Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Temperature dependence of gas sensing behaviour of TiO{sub 2} doped PANI composite thin films

In the present work we have reported the effect of temperature on the gas sensing properties of TiO{sub 2} doped PANI composite thin film based chemiresistor type gas sensors for hydrogen gas sensing application. PANI and TiO{sub 2} doped PANI composite were synthesized by in situ chemical oxidative polymerization of aniline at low temperature. The electrical properties of these composite thin films were characterized by I-V measurements as function of temperature. The I-V measurement revealed that conductivity of composite thin films increased as the temperature increased. The changes in resistance of the composite thin film sensor were utilized for detection of hydrogen gas. It was observed that at room temperature TiO{sub 2} doped PANI composite sensor shows higher response value and showed unstable behavior as the temperature increased. The surface morphology of these composite thin films has also been characterized by scanning electron microscopy (SEM) measurement.

36 MATERIALS SCIENCE↗

Growth and characterization of new organic nonlinear optical crystal (R)-2-cyano-N-(1-phenylethyl) acetamide

(R)-2-Cyano-N-(1-phenylethyl) acetamide (RCNPA) single crystals were grown by slow evaporation of the aqueous solution at room temperature (300K) using ethanol. The grown crystals were characterized by single crystal X-ray diffraction, powder X-ray diffraction, FTIR, UV-Vis-NIR transmittance, scanning electron microscopy (SEM) and powder second harmonic generation (SHG)

36 MATERIALS SCIENCE↗

A simple route to the synthesis of BaCrO{sub 4} microstructures at room temperature

BaCrO{sub 4} with various morphologies such as X-shaped, shuttle, rhombus was produced by using poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (P123) as a structure-directing agent at room temperature. The effects of experimental parameters on the morphology of BaCrO{sub 4} were investigated. This synthetic route was also extended to the synthesis of BaWO{sub 4} and Pb{sub 2}CrO{sub 5}. The samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform-infrared spectroscopy (FT-IR). The photoluminescence (PL) of the sample was investigated.

36 MATERIALS SCIENCE↗

Temperature-dependent H{sub 2} gas-sensing properties of fabricated Pd nanowires using highly oriented pyrolytic graphite

Horizontal palladium (Pd) nanowires and Pd nanoparticles were successfully fabricated directly on highly oriented pyrolytic graphite depending on the electrodeposition time using palladium nitrate [Pd(NO{sub 2}){sub 3}] solution at room temperature, and the temperature-dependent hydrogen (H{sub 2}) sensing properties of these structures were investigated in the concentration range of 50-5000 ppm. Pd nanowires and Pd nanoparticles were fabricated on a graphite surface by applying triple-pulsed potential with varying the electrodeposition time from 400 to 600 s. The fabricated Pd nanowires were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy. It was found that the nanowire arrays were continuous, parallel to each other and ordered after an electrodeposition time of 600 s. The diameters of the Pd nanowires and Pd nanoparticles are observed in the range of 70-180 nm. The H{sub 2} sensing properties of these structures were determined with variation in resistance measurements. It was observed that the limit of detection is lower than 50 ppm H{sub 2}, the sensor response was approximately 2% for 1000 ppm H{sub 2} at room temperature, and the sensor response was decreased with increasing temperature.

36 MATERIALS SCIENCE↗

Effects of Co contents on the microstructures and properties of the electrodeposited NiCo–Zr composite coatings

