Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC CORES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

MEASUREMENT OF LOW SIGNAL-TO-NOISE RATIO SOLAR p-MODES IN SPATIALLY RESOLVED HELIOSEISMIC DATA

We present an adaptation of the rotation-corrected, m-averaged spectrum technique designed to observe low signal-to-noise ratio (S/N), low-frequency solar p-modes. The frequency shift of each of the 2l + 1 m spectra of a given (n, l) multiplet is chosen that maximizes the likelihood of the m-averaged spectrum. A high S/N can result from combining individual low S/N, individual-m spectra, none of which would yield a strong enough peak to measure. We apply the technique to Global Oscillation Network Group and Michelson Doppler Imager data and show that it allows us to measure modes with lower frequencies than those obtained with classic peak-fitting analysis of the individual-m spectra. We measure their central frequencies, splittings, asymmetries, lifetimes, and amplitudes. The low frequency, low- and intermediate-angular degrees rendered accessible by this new method correspond to modes that are sensitive to the deep solar interior down to the core (l {<=} 3) and to the radiative interior (4 {<=} l {<=} 35). Moreover, the low-frequency modes have deeper upper turning points, and are thus less sensitive to the turbulence and magnetic fields of the outer layers, as well as uncertainties in the nature of the external boundary condition. As a result of their longer lifetimes (narrower linewidths) at the same S/N the determination of the frequencies of lower frequency modes is more accurate, and the resulting inversions should be more precise.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELING MULTI-WAVELENGTH PULSE PROFILES OF THE MILLISECOND PULSAR PSR B1821–24

PSR B1821–24 is a solitary millisecond pulsar that radiates multi-wavelength pulsed photons. It has complex radio, X-ray, and γ-ray pulse profiles with distinct peak phase separations that challenge the traditional caustic emission models. Using the single-pole annular gap model with a suitable magnetic inclination angle (α = 40°) and viewing angle (ζ = 75°), we managed to reproduce its pulse profiles of three wavebands. It is found that the middle radio peak originated from the core gap region at high altitudes, and the other two radio peaks originated from the annular gap region at relatively low altitudes. Two peaks of both X-ray and γ-ray wavebands basically originated from the annular gap region, while the γ-ray emission generated from the core gap region contributes somewhat to the first γ-ray peak. Precisely reproducing the multi-wavelength pulse profiles of PSR B1821–24 enables us to understand emission regions of distinct wavebands and justify pulsar emission models.

79 ASTRONOMY AND ASTROPHYSICS↗

TEMPERATURE ANISOTROPY IN THE PRESENCE OF ULTRA LOW FREQUENCY WAVES IN THE TERRESTRIAL FORESHOCK

We report the first study of the correlation between elevated solar wind core plasma temperatures and temperature anisotropy in the terrestrial foreshock. Plasma temperature is enhanced near the fire hose marginal stability threshold in the presence of ultra low frequency (ULF) large amplitude magnetic perturbations, which are intrinsically right-hand circularly polarized. Direct comparison of contemporaneous anisotropic temperatures in the upstream solar wind and the foreshock suggests that the net heating of plasma is mediated via increase of the parallel temperature in the foreshock region where the ULF waves are present. We consider the possibility that a mechanism based on Landau damping, where solar wind plasma temperature parallel to the background magnetic field is increased by interaction with oblique compressible fast magneto-acoustic ULF waves, influences temperature anisotropy.

