Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inlets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparison to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. Sensitivity analysis indicated these savings come largely from reduced labor costs for design and engineering and manufacturing setup.

15 GEOTHERMAL ENERGY↗

Application of gas-liquid fluid dynamics techniques to the modeling of sprays

The purpose of this paper is to provide an overview of modern computational techniques for gas-liquid systems as they are found in liquid fuel atomization applications. Fuel atomization – the generation of ligaments and droplets from the bulk of liquid injection – offers several modeling challenges: a localized surface tension force, depending on the accurate evaluation of interface curvature; drastic topology changes, which complicate interface advection and introduce local length scales; and separation of phases that have substantially different physical properties. The techniques presented in this review specifically target the gas-liquid interface and couple its evolution in time with the equations of multiphase fluid dynamics. Recent algorithmic advances in this area are discussed first, including new methods that improve conservation properties and deal with very large density ratios and compressibility effects. This part is followed by a discussion on the issue of convergence in simulations with topology changes (i.e., surface pinch-off) and on the viewpoint offered by atomistic and statistical modeling. State-of the-art simulations for various types of fuel injectors are presented next, with particular attention to numerical convergence and to the inclusion of realistic inlet boundary conditions. The review is concluded by the discussion of some of the challenges that still remains in this field.

42 ENGINEERING↗

Membraneless seawater desalination

Disclosed are microfluidic devices and systems for the desalination of water. The devices and systems can include an electrode configured to generate an electric field gradient in proximity to an intersection formed by the divergence of two microfluidic channels from an inlet channel. Under an applied bias and in the presence of a pressure driven flow of saltwater, the electric field gradient can preferentially direct ions in saltwater into one of the diverging microfluidic channels, while desalted water flows into second diverging channel. Also provided are methods of using the devices and systems described herein to decrease the salinity of water.

42 ENGINEERING↗

Method and apparatus for measuring biofilm thickness and topology

An apparatus and method of measuring biofilm and biological activity on a surface is disclosed. The apparatus includes a biofilm, which includes one or more microorganisms, grown on a substrate. A viewing window is placed on a surface of the biofilm and a gas bubble is introduced between the viewing window and the surface of the biofilm. The space between the substrate and the viewing window may be enclosed in a casing that has an inlet and an outlet, forming a flow cell. A microscope system, such as a white light interferometer, captures data of the biofilm in situ and non-destructively. The 3D images of biofilm surface have high resolution while maintaining a large field of view. The apparatuses and methods will be useful for fundamental studies of biofilms, biomedical and environmental screening, and many other applications in biology and the life sciences.

Larimer, Curtis J.↗

Ion focusing

The invention generally relates to apparatuses for focusing ions at or above ambient pressure and methods of use thereof. In certain embodiments, the invention provides an apparatus for focusing ions that includes an electrode having a cavity, at least one inlet within the electrode configured to operatively couple with an ionization source, such that discharge generated by the ionization source is injected into the cavity of the electrode, and an outlet. The cavity in the electrode is shaped such that upon application of voltage to the electrode, ions within the cavity are focused and directed to the outlet, which is positioned such that a proximal end of the outlet receives the focused ions and a distal end of the outlet is open to ambient pressure.

Cooks, Robert Graham↗

Mid-section of a can-annular gas turbine engine to introduce a radial velocity component into an air flow discharged from a compressor of the mid-section

A midframe portion (113) of a gas turbine engine (110) is provided, including a compressor section (112) with a last stage blade (124). The compressor section (112) is configured to introduce a radial velocity component into an air flow (111) such that the air flow is discharged from the compressor section (112) at a mixed direction based on a combined longitudinal velocity component and radial velocity component. The midframe portion (113) further includes a manifold (121) to directly couple the air flow from an outlet of the compressor section (112) to an inlet of a respective combustor head (118) of the gas turbine engine (110).

