Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Radiation from Ag high energy density Z-pinch plasmas and applications to lasing

Silver (Ag) wire arrays were recently introduced as efficient x-ray radiators and have been shown to create L-shell plasmas that have the highest electron temperature (>1.8 keV) observed on the Zebra generator so far and upwards of 30 kJ of energy output. In this paper, results of single planar wire arrays and double planar wire arrays of Ag and mixed Ag and Al that were tested on the UNR Zebra generator are presented and compared. To further understand how L-shell Ag plasma evolves in time, a time-gated x-ray spectrometer was designed and fielded, which has a spectral range of approximately 3.5–5.0 Å. With this, L-shell Ag as well as cold L{sub α} and L{sub β} Ag lines was captured and analyzed along with photoconducting diode (PCD) signals (>0.8 keV). Along with PCD signals, other signals, such as filtered XRD (>0.2 keV) and Si-diodes (SiD) (>9 keV), are analyzed covering a broad range of energies from a few eV to greater than 53 keV. The observation and analysis of cold L{sub α} and L{sub β} lines show possible correlations with electron beams and SiD signals. Recently, an interesting issue regarding these Ag plasmas is whether lasing occurs in the Ne-like soft x-ray range, and if so, at what gains? To help answer this question, a non-local thermodynamic equilibrium (LTE) kinetic model was utilized to calculate theoretical lasing gains. It is shown that the Ag L-shell plasma conditions produced on the Zebra generator at 1.7 maximum current may be adequate to produce gains as high as 6 cm{sup −1} for various 3p → 3s transitions. Other potential lasing transitions, including higher Rydberg states, are also included in detail. The overall importance of Ag wire arrays and plasmas is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling a thermionic energy converter using finite-difference time-domain particle-in-cell simulations

A thermionic energy converter (TEC) is a static device that converts heat directly into electricity by boiling electrons off a hot emitter surface across a small inter-electrode gap to a cooler collector surface. The main challenge in TECs is overcoming the space charge limit, which limits the current transmitted across a gap of a given voltage and width. We have verified the feasibility of studying and developing a TEC using a bounded finite-difference time-domain particle-in-cell plasma simulation code, OOPD1, developed by Plasma Theory and Simulation Group, formerly at UC Berkeley and now at Michigan State University. In this preliminary work, a TEC has been modeled kinetically using OOPD1, and the accuracy has been verified by comparing with an analytically solvable case, giving good agreement. With further improvement of the code, one will be able to quickly and cheaply analyze space charge effects, and seek designs that mitigate the space charge effect, allowing TECs to become more efficient and cost-effective.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Weakly relativistic quantum kinetic theory for electrostatic wave modes in magnetized plasmas

We have derived the electrostatic dispersion relation in a magnetized plasma using a recently developed quantum kinetic model based on the Dirac equation. The model contains weakly relativistic spin effects such as Thomas precession, the polarization currents associated with the spin and the spin-orbit coupling. It turns out that for strictly electrostatic perturbations the non-relativistic spin effects vanish, and the modification of the classical dispersion relation is solely associated with the relativistic terms. Several new wave modes appear due the electron spin effects, and an example for astrophysical plasmas are given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisionless microinstabilities in stellarators. III. The ion-temperature-gradient mode

We investigate the linear theory of the ion-temperature-gradient (ITG) mode, with the goal of developing a general understanding that may be applied to stellarators. We highlight the Wendelstein 7X (W7-X) device. Simple fluid and kinetic models that follow closely from existing literature are reviewed and two new first-principle models are presented and compared with results from direct numerical simulation. One model investigates the effect of regions of strong localized shear, which are generic to stellarator equilibria. These “shear spikes” are found to have a potentially significant stabilizing affect on the mode; however, the effect is strongest at short wavelengths perpendicular to the magnetic field, and it is found to be significant only for the fastest growing modes in W7-X. A second model investigates the long-wavelength limit for the case of negligible global magnetic shear. The analytic calculation reveals that the effect of the curvature drive enters at second order in the drift frequency, confirming conventional wisdom that the ITG mode is slab-like at long wavelengths. Using flux tube simulations of a zero-shear W7-X configuration, we observe a close relationship to an axisymmetric configuration at a similar parameter point. It is concluded that scale lengths of the equilibrium gradients constitute a good parameter space to characterize the ITG mode. Thus, to optimize the magnetic geometry for ITG mode stability, it may be fruitful to focus on local parameters, such as the magnitude of bad curvature, connection length, and local shear at locations of bad curvature (where the ITG mode amplitude peaks)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic theory of the electron bounce instability in two dimensional current sheets—Full electromagnetic treatment

