Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vortex flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

NAS (Numerical Aerodynamic Simulation Program) technical summaries, March 1989 - February 1990

Given here are selected scientific results from the Numerical Aerodynamic Simulation (NAS) Program's third year of operation. During this year, the scientific community was given access to a Cray-2 and a Cray Y-MP supercomputer. Topics covered include flow field analysis of fighter wing configurations, large-scale ocean modeling, the Space Shuttle flow field, advanced computational fluid dynamics (CFD) codes for rotary-wing airloads and performance prediction, turbulence modeling of separated flows, airloads and acoustics of rotorcraft, vortex-induced nonlinearities on submarines, and standing oblique detonation waves.

Source record↗
NASA NTRS1992

The effects of blowing on delta wing vortices during dynamic pitching at high angles of attack

An experimental investigation was conducted in a water tunnel to identify the effects of apex blowing on two delta-wing models undergoing constant pitch-rate motion. One wing was of 60-degree sweep and the other was of 76-degree sweep. Flow visualization methods were utilized to determine vortex burst locations for a wide range of pitch-up (nose up) and plunge (nose down) rates, apex jet strengths, and blowing directions. Results indicate that blowing along the 60-degree wing vortex core or along the 76-degree wing centerline results in a notable improvement in vortex behavior under both static and dynamic conditions. The results are most dramatic during dynamic plunging (nose down) conditions, where blowing resulted in the reformation of vortices with significant length.

Miller, L. S.↗
NASA NTRS1993

Advanced adaptive computational methods for Navier-Stokes simulations in rotorcraft aerodynamics

A phase 2 research and development effort was conducted in area transonic, compressible, inviscid flows with an ultimate goal of numerically modeling complex flows inherent in advanced helicopter blade designs. The algorithms and methodologies therefore are classified as adaptive methods, which are error estimation techniques for approximating the local numerical error, and automatically refine or unrefine the mesh so as to deliver a given level of accuracy. The result is a scheme which attempts to produce the best possible results with the least number of grid points, degrees of freedom, and operations. These types of schemes automatically locate and resolve shocks, shear layers, and other flow details to an accuracy level specified by the user of the code. The phase 1 work involved a feasibility study of h-adaptive methods for steady viscous flows, with emphasis on accurate simulation of vortex initiation, migration, and interaction. Phase 2 effort focused on extending these algorithms and methodologies to a three-dimensional topology.

Stowers, S. T.↗
NASA NTRS1993

Three-dimensional Structure of Straight and Curved Plane Wakes

Although the plane wake is marked by the formation of strong spanwise vortices, the initially two-dimensional Karman-like vortices soon develop a three-dimensional structure in the form of secondary streamwise vortices. So far, this streamwise vortex structure has been studied mostly through flow visualization and at relatively low Reynolds numbers. The primary objective of the present program was to investigate the origin and evolution of the three-dimensional structure of straight and curved plane wakes at relatively high Reynolds numbers (Re(sub b) = 28,000) through detailed measurements of the mean and turbulent properties at several streamwise locations. The experiments were conducted in three phases. In the first phase, the development of a straight plane wake was investigated. In the second phase, the effects of imposed streamwise curvature on the wake development were examined. The streamwise curvature was of constant radius and very mild in terms of the curvature ratio (b/(square root of R) is less than 2 percent). In both the first and second phases, the role of initial conditions was examined in wakes generated from both untripped (laminar) and tripped (turbulent) initial boundany layers. In the third phase, the effects of injecting streamwise vorticity and the effects of increased Reynolds number on the tripped wake structure and development were investigated.

Weygandt, James H.↗
NASA NTRS1993

Rotorcraft noise: Status and recent developments

This paper briefly reviews rotorcraft noise mechanisms and their approximate importance for different types of rotorcraft in different flight regimes. Discrete noise is due to periodic flow disturbances and includes impulsive noise produced by phenomena which occur during a limited segment of a blade's rotation. Broadband noise results when rotors interact with random disturbances, such as turbulence, which can originate in a variety of sources. The status of analysis techniques for these mechanisms are reviewed. Also, some recent progress is presented on the understanding and analysis of tilt rotor aircraft noise due to: (1) recirculation and blockage effects of the rotor flow in hover; and (2) blade-vortex interactions in forward and descending flight.

