Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multi- Component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Interarea Oscillation Damping Control Using High-Voltage DC Transmission: A Survey

High-voltage, direct current (HVDC) transmission lines are increasingly being installed in power systems around the world, and this trend is expected to continue with advancements in power electronics technology. These advancements are also bringing multi-terminal direct current (MTDC) systems closer to practical application. In addition, the continued deployment of phasor measurement units (PMUs) makes dynamic information about a large power system readily available for highly controllable components, such as HVDC lines. All these trends have increased the appeal of modulating HVDC lines and MTDC systems to provide grid services in addition to bulk power transfers. This paper provides a literature survey of HVDC and MTDC damping controllers for interarea oscillations in large interconnected power systems. The literature shows a progression from theoretical research to practical applications. There are already practical implementations of HVDC modulation for lines in point-to-point configuration, although the modulation of MTDC systems is still in the research stage. As a conclusion, this paper identifies and summarizes open questions that remain to be tackled by researchers and engineers.

Elizondo, Marcelo A. (ORCID:000000026621252X)↗
NASA NTRS1991

Periodic response of multi-disk rotors with bearing clearances

The forced steady state response of a multi-disk rotor system involving a clearance at one of the bearings is determined by using a harmonic balance approach. The impedance method is applied to each of the harmonic steady state components in order to reduce the system to its displacement at the nonlinear bearing support. The results reveal the interrelated roles of the bearing clearance, mass eccentricity and side force in producing dangerous subharmonics. The significant effects of the strong nonlinearity of a bearing clearance are studied as related to the various system parameters. The results show that the approach developed in this study is computationally superior to numerical integration methods in analyzing multi-disk rotor systems with strong nonlinearity.

Kim, Y. B.↗
DOE OSTI2021

Predicting Characteristics of the Water Cycle From Scaling Relationships

Over multi-decadal time scales, assuming that changes in subsurface water storage are negligible, the continental precipitative water flux, P, can be divided into two principal components, Q (run-off, including soil infiltration and groundwater recharge) and ET (evapotranspiration). Taking into account a broadly applied Budyko's phenomenology to describe the relationship of ET/P as a function of PET/P, where PET is the potential evapotranspiration, we propose a theoretical framework for predicting characteristics of the water cycle from scaling relationships. In this framework, the ecosystem net primary productivity is expressed in terms of soil formation and vegetation growth, which is mathematically optimized with respect to the water partitioning, generating directly the value ET/P. Here, the mathematical optimization is based on the general ecological principle that dominant ecosystems tend to be those that, for any given conditions, maximize conversion of atmospheric carbon to biomass. It is shown that application of the results of mathematical optimization to water-limited ecosystems is possible by applying the optimization only to a vegetation covered portion of the surface. For energy-limited ecosystems, the optimization can be applied only to a portion of the precipitation equal to PET, assuming that the remaining P simply runs off. We use theoretical and actual values of plant root fractal dimensionalities, d f , to predict ranges of ET/P as a function of PET/P for 0 ≤ PET/P ≤ 1 and compare with annual and multi-decadal means of ET/P. By comparing the developed approach with a large amount of data collected from the literature, we demonstrate its successful applications to both water- and energy-limited systems.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

The NASA-Goddard Multi-Scale Modeling Framework - Land Information System: Global Land/atmosphere Interaction with Resolved Convection