In the general context of understanding the possible destabilization of a current sheet with applications to magnetospheric substorms or solar flares, a kinetic model is proposed for studying the resonant interaction between electromagnetic fluctuations and trapped bouncing electrons in a 2D current sheet. Tur et al. [A. Tur et al., Phys. Plasmas 17, 102905 (2010)] and Fruit et al. [G. Fruit et al., Phys. Plasmas 20, 022113 (2013)] already used this model to investigate the possibilities of electrostatic instabilities. Here, the model is completed for full electromagnetic perturbations. Starting with a modified Harris sheet as equilibrium state, the linearized gyrokinetic Vlasov equation is solved for electromagnetic fluctuations with period of the order of the electron bounce period. The particle motion is restricted to its first Fourier component along the magnetic field and this allows the complete time integration of the non local perturbed distribution functions. The dispersion relation for electromagnetic modes is finally obtained through the quasineutrality condition and the Ampere's law for the current density. It is found that for mildly strechted current, undamped modes oscillate at typical electron bounce frequency with wavelength of the order of the plasma sheet half thickness. As the stretching of the plasma sheet becomes more intense, the frequency of these normal modes decreases and beyond a certain threshold in ε = B{sub z}/B{sub lobes}, the mode becomes explosive with typical growth rate of a few tens of seconds. The free energy contained in the bouncing motion of the electrons may trigger an electromagnetic instability able to disrupt the cross-tail current in a few seconds. This new instability–electromagnetic electron-bounce instability–may explain fast and global scale destabilization of current sheets as required to describe substorm phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computation of generalized and exact dispersion relations for longitudinal plasma waves in nonextensive statistics and the effects of the nonextensivity on the oscillation modes and damps

We have derived generalized dispersion relations for longitudinal waves in collisionless thermal plasma using linear Vlasov-Poisson kinetic model and nonextensive distributions for electrons. The Maxwellian limit of the dispersion relations, where the q-nonextensive parameter tends to one, is calculated. The generalized dispersion relations are reduced to polynomials for some specific values of q. The well-known modes of oscillations such as the Langmuir and electron acoustic waves have been obtained by solving the dispersion relations. Some new modes of oscillation are also found. Finally, the dependence of the oscillation modes and damps on q is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dispersion relations for the dust-acoustic wave under experimental conditions

The dust acoustic wave dispersion relation is tested to quantify its sensitivity to many physical processes that are important in laboratory dusty plasmas. It is found that inverse Landau damping and ion-neutral collisions contribute about equally to the growth rate ω{sub i}, pointing to the advantage of using a kinetic model for the instability. The growth rate ω{sub i} increases the most with an increase of dust number density, followed by an increase in ion-drift speed. The quantities that cause ω{sub i} to decrease the most when they are increased are the dust-neutral collision rate followed by the ion-neutral collision rate, ion collection current onto dust particles, and the ion thermal speed. In general, ω{sub i} is affected more than ω{sub r} by the choice of processes that are included. Strong Coulomb-coupling effects can be included in a compressibility term. The susceptibilities derived here can be combined in various ways in a dispersion relation to account for different combinations of physical processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In situ growth and coalescence of He-filled bi-dimensional defects in Si by H supply

In this work, ion implantations with in situ transmission electron microscopy observations followed by different rates of temperature ramp were performed in (001)-Si to follow the evolution of He-plates under the influence of hydrogen. The JANNUS and MIAMI facilities were used to study the first stages of growth as well as the interactions between co-planar plates. Results showed that under a limited amount of H, the growth of He-plates resulting from a subcritical stress-corrosion mechanism can be fully described by the kinetic model of Johnson-Mehl-Avrami-Kolmogorov with effective activation energy of 0.9 eV. Elastic calculations showed that the sudden and non-isotropic coalescence of close He-plates occurs when the out-of-plane tensile stress between them is close to the yield strength of silicon. After hydrogen absorption, surface minimization of final structure occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetics of silicide formation over a wide range of heating rates spanning six orders of magnitude

