Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite Properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Focusing crystal polarimeter designed for X-ray polarimetry - Construction and performance

A method for the construction of a graphite crystal polarimeter designed for measuring linear polarization of X-ray continuum sources is described. The dependence of reflected intensity upon the polarization direction of the incident beam at Bragg angles of 45 deg is used to measure the polarization. The particular instrument described was designed for a satellite X-ray polarimeter. By using a focusing parabolic surface instead of a nonfocusing flat crystal, the signal-to-background ratio is improved by a factor of 30 as compared to a flat crystal polarimeter of the same effective area. The focusing properties of the reflector were tested both optically and with X-rays. The performance of the instrument as a polarimeter was tested with a continuum X-ray source of small polarization, which was independently measured by a single flat crystal polarimeter. The agreement between the two measurements is excellent, indicating that the instrument can measure polarizations as low as 0.3%.

Toraskar, J. R.↗

Design and construction of high-sensitivity, infrared bolometers for operation at 300 mK

The design and construction of 300-mK composite bolometers developed for millimeter-wave astronomical observations are described. Graphite fibers are used as the electrical leads for the thermistor to reduce the thermal conductance and heat capacity associated with the leads. A mechanical suspension made of Nylon fibers provides the required thermal conductance. Electrical noise equivalent powers below 1 x 10 exp -16 W/sq rt Hz have been achieved for detectors with thermal time constants of 11 ms. The detectors were installed in a millimeter-wave photometer and used to perform observations of the cosmic microwave background from a balloonborne platform. The flight performance was consistent with the measured laboratory properties.

Alsop, D. C.↗

Intelligent uranium fission converter for neutron production on the periphery of the nuclear reactor core (MARIA reactor in Swierk - Poland)

The multipurpose, high flux research reactor MARIA in Otwock - Swierk is an open-pool type, water and beryllium moderated and graphite reflected. There are two not occupied experimental H1 and H2 horizontal channels with complex of empty rooms beside them. Making use of these two channels is not in conflict with other research or commercial employing channels. They can work simultaneously, moreover commercial channels covers the cost of reactor working. Such conditions give beneficial possibility of creating epithermal neutron stand for researches in various field at the horizontal channel H2 of MARIA reactor (co-organization of research at H1 channel is additionally planned). At the front of experimental channels the neutron flux is strongly thermalized - neutrons with energies above 0.625 eV constitute only ∼2% of the total flux. This thermalized neutron flux will be used to achieve high flux of epithermal neutrons at the level of 2x10{sup 9} n cm{sup -2}s{sup -1} by uranium neutron converter (fast neutron production - conversion of reactor core thermal neutrons to fast neutrons - and then filtering, moderating and finally cutting of unwanted gamma radiation). The intelligent converter will be placed in the reactor pool, near the front of the H2 channel. It will replace one graphite block at the periphery of MARIA graphite reflector. The converter will consist of 20 fuel elements - low enriched uranium plates. A fuel plate will be a part which will measure 110 mm wide by 380 mm long and will consist of a thin layer of uranium sealed between two aluminium plates. These plates, once assembled, form the fuel element used in converter. The plates will be positioned vertically. There are several important requirements which should be taken into account at the converter design stage: -maximum efficiency of the converter for neutrons conversion, -cooling of the converter need to be integrated with the cooling circuit of the reactor pool and if needed equipped with self-cooling system (enhanced comparing to the cooling properties inherent with regular rector pool water flows), -proper cooling conditions can be ensured by an appropriate water flow, so the resistance to flow has to be optimised, -the requirement of the minimum resistance to water flow leads to the openwork design of the fuel element separator, which, on the other hand, has to be strong enough to ensure the needed strength for mechanical load due to the fuel weight and forces associated with the water flow, -the possibility of changing beam and flux qualities by rotating the converter or repositioning the converter plates by moving or replacing with another materials. In order to minimize the neutron activation of the fuel in the converter, the possibility was predicted to remove the converter and to replace it with an aluminium dummy for the time when the beam at the channel H2 is not used. This means that both, the converter and the dummy, have to be easily removable from the converter socket. There has to be also the place in the water pool, near the research stand or in technological pool, where the converter can be safely stored (this place have to be proper for operation with plates i.e. changing amount of plates). Thermal and neutron load of the fuel plates in the converter will be inhomogeneous. In order to equalize these loads, the converter should be designed in such way that it would be possible to change the order of fuel plates. Moreover replacing the amount of the plates gives the opportunity to obtain different fluxes of neutrons (quantitatively and qualitatively i.e. energetically). The project of the converter is based on Monte Carlo calculation concerning neutron production and on Computational Fluid Dynamics (CFD) i.e. modelling of converter for thermodynamical aspects. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Free vibrations of thin-walled semicircular graphite-epoxy composite frames