George, Albert R.↗
NASA NTRS1998

Numerical Simulations of a Lobed Fuel Injector

Numerical modeling of the nonreactive mixing processes associated with a lobed fuel injector in a coflowing air stream is presented. The lobed fuel injector is a device which generates strong streamwise vorticity, producing locally high strain rates which can enhance the molecular mixing of reactants while delaying ignition in a controlled manner. Vortex element modeling is used to simulate flow field evolution and fuel element mixing characteristics for this lobed fuel injector. Quantitative predictions for vorticity generation and qualitative results for streamwise rollup compare well qualitatively with recent experimental investigations of this flow field [Smith et al, Phys. Fluids 9, 667 (1997)]. Parametric studies of the effects of lobe amplitude-to-wavelength ratio, lobe angle, and lobe shape for given flow conditions suggest that geometrical features may be optimized to enhance mixing and control reaction processes.

Strickland, J. H.↗
NASA NTRS1998

Computational Investigation and Validation of Twin-Tail Buffet Response Including Dynamics and Control

Multidisciplinary tools for prediction of single rectangular-tail buffet are extended to single swept-back-tail buffet in transonic-speed flow, and multidisciplinary tools for prediction and control of twin-tail buffet are developed and presented. The configuration model consists of a sharp-edged delta wing with single or twin tails that are oriented normal to the wing surface. The tails are treated as cantilevered beams fixed at the root and allowed to oscillate in both bending and torsion. This complex multidisciplinary problem is solved sequentially using three sets of equations on a dynamic single or multi-block grid structure. The first set is the unsteady, compressible, Reynolds-averaged Navier-Stokes equations which are used for obtaining the flow field vector and the aerodynamic loads on the tails. The Navier-Stokes equations are solved accurately in time using the implicit, upwind, flux-difference splitting, finite volume scheme. The second set is the coupled bending and torsion aeroelastic equations of cantilevered beams which are used for obtaining the bending and torsion deflections of the tails. The aeroelastic equations'are solved accurately in time using, a fifth-order-accurate Runge-Kutta scheme. The third set is the grid-displacement equations and the rigid-body dynamics equations, which are used for updating the grid coordinates due to the tail deflections and rigid-body motions. The tail-buffet phenomenon is predicted for highly-swept, single vertical tail placed at the plane of geometric symmetry, and for highly-swept, vertical twin tails placed at three different spanwise separation distances. The investigation demonstrates the effects of structural inertial coupling and uncoupling of the bending and torsion modes of vibration, spanwise positions of the twin-tail, angle of attack, and pitching and rolling dynamic motions of the configuration model on the tail buffet loading and response. The fundamental issue of twin-tail buffet alleviation is addressed using two active flow-control methods. These methods are the tangential leading-edge blowing and the flow suction from the leading-edge vortex cores along their paths. Qualitative and quantitative comparisons with the available experimental data are presented. The comparisons indicate that the present multidisciplinary aeroelastic analysis tools are robust, accurate and efficient.

Kandil, Osama A.↗
NASA NTRS2001

Dynamic Magnetic Field Applications for Materials Processing

Magnetic fields, variable in time and space, can be used to control convection in electrically conducting melts. Flow induced by these fields has been found to be beneficial for crystal growth applications. It allows increased crystal growth rates, and improves homogeneity and quality. Particularly beneficial is the natural convection damping capability of alternating magnetic fields. One well-known example is the rotating magnetic field (RMF) configuration. RMF induces liquid motion consisting of a swirling basic flow and a meridional secondary flow. In addition to crystal growth applications, RMF can also be used for mixing non-homogeneous melts in continuous metal castings. These applied aspects have stimulated increasing research on RMF-induced fluid dynamics. A novel type of magnetic field configuration consisting of an axisymmetric magnetostatic wave, designated the traveling magnetic field (TMF), has been recently proposed. It induces a basic flow in the form of a single vortex. TMF may find use in crystal growth techniques such as the vertical Bridgman (VB), float zone (FZ), and the traveling heater method. In this review, both methods, RMF and TMF are presented. Our recent theoretical and experimental results include such topics as localized TMF, natural convection dumping using TMF in a vertical Bridgman configuration, the traveling heater method, and the Lorentz force induced by TMF as a function of frequency. Experimentally, alloy mixing results, with and without applied TMF, will be presented. Finally, advantages of the traveling magnetic field, in comparison to the more mature rotating magnetic field method, will be discussed.