Kinetic processes involving intermediate phase formation are often assumed to follow an Arrhenius temperature dependence. This behavior is usually inferred from limited data over narrow temperature intervals, where the exponential dependence is generally fully satisfied. However, direct evidence over wide temperature intervals is experimentally challenging and data are scarce. Here, we report a study of silicide formation between a 12 nm film of palladium and 15 nm of amorphous silicon in a wide range of heating rates, spanning six orders of magnitude, from 0.1 to 10{sup 5 }K/s, or equivalently more than 300 K of variation in reaction temperature. The calorimetric traces exhibit several distinct exothermic events related to interdiffusion, nucleation of Pd{sub 2}Si, crystallization of amorphous silicon, and vertical growth of Pd{sub 2}Si. Interestingly, the thickness of the initial nucleation layer depends on the heating rate revealing enhanced mass diffusion at the fastest heating rates during the initial stages of the reaction. In spite of this, the formation of the silicide strictly follows an Arrhenius temperature dependence over the whole temperature interval explored. A kinetic model is used to fit the calorimetric data over the complete heating rate range. Calorimetry is complemented by structural analysis through transmission electron microscopy and both standard and in-situ synchrotron X-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemomechanical oscillations in a responsive gel induced by an autocatalytic reaction

In this article, we investigate dynamic behaviors of a gel layer attached to a rigid substrate and submerged in a continuous stirred tank reactor. With a continuous feed of fresh reactants in the reactor, the concentrations of reactants stay constant on the surface of the gel layer. However, the concentrations of reactants inside the gel are inhomogeneous and vary with time, which are determined by the diffusion and chemical reactions of the reactants. Additionally, both monotonic and oscillatory swelling-shrinking dynamics are predicted in the gel if the swelling capability of the gel depends on the concentration of a reactant. Based on autocatalytic reaction, kinetic model, and nonequilibrium thermodynamic theory of gels, in this article, we investigate the effect of the thickness of the gel layer, lateral prestretches in the gel and the initial concentrations of reactants in the gel on its dynamic behaviors. We have also calculated the evolution of the swelling force that the gel layer exerts on its constrained substrate. The results of this article may find potential applications in using responsive gels to make chemo-mechanical sensors, actuators, biomimetic devices, and even drug delivery systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal effects and space-charge limited transition in crossed-field devices

A fully kinetic model for the electron flow in a crossed field device is derived and used to determine the system stationary states. It is found that for low injection temperatures, there is a simultaneous presence of distinct stationary solutions and an abrupt transition between accelerating and space-charge limited regimes. On the other hand, for high injection temperatures, there is only a single stationary solution branch and the change between the regimes becomes continuous. For intermediate temperatures, it is then identified a critical point that separates the abrupt and continuous behaviors. It is also investigated how intrinsic space-charge oscillations may drive stationary states unstable in certain parameter regimes. The results are verified with N-particle self-consistent simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fully kinetic simulations of megajoule-scale dense plasma focus

Dense plasma focus (DPF) Z-pinch devices are sources of copious high energy electrons and ions, x-rays, and neutrons. Megajoule-scale DPFs can generate 10{sup 12} neutrons per pulse in deuterium gas through a combination of thermonuclear and beam-target fusion. However, the details of the neutron production are not fully understood and past optimization efforts of these devices have been largely empirical. Previously, we reported on the first fully kinetic simulations of a kilojoule-scale DPF and demonstrated that both kinetic ions and kinetic electrons are needed to reproduce experimentally observed features, such as charged-particle beam formation and anomalous resistivity. Here, we present the first fully kinetic simulation of a MegaJoule DPF, with predicted ion and neutron spectra, neutron anisotropy, neutron spot size, and time history of neutron production. The total yield predicted by the simulation is in agreement with measured values, validating the kinetic model in a second energy regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analyzing a steady-state phenomenon using an ensemble of sequential transient events: A proof of concept on photocurrent of bacteriorhodopsin upon continuous photoexcitation

The proton pump activity of bacteriorhodopsin in aqueous solution upon excitation with modulated continuous light was monitored electrochemically and analyzed by superimposing a series of transient proton translocation events Hᵢ⁺(t). An evolution function f(t)=(he{sup –lt}+k)/(h+k) , including a decay and a stationary offset, was introduced to weight the contribution of the individual transient events evolving with time in the envelope of the steady-state event. The evolution of the total proton concentration can be treated as an ensemble of weighted sequential transient events, H{sub total}⁺(t)=Σ{{sub i=0}sup n}Hᵢ⁺(t)∙f(t), and the temporal profile of the photocurrent is derived by differentiating the proton concentration with respect to time, (table) . The temporal profiles of the bacteriorhodopsin photocurrent in pH range of 6.3–8.1 were analyzed using a well-defined kinetics model and restricted mathematical formulization, and fitted temporal behaviors agreed with the observations. This successful proof-of-concept study on analyzing a steady-state phenomenon using an ensemble of sequential transient events can be generalized to quantify other phenomena upon continuous stimulation, such as estimation of the light-driven ion pump activities of the photosynthetic proteins upon illumination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging space charge regions in Sm-doped ceria using electrochemical strain microscopy