A detailed study is made of the effects of variations in lamination and material parameters of thin walled composite frames on their vibrational characteristics. The structures considered are semicircular thin walled frames with I and J sections. The flanges and webs of the frames are modelled by using 2-D shell and plate finite elements. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frames. The frequencies and modes predicted by the 2-D finite element model are compared with those obtained from experiments, as well as with the predictions of a 1-D thin walled beam finite element model. A detailed study is made of the sensitivity of the vibrational response to variations in the fiber orientation, material properties of the individual layers, and boundary conditions.

Noor, Ahmed K.↗

An Efficient Electrolytic Preparation of MAX-Phased Ti-Al-C

Large-scale deployment of MAX-phased Ti-Al-C with intriguing mechanical and physicochemical properties is significantly retarded by its harsh preparation conditions, in which costly precursors, high temperature and non-atmospheric pressure are generally imperative. We herein report an efficient electrolytic preparation of MAX-phased Ti-Al-C by direct electro-reduction of solid TiO{sub 2}-Al{sub 2}O{sub 3}-C in molten CaCl{sub 2} at 1223 K under normal pressure. Homogeneous layered Ti{sub 3}AlC{sub 2} with an oxygen content of 4300 ppm is prepared under a voltage of 3 V between the solid cathode and graphite anode for only 4 hours. The electro-reduction of TiO{sub 2}-Al{sub 2}O{sub 3}-C exhibits a much faster speed compared with the electrolysis employing TiO{sub 2}, TiO{sub 2}-C and TiO{sub 2}-Al{sub 2}O{sub 3} as the precursors. Time-dependent electrolysis indicates that TiC{sub x}O{sub y} is the main intermediate. The generation of refractory and highly conducting TiC{sub x}O{sub y} intermediate enhances the reduction. Density functional theory simulations show a weak affinity towards oxygen of the resulting Ti{sub 3}AlC{sub 2}, which is beneficial to fast and thorough deoxidation. The formation of a layered structure of Ti{sub 3}AlC{sub 2} is attributed to the template effect of the precursory graphite. By simply varying the precursory stoichiometry, layered Ti{sub 2}AlC is also prepared. The present protocol featuring affordable feedstock, low temperature, ambient pressure, high energy efficiency and controllable stoichiometry is promising for large-scale application.

