Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOUND VELOCITY - MEASUEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Waveguide-based ultrasonic and far-field electromagnetic sensors for downhole reservoir characterization.

This report summarizes the first year research and development effort leading to development of high-temperature sensors for enhanced geothermal systems. It covers evaluation of ultrasonic and electromagnetic (EM) techniques applied to temperature measurement and flow characterization. On temperature measurement, we have evaluated both microwave radiometry and ultrasonic techniques for temperature gradient and profile measurements. Different antenna designs are evaluated and array loop antenna design is selected for further development. We have also evaluated ultrasonic techniques for total flow characterization, which includes using speed of sound to determine flow temperature, measuring acoustic impedance to estimate fluid density, and using cross-correlation technique to determine the mass flow rate. Method to estimate the flow enthalpy is briefly discussed. At end, the need and proposed techniques to characterize the porosity and permeability of a hot dry rock resource are presented.

15 GEOTHERMAL ENERGY↗

Simulations and observations of heating of auroral ion beams

Two-dimensional three-velocity electrostatic particle simulations were used to determine the nonlinear evolution of the distributions of auroral ion beams and thereby to determine quantitatively signatures in the ion distributions produced by the ion-ion instability for a variety of plasma conditions in the auroral zone. The signatures determined from these simulations were compared with observations from DE 1, making it possible to characterize semiquantitatively the heating of the ionospheric ions, and to investigate the causes of variability seen in the observations of Reiff et al. (1988). A comparison of the simulation with observations showed features consistent with heating via the ion-ion instability including perpendicular heating in the supersonic regime and parallel heating in the subsonic regime, and a change in the heating between these regimes as the ratio of the H(+) beam speed to the local sound speed decreases.

Winglee, R. M.↗

Solar Models in Light of New High Metallicity Measurements from Solar Wind Data

We study the impact of new metallicity measurements, from solar wind data, on the solar model. The “solar modeling problem” refers to the persisting discrepancy between helioseismological observations and predictions of solar models computed implementing state-of-the-art photospheric abundances. We critically reassess the problem, in particular considering the new set of abundances of von Steiger and Zurbuchen, determined through the in situ collection of solar wind samples from polar coronal holes. This new set of abundances indicates a solar metallicity Z{sub ⊙}⩾0.0196±0.0014, significantly higher than the currently established value. The new values hint at an abundance of volatile elements (i.e., C, N, O, Ne) close to previous results of Grevesse and Sauval, whereas the abundance of refractory elements (i.e., Mg, Si, S, Fe) is considerably increased. Using the Linear Solar Model formalism, we determine the variation of helioseismological observables in response to the changes in elemental abundances, in order to explore the consistency of these new measurements with constraints from helioseismology. We find that for observables that are particularly sensitive to the abundance of volatile elements, in particular the radius of the convective zone boundary (CZB) and the sound speed around the radius of CZB, improved agreement over previous models is obtained. Conversely, the high abundance of refractories correlates with a higher core temperature, resulting in an overproduction of neutrinos and a huge increase in the surface helium abundance. We conclude that the “solar modeling problem” remains unsolved.

79 ASTRONOMY AND ASTROPHYSICS↗

Study of a plate-electrode XeCl laser with a pulse repetition rate up to 5 kHz

The results of the study of a repetitively pulsed XeCl laser with a high rate of pulse repetition and the electrode assembly based on a multi-section discharge gap with inductance-capacitance stabilisation of the discharge are presented. The multi-section discharge gap is formed by 25 pairs of anode - cathode plates. The discharge formed in the interelectrode gap had the dimensions 250 Multiplication-Sign 12 Multiplication-Sign 2 mm. The studies were performed using the HCl - Xe - Ne laser mixture at the total pressure up to 3.5 atm. The limit value of the radiation pulse repetition rate was equal to 5 kHz. The meansquare deviation of the pulse energy increased from 0.8 % to 1.6 % in the range of repetition rates from 1 to 4.5 kHz and did not exceed 2.4 % at the frequency 5 kHz. The maximal energy of the laser pulse and the efficiency coefficient were equal to 7.9 mJ and 1.6 %, respectively. The maximal power of laser radiation (31 W) was obtained at the repetition rate 5 kHz. A new technique of measuring the gas flow velocity in the interelectrode gap is proposed. The velocity of gas circulation at the maximal pressure of the mixture did not exceed 18 m s{sup -1}. Optical inhomogeneities were observed, caused by a high concentration of electrons in the discharge plasma, by the acoustic wave, arising in the discharge gap, and by the heating of the gas in the discharge. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helmholtz vibrations in bowed strings

