Search NASA⌕ Search

SEARCH · Search NASA

Results for “Launch Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Feasibility study of microwave electron heating on the C-2 field-reversed configuration device

Different microwave heating scenarios for the C-2 plasmas have been investigated recently with use of both the Genray ray-racing code and the IPF-FDMC full-wave code, and the study was focused on the excitation of the electron Bernstein wave (EBW) with O-mode launch. For a given antenna position on C-2 and the fixed 2D plasma density and equilibrium field profiles, simulations have been done for six selected frequencies (2.45 GHz, 5 GHz, 8 GHz, 18 GHz, 28 GHz, and 50 GHz). Launch angles have been optimized for each case in order to achieve high coupling efficiencies to the EBW by the O-X-B mode conversion process and high power deposition. Results show that among those six frequencies, the case of 8 GHz is the most promising scenario, which has both high mode conversion efficiency (90%) and the relatively deeper power deposition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The Dependence of the Fraction of Radio Luminous Quasars on Redshift and its Theoretical Implications

While radio emission in quasars can be contributed to by a variety of processes (involving star-forming regions, accretion disk coronas and winds, and jets), the powering of the radio loudest quasars must involve very strong jets, presumably launched by the Blandford–Znajek mechanism incorporating the magnetically arrested disk (MAD) scenario. Here, we focus on the latter and investigate the dependence of their fraction on redshift. We also examine the dependence of the radio-loud fraction (RLF) on BH mass ( M BH ) and Eddington ratio (λ Edd ), while excluding the redshift bias by narrowing its range. In both of these investigations, we remove the bias associated with: (1) the diversity of source selection by constructing two well-defined, homogeneous samples of quasars (first within 0.7 ≤ z ≤ 1.9, second within 0.5 ≤ z ≤ 0.7); and (2) a strong drop in the RLF of quasars at smaller BH masses by choosing those with BH masses larger than 10 8.5 M ⊙ . We confirm some of the previous results showing the increase in the fraction of radio-loud quasars with cosmic time and that this trend can be even steeper if we account for the bias introduced by the dependence of the RLF on BH mass, whereas the bias introduced by the dependence of the RLF on Eddington ratio is shown to be negligible. Assuming that quasar activities are triggered by galaxy mergers, we argue that such an increase can result from the slower drop with cosmic time of mixed mergers than of wet mergers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

MSD CoP Webinar: "Advances in MSD-LIVE to Support the MSD Community of Practice"

Context: This webinar was hosted by the MultiSector Dynamics Community of Practice (MSD CoP; https://multisectordynamics.org). Advances in MSD-LIVE to Support the MSD Community of Practice Presenters: Casey Burleyson and Zoe Guillen (Pacific Northwest National Laboratory) Abstract: The MultiSector Dynamics Living, Intuitive, Value-adding, Environment (MSD-LIVE; msdlive.org) is a cloud-based data management system and advanced computing platform that enables MSD researchers to document and archive their data, run their models and analysis tools, and share their data, software, and workflows within the MSD Community of Practice. Recently, several high-profile datasets have attracted many new users to MSD-LIVE. This webinar has two goals: 1) To refamiliarize the MSD community and new users with the components of the platform (e.g., the data repository, model training notebooks, and data dashboards) and to highlight examples of how these components are advancing MSD science and 2) To demonstrate new features in v3 of the platform, released in late 2025. The main new feature in v3 is the ability to interactively explore data in MSD-LIVE without downloading it. MSD-LIVE users can now click a button in our data repository and launch a blank Jupyter notebook with access to the underlying data on AWS. Users can use the notebook to write analysis, visualization, or subsetting routines that process the data directly on the AWS cloud. We also added a GitHub integration feature that allows users to share analysis or visualization code they develop with the community of MSD-LIVE users. The webinar will wrap up with a look at what's coming next for MSD-LIVE in 2026. Moderator: Patrick M. Reed (MSD CoP Facilitation Team) This webinar was held on: May 12th, 2026 from 1-2 PM EST.