Highlights: • The novel NiCo–Zr coatings were prepared by electro-deposition. • Surface morphology, crystal structure, grain size and microstrain were examined. • Texture, residual stress and corrosion resistance were investigated. • Addition of Co increased the hardness and corrosion resistance of the coatings. - Abstract: In this study, the NiCo–Zr composite coatings were prepared from the electrolytes with different Co{sup 2+} concentrations by electrodeposition method. The effects of Co contents on the crystal structure, surface morphology, grain size, microstrain and residual stress were examined by X-ray diffractometer (XRD), field emission scanning electron microscopy (FESEM), Energy dispersive X-ray spectroscopy (EDX) and atomic force microscope (AFM). The corrosion resistance of the composite coatings was also examined by the potentiodynamic polarization and electrochemical impedance (EIS) measurements. The results revealed that the crystal structures of the coatings were dependent on the Co contents and addition of Co content of 58 wt% resulted in the formation of hexagonal (hcp) Co. The increasing Co contents in the NiCo–Zr composite coatings resulted in the smoother and more compact surface, decreased the grain size and increased the microstrain. The micro-hardness and residual stress also increased with increasing Co contents. The addition of Co increased the corrosion resistance of the NiCo–Zr composite coatings compared with the Ni–Zr coating while the corrosion resistance of the NiCo–Zr composite coatings decreased as the Co contents increased.

36 MATERIALS SCIENCE↗

High temperature electrical properties study of Sr{sub 2}(Fe,Ti)O{sub 6} double perovskite materials using impedance spectroscopy method

The structure, thermal, and electrical properties of double perovskite material Sr{sub 2}(Fe,Ti)O{sub 6} at high temperature have been studied. This material was synthesized by a solid state reaction method. X-ray diffraction characterization at room temperature for all samples shows a single phase and having a structure of cubic double perovskite with Pm3m space group. The variation of Fe and Ti atoms are seen in an increasing of lattice parameter and grain size which is found between 30 nm and 80 nm. The electrical properties as a function of temperature and frequency are characterized by using RLC-meter with impedance spectroscopy method. The impedance data are presented in Nyquist and Bode plot resulting in the equivalent circuit and its parameters. The equivalent circuit shows the effect of grain and grain boundary in the electrical properties of materials. DC conductivity of Sr{sub 2}(Fe,Ti)O{sub 6} as a function of temperature was explained by using Arrhenius equation. The value of the activation energy which is evaluated from dc conductivity as a function of temperature shows the effect of grain and grain boundary. The activation energy exhibits of oxygen vacancy in Sr{sub 2}(Fe,Ti)O{sub 6} which is also supported by morphology of Sr{sub 2}(Fe,Ti)O{sub 6} is characterized by field emission scanning electron microscopy (FESEM).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compliant alkali silicate sealing glass for solid oxide fuel cell applications: Combined stability in isothermal ageing and thermal cycling with YSZ coated ferritic stainless steels

An alkali-containing silicate glass (SCN-1) is currently being evaluated as a candidate sealing glass for solid oxide fuel cell (SOFC) applications. The glass contains about 17 mole% alkalis (K+Na) and has low glass transition and softening temperatures. It remains vitreous and compliant around 750-800oC after sealing without substantial crystallization, as contrary to conventional glass-ceramic sealants, which experience rapid crystallization after the sealing process. The glassy nature and low characteristic temperatures can reduce residual stresses and result in the potential for crack healing. In a previous study, the glass was found to have good thermal cycle stability and was chemically compatible with YSZ coating during short term testing. In the current study, the compliant glass was further evaluated in a more realistic way in that the sealed glass couples were first isothermally aged for 1000h followed by thermal cycling. High temperature leakage was measured. The chemical compatibility was also investigated with powder mixtures at 700 and 800oC to enhance potential interfacial reaction. In addition, interfacial microstructure was examined with scanning electron microscopy and evaluated with regard to the leakage and chemical compatibility results.

