treatment was performed. Our numerical simulation results appear to confirm this formation damage by showing additional pressure buildup in the injection data during later test periods. To explain this, acid may have dissolved dolomite then dolomite or calcite may have been formed again further into the matrix/fracture system. Another possible explanation is mechanical clogging of the fractures due to acid dissolving dolomite and dislodging fine grains. Our work also predicts that if no additional well stimulation is performed, the project will have a lower probability of successfully injecting 1 million tons of CO 2 into the Middle Duperow formation over 4 years.

42 ENGINEERING↗
DOE OSTI2018

Deformation and Fracture in Complex-Shaped Energetic Particles

A new technical basis on the mechanics of energetic materials at the individual particle scale has been developed. Despite these particles being in most of our Sandia non-nuclear explosive components, we have historically lacked any understanding of particle behavior. Through the novel application of nanoidentation methods to single crystal films and single particles of energetic materials with complex shapes, discovery data has been collected elucidating phenomena of particle strength, elastic and plastic deformation, and fracture. This work specifically developed the experimental techniques and analysis methodologies to distill data into relationships suitable for future integration into particle level simulations of particle reassembly. This project utilized experimental facilities at CINT and the Explosive Components Facility to perform ex-situ and in-situ nanoidentation experiments with simultaneous scanning electron microscope (SEM) imaging. Data collected by an applied axial compressive load in either force-control or displacement-control was well represented by Hertzian contact theory for linear elastic materials. Particle fracture phenomenology was effectively modeled by an empirical damage model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Rock Fracturing Using High-Pressure Ethylene/Nitrous Oxide Detonations

The present work investigates high initial pressure detonations of a stoichiometric mixture of ethylene and nitrous oxide (C2H4 + 6N2O) as a method of fracturing rock beneath the ground surface. These tests were conducted at a test site operated by the Energetic Materials Research and Testing Center (EMRTC), Socorro, New Mexico. The volume under the surface used for testing (called the Down Hole Assembly) consists of a 0.438 in. ID x 50 ft. long stainless-steel tube running down from the test site to a well bore which is 3 in. ID x 10 ft. long and the rock in the well bore is exposed to the propagating combustion wave. The testing carried out at Zucrow Laboratories in the smaller, alloy steel combustion vessel provided a scaling of pressures expected in the well bore. The combustion is initiated by energizing an EBW (Exploding Bridge Wire) above the ground surface. The experimental setup accommodates one high pressure (100,000 psia) transducer to measure the pressure peak and is placed approximately 5 ft. above the ground surface and 5 ft. downstream of the EBW. The focus of this series of experiments is to investigate the dependence of fracture to the rock beneath the surface on initial pressures of the mixture of ethylene and nitrous oxide. Experiments were carried out at initial pressures varying between 125 psia and 300 psi. The transducer recorded elevated pressures, which were 2.3 to 2.6 times in excess of the CJ values. The experimental results are discussed and explained in this report.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fracture Strength Determination Methods for Ceramic Materials Applied to Uranium Dioxide

The Advanced Fuels Campaign is currently focusing on development of accident-tolerant fuels that possess a range of property modifications intended to improve fuel performance during accident and transient conditions as well as extend license limits to burnups beyond 62 MWd/kgU. Both of these drivers have identified understanding and mitigating fuel cracking as a key performance criterion. Small-scale cantilever beam testing has been identified as a plausible method by which to collect fracture data for UO 2 as a function of chemical and structural evolutions introduced either during fabrication or irradiation. While this method has been found to be capable of providing data that are in reasonable agreement with literature for unirradiated UO 2 , the inherently small sample volumes that can be sampled limit its ability to capture the statistical nature of mechanisms that govern the fracture of brittle ceramics. A biaxial flexure strength test was developed to be used for unirradiated UO 2 . This method is standard in the community, but no systems presently in use at national laboratories, universities, or private companies are available to be used for nuclear fuel materials. This report describes the operation and benchmarking of this system, which has been validated for a number of common oxides. Future work will extend this system to characterization of both doped UO 2 and other relevant microstructural modifications that can also be measured using small-scale cantilever beam testing. Comparison of datasets collected using both methods will allow the overall applicability of small-scale techniques to be assessed and provide confidence or bounds on their use for irradiated fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

