Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Pulsed RF schemes for tearing mode stabilization

The RF stabilization of tearing modes with current condensation has the potential to increase stabilization efficiency and loosen power localization requirements. Such benefits stem from the cooperative feedback between the RF deposition and resulting island temperature perturbation governed by diffusion. A self consistent treatment of the damping of an rf ray as it traverses the island shows that low damping scenarios can require unfavorably high powers to overcome initial power leakage and effectively capitalize on the nonlinear effect. In this work it is demonstrated that for such regimes,modulated stabilization schemes can achieve significant improvements in heating and current drive contributions to stabilization for the same average power as a continuous wave scheme. The impact of modulation frequency and duty cycle on the performance is explored, the results of which suggest modulation strategies in which the pulsing periods are kept on the order of a diffusive time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytic investigation of combined effects of anisotropic thermal transport and energetic particles on stability of resistive plasma resistive wall mode

The combined effects of anisotropic thermal transport and trapped energetic particles (EPs) on the stability of the resistive plasma resistive wall mode (RPRWM) are investigated by an energy-principle based analytical model. The results qualitatively confirm that of a recent toroidal modeling study [Bai et al., Phys. Plasmas 27, 072502 (2020)], in which the thermal transport can stabilize the RPPWM depending on the parameters of both the plasma equilibrium and energetic particles. The analytical model predicts a complete stabilization of the RPRWM in highly resistive plasmas, at sufficiently high EPs’ pressure, and finite plasma flow. The stabilizing effect of thermal transport originates from its enhancement of energy dissipations associated with both the resistive layer and the trapped energetic particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Perspective on ferroelectricity in hafnium oxide: Mechanisms and considerations regarding its stability and performance

Ferroelectric hafnium oxides are poised to impact a wide range of microelectronic applications owing to their superior thickness scaling of ferroelectric stability and compatibility with mainstream semiconductors and fabrication processes. For broad-scale impact, long-term performance and reliability of devices using hafnia will require knowledge of the phases present and how they vary with time and use. In this Perspective article, the importance of phases present on device performance is discussed, including the extent to which specific classes of devices can tolerate phase impurities. Following, the factors and mechanisms that are known to influence phase stability, including substituents, crystallite size, oxygen point defects, electrode chemistry, biaxial stress, and electrode capping layers, are highlighted. Herein, discussions will focus on the importance of considering both neutral and charged oxygen vacancies as stabilizing agents, the limited biaxial strain imparted to a hafnia layer by adjacent electrodes, and the strong correlation of biaxial stress with resulting polarization response. Areas needing additional research, such as the necessity for a more quantitative means to distinguish the metastable tetragonal and orthorhombic phases, quantification of oxygen vacancies, and calculation of band structures, including defect energy levels for pure hafnia and stabilized with substituents, are emphasized.

36 MATERIALS SCIENCE↗

Effects of NBI-induced energetic ions on internal kink stability in HL-2M

A systematic investigation is carried out, studying the effect of the neutral beam injection induced energetic particles (EPs) on the n = 1 (n is the toroidal mode number) internal kink (IK) instability in the HL-2M tokamak, utilizing the MARS-F/K code [Liu et al., Phys. Plasmas 7, 3681 (2000) and 15, 112503 (2008)]. A high-beta sawteething HL-2M scenario, simulated by the TRANSP code [Breslau et al. Computer Software (2018)], is chosen for this study. Compared to the fluid model, non-perturbative magnetohydrodynamic (MHD)-kinetic hybrid computations with MARS-K show a generally stabilization effect on the IK, due to drift kinetic resonances associated with EPs. Further, the bounce resonance of trapped EPs has minor influence on the mode stability. In the absence of the plasma equilibrium flow and with the assumed particle pitch distribution, the transit resonance of co-current (countercurrent) passing EPs destabilizes (stabilizes) the IK. With plasma flow, both co- and countercurrent passing EPs tend to stabilize the mode, but the effect is stronger with the countercurrent particles. These modeling results provide useful guidance for interpreting MHD instabilities in the future high-performance experiments in HL-2M.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wehnelt photoemission in an ultrafast electron microscope: Stability and usability