Mazuruk, K.↗
NASA NTRS2003

Implementation of Preconditioned Dual-Time Procedures in OVERFLOW

Preconditioning methods have become the method of choice for the solution of flowfields involving the simultaneous presence of low Mach and transonic regions. It is well known that these methods are important for insuring accurate numerical discretization as well as convergence efficiency over various operating conditions such as low Mach number, low Reynolds number and high Strouhal numbers. For unsteady problems, the preconditioning is introduced within a dual-time framework wherein the physical time-derivatives are used to march the unsteady equations and the preconditioned time-derivatives are used for purposes of numerical discretization and iterative solution. In this paper, we describe the implementation of the preconditioned dual-time methodology in the OVERFLOW code. To demonstrate the performance of the method, we employ both simple and practical unsteady flowfields, including vortex propagation in a low Mach number flow, flowfield of an impulsively started plate (Stokes' first problem) arid a cylindrical jet in a low Mach number crossflow with ground effect. All the results demonstrate that the preconditioning algorithm is responsible for improvements to both numerical accuracy and convergence efficiency and, thereby, enables low Mach number unsteady computations to be performed at a fraction of the cost of traditional time-marching methods.

Pandya, Shishir A.↗
NASA NTRS2005

CFD Validation with LDV Test Data for Payload/Fairing Internal Flow

Flowfield testing of a 1/5th scale model of a payload/fairing configuration, typical of an expendable launch vehicle, has been performed. Two-dimensional (planar) velocity measurements were carried out in four planes with the aid of Laser Doppler Velocimetry (LDV). Computational Fluid Dynamics (CFD) analysis results for the scale model flowfleld are compared with the test data. The CFD results are in general agreement with the test data. The ability of the CFD methodology in identifying the global flow features (including critical points such as vortex, saddle point, etc.) has been demonstrated. Practical problems and difficulties associated with the LDV method applied to the complex geometry under consideration have been summarized.

Kandula, max↗
NASA NTRS2012

Development and Application of LES for the Unsteady Flows in Turbomachinery

Recent progress in applying the Large Eddy Simulation (LES) to flow control in turbomachinery is reviewed. The development of flow control in turbomachinery requires accurate prediction of detailed three-dimensional flow structures including unsteady motion of various vortex systems. It has been shown that LES provides more realistic description of the complex flowfields compared to steady and unsteady Reynolds-averaged Navier- Stokes simulations (RANS & URANS).

Hah, Chunill↗
NASA NTRS1985

A critical evaluation of various turbulence models as applied to internal fluid flows

Models employed in the computation of turbulent flows are described and their application to internal flows is evaluated by examining the predictions of various turbulence models in selected flow configurations. The main conclusions are: (1) the k-epsilon model is used in a majority of all the two-dimensional flow calculations reported in the literature; (2) modified forms of the k-epsilon model improve the performance for flows with streamline curvature and heat transfer; (3) for flows with swirl, the k-epsilon model performs rather poorly; the algebraic stress model performs better in this case; and (4) for flows with regions of secondary flow (noncircular duct flows), the algebraic stress model performs fairly well for fully developed flow, for developing flow, the algebraic stress model performance is not good; a Reynolds stress model should be used. False diffusion and inlet boundary conditions are discussed. Countergradient transport and its implications in turbulence modeling is mentioned. Two examples of recirculating flow predictions obtained using PHOENICS code are discussed. The vortex method, large eddy simulation (modeling of subgrid scale Reynolds stresses), and direct simulation, are considered. Some recommendations for improving the model performance are made. The need for detailed experimental data in flows with strong curvature is emphasized.

Nallasamy, M.↗
NASA NTRS1980

Longhorn Business Jets

Developed in NASA's Aircraft Energy Efficiency program and manufactured by Gates Learjet Corporation, the winglet is an aerodynamic innovation designed to reduce fuel consumption and improve airplane performance. Winglets are lifting surfaces designed to operate in the "vortex" or air whirlpool which occurs at an airplane's wingtip. Complex flow of air around wingtip creates drag which retards the plane's progress. Winglet reduces strength of vortex and thereby reduces strength of drag. Additionally, winglet generates its own lift, producing forward thrust in the manner of a boat's sail. Combination of reduced drag and additional thrust adds up to significant improvement in fuel efficiency.

Source record↗
NASA NTRS1985

Flow past a flat plat with a vortex/sink combination

An attempt was made to model the so called leading edge vortex which forms over the leading edge of delta wings at high angles of attack. A simplified model was considered, namely that of a two-dimensional, inviscid, incompressible steady flow around a flat plate at an angle of attack with a stationary vortex detached on top, as well as a sink to simulate the strong spanwise flow. The results appear to agree qualitatively with experiments. A comparison was also made between the lift and the drag of this model and the corresponding results for two classical solutions: (1) that of totally attached flow over the plate with the Kutta condition satisfied at the trailing edge only; and (2) the Helmholtz solution of totally separated flow over the plate.