79 ASTRONOMY AND ASTROPHYSICS↗

Unraveling higher-order contributions to spin excitations probed using resonant inelastic x-ray scattering

Resonant inelastic x-ray scattering (RIXS) is an evolving tool for investigating the spin dynamics of strongly correlated materials, which complements inelastic neutron scattering. In isotropic spin-$\frac{1}{2}$ Heisenberg antiferromagnetic (HAFM) spin chains, both techniques have observed non-spin-conserving (NSC) excitations confined to the two-spinon phase space. However, a recent O K-edge RIXS study of the one-dimensional HAFM Sr 2 CuO 3 observed spin-conserving (SC) four-spinon excitations outside the two-spinon phase space. Here, we demonstrate that analogous four-spinon excitations can also be accessed at the Cu L 3 edge in the related material SrCuO 2 . Through detailed modeling, we establish that these excitations appear in both the SC and NSC channels of the Cu L 3 edge, and are only captured by higher-order terms in the ultrashort core-hole lifetime expansion. Finally, since these terms encode information about spin-spin correlations extending beyond nearest neighbors, our results offer different possibilities for studying nonlocal spin correlations in quantum magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indigo: A Domain-Specific Language for Fast, Portable Image Reconstruction

© 2018 IEEE. Linear operators used in iterative methods like conjugate gradient have typically been implemented either as ''matrix-driven'' subroutines backed by explicit sparse or dense matrices, or as ''matrix-free'' subroutines that implement specific linear operations directly (e.g. FFTs). The matrix-driven approach is generally more portable because it can target widely-Available BLAS libraries, but it can be inefficient in terms of time and space complexity. In contrast, the matrix-free approach is more performant because it leverages structure in operations, but it requires each operator be re-implemented on each new platform. To increase performance and portability, we propose a hybrid approach that represents linear operators as expression trees. Leaf nodes in the tree are either matrix-free or matrix-driven operators, and interior nodes represent mathematical compositions (sums, products, transposes) or structural compositions (stacks, block diagonals, etc.) of the leaf operators. This representation enables expert-guided reordering and fusion transformations that can improve performance or reduce memory pressure. We implement our approach in a domain-specific language called Indigo. We assess Indigo on image reconstruction problems arising in four application areas: magnetic resonance imaging, ptychography, magnetic particle imaging, and fluorescent microscopy. We give performance results from vendor BLAS libraries, and we introduce specializations to Sparse BLAS routines that achieve near-Roofline performance on multi-core, many-core, and GPU systems.

Driscoll, Michael↗

Solvent Influence on the Magnetization and Phase of Fe-Ni Alloy Nanoparticles Generated by Laser Ablation in Liquids

The synthesis of bimetallic iron-nickel nanoparticles with control over the synthesized phases, particle size, surface chemistry, and oxidation level remains a challenge that limits the application of these nanoparticles. Pulsed laser ablation in liquid allows the properties tuning of the generated nanoparticles by changing the ablation solvent. Organic solvents such as acetone can minimize nanoparticle oxidation. Yet, economical laboratory and technical grade solvents that allow cost-effective production of FeNi nanoparticles contain water impurities, which are a potential source of oxidation. Here, we investigated the influence of water impurities in acetone on the properties of FeNi nanoparticles generated by pulsed laser ablation in liquids. To remove water impurities and produce “dried acetone”, cost-effective and reusable molecular sieves (3 Å) are employed. The results show that the Fe50Ni50 nanoparticles’ properties are influenced by the water content of the solvent. The metastable HCP FeNi phase is found in NPs prepared in acetone, while only the FCC phase is observed in NPs formed in water. Mössbauer spectroscopy revealed that the FeNi nanoparticles oxidation in dried acetone is reduced by 8% compared to acetone. The high-field magnetization of Fe50Ni50 nanoparticles in water is the highest, 68 Am2/kg, followed by the nanoparticles obtained after ablation in acetone without water impurities, 59 Am2/kg, and acetone, 52 Am2/kg. The core-shell structures formed in these three liquids are also distinctive, demonstrating that a core-shell structure with an outer oxide layer is formed in water, while carbon external layers are obtained in acetone without water impurity. The results confirm that the size, structure, phase, and oxidation of FeNi nanoparticles produced by pulsed laser ablation in liquids can be modified by changing the solvent or just reducing the water impurities in the organic solvent.