Rodriguez, Jose L.↗

Circulating fluidized bed with moving bed downcomers and gas sealing between reactors

A system and process for carrying out one or more chemical reactions are provided and include one or more chemical reactors having particulate solids forming a bed therein, and a gas stripping zone forming a non-mechanical seal between said reactors which includes a conduit connecting the reactors. The conduit includes an inlet for a stripping gas which is adapted to prevent process gas from passing between reactors while permitting particulate solids to pass between reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) Winter Intensive Operational Period: Aerodynamic Particle Sizer Field Campaign Report

An aerodynamic particle sizer spectrometer (APS, model 3321 by TSI Inc., Shoreview, Minnesota) was deployed at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility Eastern North Atlantic (ENA) observatory during the second (winter) intensive operational period (IOP) of the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) field campaign. Data were collected from January 9 through February 26, 2018, covering the second deployment of the ARM Aerial Facility (AAF) aircraft within ACE-ENA. The standard ENA instrument suite does not provide measurements of aerosol particle size distribution for diameters greater than one micron. Properties of coarse-mode (super-micron) aerosols are rarely measured, although super-micron particles can play an important role in the aerosol life cycle, affecting aerosol optical properties and cloud nuclei activity (e.g., Clarke et al. 2003). The APS was deployed to fill this gap in particle size measurements: it is capable of measuring size-resolved concentration of the aerosols in the 0.5-20 μm range (aerodynamic diameter). The APS was installed in the aerosol trailer to sample through the main stack. Special attention was given to selection of the instrument location (just below the main stack) to minimize particle losses in the connecting lines. Most atmospheric aerosols are hygroscopic, so the measurement of the aerosol size distributions should either be performed in a controlled humidity environment or accompanied by concurrent measurement of the temperature and humidity of the sample air. The latter strategy was used during this deployment: a high-precision humidity/temperature transmitter (model EE08 by E+E Elektonik GMBH, Engerwitzdorf, Germany) was mounted in the APS sampling line immediately upstream of the APS inlet. A dedicated laptop computer was used for data collection and communications. The APS was controlled with vendor-supplied software (Aerosol Instrument Manager, ver. 10.1, TSI); aerosol size distribution data were collected over a period of 55 seconds and converted to one-minute averages. Temperature and humidity analog signals were acquired via analog-to-digital converter (ADC) module (model WTAIN-M by Weeder Technologies, Fort Walton Beach, Florida) using vendor-supplied software (ModCom) with 1- sec resolution. In post-processing, the APS data were exported from TSI proprietary format into “comma-separated value” American Standard Code for Information Interchange (ASCII) files and matched with appropriately averaged temperature and humidity data. Two significant periods of missing data were caused by local power outages. Vendor-supplied software was not designed for unattended operation: it needs to be manually restarted including sensor configuration setup.

ACE-ENA, Azores, ultra-high-sensitivity aerosol sp↗

Cold plate with combined inclined impingement and ribbed channels

Heat transfer devices and methods for making the same that include a first enclosure having at least one inlet port; a second enclosure having a bottom plate and one or more dividing walls to establish channels, at least one internal surface of each channel having rib structures to create turbulence in a fluid flow; and a jet plate connecting the first enclosure and the second enclosure having impinging jets that convey fluid from the first enclosure to the channels, said impinging jets being set at an angular deviation from normal to cause local acceleration of fluid and to increase a local heat transfer rate.