We tested and compared the stability and usability of three different cathode materials and configurations in a thermionic-based ultrafast electron microscope: (1) on-axis thermionic and photoemission from a custom 100 μm diameter LaB 6 source with a graphite guard ring, (2) off-axis photoemission from the Ni aperture surface of the Wehnelt electrode, and (3) on-axis thermionic and photoemission from a custom 200 μm diameter polycrystalline Ta source. For each cathode type and configuration, including the Ni Wehnelt aperture, we illustrate how the photoelectron beam-current stability is deleteriously impacted by simultaneous cooling of the source following thermionic heating. Furthermore, we demonstrate usability via collection of parallel- and convergent-beam electron diffraction patterns and by formation of the optimum probe size. We find that usability of the off-axis Ni Wehnelt-aperture photoemission is at least comparable to on-axis LaB 6 thermionic emission, as well as to on-axis photoemission [the heretofore conventional approach to ultrafast electron microscopy (UEM) in thermionic-based instruments]. However, the stability and achievable beam currents for off-axis photoemission from the Wehnelt aperture were superior to that of the other cathode types and configurations, regardless of the electron-emission mechanism. Beam-current stability for this configuration was found to be ±1% (one standard deviation from the mean) for 70 min (longest duration tested), and steady-state beam current was reached within the sampling-time resolution used here (~1 s) for 15 pA beam currents (i.e., 460 electrons per packet for a 200 kHz repetition rate). Repeatability and robustness of the steady-state condition were also found to be within ±1% of the mean. We discuss the implications of these findings for UEM imaging and diffraction experiments, for pulsed-beam damage measurements, and for practical switching between optimum conventional TEM and UEM operation within the same instrument.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Validation of the GFS model for gyrokinetic stability of NSTX pedestal data

This study presents a large database validation of the gyro fluid system (GFS) model for linear gyrokinetic stability for high-mode (H-mode) edge transport barrier conditions in the national spherical torus experiment (NSTX) tokamak. The database of linear stability calculations with the CGYRO gyrokinetic code was produced using plasma profile measurements from NSTX discharges to identify kinetic ballooning modes (KBM), trapped electron modes (TEM), and micro-tearing modes (MTM) that limit the pressure profile gradient in the H-mode barrier. A novel Bayesian optimization approach determines optimal resolution parameters for GFS specifically for spherical tokamak pedestal conditions. Our results demonstrate that GFS, with optimized resolution, can achieve accurate linear stability analysis in NSTX pedestal conditions for reduced resolution compared to CGYRO. GFS can accurately find the KBM, TEM, and MTM instability branches. Parametric analysis reveals that GFS accuracy in this extreme pedestal parameter range is degraded for low magnetic shear and near the separatrix conditions. These findings establish GFS as a fast linear eigenmode solver for spherical tokamak pedestal gyrokinetic stability and demonstrate a systematic methodology for determining the optimum resolution settings.

Yang, Minglei [Oak Ridge National Laboratory (ORNL↗

Chemical bond and phase stability of Ga-doped Sm2Fe17Cx magnet

Sm2Fe17C3 phase (2:17) is metastable and exhibits excellent intrinsic hard magnetic properties. Doping elements such as Ga facilitate the formation of a single-phase 2:17 structure in arc-melted Sm2Fe17Cx alloys, which opens a promising route for fabricating fully dense bulk Sm2Fe17Cx magnets via high-temperature techniques such as melting and sintering. First-principles electronic structure calculation indicates that Ga prefers to partially replace Fe at the 9d and 18h crystallographic sites in Sm2Fe17C3 and Sm2Fe17, respectively. This difference in site preference is attributed to the distinct chemical environments surrounding the Fe atoms in the two compounds. Ga substitution favors the Sm–Ga bonding formation while avoiding Ga–C interactions. Doped Ga atoms result in more negative formation energy in Sm2(Fe, Ga)17C3, indicating improved structural stability. Crystal Orbital Hamilton Population analysis reveals that carbon insertion weakens the bonding of Sm-Fe (18h) and Sm-Fe (18f) in Sm2Fe17C3. Ga doping facilitates electron redistribution across chemical bonds, thereby reinforcing Fe(18h)–Sm and Fe(18f)–Sm interactions and stabilizing the carbon-centered octahedral local structure. This synergistic effect contributes significantly to the observed enhancement in phase stability of Sm2(Fe, Ga)17Cx. These findings suggest that chemical bond engineering through the selective doping of Ga can enhance phase stability and facilitate the synthesis of Sm2Fe17C3, providing a viable strategy for developing advanced magnets.