36 MATERIALS SCIENCE↗

PLANETESIMAL AND PROTOPLANET DYNAMICS IN A TURBULENT PROTOPLANETARY DISK: IDEAL UNSTRATIFIED DISKS

The dynamics of planetesimals and planetary cores may be strongly influenced by density perturbations driven by magneto-rotational turbulence in their natal protoplanetary gas disks. Using the local shearing box approximation, we perform numerical simulations of planetesimals moving as massless particles in a turbulent, magnetized, unstratified gas disk. Our fiducial disk model shows turbulent accretion characterized by a Shakura-Sunyaev viscosity parameter of alpha approx 10{sup -2}, with rms density perturbations of approx10%. We measure the statistical evolution of particle orbital properties in our simulations including mean radius, eccentricity, and velocity dispersion. We confirm random walk growth in time of all three properties, the first time that this has been done with direct orbital integration in a local model. We find that the growth rate increases with the box size used at least up to boxes of eight scale heights in horizontal size. However, even our largest boxes show velocity dispersions sufficiently low that collisional destruction of planetesimals should be unimportant in the inner disk throughout its lifetime. Our direct integrations agree with earlier torque measurements showing that type I migration dominates over diffusive migration by stochastic torques for most objects in the planetary core and terrestrial planet mass range. Diffusive migration remains important for objects in the mass range of kilometer-sized planetesimals. Discrepancies in the derived magnitude of turbulence between local and global simulations of magneto-rotationally unstable disks remains an open issue, with important consequences for planet formation scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗

ANGULAR MOMENTUM TRANSPORT IN SOLAR-TYPE STARS: TESTING THE TIMESCALE FOR CORE-ENVELOPE COUPLING

We critically examine the constraints on internal angular momentum transport which can be inferred from the spin-down of open cluster stars. The rotation distribution inferred from rotation velocities and periods is consistent for larger and more recent samples, but smaller samples of rotation periods appear biased toward shorter periods relative to vsin i studies. We therefore focus on whether the rotation period distributions observed in star forming regions can be evolved into the observed ones in the Pleiades, NGC 2516, M 34, M 35, M 37, and M 50 with plausible assumptions about star-disk coupling and angular momentum loss from magnetized solar-like winds. Solid-body (SB) models are consistent with the data for low-mass fully convective stars but highly inconsistent for higher mass stars where the surface convection zone can decouple for angular momentum purposes from the radiative interior. The Tayler-Spruit magnetic angular momentum transport mechanism, commonly employed in models of high-mass stars, predicts SB rotation on extremely short timescales of less than 1 Myr and is therefore unlikely to operate in solar-type pre-main-sequence (pre-MS) and MS stars at the predicted rate. Models with core-envelope decoupling can explain the spin-down of 1.0 and 0.8 solar mass slow rotators with characteristic coupling timescales of 55 {+-} 25 Myr and 175 {+-} 25 Myr, respectively. The upper envelope of the rotation distribution is more strongly coupled than the lower envelope of the rotation distribution, in accord with theoretical predictions that the angular momentum transport timescale should be shorter for more rapidly rotating stars. Constraints imposed by the solar rotation curve are also discussed. We argue that neither hydrodynamic mechanisms nor our revised and less efficient prescription for the Tayler-Spruit dynamo can reproduce both spin-down and the internal solar rotation profile by themselves. It is likely that a successful model of angular momentum evolution will involve more than one mechanism. Further observational studies, especially of clusters younger than 100 Myr, will provide important additional constraints on the internal rotation of stars and could firmly rule out or confirm the operation of major classes of theoretical mechanisms.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved-confinement plasmas at high temperature and high beta in the MST RFP