Parida, Pritish R.↗

Improving Flexibility and Performance of Staged Pressurized Oxy-Combustion

Staged pressurized oxy-combustion (SPOC) is a novel coal combustion power technology being developed by Washington University in St. Louis (WUSTL) that offers the potential to deliver low-carbon power at a reduced cost. Oxy-combustion plants operate by removing most of the nitrogen contained in air prior to combustion, thereby burning fuel in a near-pure oxygen stream instead of air. This combustion produces a flue gas containing primarily carbon dioxide (CO 2 ) and water vapor that allows relatively straightforward CO 2 capture. First-generation, atmospheric oxy-combustion technology relies on a flue gas recycle (FGR) diluent to reduce the peak temperatures achieved and the resulting high thermal radiation levels that would otherwise occur in a fuel/oxygen only flame. In contrast, by staging the combustion in several steps, SPOC reduces the peak temperatures of combustion without resorting to a high degree of FGR to control flame temperatures. The SPOC process operates by utilizing two or more pressurized boiler modules connected in series to produce fuel staging; hence, only a portion of the fuel is combusted in any given combustion module. Subsequently the thermal energy released at each stage can be captured and removed from the gases prior to subsequent stages, when more fuel is introduced. This allows the SPOC process to operate with minimal FGR, avoiding the associated efficiency losses and additional costs. While the staging controls the heat release profile in SPOC, operating in a pressurized condition yields a more compact system, reducing modular boiler size and delivering enhanced heat transfer. Additionally, operating at elevated pressures ensures that the latent heat of moisture available from moisture in the fuel and generated by the combustion of the hydrogen content in the fuel can be captured as useful thermal energy for steam turbine integration. This is possible due to elevated dew point from the high partial pressure of the moisture generated in this process, which allows substantial feedwater heater bypassing to be achieved. The inclusion of this thermal energy, normally lost to the atmosphere in traditional combustion processes or to cooling systems in atmospheric oxy-combustion, allows the resultant net efficiency of the SPOC system to be up to 6 percentage points greater than first-generation systems. To begin the process of developing this technology for full-scale application, the Electric Power Research Institute, Inc. teamed up with WUSTL, American Air Liquide, Doosan Babcock, and the U.S. Department of Energy to investigate a practical and workable boiler design concept that would minimize process risks where possible. The SPOC system offers unique process flexibility opportunities due to the staged nature of the combustion, making it a prime candidate for future primary energy delivery where the ability to operate at reduced load in an efficient manner and ramp rapidly will be valuable for balancing intermittent renewable electricity generation. The efficiency of traditional coal-fired power plants is lower at reduced loads below the steam temperature control range due to the challenges in balancing the heat pickup between radiative and convective superheater and reheater surface. Introducing additional heating surface for optimal extended controlled low load operation will likely lead to excessive attemperation at high loads, ultimately leading to a poorer overall cycle efficiency. The SPOC process can facilitate the adjustment of fuel firing rates between stages, targeting heat pickup to where it is most needed and potentially can shut down stages for low-load operation, facilitating an increased steam temperature control range on turndown. The boiler design concept assessment is being carried out to identify the maximum permissible compactness of the SPOC boiler heating surfaces. The assessment will determine the minimum overall height that will deliver appropriate tube operating metal temperatures at full load and achieve rated reheat steam temperatures at low operating loads, balanced against the needs of efficient coal combustion, and the potential resultant slagging and ash environments. The design parameters are being validated by combustion testing in the 100-kWth pressurized combustion test rig at WUSTL. Parameters being investigated include flame stability, fuel burnout, ash composition, radiative heat flux, and temperature profiles. These are being carried out for a range of inlet gas conditions and compositions and at multiple load conditions to investigate combustion stability at reduced load. The results of this testing inform the modeling of the large-scale system, that was sized at 550 MWe to allow direct comparison with the National Energy Technology Laboratory baseline cases for atmospheric oxy-combustion, air firing, and air firing with post-combustion capture.

20 FOSSIL-FUELED POWER PLANTS↗

Thermal-Hydraulic Performance of Wavy-Fin Heat Exchanger Under Dehumidifying Condition

Condensate accumulation on the heat exchangers has been identified as a critical problem for evaporators operating below the dew point temperature. An experimental study has been conducted to investigate the thermal-hydraulic performance of wavy fin heat exchangers under dehumidifying operating conditions. The relative comparison of pressure drop and heat transfer rate has been made at different inlet flow rates considering heat exchanger characteristics such as fin density and flow depth. The relative contribution of sensible and latent capacity to the total heat exchanger's capacity has been investigated at different flow rates. The phenomena of condensate carry-over has been investigated qualitatively based on observation. Towards the end the impact of fin density on heat transfer rate and pressure drop for for fully and partially wet heat exchangers has been compared.