We report for almost 160 years, it has been known that Helmholtz oscillations, unique to vibrating strings in bowed instruments (violin, cello, etc.), have two distinct regimes: “slip” and “stick.” During the slip regime, the force at the bow-string interaction is attributed to friction between the sliding bow hair and the vibrating string, with a friction coefficient that decreases with increasing relative velocity. Yet the hair-string interaction during the stick regime is less understood. We propose that the interaction force during the stick regime is proportional to the product of the longitudinal acoustic impedance of the bow hair to the relative bow-string velocity. We validate this hypothesis by solving the string's differential equation of motion, including an enhanced formulation to avoid parasitic high-frequency oscillations. This physical model enables us to analyze, in real time, the characteristics of the Helmholtz oscillations, including the string shape, excitation of harmonics, Schelleng ripples, and string energy, showing that the bowed string gains energy during the stick regime and loses energy during the slip regime.

36 MATERIALS SCIENCE↗

An Analytic Formula for Entraining CAPE in Midlatitude Storm Environments

Abstract This article introduces an analytic formula for entraining convective available potential energy (ECAPE) with an entrainment rate that is determined directly from an environmental sounding, rather than prescribed by the formula user. Entrainment is connected to the background environment using an eddy diffusivity approximation for lateral mixing, updraft geometry assumptions, and mass continuity. These approximations result in a direct correspondence between the storm-relative flow and the updraft radius and an inverse scaling between the updraft radius squared and entrainment rate. The aforementioned concepts, combined with the assumption of adiabatic conservation of moist static energy, yield an explicit analytic equation for ECAPE that depends entirely on state variables in an atmospheric profile and a few constant parameters with values that are established in past literature. Using a simplified Bernoulli-like equation, the ECAPE formula is modified to account for updraft enhancement via kinetic energy extracted from the cloud’s background environment. CAPE and ECAPE can be viewed as predictors of the maximum vertical velocity w max in an updraft. Hence, these formulas are evaluated using w max from past numerical modeling studies. Both of the new formulas improve predictions of w max substantially over commonly used diagnostic parameters, including undiluted CAPE and ECAPE with a constant prescribed entrainment rate. The formula that incorporates environmental kinetic energy contribution to the updraft correctly predicts instances of exceedance of by w max , and provides a conceptual explanation for why such exceedance is rare among past simulations. These formulas are potentially useful in nowcasting and forecasting thunderstorms and as thunderstorm proxies in climate change studies. Significance Statement Substantial mixing occurs between the upward-moving air currents in thunderstorms (updrafts) and the surrounding comparatively dry environmental air, through a process called entrainment. Entrainment controls thunderstorm intensity via its diluting effect on the buoyancy of air within updrafts. A challenge to representing entrainment in forecasting and predictions of the intensity of updrafts in future climates is to determine how much entrainment will occur in a given thunderstorm environment without a computationally expensive high-resolution simulation. To address this gap, this article derives a new formula that computes entrainment from the properties of a single environmental profile. This formula is shown to predict updraft vertical velocity more accurately than past diagnostics, and can be used in forecasting and climate prediction to improve predictions of thunderstorm behavior and impacts.