We have increased substantially the electron and ion temperatures, the electron density, and the total beta in plasmas with improved energy confinement in the Madison Symmetric Torus (MST). The improved confinement is achieved with a well-established current profile control technique for reduction of magnetic tearing and reconnection. A sustained ion temperature > 1 keV is achieved with intensified reconnection-based ion heating followed immediately by current profile control. In the same plasmas, the electron temperature reaches 2 keV, and the electron thermal diffusivity drops to about 2 m(2) s(-1). The global energy confinement time is 12 ms. This and the reported temperatures are the largest values yet achieved in the reversed-field pinch (RFP). These results were attained at a density similar to 10(19) m(-3). By combining pellet injection with current profile control, the density has been quadrupled, and total beta has nearly doubled to a record value of about 26%. The Mercier criterion is exceeded in the plasma core, and both pressure-driven interchange and pressure-driven tearing modes are calculated to be linearly unstable, yet energy confinement is still improved. Transient momentum injection with biased probes reveals that global momentum transport is reduced with current profile control. Magnetic reconnection events drive rapid momentum transport related to large Maxwell and Reynolds stresses. Ion heating during reconnection events occurs globally, locally, or not at all, depending on which tearing modes are involved in the reconnection. To potentially augment inductive current profile control, we are conducting initial tests of current drive with lower-hybrid and electron-Bernstein waves.

Chapman, B. E.↗

Contribution of individual interfaces in the MgO/Co/Pd trilayer to perpendicular magnetic anisotropy upon annealing

The contribution of each interface of the MgO/Co/Pd trilayer to the perpendicular magnetic anisotropy (PMA) was studied by changing chemical and crystalline structures through annealing. We found that volumetric anisotropy in the MgO/Co/Pd trilayer was significantly increased due to enhanced magnetoelastic anisotropy caused by stress built up most likely at the MgO/Co interface during annealing. When the trilayer was annealed at 400 °C, the alloy formation at the Co/Pd interface additionally increased the volumetric anisotropy. Our x-ray magnetic circular dichroism study supported that those structural modifications led to an increase in the orbital moment through spin-orbit coupling (SOC) along the film normal two times larger than that of the as-deposited trilayer, thereby enhancing PMA greatly. Our experimental results prove that the Co/Pd interface, rather than the MgO/Co interface, plays an essential role in inducing strong PMA in the trilayer. The precise investigation of annealing effect on both volumetric and interfacial anisotropies can provide a methodological solution to improve the SOC of the trilayer that can serve as the core unit of spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the origin of a sunquake during the 2014 March 29 X1 flare

Helioseismic data from the Helioseismic Magnetic Imager instrument have revealed a sunquake associated with the X1 flare SOL2014-03-29T17:48 in active region NOAA 12017. We try to discover if acoustic-like impulses or actions of the Lorentz force caused the sunquake. We analyze spectropolarimetric data obtained with the Facility Infrared Spectrometer (FIRS) at the Dunn Solar Telescope (DST). Fortunately, the FIRS slit crossed the flare kernel close to the acoustic source during the impulsive phase. The infrared FIRS data remain unsaturated throughout the flare. Stokes profiles of lines of Si I 1082.7 nm and He I 1083.0 nm are analyzed. At the flare footpoint, the Si I 1082.7 nm core intensity increases by a factor of several, and the IR continuum increases by 4% ± 1%. Remarkably, the Si I core resembles the classical Ca II K line's self-reversed profile. With nLTE radiative models of H, C, Si, and Fe, these properties set the penetration depth of flare heating to 100 ± 100 km (i.e., photospheric layers). Estimates of the non-magnetic energy flux are at least a factor of two less than the sunquake energy flux. Milne-Eddington inversions of the Si I line show that the local magnetic energy changes are also too small to drive the acoustic pulse. Our work raises several questions. Have we missed the signature of downward energy propagation? Is it intermittent in time and/or non-local? Does the 1-2 s photospheric radiative damping time discount compressive modes?.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure of odd Ge isotopes with 40 < N < 50

We have interpreted recentlymeasured experimental data of {sup 77}Ge, and also for {sup 73,75,79,81}Ge isotopes in terms of state-of-the-art shell-model calculations. Excitation energies, B(2) values, quadrupole moments and magnetic moments are compared with experimental data when available. The calculations have been performed with the recently derived interactions, namely with JUN45 and jj44b for f{sub 5/2pg9/2} space. We have also performed calculation for fpg{sub 9/2} valence space using an fpg effective interaction with {sup 48}Ca core and imposing a truncation to study the importance of the proton excitations across the Z = 28 shell in this region. The predicted results of jj44b interaction are in good agreement with experimental data.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nanocomposite Magnetic Technology for High Frequency MW Scale Power Conversion