30 DIRECT ENERGY CONVERSION↗

Microwave-assisted hydrothermal synthesis of coralloid nanostructured nickel hydroxide hydrate and thermal conversion to nickel oxide

Coralloid nanostructured nickel hydroxide hydrate has been successfully synthesized by a simple microwave-assisted hydrothermal process using nickel sulfate hexahydrate as precursor and urea as hydrolysis-controlling agent. A pure coralloid nanostructured nickel oxide can be obtained from the nickel hydroxide hydrate after calcination at 400 deg. C. The thermal property, structure and morphology of samples were characterized by thermogravimetry (TG), temperature-programmed reduction (TPR), X-ray (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

36 MATERIALS SCIENCE↗

Characterization of the properties of thermoplastic elastomers containing waste rubber tire powder

The aim of this research was to recycle waste rubber tires by using powdering technology and treating the waste rubber tire powder with bitumen. It has been proven that the elongation at break, thermal stability and processing flowability of composites of polypropylene (PP), waste rubber tire powder (WRT) and bitumen composites are better than those of PP/WRT composite. A comparative study has been made to evaluate the influence of bitumen content and different compatibilizers on the properties of PP/WRT/bitumen composites, using a universal testing machine (UTM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and a capillary rheometer. The results suggested that the properties of PP/WRT/bitumen composites were dependent on the bitumen content and the kind of compatibilizer used.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Tb{sup 3+} doped MgSrAl{sub 10}O{sub 17} green emitting phosphor

There is a growing demand for economically viable phosphors for newly emerging display devices with on-going technological advancements. Various aluminates are used as hosts for doping rare earth ions in luminescent applications. Green emitting terbium-ion-doped MgSrAl{sub 10}O{sub 17} phosphor prepared using the combustion method. An efficient phosphor can be prepared by this method at around 550°C in a very short time of few minutes. Further phosphor was analyzed by XRD for the confirmation of desired phase and purity. The morphology and structure of the phosphor were characterized by Scanning electron microscopy. The vibrational properties of MgSrAl{sub 10}O{sub 17} phosphor was studied by FTIR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SnTe microcrystals: Surface cleaning of a topological crystalline insulator

Investigating nanometer and micron sized materials thought to exhibit topological surface properties that can present a challenge, as clean surfaces are a pre-requisite for band structure measurements when using nano-ARPES or laser-ARPES in ultra-high vacuum. This issue is exacerbated when dealing with nanometer or micron sized materials, which have been prepared ex-situ and so have been exposed to atmosphere. We present the findings of an XPS study where various cleaning methods have been employed to reduce the surface contamination and preserve the surface quality for surface sensitive measurements. Microcrystals of the topological crystalline insulator SnTe were grown ex-situ and transferred into ultra high vacuum (UHV) before being treated with either atomic hydrogen, argon sputtering, annealing, or a combination of treatments. The samples were also characterised using the scanning electron microscopy, both before and after treatment. It was found that atomic hydrogen cleaning with an anneal cycle (200 °C) gave the best clean surface results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the Interaction of Plasma with Beryllium That Is a Candidate Material for the First Wall of a Fusion Reactor

The experimental conditions for treatment of a candidate material of the first wall, beryllium, by the plasma have been determined. The plasma parameters obtained using the simulator with a plasma-beam setup during the irradiation of samples as well as the results of material studies obtained by scanning electron microscopy and energy-dispersion analysis of the beryllium surface layer have been considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced electron field emission from plasma-nitrogenated carbon nanotips

Nitrogenated carbon nanotips (NCNTPs) are synthesized by plasma-enhanced hot filament chemical vapor deposition from the hydrogen, methane, and nitrogen gas mixtures with different flow rate ratios of hydrogen to nitrogen. The morphological, structural, compositional, and electron field emission (EFE) properties of the NCNTPs were investigated by field emission scanning electron microscopy, Raman spectroscopy, x ray photoelectron spectroscopy, and EFE high-vacuum system. It is shown that the NCNTPs deposited at an intermediate flow rate ratio of hydrogen to nitrogen feature the best size/shape and pattern uniformity, the highest nanotip density, the highest nitrogen concentration, as well as the best electron field emission performance. Several factors that come into play along with the nitrogen incorporation, such as the combined effect of the plasma sputtering and etching, the transition of sp{sup 3} carbon clusters to sp{sup 2} carbon clusters, the increase of the size of the sp{sup 2} clusters, as well as the reduction of the work function, have been examined to interpret these experimental findings. Our results are highly relevant to the development of the next generation electron field emitters, flat panel displays, atomic force microscope probes, and several other advanced applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of anti-adhesion surfaces on aluminium substrates of rubber plastic moulds using electrolysis plasma treatment