Open Science↗
NASA NTRS1973

The Nimbus 5 data catalog. Volume 1: Data orbits 104 through 693, 19 December 1972 - 31 January 1973

Nimbus 5 was successfully launched from the Western Test Range at Vandenburg AFB, California, into a near circular orbit (1089 km x 1102 km) at 07 hr 56 min 00 sec GMT on 11 December 1972. All experiments and subsystems were successfully turned on. Satellite operations from launch (11 December) through orbit 103 (18 December) consisted of engineering evaluation of all spacecraft systems. As a result of that effort, data reception, accountability, and processing were intermittent during that period. Therefore, this catalog reflects documentation from orbit 104 (19 December 1972) through orbit 693 (31 January 1973). The pitch bias history, surface composition mapping radiometer, and infrared temperature profile radiometer are discussed.

Source record↗
NASA NTRS1974

The first earth resources technology satellite /ERTS 1/

The present work describes the ERTS 1 spacecraft and data collection system and reviews the operation of the system since the satellite was launched in July, 1972. Perhaps the most significant result of the ERTS 1 mission is the realization that features related to land resources or to environmental processes can be mapped synoptically for very large areas on scales up to 1:250,000 without substantial loss of definition. Examples of color composite images obtained by ERTS 1 are shown.

Nordberg, W.↗
NASA NTRS1981

A rocket-borne microprocessor-based experiment for investigation of energetic particles in the D and E regions

An energetic experiment using the Z80 family of microcomputer components is described. Data collected from the experiment allowed fast and efficient postprocessing, yielding both energy-spectrum and pitch-angle distribution of energetic particles in the D and E regions. Advanced microprocessor system architecture and software concepts were used in the design to cope with the large amount of data being processed. This required the Z80 system to operate at over 80% of its total capacity. The microprocessor system was included in the payloads of three rockets launched during the Energy Budget Campaign at ESRANGE, Kiruna, Sweden in November 1980. Based on preliminary examination of the data, the performance of the experiment was satisfactory and good data were obtained on the energy spectrum and pitch-angle distribution of the particles.

Braswell, F. M.↗
NASA NTRS1983

Irrigated lands: Monitoring by remote sensing

The use of remote sensing for irrigated areas, especially in the region of Guaira, Brazil (state of Sao Paulo), is examined. Major principles of utilizing LANDSAT data for the detection and mapping of irrigated lands are discussed. In addition, initial results obtained by computer processing of digital data, use of MSS (Multispectral Scanner System)/LANDSAT products, and the availability of new remote sensing products are highlighted. Future activities include the launching of the TM (Thematic Mapper)/LANDSAT 4 with 30 meters of resolution and SPOT (Systeme Probatorie d'Observation de la Terre) with 10 to 20 meters of resolution, to be operational in 1984 and 1986 respectively.

Epiphanio, J. C. N.↗
NASA NTRS1986

Earth observing system - Concepts and implementation strategy

The concepts of an Earth Observing System (EOS), an information system being developed by the EOS Science and Mission Requirements Working Group for international use and planned to begin in the 1990s, are discussed. The EOS is designed to study the factors that control the earth's hydrologic cycle, biochemical cycles, and climatologic processes by combining the measurements from remote sensing instruments, in situ measurement devices, and a data and information system. Three EOS platforms are planned to be launched into low, polar, sun-synchronous orbits during the Space Station's Initial Operating Configuration, one to be provided by ESA and two by the United States.

Hartle, R. E.↗
NASA NTRS1992

First Lunar Outpost Earth to orbit concepts and issues

The topics are presented in viewgraph form and include the following: (1) mission design choices - implications to a heavy-lift launch vehicle (HLLV); (2) Space Exploration Initiative (SEI) reference launch vehicles; (3) lunar mission profile; (4) Saturn 5 derived HLLV with 2 liquid oxygen (LOX)/RP boosters; (5) National Launch System (NLS) derived HLLV with 4 LOX/RP boosters; (6) first lunar outpost mission performance; (7) future trade studies; and (8) the first lunar outpost definition process.