The present generation of general circulation models (GCM) use parameterized cumulus schemes and run at hydrostatic grid resolutions. To improve the representation of cloud-scale moist processes and landeatmosphere interactions, a global, Multi-scale Modeling Framework (MMF) coupled to the Land Information System (LIS) has been developed at NASA-Goddard Space Flight Center. The MMFeLIS has three components, a finite-volume (fv) GCM (Goddard Earth Observing System Ver. 4, GEOS-4), a 2D cloud-resolving model (Goddard Cumulus Ensemble, GCE), and the LIS, representing the large-scale atmospheric circulation, cloud processes, and land surface processes, respectively. The non-hydrostatic GCE model replaces the single-column cumulus parameterization of fvGCM. The model grid is composed of an array of fvGCM gridcells each with a series of embedded GCE models. A horizontal coupling strategy, GCE4fvGCM4Coupler4LIS, offered significant computational efficiency, with the scalability and I/O capabilities of LIS permitting landeatmosphere interactions at cloud-scale. Global simulations of 2007e2008 and comparisons to observations and reanalysis products were conducted. Using two different versions of the same land surface model but the same initial conditions, divergence in regional, synoptic-scale surface pressure patterns emerged within two weeks. The sensitivity of largescale circulations to land surface model physics revealed significant functional value to using a scalable, multi-model land surface modeling system in global weather and climate prediction.

cumulus schemes↗
DOE OSTI2019

Multi-layer Printing of Complex Antennas Using Aerosol Jet Technology (CRADA NFE-18-07315 Final Report)

This project demonstrated the feasibility of producing multilayer radio-frequency (RF) and microwave-frequency components using aerosol jet additive manufacturing technology. Funded by the U.S. Department of energy, Advanced Manufacturing Office, this effort focused on novel stacked component designs for devices such as antennas, electronic filters, resistive/inductive/capacitive (RLC) components, and transmission lines. Our approach to RF/microwave component fabrication by aerosol jet printing has the potential to reduce component size, improve performance characteristics, and allow devices to be fabricated on non-planar surfaces. Specifically, folded micro-patch antenna designs were fabricated by stacking layers of conductors and dielectrics printed in sequence using Optomec’s aerosol jet technology. ORNL supported the effort by providing design input on printing parameters and characterizing the performance of printed structures. ORNL identified suitable stacked antenna designs, produced finite element models (FEM) in high-frequency simulation software (HFSS), and provided the designs to Optomec for printing. After printing, the devices were tested and characterized at ORNL to determine the frequency response and material characteristics of the printed components. These proof-of-principle devices will provide feedback on printing parameters, optimizations for the FEM models, and a path for more complex multilayer device designs.

42 ENGINEERING↗
NASA NTRS1998

Multi-user, interactive, annotated flow-chart applet

This paper describes a web-based documentation tool that has been developed for use by a team of collaborators who are developing interacting components within a system. It consists of a Java applet in the form of a flow chart with additional test that can be viewed by clicking on the desired component. The text, positions, and linkages of the components may be edited by the user and saved to the server. The concept could easily be applied to other collaborative work. Using the techniques and code segments described here, a programmer should be able to customize a similar applet for his own use in a few days time.

Attenberger, S. E.↗
DOE OSTI2025

Economic Evaluation of Modernization Expenditures for Electric Utility Distribution Systems: A Guide for Utility Regulators

Cost-effectiveness evaluation of potential grid modernization solutions is integral to integrated distribution system planning (IDSP). This report synthesizes and updates prior cost-effectiveness approaches identified by the U.S. Department of Energy for grid modernization investments, incorporating multi-objective decision-making. The structure of the report follows the IDSP process, from identifying objectives and priorities to prioritizing grid solutions. The report details two methods for conducting initial cost-effectiveness screening of individual and interdependent grid components: (1) Lowest Reasonable Cost and (2) Benefit-Cost Analysis. Drawing on solutions that passed the initial cost-effectiveness screen, the utility prioritizes grid solutions based on policy objectives and priorities, regulatory compliance, operational efficiencies, and other factors to develop a portfolio of distribution solutions. The utility uses multi-objective decision-making to assess each proposed expenditure against each objective and respective metric. The utility applies a weighting factor, reflecting the priority ranking of the objective, to the total numerical “score” based on the contribution of the proposed solution to addressing each objective. Ultimately, the utility ranks each expenditure from highest to lowest priority using the final score for each solution as well as its cost. The report includes examples of emerging best practices for states and utilities and a cost-effectiveness process checklist.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Multi-objective optimization with an integrated electromagnetics and beam dynamics workflow