An anti-adhesion surface with a water contact angle of 167° was fabricated on aluminium samples of rubber plastic moulds by electrolysis plasma treatment using mixed electrolytes of C{sub 6}H{sub 5}O{sub 7}(NH{sub 4}){sub 3} and Na{sub 2}SO{sub 4}, followed by fluorination. To optimise the fabrication conditions, several important processing parameters such as the discharge voltage, discharge time, concentrations of supporting electrolyte and stearic acid ethanol solution were examined systematically. Using scanning electron microscopy (SEM) to analyse surfaces morphology, micrometer scale pits, and protrusions were found on the surface, with numerous nanometer mastoids contained in the protrusions. These binary micro/nano-scale structures, which are similar to the micro-structures of soil-burrowing animals, play a critical role in achieving low adhesion properties. Otherwise, the anti-adhesion behaviours of the resulting samples were analysed by the atomic force microscope (AFM), Fourier-transform infrared spectrophotometer (FTIR), electrons probe micro-analyzer (EPMA), optical contact angle meter, digital Vickers microhardness (Hv) tester, and electronic universal testing. The results show that the electrolysis plasma treatment does not require complex processing parameters, using a simple device, and is an environment-friendly and effective method. Under the optimised conditions, the contact angle (CA) for the modified anti-adhesion surface is up to 167°, the sliding angle (SA) is less than 2°, roughness of the sample surface is only 0.409μm. Moreover, the adhesion force and H{sub v} are 0. 9KN and 385, respectively.

36 MATERIALS SCIENCE↗

Mechanosynthesis, deposition and characterization of CZTS and CZTSe materials for solar cell applications

Mechanosynthesis of nanocrystalline powders of CZTS and CZTSe by ball milling technique and the physical properties of thermally evaporated CZTS and CZTSe thin films as a function of substrate temperature are investigated. Nanocrystalline Cu–Zn–Tin–Sulphide (CZTS) and Cu–Zn–Tin–Selenide (CZTSe) powders synthesized by ball milling at different milling time using the source materials of Cu, Zn, Sn, S (or) Se in the ratio 2:1:1:4 are investigated. The above synthesized powder was thermally evaporated on glass substrate kept at room temperature and 673 K under a vacuum of 10{sup −6} mbar to prepare quaternary compound semiconducting thin films in a single step process. The synthesized powder and deposited CZTS and CZTSe thin films belong to tetragonal crystal system. Raman spectra reveal that the synthesized nanocrystals are pure without any secondary phases. A gradual reduction in optical bandgap of films was observed with increasing substrate temperature due to increased crystallinity of the films. The changes in surface morphology of the films with respect to substrate temperature were studied by scanning electron microscopy and atomic force microscopy. Electrical studies indicate that the deposited films have p-type conductivity. - Highlights: • Nanocrystalline powders of CZTS and CZTSe are synthesized by ball milling technique. • The ball milled powder was thermally evaporated on glass at room temperature and 673 K. • Raman spectroscopy reveals that the synthesized nanocrystals are pure without any secondary phases. • SEM and AFM micrographs illustrate the granular type of growth and the roughness and particle sizes obtained at the substrate temperature of 673 K are higher than those obtained in the room temperature. • Hall coefficient obtained for the film confirms the p-type conductivity. • A gradual reduction in optical bandgap was observed with increasing substrate temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superhard behaviour, low residual stress, and unique structure in diamond-like carbon films by simple bilayer approach