36 MATERIALS SCIENCE↗

AGC-4 As-Run Uncertainty Analysis

The concept of measuring neutron flux (or fluence rate) with activation foils has existed since the late 1940s and is a well-used methodology. Activation foils are selected for their unique isotopic cross sections that create reaction products with desirable properties: relatively simple radioactive decay scheme, measurable quantities of gamma-rays or betas, and half-lives appropriate for the irradiation and decay durations of the experiment. The activation materials, deemed flux wires, fluence wires, dosimeters, or flux foils, are fabricated to have a mass appropriate for the irradiation as well so the measurement using a radiation detector following the irradiation is sufficient but not overwhelming in terms of total activity. Activation measurement results are expressed in terms of reaction rate, which can then be used to “adjust” the neutron spectrum. The Advanced Graphite Creep (AGC)-4 experiment contained 26 flux wire packages, each containing an iron and a niobium wire inside a vanadium capsule. For all stackup positions, the value of fast to thermal neutrons is higher than expected, but the total neutron fluence is near the predicted value of ~2 x 1022 n/cm2. As compared to the predicted neutron spectrum, there are four takeaways in the results as compared to the predicted ATR irradiation: 1) Additional fast (fission) neutrons present, 2) Spectrum hardening due to temperature, 3) Spectrum hardening due to container attenuation, 4) Total neutron fluence is close to predicted values. Since the neutron energy spectrum is a key parameter when attributing neutron damage in materials, the adjusted energy-dependent spectrum and the total neutron fluence results from the dosimeters can be incorporated for future calculations.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Proximity Spin–Orbit Torque on a Two-Dimensional Magnet within van der Waals Heterostructure: Current-Driven Antiferromagnet-to-Ferromagnet Reversible Nonequilibrium Phase Transition in Bilayer CrI 3

The recently discovered two-dimensional magnetic insulator CrI 3 is an intriguing case for basic research and spintronic applications since it is a ferromagnet in the bulk but an antiferromagnet in bilayer form, with its magnetic ordering amenable to external manipulations. Using the first-principles quantum transport approach, we predict that injecting unpolarized charge current parallel to the interface of the bilayer-CrI 3 /monolayer-TaSe 2 van der Waals (vdW) heterostructure will induce spin–orbit torque and thereby drive the dynamics of magnetization on the first monolayer of CrI 3 in direct contact with TaSe 2 . By combining the calculated complex angular dependence of spin–orbit torque with the Landau-Lifshitz-Gilbert equation for classical dynamics of magnetization, we demonstrate that current pulses can switch the direction of magnetization on the first monolayer to become parallel to that of the second monolayer, thereby converting CrI 3 from antiferromagnet to ferromagnet while not requiring any external magnetic field. We explain the mechanism of this reversible current-driven nonequilibrium phase transition by showing that first monolayer of CrI 3 carries current due to evanescent wave functions injected by metallic transition metal dichalcogenide TaSe 2 , while concurrently acquiring strong spin–orbit coupling via such a proximity effect, whereas the second monolayer of CrI 3 remains insulating. Furthermore, the transition can be detected by passing vertical read current through the vdW heterostructure, encapsulated by a bilayer of hexagonal boron nitride and sandwiched between graphite electrodes, where we find a tunneling magnetoresistance of ≃240%.

2D magnetic materials↗

Free vibrations of thin-walled semicircular graphite-epoxy composite frames

A detailed study is made of the effects of variations in lamination and material parameters of thin walled composite frames on their vibrational characteristics. The structures considered are semicircular thin walled frames with I and J sections. The flanges and webs of the frames are modeled by using 2-D shell and plate finite elements. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frame. The frequencies and modes predicted by the 2-D finite element model are compared with those obtained from experiments, as well as with the predictions of a non-dimensional thin walled beam finite element model. A detailed study is made of the sensitivity of the vibrational response to variations in the fiber orientation, material properties of the individual layers, and boundary conditions.

Carden, Huey D.↗

Free vibrations of thin-walled semicircular graphite-epoxy composite frames

A detailed study is made of the effects of variations in lamination and material parameters of thin walled composite frames on their vibrational characteristics. The structures considered are semicircular thin walled frames with I and J sections. The flanges and webs of the frames are modeled by using 2-D shell and plate finite elements. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frame. The frequencies and modes predicted by the 2-D finite element model are compared with those obtained from experiments, as well as with the predictions of a non-dimensional thin walled beam finite element model. A detailed study is made of the sensitivity of the vibrational response to variations in the fiber orientation, material properties of the individual layers, and boundary conditions.