In particle accelerators, RF cavities are used to accelerate charged particle beams to designed high energy for physical applications. In a typical accelerator design, the optimization of RF cavities and the optimization of beam dynamics are carried out in separate studies. For a more general and unrestricted accelerator design, a coupled optimization of the RF cavities and the beam parameters is required. For this coupled optimization problem, we have developed an integrated electromagnetics and beam dynamics workflow management system. Within this system, the geometries for a set of cavity components are first adjusted; the field modes are then computed with an electromagnetics program, and imported into a beam dynamics program for beam dynamics simulation. This workflow is encapsulated into a parallel multi-objective optimizer to achieve the integrated accelerator design optimization. A multi fidelity strategy is developed to improve the speed of the optimizer. Furthermore, this integrated global optimization capability is illustrated using a photoinjector design example and yields an improved design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Collision of Physics and Software in the Monte Carlo Application Toolkit (MCATK)

The topic is presented in a series of slides organized as follows: MCATK overview, development strategy, available algorithms, problem modeling (sources, geometry, data, tallies), parallelism, miscellaneous tools/features, example MCATK application, recent areas of research, and summary and future work. MCATK is a C++ component-based Monte Carlo neutron-gamma transport software library with continuous energy neutron and photon transport. Designed to build specialized applications and to provide new functionality in existing general-purpose Monte Carlo codes like MCNP, it reads ACE formatted nuclear data generated by NJOY. The motivation behind MCATK was to reduce costs. MCATK physics involves continuous energy neutron & gamma transport with multi-temperature treatment, static eigenvalue (k eff and α) algorithms, time-dependent algorithm, and fission chain algorithms. MCATK geometry includes mesh geometries and solid body geometries. MCATK provides verified, unit-test Monte Carlo components, flexibility in Monte Carlo application development, and numerous tools such as geometry and cross section plotters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Multi-Wavelength Based Optical Density Sensor for Autonomous Monitoring of Microalgae

A multi-wavelength based optical density sensor unit was designed, developed, and evaluated to monitor microalgae growth in real time. The system consisted of five main components including (1) laser diode modules as light sources (2) photodiodes as detectors, (3) driver circuit, (4) flow cell and (5) sensor housing temperature controller. The sensor unit was designed to be integrated into any microalgae culture system for both real time and non-real time optical density measurements and algae growth monitoring applications. It was shown that the sensor unit was capable of monitoring the dynamics and physiological changes of the microalgae culture in real-time. Algae biomass concentration was accurately estimated with optical density measurements at 650, 685 and 780 nm wavelengths used by the sensor unit. The sensor unit was able to monitor cell concentration as high as 1.05 g L -1 (1.51x10 8 cells mL -1 ) during the culture growth without any sample preparation for the measurements. Since high cell concentrations do not need to be diluted using the sensor unit, the system has the potential to be used in industrial microalgae cultivation systems for real time monitoring and control applications that can lead to improved resource use efficiency.

09 BIOMASS FUELS↗
DOE OSTI2023

Cost‐benefit assessment framework for robotics‐driven inspection of floating offshore wind farms

Abstract Operations and maintenance (O&M) of floating offshore wind farms (FOWFs) poses various challenges in terms of greater distances from the shore, harsher weather conditions, and restricted mobility options. Robotic systems have the potential to automate some parts of the O&M leading to continuous feature‐rich data acquisition, operational efficiency, along with health and safety improvements. There remains a gap in assessing the techno‐economic feasibility of robotics in the FOWF sector. This paper investigates the costs and benefits of incorporating robotics into the O&M of a FOWF. A bottom‐up cost model is used to estimate the costs for a proposed multi‐robot platform (MRP). The MRP houses unmanned aerial vehicle (UAV) and remotely operated vehicle (ROV) to conduct the inspection of specific FOWF components. Emphasis is laid on the most conducive O&M activities for robotization and the associated technical and cost aspects. The simulation is conducted in Windfarm Operations and Maintenance cost‐Benefit Analysis Tool (WOMBAT), where the metrics of incurred operational expenditure (OPEX) and the inspection time are calculated and compared with those of a baseline case consisting of crew transfer vessels, rope‐access technicians, and divers. Results show that the MRP can reduce the inspection time incurred, but this reduction has dependency on the efficacy of the robotic system and the associated parameterization e.g., cost elements and the inspection rates. Conversely, the increased MRP day rate results in a higher annualized OPEX. Residual risk is calculated to assess the net benefit of incorporating the MRP. Furthermore, sensitivity analysis is conducted to find the key parameters influencing the OPEX and the inspection time variation. A key output of this work is a robust and realistic framework which can be used for the cost‐benefit assessment of future MRP systems for specific FOWF activities.