54 ENVIRONMENTAL SCIENCES↗

Various Local Heating Events in the Earliest Phase of Flux Emergence

Emerging flux regions (EFRs) are known to exhibit various sporadic local heating events in the lower atmosphere. To investigate the characteristics of these events, especially to link the photospheric magnetic fields and atmospheric dynamics, we analyze Hinode, Interface Region Imaging Spectrograph (IRIS), and Solar Dynamics Observatory data of a new EFR in NOAA AR 12401. Out of 151 bright points (BPs) identified in Hinode/SOT Ca images, 29 are overlapped by an SOT/SP scan. Seven BPs in the EFR center possess mixed-polarity magnetic backgrounds in the photosphere. Their IRIS UV spectra (e.g., Si iv 1402.8 Å) are strongly enhanced and red- or blueshifted, with tails reaching ±150 km s{sup −1}, which is highly suggestive of bi-directional jets; each brightening lasts for 10–15 minutes, leaving flare-like light curves. Most of this group show bald patches, the U-shaped photospheric magnetic loops. Another 10 BPs are found in unipolar regions at the EFR edges. They are generally weaker in UV intensities and exhibit systematic redshifts with Doppler speeds up to 40 km s{sup −1}, which could exceed the local sound speed in the transition region. Both types of BPs show signs of strong temperature increase in the low chromosphere. These observational results support the physical picture that heating events in the EFR center are due to magnetic reconnection within cancelling undular fields like Ellerman bombs, while the peripheral heating events are due to shocks or strong compressions caused by fast downflows along the overlying arch filament system.

79 ASTRONOMY AND ASTROPHYSICS↗

The ultraviolet flux distribution of Alpha-2 Canum Venaticorum

Intermediate- and narrow-band UV spectrophotometry from Copernicus, OAO 2, the S2-68 experiment on TD 1, and a sounding-rocket experiment are combined with ground-based observations to define the absolute flux distribution of the bright magnetic Ap star Alpha-2 CVn over the wavelength range from 1030 to 7580 A. Two flux distributions are presented which coincide more or less with the rare-earth maximum and minimum in the star's cycle. The results are compared with those for two normal stars, the UV variability of Alpha-2 CVn is characterized as a function of wavelength, and non-LTE effects on the UV continua of C I and Si I are analyzed. Some physical properties of Alpha-2 CVn are estimated, and the evolutionary age of the star is estimated to be between 220 million and 300 million years. It is concluded that Alpha-2 CVn is old enough to have been magnetically braked to its current rotational velocity by either the centrifugal-wind or the accretion mechanism and to have developed its chemical peculiarities by either mechanism.

Leckrone, D. S.↗

Diagnosing Noise Features Of Internally Mixed, External Plug Exhaust Systems

In internally mixed exhaust systems, a lobed or forced mixer is employed to mix the core and bypass streams before they exit the common nozzle. For moderate bypass-ratio engines this marginally improves thrust, and provides a significant acoustic benefit. Indeed, it has been thought that a fully mixed jet creates the lowest noise you can get from a two-stream engine. Typically, the forced mixer system produces a bit more noise than a fully mixed equivalent jet, noise that has been called “excess noise”. In recent testing, this excess noise seemed to be amplified when an external plug was employed in the exhaust system to reduce boattail drag. Identifying the mechanism of this excess noise and mitigating it is key to creating commercial supersonic vehicles that are acoustically acceptable around airports. This paper adds to that investigation, analyzing results from recent tests where far-field acoustic data were acquired on two sets of flows with matched fully mixed flow conditions. One set of flows had a heated core stream, making it a dual-stream jet. The other set had both streams heated to the same temperature, making a single-stream jet that matched the fully mixed temperature and velocity of the dual-stream jet. These flows were tested in two lobed-mixer exhaust systems with internal and external plugs. Analysis of flow and noise data from the nozzles with combinations of single- and dual-stream flows, and with and without flight streams, gives insight into how and why the noise of the dual-stream and single-stream jet differ. One additive source, present in nozzles both with and without external plugs, comes from inside the nozzle, likely the internal shear layer coming off the lobed mixer. This noise source is not impacted by a change in flight stream and has a distinctive spectral directivity that is amplified by the presence of the external plug. Finding the exact source mechanism of this new source will be key to making the internally mixed exhaust systems reach their lowest possible sound level.