Carden, Huey D.↗

Functionalization of Electrodes with Tunable [EMIM] x [Cl] x +1 – Ionic Liquid Clusters for Electrochemical Separations

Functionalization of electrodes with clusters of hydrophobic molecules may improve the energy efficiency and selectivity of electrochemical separations by modulating the desolvation process occurring at the interface. Ionic liquids (IL), which have a broad range of compositions and properties, are potential candidates for controlling the transport, desolvation, and adsorption of target ions at electrochemical interfaces. We report a joint experimental and theoretical investigation of the structure, stability, and selective adsorption properties of the IL clusters 1-ethyl-3-methylimidazolium chloride [EMIM] x [Cl] x+1 - (x = 1 – 10) and demonstrate their ability to adsorb and separate ions from solution. The structure and stability of the IL clusters are determined experimentally using high-mass-resolution electrospray ionization mass spectrometry, collision-induced dissociation, and negative ion photoelectron spectroscopy. Global optimization theory and ab initio molecular dynamics simulations provide molecular-level insight into the bonding and structural fluxionality of these species. Ion soft landing is used to selectively functionalize the surface of highly oriented pyrolytic graphite (HOPG) working electrodes with [EMIM] 1 [Cl] 2 - , [EMIM] 3 [Cl] 4 - , and [EMIM] 5 [Cl] 6 - clusters. Kelvin probe microscopy provides insight into the relative stability of the clusters on HOPG and their effect on the work function of IL-functionalized electrodes. Cyclic voltammetry measurements reveal irreversible adsorption of Fe(CN) 6 4-/3- anions during redox cycling, while electrochemical impedance spectroscopy indicates a substantial decrease in the electron transfer resistance of the IL-functionalized electrodes due to adsorption of Fe(CN) 6 4-/3- . Overall, our findings demonstrate that IL clusters with different size and stoichiometry may be used to increase the efficiency of electrochemical separations, opening new horizons in selective electrode functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of simulated space environmental parameters on six commercially available composite materials

The effects of simulated space environmental parameters on microdamage induced by the environment in a series of commercially available graphite-fiber-reinforced composite materials were determined. Composites with both thermoset and thermoplastic resin systems were studied. Low-Earth-Orbit (LEO) exposures were simulated by thermal cycling; geosynchronous-orbit (GEO) exposures were simulated by electron irradiation plus thermal cycling. The thermal cycling temperature range was -250 F to either 200 F or 150 F. The upper limits of the thermal cycles were different to ensure that an individual composite material was not cycled above its glass transition temperature. Material response was characterized through assessment of the induced microcracking and its influence on mechanical property changes at both room temperature and -250 F. Microdamage was induced in both thermoset and thermoplastic advanced composite materials exposed to the simulated LEO environment. However, a 350 F cure single-phase toughened epoxy composite was not damaged during exposure to the LEO environment. The simuated GEO environment produced microdamage in all materials tested.