Simple bilayer approach is proposed for synthesizing hard and superhard diamond-like carbon (DLC) coatings with reduced residual stress. For this, M/DLC bilayer (M = Ti and Cu) structures are grown using hybrid system involving radio frequency (RF)-sputtering and RF-plasma enhanced chemical vapor deposition techniques. Ti/DLC bilayer deposited at negative self bias of 100 V shows superhard behaviour with hardness (H) as 49 GPa. Cu/DLC bilayer grown at self bias of 100 V exhibits hard behaviour with H as 22.8 GPa. The hardness of Ti/DLC (Cu/DLC) bilayer gets changed from superhard (hard) to hard (moderate hard) regime, when the self bias is raised to 300 V. Residual stress in Ti/DLC (Cu/DLC) bilayer is found to be significantly low that varies in the range of 1 GPa-1.65 GPa (0.8 GPa-1.6 GPa). The microstructure and morphology are studied by Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM). SEM and AFM pictures reveal the creation of nanostructured features in the deposited bilayers. Raman, SEM, and AFM analyses are correlated with the nano-mechanical properties. Owing to excellent nano-mechanical properties, these bilayers can find their direct industrial applications as hard and protective coatings.

36 MATERIALS SCIENCE↗

Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO{sub 2}

B,N-TiO{sub 2} photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH{sub 3} at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO{sub 2} were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO{sub 2} lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 {sup o}C. Higher temperature may form many oxygen vacancies and Ti{sup 3+} species, resulting in the decrease of photocatalytic activity in visible light. -- Graphical abstract: The changes of photocatalytic activity of B,N-TiO{sub 2} with variable nitrogen doping temperatures are attributed to the transformation of surface structure and oxygen vacancies, and the Ti-O-B-N structure plays a vital role in photocatalytic activity under visible light irradiation. Display Omitted Research highlights: > B,N-TiO{sub 2} photocatalysts are synthesized by boron doping firstly and subsequently nitrogen doping in NH{sub 3} at variable temperatures. > The boron and nitrogen can be incorporated into the TiO{sub 2} lattice either interstitially or substitutionally or both. > The temperature of nitrogen doping affects the transformation of surface structure and oxygen vacancies. > The Ti-O-B-N structure plays an important role in photocatalytic activity under visible light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of O{sub 2}{sup +}, H{sub 2}{sup +}+ O{sub 2}{sup +}, and N{sub 2}{sup +}+ O{sub 2}{sup +} ion-beam irradiation on the field emission properties of carbon nanotubes

The effect of O{sub 2}{sup +}, H{sub 2}{sup +}+ O{sub 2}{sup +}, and N{sub 2}{sup +}+ O{sub 2}{sup +} ion-beam irradiation of carbon nanotubes (CNTs) films on the chemical and electronic properties of the material is reported. The CNTs were grown by the chemical vapor deposition technique (CVD) on silicon TiN coated substrates previously decorated with Ni particles. The Ni decoration and TiN coating were successively deposited by ion-beam assisted deposition (IBAD) and afterwards the nanotubes were grown. The whole deposition procedure was performed in situ as well as the study of the effect of ion-beam irradiation on the CNTs by x-ray photoelectron spectroscopy (XPS). Raman scattering, field-effect emission gun scanning electron microscopy (FEG-SEM), and field emission (FE) measurements were performed ex situ. The experimental data show that: (a) the presence of either H{sub 2}{sup +} or N{sub 2}{sup +} ions in the irradiation beam determines the oxygen concentration remaining in the samples as well as the studied structural characteristics; (b) due to the experimental conditions used in the study, no morphological changes have been observed after irradiation of the CNTs; (c) the FE experiments indicate that the electron emission from the CNTs follows the Fowler-Nordheim model, and it is dependent on the oxygen concentration remaining in the samples; and (d) in association with FE results, the XPS data suggest that the formation of terminal quinone groups decreases the CNTs work function of the material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Refine your search to explore more results.