17 WIND ENERGY↗
DOE OSTI2018

TOPSIS method based on the connection number of set pair analysis under interval-valued intuitionistic fuzzy set environment

The objective of this paper is to focus on multi-attribute decision-making for interval-valued intuitionistic fuzzy set environment based on set pair analysis (SPA). For it, the major component of the SPA known as connection number has been constructed based on the set pairs between two preference values consists of every attribute and ideal pairs of it. Based on these connection numbers, an extension of technique for order of preference by similarity to ideal solution method is developed by combining the proposed connection number for IVIFSs and hence finding the best alternative(s) using relative degree of closeness coefficient. An illustrative example has been given for demonstrating the approach and compares their performance with some existing measures.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

A review of high order strong stability preserving two-derivative explicit, implicit, and IMEX methods

High order strong stability preserving time discretizations ensure the nonlinear non-inner-product strong stability properties of spatial discretizations suited for the stable simulation of hyperbolic PDEs in a wide variety of application areas including fluid dynamics, magnetohydrodynamics, semiconductor devices, electromagnetics, and astrophysics. Over the past decade multiderivative time-stepping have been increasingly used for the time-evolution hyperbolic PDEs, so that the strong stability properties of these methods have become important. In this work we review sufficient conditions for a two-derivative multistage method to preserve the strong stability properties of spatial discretizations in a forward Euler and different conditions on the second derivative. In particular we present the strong stability preserving theory for explicit and implicit two-derivative Runge–Kutta schemes, including a special condition on the second derivative under which these implicit methods may be unconditionally strong stability preserving. This special condition is natural for the stiff component of wide range of plasma physics problems, and can be useful in the context of strong stability preserving implicit-explicit multi-derivative Runge–Kutta schemes, where the time-step restriction is then independent of the stiff term. Lastly, we present the strong stability preserving theory for implicit-explicit multi-derivative general linear methods, and some novel second and third order methods where the time-step restriction is independent of the stiff term.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Performance modeling of MED-MVC systems: Exergy-economic analysis

In this study, exergy analysis of four different feed configurations of a multi-effect desalination with mechanical vapor compressor (MED-MVC) system is initially studied to identify the area of exergy destruction within system components and followed by an exergo-economic study. The feed configurations considered are forward feed (FF), backward feed (BF), parallel feed (PF) and parallel/cross feed (PCF). From the 1st law energy analysis, the PCF and FF configurations require less work to achieve equal distillate production compared to other two configurations. For instance, the specific power consumption (SPC) values are 30.1, 13.7, 23 and 13.9 kWh/m 3 for the BF, FF, PF and PCF configurations, respectively. Changing the feed arrangement from BF to FF and PF to PCF at a constant compression ratio, the total fixed cost for the MED-MVC plant can be reduced by ~30% and 17%, respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

A deep learning-accelerated data assimilation and forecasting workflow for commercial-scale geologic carbon storage