Nanocrystalline ceria exhibits a total conductivity several orders of magnitude higher than microcrystalline ceria in air at high temperature. The most widely accepted theory for this enhancement (based on fitting of conductivity data to various transport and kinetic models) is that relatively immobile positively charged defects and/or impurities accumulate at the grain boundary core, leading to a counterbalancing increase in the number of mobile electrons (small polarons) within a diffuse space charge region adjacent to each grain boundary. In an effort to validate this model, we have applied electrochemical strain microscopy to image the location and relative population of mobile electrons near grain boundaries in polycrystalline Sm-doped ceria in air at 20–200 °C. Our results show the first direct (spatially resolved) evidence that such a diffuse space charge region does exist in ceria, and is localized to both grain boundaries and the gas-exposed surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Si substrate on interfacial SiO{sub 2} scavenging in HfO{sub 2}/SiO{sub 2}/Si stacks

The scavenging kinetics of an ultra-thin SiO{sub 2} interface layer (SiO{sub 2}-IL) in an HfO{sub 2}/SiO{sub 2}/Si stack is discussed by focusing on the substrate effect in addition to oxygen diffusion. {sup 18}O tracing experiments demonstrate that the O-atom moves from the SiO{sub 2}-IL to the HfO{sub 2} layer during scavenging. SiO{sub 2}-IL scavenging with various substrates (Si, SiC, and sapphire) has been found to be significantly different, which suggests that the Si in the substrate is also necessary to continuously cause the scavenging. Based on these findings and thermodynamic considerations, a kinetic model where oxygen vacancy (V{sub O}) transferred from the HfO{sub 2} reacts with the SiO{sub 2}, which is in contact with the Si-substrate, is proposed for the SiO{sub 2}-IL scavenging.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amplification and reversal of Knudsen force by thermoelectric heating

We show that the Knudsen thermal force generated by a thermally-induced flow over a heated beam near a colder wall could be amplified significantly by thermoelectric heating. Bidirectional actuation is achieved by switching the polarity of the thermoelectric device bias voltage. The measurements of the resulting thermal forces at different rarefaction regimes, realized by changing geometry and gas pressure, are done using torsional microbalance. The repulsive or attractive forces between a thermoelectrically heated or cooled plate and a substrate are shown to be up to an order of magnitude larger than for previously studied configurations and heating methods due to favorable coupling of two thermal gradients. The amplification and reversal of the Knudsen force is confirmed by numerical solution of the Boltzmann-ESBGK kinetic model equation. Because of the favorable scaling with decreasing system size, the Knudsen force with thermoelectric heating offers a novel actuation and sensing mechanism for nano/microsystems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental verification of the Boltzmann relation at the wall in inductively coupled plasmas

The radial profiles of the electron density at the bottom wall were measured from the center to the edge at argon 3 mTorr with an RF power of 200 W. Since the Boltzmann relation in terms of the fluid picture only describes the behavior of the confined particles, the escaping electrons, which are not confined in plasmas, were not expected to follow the Boltzmann relation. However, unexpected results were observed. The spatial profiles of the density of escaping electrons and the floating potential were well described by the Boltzmann relation with the electron temperature. Moreover, it was concluded that the behavior of the escaping electrons is also described by the generalized Boltzmann relation in terms of the kinetic model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the physical processes ruling an atmospheric pressure air glow discharge operating in an intermediate current regime

Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the discharge for different inter-electrode distances are reported. A cathode-fall voltage close to 360 V and a current density at the cathode surface of about 11 A/cm{sup 2}, both independent of the discharge current, were found. The visible emissive structure of the discharge resembles to that of a typical low-pressure glow, thus suggesting a glow-like electric field distribution in the discharge. A kinetic model for the discharge ionization processes is also presented with the aim of identifying the main physical processes ruling the discharge behavior. The numerical results indicate the presence of a non-equilibrium plasma with rather high gas temperature (above 4000 K) leading to the production of components such as NO, O, and N which are usually absent in low-current glows. Hence, the ionization by electron-impact is replaced by associative ionization, which is independent of the reduced electric field. This leads to a negative current-voltage characteristic curve, in spite of the glow-like features of the discharge. On the other hand, several estimations show that the discharge seems to be stabilized by heat conduction; being thermally stable due to its reduced size. All the quoted results indicate that although this discharge regime might be considered to be close to an arc, it is still a glow discharge as demonstrated by its overall properties, supported also by the presence of thermal non-equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Refine your search to explore more results.