Gene Austin↗
NASA NTRS1993

Neighboring suboptimal control for vehicle guidance

The neighboring optimal feedback control law is developed for systems with a piecewise linear control for the case where the optimal control is obtained by nonlinear programming techniques. To develop the control perturbation for a given deviation from the nominal path, the second variation is minimized subject to the constraint that the final conditions be satisfied (neighboring suboptimal control). This process leads to a feedback relationship between the control perturbation and the measured deviation from the nominal state. Neighboring suboptimal control is applied to the lunar launch problem. Two approaches, single optimization and multiple optimization for calculating the gains are used, and the gains are tested in a guidance simulation with a mismatch in the acceleration of gravity. Both approaches give acceptable results, but multiple optimization keeps the perturbed path closer to the nominal path.

Hull, David G.↗
NASA NTRS1993

Lunar lander and return propulsion system trade study

This trade study was initiated at NASA/JSC in May 1992 to develop and evaluate main propulsion system alternatives to the reference First Lunar Outpost (FLO) lander and return-stage transportation system concept. Thirteen alternative configurations were developed to explore the impacts of various combinations of return stage propellants, using either pressure or pump-fed propulsion systems and various staging options. Besides two-stage vehicle concepts, the merits of single-stage and stage-and-a-half options were also assessed in combination with high-performance liquid oxygen and liquid hydrogen propellants. Configurations using an integrated modular cryogenic engine were developed to assess potential improvements in packaging efficiency, mass performance, and system reliability compared to non-modular cryogenic designs. The selection process to evaluate the various designs was the analytic hierarchy process. The trade study showed that a pressure-fed MMH/N2O4 return stage and RL10-based lander stage is the best option for a 1999 launch. While results of this study are tailored to FLO needs, the design date, criteria, and selection methodology are applicable to the design of other crewed lunar landing and return vehicles.

Hurlbert, Eric A.↗
NASA NTRS1994

The meteorological monitoring system for the Kennedy Space Center/Cape Canaveral Air Station

The Kennedy Space Center (KSC) and Cape Canaveral Air Station (CCAS) are involved in many weather-sensitive operations. Manned and unmanned vehicle launches, which occur several times each year, are obvious example of operations whose success and safety are dependent upon favorable meteorological conditions. Other operations involving NASA, Air Force, and contractor personnel, including daily operations to maintain facilities, refurbish launch structures, prepare vehicles for launch, and handle hazardous materials, are less publicized but are no less weather-sensitive. The Meteorological Monitoring System (MMS) is a computer network which acquires, processes, disseminates, and monitors near real-time and forecast meteorological information to assist operational personnel and weather forecasters with the task of minimizing the risk to personnel, materials, and the surrounding population. CLIPS has been integrated into the MMS to provide quality control analysis and data monitoring. This paper describes aspects of the MMS relevant to CLIPS including requirements, actual implementation details, and results of performance testing.

Dianic, Allan V.↗
NASA NTRS1993

Neighboring suboptimal control for vehicle guidance

The neighboring optimal feedback control law is developed for systems with a piecewise linear control for the case where the optimal control is obtained by nonlinear programming techniques. To develop the control perturbation for a given deviation from the nominal path, the second variation is minimized subject to the constraint that the final conditions be satisfied (neighboring suboptimal control). This process leads to a feedback relationship between the control perturbation and the measured deviation from the nominal state. Neighboring suboptimal control is applied to the lunar launch problem. Two approaches, single optimization and multiple optimization, for calculating the gains are used, and the gains are tested in a guidance simulation with a mismatch in the acceleration of gravity. Both approaches give acceptable results, but multiple optimization keeps the perturbed path closer to the nominal path.