Liu, Xubo [Critical Materials Innovation Hub, Divi↗

Perplexing cooperative folding and stability of a low-sequence complexity, polyproline 2 protein lacking a hydrophobic core

The burial of hydrophobic side chains in a protein core generally is thought to be the major ingredient for stable, cooperative folding. Here, we show that, for the snow flea antifreeze protein (sfAFP), stability and cooperativity can occur without a hydrophobic core, and without α-helices or β-sheets. We report sfAFP has low sequence complexity with 46% glycine and an interior filled only with backbone H-bonds between six polyproline 2 (PP2) helices. However, the protein folds in a kinetically two-state manner and is moderately stable at room temperature. We believe that a major part of the stability arises from the unusual match between residue-level PP2 dihedral angle bias in the unfolded state and PP2 helical structure in the native state. Additional stabilizing factors that compensate for the dearth of hydrophobic burial include shorter and stronger H-bonds, and increased entropy in the folded state. These results extend our understanding of the origins of cooperativity and stability in protein folding, including the balance between solvent and polypeptide chain entropies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calibration of a Linear Free Energy Estimation Approach for Estimating Stability Constants for Metal-Bacterial Surface Complexes

In this study, we use the measured extent of metal adsorption onto bacterial cells to constrain a linear free energy relationship that allows estimation of unknown stability constants for metal-bacterial surface complexes based on the value of corresponding aqueous metal-acetate stability constants. A previous study (Fein et al., 2001) used metal adsorption experiments to constrain a similar relationship, but the experiments were conducted using acid-washed bacteria, and subsequent evidence (Borrok et al., 2004a) shows that the acid-washing step affects the extent of adsorption of a number of metals onto bacterial surfaces. We measured the adsorption of Zn, Ni, Co, Sr, and Nd onto Bacillus subtilis in 0.1 M NaClO 4 as a function of pH and metal:bacterial site ratio, using a non-electrostatic discrete four-site model of the bacterial protonation reactions as a basis for the metal adsorption modeling. The adsorption of the divalent cations (Zn, Ni, Co, and Sr) could best be modeled by considering adsorption reactions involving three sites on the bacterial surface; we used a one-site model to account for the Nd data that covered a more restricted pH range. The calculated stability constants for metal-Site 2 bacterial surface complexes are used to re-calibrate the linear free energy relationship previously defined by Fein et al. (2001). There is a significant difference between the original and the re-calibrated lines for weakly binding cations such as Sr 2+ , but the difference becomes negligible for the stronger-binding cations. Because the linear free energy relationship defined in this study was calibrated from experiments that involved bacteria that were not exposed to acidic conditions, the estimated stability constant values that result from using this relationship are likely to reasonably reflect bacterial adsorption behaviors that occur in realistic geologic settings.

54 ENVIRONMENTAL SCIENCES↗

Prediction of trivalent actinide amino(poly)carboxylate complex stability constants using linear free energy relationships with the lanthanide series

Prediction of Trivalent Actinide Amino(poly)carboxylate Complex Stability Constants Using Linear Free Energy Relationships with the Lanthanide Series Alternative title: LFER Based Prediction of An(III) APC Stability Constants There is a gap in the literature regarding the complexation of amino(poly)carboxylate (APC) ligands with trivalent actinides (An(III))). The chemistry of the An(III) is nearly identical to that of the trivalent lanthanides Lns, but the An(III) express a slight enhancement when binding APC ligands. Presented in this report is a simple method of predicting the stability constants of the An(III), Pu, Am, Cm, Bk and Cf by using linear free energy relationships (LFER) of the An and the lanthanide (Ln) series for 91 APCs. This method produced An stability constants within uncertainty to available literature values for most ligands.

Uhnak, Nic E.↗

Solvent Phase Optimizations Improve Correlations with Experimental Stability Constants for Aqueous Lanthanide Complexes

Stability constants provide insight into ion complexation in water. While computational studies have been shown to model the energy of the complexation successfully using a thermodynamic cycle approach, it does not extend to calculating the stability constants for 1:1 lanthanide to ligand complexes in solution. Using B3LYP and 6-31+G* Pople basis with small core effective core potential (ECP) on the lanthanum ion, and a solvent model based on the full solute electron density (SMD) solvation model we computed and compared with previously published stability constants of the ligands: acetate, acetohydroximate, acetylacetonate, methanoate, tropolonate, hydroxide, catecholate, malonate, oxalate, phthalate, and sulfate. The best R 2 values for the thermodynamic cycle can only be determined by separating the mono and divalent ions to achieve an R 2 value of 0.86 and 0.74 for mono and divalent ions, respectively. We show that by optimizing the lanthanide-ligand structures in implicit solvent, we achieve an improved correlation between experimental and computed stability constants of R 2 value of 0.89 for the combined mono and divalent ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