The Fracture Toughness of Nuclear Graphite Grades, Revision 1

New measurements of graphite mode I critical stress intensity factor, K Ic (commonly referred to as the fracture toughness) and the mode II critical shear stress intensity, K IIc , are reported and compared with prior data for K Ic and K IIc . The new data are for graphite grades PCEA, IG-110 and 2114. Variations of K Ic and acoustic emission (AE) data with graphite texture are reported and discussed. The Codes and Standards applications of fracture toughness, K Ic , data are also discussed. A specified minimum value for nuclear graphite K Ic is recommended.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Computational Analysis of Coupled Geoscience Processes in Fractured and Deformable Media

Prediction of flow, transport, and deformation in fractured and porous media is critical to improving our scientific understanding of coupled thermal-hydrological-mechanical processes related to subsurface energy storage and recovery, nonproliferation, and nuclear waste storage. Especially, earth rock response to changes in pressure and stress has remained a critically challenging task. In this work, we advance computational capabilities for coupled processes in fractured and porous media using Sandia Sierra Multiphysics software through verification and validation problems such as poro-elasticity, elasto-plasticity and thermo-poroelasticity. We apply Sierra software for geologic carbon storage, fluid injection/extraction, and enhanced geothermal systems. We also significantly improve machine learning approaches through latent space and self-supervised learning. Additionally, we develop new experimental technique for evaluating dynamics of compacted soils at an intermediate scale. Overall, this project will enable us to systematically measure and control the earth system response to changes in stress and pressure due to subsurface energy activities.

58 GEOSCIENCES↗
DOE OSTI2023

Fracture [Slides]

The Hemisphere provides a very useful platform for understanding bi-axial strain performance under dynamic loading conditions. The fragments maintain a hemispherical surface; combined with other diagnostics, this permits estimation of strain-to-fracture (even though the radiograph is taken after fracture).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interlaminar Fracture Toughness Testing of Nb3Sn Insulation Systems

Epoxy cracking has been the main suspected contributor to training in Nb3Sn magnets for some time, as it leads to energy release and magnet quenching. Cracking in a superconducting composite can occur from several modes, and the likelihood of these modes is not well understood. Failure has been observed between insulation systems and the superconducting cable itself rather than within the cable or insulation. To target the behavior at the interface, samples have been fabricated and tested for mode I fracture toughness in an adapted version of ASTM D5528. This work seeks to better characterize the fracture toughness of this interface to better understand how to model and design insulation systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Machine Learning Application for CCUS and Fracture Analysis

This is an invited guest speaker's presentation. The present covers three use cases by applying machine learning techniques. The use cases include fracture analysis for CCUS: IBDP study, multiple level of fracture network analysis and tool: HFTS1 study, Frac-Hit with Middleland Basin datasets from collaborations with Company A.

Liu, Guoxiang↗
DOE OSTI2025

Intrabasin Comparison of the Microbiology and Geochemistry of Produced Fluid From Hydraulically Fractured Wells in the Permian Region

The Permian Basin is the highest producing oil reservoir in the United States. Hydrocarbon extraction methods in this region are often associated with frac hits, or interwell communication events where an established well is affected by the pumping of fracture fluid into a new well. Our previous work revealed a geochemical signal indicating the presence of frac hits in the Permian Basin. We returned to this area with the goal of expanding our understanding of subsurface interactions common in this region. To do so, we collected produced water from 25 unique sites across the Permian Basin, 10 of which had previously been characterized during an active frac hit. For each sample, we measured the pH, alkalinity, geochemistry, microbial load, and microbial community composition. Permian Basin produced water is characterized by higher sulfate and lower total dissolved solids (TDS) concentrations compared to other regions. Interestingly, wells impacted by frac hits have a geochemical profile that resembles that of fracture fluid, with both lowered sulfate and lowered TDS concentrations compared to unaffected wells. Due to the year-long recovery window between sample collection periods, we anticipate that all our data will be characterized by the typical high sulfate, low TDS concentrations.

geochemistry↗
DOE OSTI2024

Reactive-transport modeling of fracture flow to quantify the changes in flow pathways from matrix thermal contraction and mineral precipitation and dissolution; influence of grid resolution

A series of reactive-transport models of Enhanced Geothermal Systems (EGS) were constructed using the reactive transport code PFLOTRAN to examine the effect of matrix thermal contraction and mineral dissolution/precipitation on fracture flow in the context of grid cell size and model complexity. It was found that for thermal drawdown at production well, the impact of fracture zone grid cell size is negligible.