Hull, David G.↗
NASA NTRS1999

Metals for Cryotank Structures. Present and Future: MSFC Perspective

The Cryogenic Tank Technology Program (CTTP) program has been a cooperative effort between NASA LARC, NASA MSFC, NASA Headquarters, and industry (Lockheed Martin Aeronautics, Lockheed Martin Manned Space Systems, Wyman Gordon, and Ladish). The scope of the CTTP is to develop state-of-the-art, flight-size, flight-quality, low cost hardware, and use this hardware to design, fabricate and test an all aluminum-lithium, all near net shape-component 14' diameter cryogenic tank with a unique low profile bulkhead design. The logical conclusion to the CTTP is to validate these various technologies to a Technology Readiness Level (TRL) of 6 through the proposed structural test program. The CTTP supports the advancement of key enabling technologies required for aluminum lithium cryogenic tanks. The technologies are focused towards innovative and low cost manufacturing processes such as near net shape technologies: one piece spun formed domes, extruded barrel panels, and one piece roll forged ring frames. Other innovative technologies include the friction stir weld process and weight-efficient low profile bulkhead designs. All of these technologies are of primary importance for NASA's mission plan for reusable and expendable launch vehicles. This program fills the niche for an all 2195 aluminum lithium alloy cryogenic tank which is not being covered by existing NASA technology work.

Vaughn, Timothy P.↗
NASA NTRS2003

Reliable Transport over SpaceWire for James Webb Space Telescope (JWST) Focal Plane Electronics (FPE) Network

NASA's James Webb Space Telescope (JWST) faces difficult technical and budgetary challenges to overcome before it is scheduled launch in 2010. The Integrated Science Instrument Module (ISIM), shares these challenges. The major challenge addressed in this paper is the data network used to collect, process, compresses and store Infrared data. A total of 114 Mbps of raw information must be collected from 19 sources and delivered to the two redundant data processing units across a twenty meter deployed thermally restricted interface. Further data must be transferred to the solid-state recorder and the spacecraft. The JWST detectors are kept at cryogenic temperatures to obtain the sensitivity necessary to measure faint energy sources. The Focal Plane Electronics (FPE) that sample the detector, generate packets from the samples, and transmit these packets to the processing electronics must dissipate little power in order to help keep the detectors at these cold temperatures. Separating the low powered front-end electronics from the higher-powered processing electronics, and using a simple high-speed protocol to transmit the detector data minimize the power dissipation near the detectors. Low Voltage Differential Signaling (LVDS) drivers were considered an obvious choice for physical layer because of their high speed and low power. The mechanical restriction on the number cables across the thermal interface force the Image packets to be concentrated upon two high-speed links. These links connect the many image packet sources, Focal Plane Electronics (FPE), located near the cryogenic detectors to the processing electronics on the spacecraft structure. From 12 to 10,000 seconds of raw data are processed to make up an image, various algorithms integrate the pixel data Loss of commands to configure the detectors as well as the loss of science data itself may cause inefficiency in the use of the telescope that are unacceptable given the high cost of the observatory. This combination of requirements necessitates a redundant, fault tolerant, high- speed, low mass, low power network with a low Bit error Rate(1E-9- 1E-12). The ISIM systems team performed many studies of the various network architectures that meeting these requirements. The architecture selected uses the Spacewire protocol, with the addition of a new transport and network layer added to implement end-to-end reliable transport. The network and reliable transport mechanism must be implemented in hardware because of the high average information rate and the restriction on the ability of the detectors to buffer data due to power and size restrictions. This network and transport mechanism was designed to be compatible with existing Spacewire links and routers so that existing equipment and designs may be leveraged upon. The transport layer specification is being coordinated with European Space Agency (ESA), Spacewire Working Group and the Consultative Committee for Space Data System (CCSDS) PlK Standard Onboard Interface (SOIF) panel, with the intent of developing a standard for reliable transport for Spacewire. Changes to the protocol presented are likely since negotiations are ongoing with these groups. A block of RTL VHDL that implements a multi-port Spacewire router with an external user interface will be developed and integrated with an existing Spacewire Link design. The external user interface will be the local interface that sources and sinks packets onto and off of the network (Figure 3). The external user interface implements the network and transport layer and handles acknowledgements and re-tries of packets for reliable transport over the network. Because the design is written in RTL, it may be ported to any technology but will initially be targeted to the new Actel Accelerator series (AX) part. Each link will run at 160 Mbps and the power will be about 0.165 Watt per link worst case in the Actel AX.