STABILITY OF THE TOROIDAL MAGNETIC FIELD IN STELLAR RADIATION ZONES

The stability of the magnetic field in radiation zones is of crucial importance for mixing, angular momentum transport, etc. We consider the stability properties of a star containing a predominant toroidal field in spherical geometry by means of a linear stability in the Boussinesq approximation taking into account the effect of thermal conductivity. We calculate the growth rate of instability and analyze in detail the effects of stable stratification and heat transport. We argue that the stabilizing influence of gravity can never entirely suppress the instability caused by electric currents in radiation zones. However, the stable stratification can essentially decrease the growth rate of instability.

79 ASTRONOMY AND ASTROPHYSICS↗

On the stability of a galactic disk in modified gravity

We find the dispersion relation for tightly wound spiral density waves in the surface of rotating, self-gravitating disks in the framework of Modified Gravity (MOG). Also, the Toomre-like stability criterion for differentially rotating disks has been derived for both fluid and stellar disks. More specifically, the stability criterion can be expressed in terms of a matter density threshold over which the instability occurs. In other words the local stability criterion can be written as Σ{sub 0}<Σ{sub crit}(v{sub s},κ,α,μ{sub 0}), where Σ{sub crit} is a function of v{sub s} (sound speed), κ (epicycle frequency) and α and μ{sub 0} are the free parameters of the theory. In the case of a stellar disk the radial velocity dispersion σ{sub r} appears in Σ{sub crit} instead of v{sub s}. We find the exact form of the function Σ{sub crit} for both stellar and fluid self-gravitating disks. Also, we use a sub-sample of THINGS catalog of spiral galaxies in order to compare the local stability criteria. In this perspective, we have compared MOG with Newtonian gravity and investigated the possible and detectable differences between these theories.

79 ASTRONOMY AND ASTROPHYSICS↗

THE STABILITY AND FATES OF HIERARCHICAL TWO-PLANET SYSTEMS

We study the dynamical stability and fates of hierarchical (in semimajor axis) two-planet systems with arbitrary eccentricities and mutual inclinations. We run a large number of long-term numerical integrations and use the Support Vector Machine algorithm to search for an empirical boundary that best separates stable systems from systems experiencing either ejections or collisions with the star. We propose the following new criterion for dynamical stability: a{sub out}(1−e{sub out})/[a{sub in} (1+e{sub in})]>2.4 [max(μ{sub in},μ{sub out})]{sup 1/3} (a{sub out}/a{sub in}){sup 1/2}+1.15, which should be applicable to planet-star mass ratios μ{sub in},μ{sub out}=10{sup −4}−10{sup −2}, integration times up to 10{sup 8} orbits of the inner planet, and mutual inclinations ≲40{sup ∘}. Systems that do not satisfy this condition by a margin of ≳0.5 are expected to be unstable, mostly leading to planet ejections if μ{sub in}>μ{sub out}, while slightly favoring collisions with the star for μ{sub in}<μ{sub out}. We use our numerical integrations to test other stability criteria that have been proposed in the literature and show that our stability criterion performs significantly better for the range of system parameters that we have explored.

79 ASTRONOMY AND ASTROPHYSICS↗

Pedestal stability comparison and ITER pedestal prediction

The pressure at the top of the edge transport barrier (or 'pedestal height') strongly impacts fusion performance, while large edge localized modes (ELMs), driven by the free energy in the pedestal region, can constrain material lifetimes. Accurately predicting the pedestal height and ELM behavior in ITER is an essential element of prediction and optimization of fusion performance. Investigation of intermediate wavelength MHD modes (or 'peeling ballooning' modes) has led to an improved understanding of important constraints on the pedestal height and the mechanism for ELMs. The combination of high-resolution pedestal diagnostics, including substantial recent improvements, and a suite of highly efficient stability codes, has made edge stability analysis routine on several major tokamaks, contributing both to understanding, and to experimental planning and performance optimization. Here we present extensive comparisons of observations to predicted edge stability boundaries on several tokamaks, both for the standard (Type I) ELM regime, and for small ELM and ELM-free regimes. We further discuss a new predictive model for the pedestal height and width (EPED1), developed by self-consistently combining a simple width model with peeling-ballooning stability calculations. This model is tested against experimental measurements, and used in initial predictions of the pedestal height for ITER.