Gatz-Miller, Hannah Sarah↗
DOE OSTI2018

Fracture Resistance of Cast Stainless Steels after Thermal Aging for up to 10000 Hours

This work package, Cast Stainless Steel Aging, aims to achieve a comprehensive scientific understanding on the aging and failure phenomena in cast austenitic stainless steels (CASSs) using holistic experimental and modeling means and to provide a practical and science-based model to predict the degree of thermal degradation of CASS components in extended-term operations. The test materials in the project include four model CASSs (CF3, CF3M, CF8, and CF8M), four EPRI-provided CASSs (CF3, two CF8s, and CF8M), and two reference wrought materials (304L and 316L), which contain a wide variety of d-ferrite contents (2–33%). These materials have been thermally aged at two light water reactor (LWR)-relevant temperatures (290 and 330°C) and at two accelerated-aging temperatures (360 and 400°C) for up to three years. In the fiscal year, the fracture toughness testing and J-R curve calculation were completed for the ten CASS and wrought materials aged up to 10,000 hours. This report is to present the results of the static fracture (J-R) testing for the model and EPRI-provided CASS materials after thermal aging up to 10,000 hours. First, a new aging parameter (A) was defined to present the aging degradation of mechanical properties against the common variable. This definition is used to scale an aging time at a temperature to the effective aging time at a reference temperature based on Arrhenius equation, which is a rate theory equation for thermally activated mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fracture Analysis of Cohesive Zone Models for Modeling Residual Stress Induced Delamination in Composite Structures

A fracture study of coupon-scale composite cylinders with embedded defects was conducted with an objective to assess and validate a modeling approach using two available cohesive material models. The study included experimental and simulation evaluations of initiation of crack growth and progression. Interrupted thermal experiments used acoustic emissions monitoring to identify the onset of crack progression during each cooling interval and ultrasonic scanning provided images of defect growth. Verification, validation, and uncertainty quantification (VVUQ) processes were performed in the assessment of the simulation predicted temperature at which crack propagation begins (quantity of interest). The Sobol sensitivity analysis identified the hoop direction elastic modulus in the carbon fiber reinforced polymer (CFRP) plies as the most influential parameter for simulations using both cohesive models, accounting for at least 70% of the variation in the temperature at crack propagation. The UQ temperature range for the Tvergaard-Hutchinson model was higher (more conservative) than the experimental acoustic measurement indicators of crack progression, while the temperature range for the Thouless-Parmigiani model enveloped the experimental data points for the primary defect size of 0.75 x 1 in. The simulations could not capture the stable crack growth indicated in the experiments. This is likely due to the models’ inability to represent anisotropic fracture toughness attributed to the structure of the orthotropic fiber weave in a woven composite laminate.

42 ENGINEERING↗
DOE OSTI2026

Role of Fluid and Temperature in Fracture Mechanics and Coupled THMC Processes for Enhanced Geothermal Systems

The ability to sustain high energy extraction efficiency from Enhanced Geothermal Systems (EGS) is affected by the ability to measure, characterize, and predict the effect of different perturbations that arise from fluid injection rates, fluid temperature, and shut-in conditions on existing and stimulated fracture systems throughout a subsurface reservoir’s lifecycle. The difficulty arises from limited knowledge of the interaction of fluid and temperature driven fractures with frictional interfaces that govern local deformation and frictional behavior in the surrounding rock. Thermo-poro-mechanical coupled processes tend to dominate this interaction and strongly affect the permeability and local stress distributions that impact efficiency and prevent optimal stimulation conditions over multi-decadal time frames.

Pyrak-Nolte, Laura [Purdue Univ., West Lafayette, ↗

Refine your search to explore more results.