Noise prediction, supersonic, jet noise↗

Diagnosing Noise Features Of Internally Mixed, External Plug Exhaust Systems

In internally mixed exhaust systems, a lobed or forced mixer is employed to mix the core and bypass streams before they exit the common nozzle. For moderate bypass-ratio engines this marginally improves thrust, and provides a significant acoustic benefit. Indeed, it has been thought that a fully mixed jet creates the lowest noise you can get from a two-stream engine. Typically, the forced mixer system produces a bit more noise than a fully mixed equivalent jet, noise that has been called “excess noise”. In recent testing, this excess noise seemed to be amplified when an external plug was employed in the exhaust system to reduce boattail drag. Identifying the mechanism of this excess noise and mitigating it is key to creating commercial supersonic vehicles that are acoustically acceptable around airports. This paper adds to that investigation, analyzing results from recent tests where far-field acoustic data were acquired on two sets of flows with matched fully mixed flow conditions. One set of flows had a heated core stream, making it a dual-stream jet. The other set had both streams heated to the same temperature, making a single-stream jet that matched the fully mixed temperature and velocity of the dual-stream jet. These flows were tested in two lobed-mixer exhaust systems with internal and external plugs. Analysis of flow and noise data from the nozzles with combinations of single- and dual-stream flows, and with and without flight streams, gives insight into how and why the noise of the dual-stream and single-stream jet differ. One additive source, present in nozzles both with and without external plugs, comes from inside the nozzle, likely the internal shear layer coming off the lobed mixer. This noise source is not impacted by a change in flight stream and has a distinctive spectral directivity that is amplified by the presence of the external plug. Finding the exact source mechanism of this new source will be key to making the internally mixed exhaust systems reach their lowest possible sound level.

Noise prediction↗

Unified dark energy and dark matter from a scalar field different from quintessence

We explore unification of dark matter and dark energy in a theory containing a scalar field of non-Lagrangian type, obtained by direct insertion of a kinetic term into the energy-momentum tensor. This scalar is different from quintessence, having an equation of state between -1 and 0 and a zero sound speed in its rest frame. We solve the equations of motion for an exponential potential via a rewriting as an autonomous system, and demonstrate the observational viability of the scenario, for sufficiently small exponential potential parameter {lambda}, by comparison to a compilation of kinematical cosmological data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Alternative for Emergency Preemption of Traffic Lights

An electronic communication-and-control system has been developed as a prototype of advanced means of automatically modifying the switching of traffic lights to give priority to emergency vehicles. This system could be used alternatively or in addition to other emergency traffic-light-preemption systems, including a variety of systems now in use as well as two proposed systems described in "Systems Would Preempt Traffic Lights for Emergency Vehicles" (NPO-30573), NASA Tech Briefs, Vol. 28, No. 10 (October 2004), page 36. Unlike those prior systems that depend on detection of sounds and/or lights emitted by emergency vehicles, this system is not subject to severe range limitations. This system can be retrofitted into any pre-existing traffic-light-control system, without need to modify that system other than to make a minimal number of wire connections between the two systems. This system comprises several subsystems, including a transponder and interface circuitry on each emergency vehicle, a monitoring and control unit at each intersection equipped with traffic lights, and a wide-area two-way radio communication network that connects the emergency vehicles and intersection units. Computers in the various intersections and vehicle units run special-purpose software that implements the traffic- light-preemption scheme. The operations of the intersection and vehicle units are synchronized by use of Global Positioning System (GPS) timing signals. The transponder in each vehicle estimates its own position and velocity by use of GPS signals, deductive ("dead") reckoning, data from the onboard diagnostic (OBD) computer of the vehicle, and/or triangulation of beacon signals. When the operator of an emergency vehicle turns on its flashing lights and sirens in response to a request for an emergency response, the transponder unit goes into action, reading the OBD data to determine speed and acceleration, and reading and gathering further navigational data as described above. The position, velocity, and acceleration data are combined with vehicle-identification data in a prescribed format, and the resulting set of data is transmitted to the intersections within communication range of the transponder.

Foster, Conrad↗

The effects of scattering on solar oscillations

Acoustic modes are scattered by turbulent velocity fluctuations in the solar convection zone. The strongest scattering occurs near the top of the acoustic cavity where the mode changes character from propagating to evanescent. This layer is located at depth z(sub 1) approximately g/omega(exp 2) below the photosphere. The scattering optical depth tau(sub s) is of order M(sub 1)(exp 2), where M(sub 1) is the Mach number of the energy-bearing eddies at z(sub 1). The corresponding contribution to the line width is gamma(exp s) is approximately (omega) M(sub 1)(exp 2)/(pi)(n+1), where n is the mode's radial order. At the top of the acoustic cavity the correlation time of energy-bearing eddies is much longer than omega(exp -1). Also, the pressure scale height H and the eddy correlation length Lambda are comparable to omega/c, where c is the sound speed. Thus scattering couples modes of similar omega and all l and has little effect on the sum of their energies. Observations show that mode energies decline with decreasing n (increasing l) at fixed omega. Consequently, scattering damps p-modes and excites f-modes.