Funk, Joan G.↗

A Robust Biomarker

Polymers of bacterial origin, either through cell secretion or the degraded product of cell lysis, form isolated mucoidal strands as well as well-developed biofilms on interfaces. Biofilms are structurally and compositionally complex and are readily distinguishable from abiogenic films. These structures range in size from micrometers to decimeters, the latter occurring as the well-known, mineralised biofilms called stromatolites. Compositionally bacterial polymers are greater than 90 % water, with while the majority of the macromolecules forming the framework of the polymers consisting of polysaccharides (with and some nucteic acids and proteins). These macromolecules contain a vaste amount of functional groups, such as carboxyls, hydroxyls, and phosphoryls which are implicated in cation-binding. It is the elevated metal- binding capacity which provides the bacterial polymer with structural support and also helps to preserves it for up to 3.5 b.y. in the terrestrial rock record. The macromolecules, thus, can become rapidly mineralised and trapped in a mineral matrix. Through early and late diagenesis (bacterial degradation, burial, heat, pressure and time) they break down, losing the functional groups and, gradually, their hydrogen atoms. The degraded product is known as "kerogen". With further diagenesis and metamorphism, all the hydrogen atoms are lost and the carbonaceous matter becomes graphite. until the remnant carbonaceous material become graphitised. This last sentence reads a bit as if ALL these macromolecules break down and end up as graphite., but since we find 441 this is not true for all of the macromolecules. We have traced fossilised polymer and biofilms in rocks from throughout Earth's history, to rocks as old as the oldest being 3.5 b.y.-old. Furthermore, Time of Flight Secondary Ion Mass Spectrometry has been able to identify individual macromolecules of bacterial origin, the identities of which are still being investigated, in all the samples containing fossil biofilm, including the 3.5 b.y..-old carbonaceous cherts from South Africa and Australia. As a result of the unique compositional, structural and "mineralisable" properties of bacterial polymer and biofilms, we conclude that bacterial polymers and biofilms constitute a robust and reliable biomarker for life on Earth and could be a potential biomarker for extraterrestrial life.

Westall, F.↗

Ordered Layered Organic-Inorganic of 4-Chlorophenoxyacetate-Zinc Layered Hydroxide Nanohybrid

Ordered layered organic-inorganic nanostructure composed of zinc layered hydroxide-4-chlorophenoxy acetate (ZLH-4CPA) was prepared by reaction of an organic anion, 4-chlorophenoxy acetate (4CPA) with ZnO under aqueous environment. The concentration of 4CPA was found to be a controlling factor in determining the formation of phase pure, well ordered nanolayered hybrid material. At lower concentration of 4CPA (0.05 M), a mixed phase was observed in which ZnO co-existed with the nanohybrid. At 0.01 M, a pure phase is obtained with high crystallinity but a well ordered nanolayered structure is lacking. A pure phase, well ordered nanolayered hybrid can be clearly observed at 0.2 M 4CPA. ZnO shows well defined grain structure of various sizes at nanometer scale range. Direct reaction between ZnO and 4CPA under aqueous environment resulted in the formation of 4CPA-ZLH nanohybrid with flake-like fibrous structure. On heating at 500 deg. C for 5 h under atmospheric condition, the nanohybrid was transformed back to well defined grain structure, as previously observed for the starting materials, ZnO. This shows that the nanohybrid has ''memory effect'' property. Well ordered nanolayered hybrid with up to 5 harmonics, from which the average basal spacing of 19.03 A of the material was deduced, showing long range order of the layer packing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