Fast assimilation of monitoring data to update forecasts of pressure buildup and carbon dioxide (CO 2 ) plume migration under geologic uncertainties is a challenging problem in geologic carbon storage. The high computational cost of data assimilation with a high-dimensional parameter space impedes fast decision-making for commercial-scale reservoir management. We propose to leverage physical understandings of porous medium flow behavior with deep learning techniques to develop a fast data assimilation-reservoir response forecasting workflow. Applying an Ensemble Smoother Multiple Data Assimilation (ES-MDA) framework, the workflow updates geologic properties and predicts reservoir performance with quantified uncertainty from pressure history and CO 2 plumes interpreted through seismic inversion. As the most computationally expensive component in such a workflow is reservoir simulation, we developed surrogate models to predict dynamic pressure and CO 2 plume extents under multi-well injection. The surrogate models employ deep convolutional neural networks, specifically, a wide residual network and a residual U-Net. The workflow is validated against a flat threedimensional reservoir model representative of a clastic shelf depositional environment. Intelligent treatments are applied to bridge between quantities in a true-3D reservoir model and those in a single-layer reservoir model. The workflow can complete history matching and reservoir forecasting with uncertainty quantification in less than one hour on a mainstream personal workstation.

25 ENERGY STORAGE↗
DOE OSTI2023

Open Circuit Switch Fault Management Method of a Multi-Phase Synchronous Buck Converter for EV Charging Application

Multi-phase synchronous buck converter (MSBC) is becoming popular for the electric vehicle (EV) charging application because of its higher efficiency, smaller passive component sizes, bidirectional power flow, and output current ripple reduction through interleaving. This converter also provides higher reliability than the traditional single phase converter since its modular structure enables fault tolerant operation. Fault management in the converter requires the detection of switch fault, shut down of the faulty phase, and reconfiguration of the PWM signals for the healthy phases to avoid circulating current and high output current ripple. In addition, it is desirable that the fault management method can be implemented using the micro-controller unit (MCU) or digital signal processor (DSP), which are widely used to control power converters. This paper presents a fault management method for detecting switch faults and reconfiguring healthy phases using a DSP. The method is validated through simulations and experiments using a commercial off-the-shelf power stack.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Data from: Genome-wide association and genomic prediction for biomass yield in Miscanthus sinensis phenotyped in Asia and North America

This dataset contains genotypic and phenotypic data, R scripts, and the results of analysis pertaining to a multi-location field trial of Miscanthus sinensis. Genome-wide association and genomic prediction were performed for biomass yield and 14 yield-component traits across six field trial locations in Asia and North America, using 46,177 single-nucleotide polymorphism (SNP) markers mined from restriction site-associated DNA sequencing (RAD-seq) and 568 M. sinensis accessions. Genomic regions and candidate genes were identified that can be used for breeding improved varieties of M. sinensis, which in turn will be used to generate new M. xgiganteus clones for biomass.

genome-wide association studies (GWAS)↗
DOE OSTI2017

Beyond 100 Gb/s: Capacity, Flexibility, and Network Optimization

Here, we discuss building blocks that enable the exploitation of optical capacities beyond 100 Gb/s. Optical networks will benefit from more flexibility and agility in their network elements, especially from coherent transceivers. To achieve capacities of 400 Gb/s and more, coherent transceivers will operate at higher symbol rates. This will be made possible with higher bandwidth components using new electro-optic technologies implemented with indium phosphide and silicon photonics. Digital signal processing will benefit from new algorithms. Multi-dimensional modulation, of which some formats are already in existence in current flexible coherent transceivers, will provide improved tolerance to noise and fiber nonlinearities. Constellation shaping will further improve these tolerances while allowing a finer granularity in the selection of capacity. Frequency-division multiplexing will also provide improved tolerance to the nonlinear characteristics of fibers. Algorithms with reduced computation complexity will allow the implementation, at speeds, of direct pre-compensation of nonlinear propagation effects. Advancement in forward error correction will shrink the performance gap with Shannon's limit. At the network control and management level, new tools are being developed to achieve a more efficient utilization of networks. This will also allow for network virtualization, orchestration, and management. Lastly, FlexEthernet and FlexOTN will be put in place to allow network operators to optimize capacity in their optical transport networks without manual changes to the client hardware.

47 OTHER INSTRUMENTATION↗

Refine your search to explore more results.