Goldreich, Peter↗

EXCITATION OF ACOUSTIC WAVES BY VORTICES IN THE QUIET SUN

The five-minute oscillations are one of the basic properties of solar convection. Observations show a mixture of a large number of acoustic wave fronts propagating from their sources. We investigate the process of acoustic waves excitation from the point of view of individual events, by using a realistic three-dimensional radiative hydrodynamic simulation of the quiet Sun. The results show that the excitation events are related to the dynamics of vortex tubes (or swirls) in intergranular lanes of solar convection. These whirlpool-like flows are characterized by very strong horizontal velocities (7-11 km s{sup -1}) and downflows ({approx}7 km s{sup -1}), and are accompanied by strong decreases of temperature, density, and pressure at the surface and 0.5-1 Mm below the surface. High-speed whirlpool flows can attract and capture other vortices. According to our simulation results the processes of vortex interaction, such as vortex annihilation, can cause excitation of acoustic waves on the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗

Charge Generation and Propagation in Igneous Rocks

Resistivity changes, ground potentials, electromagnetic (EM) and luminous signals prior to or during earthquakes have been reported, in addition to ground uplift and tilt, and to changes in the seismic wave propagation parameters. However, no physical model exists that ties these diverse phenomena together. Through time-resolved impacts experiments it has been observed that, when igneous rocks (gabbro, diorite, granite) are impacted at low velocities (approx. 100 m/sec), highly mobile electronic charge carriers are generated, spreading from a small volume near the impact point, causing electric potentials, EM and light emission. The rock becomes momentarily conductive. When impacted at higher velocities (approx. 1.5 km/sec), the propagation of the P and S waves is registered through the transient piezoelectric response of quartz. At the same time, the rock volume is filled with mobile charge carriers, and a positive surface potential is registered. During the next 1-2 msec the surface potential oscillates, due to electron injection from ground. These observations are consistent with positive holes, e.g. defect electrons in the O(2-) sublattice, that can travel via the O 2p-dominated valence band of the silicate minerals at the speed of a phonon-mediated charge transfer. Before activation, the positive hole charge carriers lay dormant in form of positive hole pairs, PHP, electrically inactive, chemically equivalent to peroxy links in the structures of constituent minerals. PHPs are introduced by way of hydroxyl (O3Si-OH) incorporated into nominally anhydrous minerals when they crystallize in water-laden environments. Given that sound waves of even relatively low intensity appear to cause PHPs dissociation, thus generating mobile positive holes, it is proposed that microfracturing during rock deformation cause PHP dissociation. Depending on where and how much the rock volume is stressed, the positive holes are expected to form fluctuating charge clouds in the earthquake source region that may account for earthquake-related electrical phenomena and the reported low frequency EM signals.

Freund, Friedemann↗

Planetary Boundary-Layer Height (PBLHT) Value-Added Product: Remote-Sensing Retrievals