HIGH-STRENGTH LIGHTWEIGHT ENGINES FOR HEAVY-DUTY DIESEL TRUCKS

This project with Cummins supports the development of next generation heavy duty diesel engines that can achieve a 50% or better Break Thermal Efficiency (BTE). The fuel efficiency roadmap for the 50% BTE engine considers six main areas for efficiency improvement in the baseline engine, several of which involve making more efficient use of thermal energy (heat) in the engine. Increased operating temperatures and improved thermal management are expected to enable significant increases in $power$ $density$, thus resulting in greater power output for the same sized engine or engine downsizing (or light weighting) for the same power output. However, it has become apparent that several key components will be exposed to temperatures beyond the capabilities of current engine and exhaust materials, requiring the availability of the next generation of high temperature materials to allow the engine to reach the targeted efficiencies, commercially viable durability, and emission targets. The objective of this project was to identify and/or develop key materials, and evaluate their critical properties to enable the design and development of a lightweight, higher efficiency engine, with enhanced temperature capability and reduced heat-loss to the atmosphere in order to facilitate waste heat recovery and improved efficiency. An increase in the temperature capability of exhaust manifold materials, and piston materials were identified as having a positive influence on the efficiency of the next generation diesel engines. Since the current materials (High SiMo cast irons used in exhaust manifolds, and 4140 steel in pistons) are already operating near their limits of their temperature and strength capabilities, it was determined that new materials with the right combination of properties are required for these components. Oxidation and constrained thermal fatigue tests were used to down-select CF8C plus (CF8CP), a cast austenitic stainless steel, for exhaust manifolds capable of operating at higher temperatures. A prototype exhaust manifold was fabricated using CF8CP and successfully tested in a marine engine. A functionally graded multiple-layer thermal barrier coating system was designed with four layers of mixed bondcoat alloy (NiCoCrAlYHfSi) and yttria stabilized zirconia (YSZ) and was shown to reduce the effective thermal conductivity of the coating-substrate (steel and Ti-6Al-4V) system. The graded alloy and YSZ mixture were intended to achieve better match of thermal expansion coefficient (CTE) and minimize thermal stresses. Such coatings can increase the temperature capability of pistons fabricated from steel and Ti-alloys. Effect of oil additives and friction conformal contact friction tests showed there was a 15-30% reduction in friction by the polymer-graphite composite coating compared to the uncoated steel piston. Standalone Mn-P coating had little beneficial impact. Changing the oil from CJ-4 to PC-11 had little impact on the friction behavior in boundary lubrication. Wear behavior was tested under a point contact configuration with a high contact pressure. The candidate CK-4 oil showed similar or slightly better lubricity compared to the CJ-4 oil while the candidate FA-4 oil decisively increased the piston skirt wear. Although both coatings prevented scuffing failure observed for the uncoated steel skirt in a base oil without an additive package, they surprisingly caused a higher piston wear rate when tested in any of the fully formulated engine oil. The detrimental impact was attributed to the Mn-P film, either as a standalone coating, or a coating interlayer. The porous and brittle Mn-P film was broken during the wear test and the released hard Mn-P grains are suspected to cause third-body abrasion to accelerate the wear process. This work also evaluated the feasibility of developing an improved high temperature, low mass, cost-neutral turbocharger compressor wheel for heavy-duty engine applications from TiAl using additive manufacturing, utilizing its unique ability to fabricate high strength, low weight structures. This work has shown that the phase transforming nature of the TiAl alloys enable obtaining equiaxed microstructures in the as-built state without the need for tedious beam parameter manipulations. The HIPed structures have good RT tensile properties that will enable them to be surface machined to the required tolerance that can 2 then be heat treated to obtain the desired microstructures. Additionally, the negligible residual stresses stemming from the high build chamber temperatures ensure the parts are formed without cracks (one of the major issues in traditional manufacturing of these intermetallics).

33 ADVANCED PROPULSION SYSTEMS↗

Direct observation of interfacial reaction of Ni/6H-SiC and carbon redistribution by in situ transmission electron microscopy

Highlights: • Interfacial reaction mechanism for Ni/SiC at 550 °C is investigated in situ by TEM. • NBED, EDS and EELS analyses were performed to identify the phases formed. • Carbon atoms from decomposed SiC were redistributed in three different regions. • Graphite/Ni{sub 31}Si{sub 12}/Ni{sub 31}Si{sub 12} + graphite/6H-SiC structure was observed after the reaction. - Abstract: The interfacial reaction of Ni/SiC has been attracting considerable attention because SiC substrate has excellent chemical and thermal stability and low electrical resistivity, which are essential properties for various device applications. However, research on the initial reaction at low temperature and exact mechanism is currently insufficient. Therefore, we investigated the reaction of Ni films on a 6H-SiC substrate and the behavior of carbon at 550 °C by direct observation with transmission electron microscopy (TEM) during in situ heating. At 550 °C, the Ni{sub 31}Si{sub 12} phase formed during the reaction of Ni and SiC. The Ni silicide layer thickened as the reaction front proceeded toward the 6H-SiC substrate and carbon atoms from decomposed SiC converted into graphite. In addition, carbon existed in three regions. First, carbon existed as graphite on the external surface of Ni silicide layer during initial reaction. Second, graphite formed at the original interface between the Ni film and the 6H-SiC substrate. Finally, carbon existed at the bottom of the Ni silicide region due to its low diffusivity in the silicide. The elemental distribution of Ni, Si, and C was observed in detail through various analytical techniques. We demonstrate the reaction mechanism of Ni and SiC at 550 °C and the distribution of carbon atoms.