Snyder, P.↗

Analysis of ELM stability with extended MHD models in JET, JT-60U and future JT-60SA tokamak plasmas

The stability with respect to a peeling–ballooning mode (PBM) was investigated numerically with extended MHD simulation codes in JET, JT-60U and future JT-60SA plasmas. The MINERVA-DI code was used to analyze the linear stability, including the effects of rotation and ion diamagnetic drift (${\omega }_{* {\rm{i}}}$), in JET-ILW and JT-60SA plasmas, and the JOREK code was used to simulate nonlinear dynamics with rotation, viscosity and resistivity in JT-60U plasmas. It was validated quantitatively that the ELM trigger condition in JET-ILW plasmas can be reasonably explained by taking into account both the rotation and ${\omega }_{* {\rm{i}}}$ effects in the numerical analysis. When deuterium poloidal rotation is evaluated based on neoclassical theory, an increase in the effective charge of plasma destabilizes the PBM because of an acceleration of rotation and a decrease in ${\omega }_{* {\rm{i}}}$. The difference in the amount of ELM energy loss in JT-60U plasmas rotating in opposite directions was reproduced qualitatively with JOREK. By comparing the ELM affected areas with linear eigenfunctions, it was confirmed that the difference in the linear stability property, due not to the rotation direction but to the plasma density profile, is thought to be responsible for changing the ELM energy loss just after the ELM crash. A predictive study to determine the pedestal profiles in JT-60SA was performed by updating the EPED1 model to include the rotation and ${\omega }_{* {\rm{i}}}$ effects in the PBM stability analysis. It was shown that the plasma rotation predicted with the neoclassical toroidal viscosity degrades the pedestal performance by about 10% by destabilizing the PBM, but the pressure pedestal height will be high enough to achieve the target parameters required for the ITER-like shape inductive scenario in JT-60SA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessing the numerical stability of physics models to equilibrium variation through database comparisons on DIII-D

High fidelity kinetic equilibria are crucial for tokamak modeling and analysis. Manual workflows for constructing kinetic equilibria are time consuming and subject to user error, motivating development of automated equilibrium reconstruction tools to provide accurate and consistent reconstructions for downstream physics analysis. These automated tools also provide access to kinetic equilibria at large database scales, which enables the quantification of general uncertainties arising from equilibrium reconstruction techniques. In this paper, we compare a large database of DIII-D kinetic equilibria generated manually by physics experts to equilibria from automated kinetic reconstruction tools, assessing the impact of reconstruction method on equilibrium parameters and resulting magnetohydrodynamic stability calculations. We find agreement among scalar parameters, whereas profile quantities, such as the bootstrap current, show larger disagreements. We analyze ideal kink and classical tearing stability with DCON and STRIDE respectively, finding that the kink stability calculation is generally more robust than the tearing index Δ' calculation. We find that in 90% of cases, both kink stability classifications are unchanged between the manual expert and automated kinetic equilibria.

CAKE↗

Study of the Alfven eigenmodes stability in CFQS plasma using a Landau closure model

The aim of this study is to analyze the stability of the Alfven eigenmodes (AE) in the Chinese First Quasi-axisymmetric Stellarator (CFQS). The AE stability is calculated using the code FAR3d that solves the reduced MHD equations to describe the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moment for the energetic particles (EP) species including the effect of the helical couplings and acoustic modes. The Landau damping and resonant destabilization effects are added in the model by a given closure relation. The simulation results indicate the destabilization of n = 1 to 4 AEs by EP during the slowing down process, particularly n = 1 and n = 2 toroidal AEs (TAE), n = 3 elliptical AE (EAE) and n = 4 non circular AE (NAE). If the resonance is caused by EPs with an energy above 17 keV (weakly thermalized EP), n = 2 EAEs and n = 3 NAEs are unstable. On the other hand, EPs with an energy below 17 keV (late thermalization stage) lead to the destabilization of n = 3 and n = 4 TAEs. The simulations for an off-axis NBI injection indicate the further destabilization of n = 2 to 4 AEs although the growth rate of the n = 1 AEs slightly decreases, so no clear optimization trend with respect to the NBI deposition region is identified. In addition, n = 2, 4 helical AE (HAE) are unstable above an EP β threshold. Also, if the thermal β of the simulation increases (higher thermal plasma density) the AE stability of the plasma improves. Overall, the simulations including the effect of the finite Larmor radius and electron-ion Landau damping show the stabilization of the n = 1 to 4 EAE/NAEs as well as a decrease of the growth rate and frequency of the n = 1 to 4 BAE/TAEs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Refine your search to explore more results.