The planetary boundary layer (PBL) is fundamental to numerous atmospheric processes, including aerosol mixing and transport, cloud evolution, and precipitation formation. A critical parameter in these studies is the PBL height (PBLHT). This vertical depth is essential for characterizing PBL structures in numerical simulations and serves as a primary metric for estimating flux exchanges between the Earth’s surface and the atmosphere. Radiosonde (SONDE) observations provide high-vertical-resolution measurements of temperature and moisture profiles and are widely used to estimate PBLHT (Liu and Liang 2010, Seidel et al. 2010). The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s PBLHT value-added product (VAP) for radiosonde measurements, known as PBLHTSONDE, applies three commonly used methods—the Heffter (1980) method, the Liu and Liang (2010) method, and the bulk Richardson number approach (Seibert et al. 2000)—to derive PBLHT. The PBLHTSONDE VAP operates routinely at ARM observatories and mobile facilities, with data available from the ARM Data Center shortly after sounding observations are collected (Sivaraman et al. 2013). However, radiosonde observations are limited by their low temporal resolution. Most stations launch soundings only twice daily, which constrains the ability to investigate and characterize the temporal evolution of the PBL using radiosonde data alone. The use of continuous remote-sensing observations provides high temporal resolution of PBLHT estimates. These observations include aerosol lidars (Dang et al. 2019, Su et al. 2020), Doppler lidar (DL; Tucker et al. 2009, Krishnamurthy et al. 2021), and water vapor and/or temperature lidars and radiometers (Turner et al. 2014). These observations provide valuable data on the PBL’s thermodynamic properties (e.g., water vapor and/or temperature lidars and radiometers), dynamic properties (e.g., DL), and distribution of tracer substances (e.g., aerosol lidars), all of which can be used to estimate PBLHT. ARM developed PBLHT estimates from the micropulse lidar (MPL; PBLHTMPL), Doppler lidar (PBLHTDL), and combined Raman lidar (RL)/atmospheric emitted radiance interferometer (AERI) thermodynamic profiles (PBLHTTHERMO). Each estimate captures different physical characteristics of the boundary layer—aerosol tracers, vertical velocity turbulence, and thermodynamic structure—and exhibits distinct strengths and limitations depending on the PBL regime and time of day. In addition, the ARM ceilometer (CEIL) provides three potential PBLHT candidates derived from the vendor's built-in algorithm. Building on these individual retrievals, ARM developed the PBLHTBEML VAP, which combines the four remote-sensing-based estimates with ancillary meteorological variables using the machine learning approach of Zhang et al. (2025) to produce a best-estimate PBLHT at 10-minute resolution.

54 ENVIRONMENTAL SCIENCES↗

Refinement and application of acoustic impulse technique to study nozzle transmission characteristics

An improved acoustic impulse technique was developed and was used to study the transmission characteristics of duct/nozzle systems. To accomplish the above objective, various problems associated with the existing spark-discharge impulse technique were first studied. These included (1) the nonlinear behavior of high intensity pulses, (2) the contamination of the signal with flow noise, (3) low signal-to-noise ratio at high exhaust velocities, and (4) the inability to control or shape the signal generated by the source, specially when multiple spark points were used as the source. The first step to resolve these problems was the replacement of the spark-discharge source with electroacoustic driver(s). These included (1) synthesizing on acoustic impulse with acoustic driver(s) to control and shape the output signal, (2) time domain signal averaging to remove flow noise from the contaminated signal, (3) signal editing to remove unwanted portions of the time history, (4) spectral averaging, and (5) numerical smoothing. The acoustic power measurement technique was improved by taking multiple induct measurements and by a modal decomposition process to account for the contribution of higher order modes in the power computation. The improved acoustic impulse technique was then validated by comparing the results derived by an impedance tube method. The mechanism of acoustic power loss, that occurs when sound is transmitted through nozzle terminations, was investigated. Finally, the refined impulse technique was applied to obtain more accurate results for the acoustic transmission characteristics of a conical nozzle and a multi-lobe multi-tube supressor nozzle.

Salikuddin, M.↗

An experimental investigation of wing tip turbulence with applications to aerosound

Wind tunnel tests were performed to measure the turbulence characteristics of flow in the wing tip region of a blunt tipped NACA 0012 airfoil at angles of attack of 16, 12 and 6 deg and flow speeds of 75, 55, and 35 m/s. Reynolds numbers based on the chord length ranged from 1.8 x 10(exp6) to 3.8 x 10(exp 6). Hot wire measurements were made at an angle of attack of 12 deg and U(infinity) = 55 ms. These indicate fluctuation velocities on the order of 0.13 U(infinity) in the tip region. Surface pressure spectra are presented for alpha = 12 deg and 16 deg; surface-pressure cross-correlations are presented for alpha = 16 deg. These suggest the presence of a well organized turbulence structure with a peak Strouhal number 0.8 to 1.1 based on the wing thickness. High frequency turbulence of lesser intensity was measured at positions near the primary tip vortex on the upper wing surface. A separation region with a spectral peak of St approximately equal to 0.4 was recorded at alpha = 16 deg for the transducer located on the low pressure side of the wing nearest the trailing edge. Surface-surface cross correlations display a double, echo like structure. Near-far field correlations indicate that the well ordered tip turbulence and the separation region on the upper surface both radiate significant levels of far field sound. The use of cross correlation techniques in the wind tunnel has permitted treatment of radiated sound levels which are 25 and more dB below tunnel background levels.

Mcinerny, S. A.↗

Refine your search to explore more results.