36 MATERIALS SCIENCE↗

Effect of Acid-Washing on the Nature of Bulk Characteristics of Nitrogen-Doped Carbon Nanostructures as Oxygen Reduction Reaction Electrocatalysts in Acidic Media

In this work, CN x catalysts were synthesized using Fe-doped MgO as a growth substrate. The oxygen reduction reaction (ORR) performance of the synthesized samples was evaluated in a half-cell. Acid-washing improved the ORR activity for the synthesized CN x samples. This is attributed to the removal of the exposed metal, which is likely to be blocking the active sites. Characterization experiments suggest that acid-washing totally eliminates the support material (MgO) and renders carbon more graphitic. This is likely to be due to elimination of amorphous or less crystalline species during washing. In addition, characterization experiments reveal significant differences in the metallic species that are exposed versus those encased in the carbon nanostructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial Issues and Modification of Solid Electrolyte Interphase for Li Metal Anode in Liquid and Solid Electrolytes

Abstract The high energy density required for the next generation of lithium batteries will likely be enabled by a shift toward lithium metal anode from the conventional intercalation‐based anode such as graphite. However, several critical challenges for Li metal originate from its highly reactive nature and the hostless reaction of deposition and stripping impede the practical use of Li metal as an anode. The role of the solid electrolyte interphase (SEI) is very important for the Li metal anode where the SEI must protect the dynamically changing surface of the Li metal. Since the SEI‐generating reaction mechanisms for the two different electrolyte systems, liquid and solid, are considerably different, the SEI layers formed between the Li metal and the electrolytes in the two electrolyte systems have substantially different properties, causing different interfacial issues. Inhibition of the interfacial problems requires different strategies to reinforce the SEI layer for each of the electrolyte systems. However, the differences in the two electrolyte systems have not been clearly compared in the prior literature. In this report, the interfacial issues for the two different electrolyte systems are compared and different strategies for SEI modification are provided to overcome the issues.

25 ENERGY STORAGE↗

Control of High-Temperature Static and Transient Thermomechanical Behavior of SiMo Ductile Iron by Al Alloying

Abstract Silicon and molybdenum ( SiMo ) ductile iron is commonly used for exhaust manifolds because these components experience thermal cycling in oxidizing environment, which requires resistance to fatigue during transient thermomechanical loads. Previous studies have demonstrated that alloying elements, such as Al , to SiMo ductile iron reduces the amount of surface degradation during static high-temperature exposure. However, deterioration of sphericity of the graphite nodules and a decrease in ductility could affect the tendency of cracking during thermal cycling. In this article, the effect of Al alloying on static and transient thermomechanical behavior of SiMo ductile iron was investigated to optimize the amount of Al alloying. A thermodynamic approach was used to confirm the effect of the Al alloying on the phase transformations in two SiMo cast irons, alloyed by 1.8% Al and 3% Al . These two alloys were cast in a laboratory along with the baseline SiMo ductile iron. Several experimental methods were used to evaluate the dimensional stability, physical properties, static oxidation, and failure resistance during constrained thermal cycling testing to compare their high-temperature capability. Experimental results verified that Al alloying increases the temperature range and decreases volume change during eutectoid transformation, which together with enhancement of oxidation protection improved the dimensional stability. Thermocycling tests showed that the number of cycles to failure depends on the amount of Al alloying and the applied high-temperature exposure during each cycle. SEM/EDX, high-resolution TEM and µCT analysis were used to verify the mechanism resulting from the Al alloying protection. It was shown that an optimal level of Al alloying for balancing oxidation and thermal cracking resistance depends on thermomechanical conditions of application.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.