Rakow, Glenn↗
NASA NTRS2002

Impact of Quikscat Data on Numerical Weather Prediction

One of the important applications of satellite surface wind observations is to increase the accuracy of weather analyses and forecasts. Satellite surface wind data can improve numerical weather prediction (NWP) model forecasts by contributing to improved analyses of the surface wind field and air sea fluxes. Through the data assimilation process,these data can also improve atmospheric mass and motion fields in the free atmosphere above the surface. The SeaWinds scatterometer on the QuikScat satellite was launched in July 1999 and represented a dramatic departure in design from the other scatterometer instruments launched during the past decade (ERS-1,2 and NSCAT). The NASA Data Assimilation Office (DAO) was the first data assimilation center to assimilate QuikScat Seawinds data and evaluate their impact on numerical weather prediction. Following the launch of QuikScat, a detailed evaluation of the initial surface wind data sets was performed as part of a collaborative project between the Environmental Modeling Center of NCEP, NESDIS and the DAO. More recently, the impact of Quikscat data was evaluated in detailed experiments using the NCEP operational data assimilation system. As a result of the beneficial impact obtained, NCEP began operational utilization of Quikscat data. Results from these experiments as well as recent DAO assimilation experiments showing the impact of Quikscat data on stratospheric analyses and forecasts will be presented at the meeting.

Atlas, Robert↗
NASA NTRS1999

Welcome to NASA's Earth Science Enterprise: Educational CD-ROM Activity Supplement

Since its inception in 1958, NASA has been studying the Earth and its changing environment by observing the atmosphere, oceans, land, ice, and snow, and their influence on weather and climate. We now understand that the key to gaining a better understanding of the global environment is exploring how the Earth's systems of air, land, water, and life interact with each other. This approach-called Earth Systems Science-blends together fields like meteorology, oceanography, geology, and biology. In 1991, NASA launched a more comprehensive program to study the Earth as an integrated environmental system. They call it NASA's Earth Science Enterprise. A major component of the Earth Science Enterprise is the Earth Observing System (EOS). EOS is series of satellites to be launched over the next two decades that will be used to intensively study the Earth, with the hopes of expanding our under- standing of how natural processes affect us, and how we might be affecting them. Such studies will yield improved weather forecasts, tools for managing agriculture and forests, information for fishermen and local planners, and, eventually, the ability to predict how the climate will change in the future. Today's program is laying the foundation for long-term environmental and climate monitoring and prediction. Potentially, this will provide the understanding needed in the future to support difficult decisions regarding the Earth's environment.

Source record↗
NASA NTRS2003

Time-Variable Gravity from Space: Quarter Century of Observations, Mysteries, and Prospects

Any large mass transport in the Earth system produces changes in the gravity field. Via the space geodetic technique of satellite-laser ranging in the last quarter century, the Earth s dynamic oblateness J2 (the lowest-degree harmonic component of the gravity field) has been observed to undergo a slight decrease - until around 1998, when it switched quite suddenly to an increase trend which has continued to date. The secular decrease in J2 has long been attributed primarily to the post-glacial rebound in the mantle; the present increase signifies an even larger change in global mass distribution whose J2 effect overshadows that of the post-glacial rebound, at least over interannual timescales. Intriguing evidences have been found in the ocean water distribution, especially in the extratropical Pacific basins, that may be responsible for this 52 change. New techniques based on satellite-to-satellite tracking will yield greatly improved observations for time-variable gravity, with much higher precision and spatial resolution @e., much higher harmonic degrees). The most important example is the GRACE mission launched in March 2002, following the success of the CHAMP mission. Such observations are becoming a new and powerful tool for remote sensing of geophysical fluid processes that involve larger-scale mass transports.

Chao, Benjamin F.↗

Refine your search to explore more results.