Nawaz, Kashif↗

METAL FOAMS: NOVEL MATERIALS FOR AIR COOLING AND HEATING APPLICATION- PERFORMANCE UNDER DRY, WET AND FROSTING CONDITIONS

Metal foams have emerged as a potential material for advanced heat exchangers in air-cooling systems. The novel materials have a large surface-area-to-volume ratio and a tortuous structure which promotes flow mixing in heat exchanger applications. The current study provides an overview of the thermal-hydraulic performance of metal foam heat exchangers under dry, wet and frosting operations. The experiments have been conducted in a wind tunnels at a range of operating conditions varying air flow rate, inlet air temperature and relative humidity and the associated pressure drop and heat transfer rate have been measured. The impact of metal foam geometry has been evaluated and the findings have been summarized for heat transfer rate and pressure drop when the heat exchanger operates at various operating conditions.

Nawaz, Kashif↗

Time-Dependent Reliability Analysis of Nuclear Hybrid Energy Systems

This paper focuses on developing a framework for comprehensive time-dependent reliability analysis of a nuclear hybrid energy system (NHES) design. Subsystem interactions of this complex integrated system under stochastic electricity demand and load-following operation capabilities requires dynamic reliability assessment of the NHES in component, subsystem and system level. In order to capture the dynamic operational behavior of critical systems and components, a detailed thermal hydraulic model of the NHES is generated using Modelica and tested under different electricity demand histories generated using RAVEN. The physical data (e.g., valve position, flow rates, inlet outlet water temperatures) gathered from Modelica used to calculate time-dependent failure rates through fitting data into the piecewise Weibull distribution. Optimum maintenance interval is calculated, and maintenance cost estimates based on the calculated reliability metric is presented for the selected component. Component time-dependent failure rates fed into the subsystem reliability model built with non-Markovian Stochastic Petri Nets. The component and subsystem failure rates are calculated and updated in every hour to characterize the system behavior appropriately and to understand operational reliability of the NHES design in a given time.

Guler Yigitoglu, Askin↗

2018 Research Highlight in Manufacturing: Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. The turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparison to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. The results showed that MSP could highly vary between 893 $/kW and 30 $/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. As an example, the unit price of a 5 MW standard design turbine could be 150 $/W cheaper than the custom design. Sensitivity analysis indicated that these savings come largely from reduced labor costs for design and engineering and manufacturing setup. In addition to manufacturing cost savings, there is a delivery time saving up to 10 months, which could have a positive effect to construction financing operation time. Another advantage of these standard turbines is their adaptability to different geothermal systems by operating at off-design conditions. We also modeled off-design turbine efficiencies within the commercially-favorable operating range of a standard ORC compared to custom-designed ORC equipment. Than we used these performance calculations and power output capacities in a discounted cash flow (DCF) analysis of plant operations and financing, thereby creating representative techno economic models of a total geothermal power plant. I this scope we used NREL's System Advisor model (SAM) and performed DCF analysis of standard and custom design turbines using results from IPSEpro over range of temperatures of interest. In this scope 63 different off-design cases were analyzed. This helped us to answer the question; 'Can today`s capital cost savings compensate the future revenue losses due to lower electricity generation?' The results showed that, the net capital cost savings for the modeled 5 MW case study may reach up to +$1,298,672. Also, the difference between NPV of standard design and custom design turbine could reach up to +$733,940. To sum up, when all the things mentioned above are taken into consideration, it can be said that, the standard turbines are competitive over a wide range of temperatures and flow rates and the give positive NPV differences for certain cases near their design point.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Aerosol ionizer

A system and method comprising an ion production chamber having an ultra-violet light source disposed towards said chamber, a coated quartz plate between the chamber and the UV source whose coating absorbs incident UV light and ejects electrons into the chamber through the photoelectric effect, a harvest gas disposed to flow through the chamber from an inlet to an outlet, and a jet operable to introduce a sample into the harvest gas flow. In some embodiments the system includes using helium as the harvest gas. Certain embodiments include introducing a sample perpendicular to the harvest gas flow and using multiple sample introduction jets to increase mixing efficiency. In some embodiments the harvest gas and particle sample jet are one and the same. The charge sample may be coupled to a MEMS-based electrometer.