The purpose of this project was to demonstrate the use of advanced magnetic materials in a medium voltage DC-DC converter for photovoltaic applications. The lead, alloy development team met project development milestones targeting a low loss material (<20 W/kg at 10kHzT), alloy resistivity (>150μΩcm amorphous phase resistivity), evaluation of the operational lifetime of the material (continuous operation above 155C), and the performance metric (power ratio >100) for a new class of Co-rich alloys with tunable permeability. Material manufacturability was demonstrated in continuously casting over 5 kg batches of 1’’ width, 18μm thickness (less than 80-120% deviation), amorphous ribbon, and processing including field and strain annealing as well as rolling both Fe and Co based alloys to less the 15μm was achieved. Parallel technology to markets efforts found that while a more compact and more efficient converter, which reduces the balance of plant cost, would enjoy a $0.10/W premium over current technology. Due to uncertainty in future energy policy and barriers to market entry the technology to market analyses recommended partnering with an existing manufacturer. The industrial and transportation electric motor market was also identified as one standing to benefit from this material technology and key personnel within this market were identified. With the assistance of Dynapower the converter prototype was tested to 300 VDC (18 kVA) before the resonant capacitors failed. The prototype incorporated several subsystems including the passive and active components at the engineering scale and exposed at least one weak point in the prototype. Independent testing on the core materials predicts that the core would have met the operating specifications, but this component was not tested at nominal power. Based on this prediction and the demonstrated construction of the prototype core, we recommend that the core material is designated TRL 5. The CMU team is currently working with Eaton to identify opportunities further test cores in inductive components.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A NARROW SHORT-DURATION GRB JET FROM A WIDE CENTRAL ENGINE

We use two-dimensional relativistic hydrodynamic numerical calculations to show that highly collimated relativistic jets can be produced in neutron star merger models of short-duration gamma-ray bursts (GRBs) without the need for a highly directed engine or a large net magnetic flux. Even a hydrodynamic engine generating a very wide sustained outflow on small scales can, in principle, produce a highly collimated relativistic jet, facilitated by a dense surrounding medium that provides a cocoon surrounding the jet core. An oblate geometry to the surrounding gas significantly enhances the collimation process. Previous numerical simulations have shown that the merger of two neutron stars produces an oblate, expanding cloud of dynamical ejecta. We show that this gas can efficiently collimate the central engine power much like the surrounding star does in long-duration GRB models. For typical short-duration GRB central engine parameters, we find jets with opening angles of an order of 10° in which a large fraction of the total outflow power of the central engine resides in highly relativistic material. These results predict large differences in the opening angles of outflows from binary neutron star mergers versus neutron star–black hole mergers.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhancing easy-plane anisotropy in bespoke Ni(II) quantum magnets

We examine the crystal structures and magnetic properties of several S = 1 Ni(II) coordination compounds, molecules and polymers, that include the bridging ligands HF 2 - , A F 6 2- ( A = Ti, Zr) and pyrazine or non-bridging ligands F - , SiF 6 2- , glycine, H 2 O, 1-vinylimidazole, 4-methylpyrazole and 3-hydroxypyridine. Pseudo-octahedral NiN 4 F 2 , NiN 4 O 2 or NiN 4 OF cores consist of equatorial Ni-N bonds that are equal to or slightly longer than the axial Ni- L ax bonds. By design, the zero-field splitting ( D ) is large in these systems and, in the presence of substantial exchange interactions ( J ), can be difficult to discriminate from magnetometry measurements on powder samples. Thus, we relied on pulsed-field magnetization in those cases and employed electron-spin resonance (ESR) to confirm D when J ← D . The anisotropy of each compound was found to be easy-plane ( D > 0) and range from ≈ 8–25 K. This work reveals a linear correlation between the ratio d (Ni- L ax )/ d (Ni-N eq ) and D although the ligand spectrochemical properties may play an important role. We assert that this relationship allows us to predict the type of magnetocrystalline anisotropy in tailored Ni(II) quantum magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulence and transport in mirror geometries in the Large Plasma Device

Thanks to advances in plasma science and enabling technology, mirror machines are being reconsidered for fusion power plants and as possible fusion volumetric neutron sources. However, cross-field transport and turbulence in mirrors remains relatively understudied compared with toroidal devices. Turbulence and transport in mirror configurations were studied utilizing the flexible magnetic geometry of the Large Plasma Device (LAPD). Multiple mirror ratios from $M=1$ to $M=2.68$ and three mirror-cell lengths from $L=3.51$ to $L=10.86$ m were examined. Langmuir and magnetic probes were used to measure profiles of density, temperature, potential and magnetic field. The electric field-fluctuation-driven ${\tilde {\boldsymbol{E}}} \times {\boldsymbol{B}}$ particle flux, where $\boldsymbol{B}$ is the background field, was calculated from these quantities. Two probe correlation techniques were used to infer wavenumbers and two-dimensional structure. Cross-field particle flux and density fluctuation power decreased with increased mirror ratio. Core density and temperatures remain similar with mirror ratio, but radial line-integrated density increased. The physical expansion of the plasma in the mirror cell by using a higher field in the source region may have led to reduced density fluctuation power through the increased gradient scale length. This increased scale length reduced the growth rate and saturation level of rotational interchange and drift-like instabilities. Despite the introduction of magnetic curvature, no evidence of mirror-driven instabilities – interchange, velocity space or otherwise – were observed. For curvature-induced interchange, many possible stabilization mechanisms were present, suppressing the visibility of the instability.

Travis, Phil (ORCID:0000000343170432)↗

Energetic particle modes of q = 1 high-order harmonics in tokamak plasmas with monotonic weak magnetic shear

Linear and nonlinear simulations of high-order harmonics q=1 energetic particle modes excited by trapped energetic particles in tokamaks are carried out using kinetic/magnetohydrodynamic hybrid code M3D-K. It is found that with a flat safety factor profile in the core region, the linear growth rate of high-order harmonics (m=n>1) driven by energetic trapped particles can be higher than the m/n=1/1 component. The high m=n>1 modes become more unstable when the pressure of energetic particles becomes higher. Moreover, it is shown that there exist multiple resonant locations satisfying different resonant conditions in the phase space of energetic particles for the high-order harmonics modes, whereas there is only one precessional resonance for the m/n=1/1 harmonics. The fluid nonlinearity reduces the saturation level of the n=1 component, while it hardly affects those of the high n components, especially the modes with m=n=3,4. The frequency of these modes does not chirp significantly, which is different with the typical fishbone driven by trapped particles. Lastly, in addition, the flattening region of energetic particle distribution due to high-order harmonics excitation is wider than that due to m/n=1/1 component, although the m/n=1/1 component has a higher saturation amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MAGNETIC FIELDS AND INFALL MOTIONS IN NGC 1333 IRAS 4

We present single-dish 350 {mu}m dust continuum polarimetry as well as HCN and HCO{sup +} J = 4 {yields} 3 rotational emission spectra obtained on NGC 1333 IRAS 4. The polarimetry indicates a uniform field morphology over a 20'' radius from the peak continuum flux of IRAS 4A, in agreement with models of magnetically supported cloud collapse. The field morphology around IRAS 4B appears to be quite distinct, however, with indications of depolarization observed toward the peak flux of this source. Inverse P Cygni profiles are observed in the HCN J = 4 {yields} 3 line spectra toward IRAS 4A, providing a clear indication of infall gas motions. Taken together, the evidence gathered here appears to support the scenario that IRAS 4A is a cloud core in a critical state of support against gravitational collapse.

79 ASTRONOMY AND ASTROPHYSICS↗

Refine your search to explore more results.