36 MATERIALS SCIENCE↗

Supercritical CO2 Power Cycles Design Basis – Brayton Cycle Analysis - Update

Fundamental sCO2 cycle analyses. This is an ESPA/Noblis presentation of a study made to look at indirect sCO2 Brayton cycles using a generic heat source from a fundamental thermodynamic prospective. Included are overviews of factors impacting cycle configurations, heat sources and outlines of both indirect and direct Brayton Cycles. Sensitivity Analyses are performed on a number of items that include working fluids, cycle pressure ratios and pressures, turbine inlet temperatures, and turbomachinery efficiencies. The study includes testing various equation of state (EOS) to arrive at reasonable and accurate thermodynamic values for fluids in the critical point region. The results are presented in many summary plots to illustrate the findings to the reader. Additional discussion is available in a final report.

Generic heat source↗

COMBUSTION AND EMISSION CHARACTERISTICS OF A LEAN AXIAL-STAGE COMBUSTOR

Gas turbine engines with high operational flexibility represent an important area of research. In support of this, the reduction of NOx emissions at high-temperature, full-load conditions are the main target of this research study. To overcome the challenge of decreasing the residence time of hot exhaust gas in the burner, the approach of axial-staged combustion has been used, which aims to burn at lean conditions. A main combustion stage with a conventional burner is followed by a jet-in-crossflow (JIC) stage downstream. This second combustion stage, the test section, burns well over a third of the total fuel amount, which is added by a jet inlet. A steady Computational Fluid Dynamics (CFD) model in Star-CCM+ was created to analyze the JIC stage. A structured mesh grid with 1.7 million cells and local refinement domains was used along with RANS equations, Realizable k-ε turbulence, Complex Chemistry model with Laminar Flame Concept (LFC) applied. The findings of the computational model include a detailed description of the flow field, focusing on vortex formation and penetration depth. Three vortex types and local pressure losses of up to 6% in the mixing domain were identified. Results were compared with similar data from literature and a very good match was yielded. Optical laser diagnostics should work well to capture the predicted flow penetration. The highest local reaction rates were observed inside a thin flame front, 4 to 6 diameters downstream of the jet. The jet showed a limited expansion into the available channel domain, resulting in low heat release and a methane conversion of only 52%. Providing an enhanced amount of oxygen was proven to increase the CH4 conversion significantly. Emissions were analyzed for an estimated species composition from the main burner. A CO production of 9.85‰ and the reduction of an incoming NOx amount by 15% were determined, outlining the potential of axial-staged combustion. Further numerical investigation along with experimental verification is in progress.

03 NATURAL GAS↗

Fuel nozzle having respective arrays of pre-mixing conduits with respective vortex generators

A fuel nozzle including vortex generating features for use in a combustion turbine engine is provided. An array of inner pre-mixing conduits (20) extends between an inlet end (14) and an outlet end (16) of the nozzle. An array of outer pre-mixing conduits (22) may be disposed radially outwardly relative to the inner pre-mixing conduits (20). A fuel-directing tube (24) includes fuel-directing arms (26) structured to direct fuel flow into the outer pre-mixing conduits (22) to be mixed with a flow of air. The fuel-directing arms include a bluff structural arrangement (30) that may be disposed upstream of fuel injection locations (32, 32') into the outer pre-mixing conduits (22). The proposed nozzle is believed to provide superior micro-mixing capability, such as by increasing the depth of penetration of jets of fuel in a cross-flow of air, and/or formation of vortices in a wake zone downstream from the vortex generating features.

Meadows, Joseph↗

Refine your search to explore more results.