Mourtos, N. J.↗
NASA NTRS1984

Flow past a Flat Plate with a Vortex/sink Combination

An attempt was made to model the so called leading edge vortex which forms over the leading edge of delta wings at high angles of attack. A simplified model was considered, namely that of a two-dimensional, inviscid, incompressible steady flow around a flat plate at an angle of attack with a stationary vortex detached on top, as well as a sink to simulate the strong spanwise flow. The results appear to agree qualitatively with experiments. A comparison was also made between the lift and the drag of this model and the corresponding results for two classical solutions: (1) that of totally attached flow over the plate with the Kutta condition satisfied at the trailing edge only: and (2) the Helmholtz solution of totally separated flow over the plate.

Mourtos, N. J.↗
NASA NTRS2020

NASA Exploration Systems & Habitation (X-Hab)Academic Innovation Challenge 2020: Microgravity Gas/Liquid Separator for the CO2 Revitalization System Final Report

This report outlines the efforts of UNT X-Hab Team on a project titled, Microgravity Gas/Liquid Separator for the CO2 Revitalization System. The project is executed as a senior design project during academic year 2019-2020. The X-Hab 2020 Academic Innovation Challenge has selected eleven senior design teams from colleges across the US to demonstrate working prototypes for exploration systems and habitation. UNT has been tasked with the creation of a gas-liquid separator for an air revitalization system. Air revitalization technology has been used to support spaceflight by removing CO2 from enclosed systems in order to maintain breathable air. Solid sorbents such as zeolites or lithium hydroxide have been used in the past for these systems but are difficult to handle in microgravity environments and require a large amount of energy. This challenge aims to demonstrate vortex phase separator (VPS) technology for removing H2O from a CO2 stream. However, VPS technology also has the capability of using liquid sorbents for removing CO2 from an air stream. Further research could be done on liquid sorbents, such as liquid amine, in use with VPS systems. This would potentially be an alternative technology in replacing use of solid sorbents in CO2 removal systems. In 2019, NASA proposed a design that uses a gas/liquid contactor to allow for efficient contact between the two fluid phase. This was integrated into an overall CO2 removal system. The subsystems for gas-liquid separation and storage in NASA’s previous models for CO2 removal system could be replaced with a VPS. Innovative vortex separator technology is expected to allow for high throughput flow and highly efficient CO2 removal compared to other gas-liquid separation technologies. VPS relies on centripetal driven buoyancy forces to form a gas-liquid vortex within a fixed, right circular cylinder. The gas stream enters the separator through a tangential nozzle and breaks into very small bubbles (<<1 mm) resulting in a very large contact surface area for interaction with the liquid stream via energy and mass exchange. VPS technology can handle mismatches in inlet and outlet flow rates and system volume changes through the range of liquid thickness held in the separator (i.e., buffering and accumulating capability), and requires low pressure differences (<5-10 in H2O in most cases) for operation. The X-Hab 2020 team leverages these characteristics to investigate VPS technology as an alternative CO2 removal technology.

Alyssa Sarvadi↗
NASA NTRS1992

Investigation of forced unsteady separated flows using velocity-vorticity form of Navier-Stokes equations

The phenomenon of forced unsteady separation and eruption of boundary-layer vorticity is a highly-complex, high-Reynolds number flow phenomenon, which abruptly leads to the formation of a dynamic stall vortex as demonstrated earlier by the authors for a NACA 0015 airfoil undergoing constant rate pitch-up motion. This, as well as the results of other researchers, have convincingly demonstrated a complex vortical structure within the state of unsteady separation prior to the evolution of dynamic stall. This phenomenon of vortex eruption, although observed in studying dynamic stall phenomena, is also associated with transition from laminar to turbulence flow and its generic nature has been stressed by many researchers including the present investigators. An unsteady Navier-Stokes (NS) analysis is developed for arbitrarily maneuvering bodies using velocity-vorticity variables; this formulation is nearly form-invariant under a generalized non-inertial coordinate transformation. A fully-implicit uniformly second-order accurate method is used, with the nonlinear convective terms approximated using a biased third-order upwind differencing scheme to be able to simulate higher-Re flows. No explicit artificial dissipation is added. The numerical method is fully vectorized and currently achieves a computational index of 7 micro-seconds per time step per mesh point, using a single processor on a CRAY Y-MP. The simulation results show that the energetic free shear from the leading edge is responsible for the wall viscous layer to abruptly erupt near the center of the counterclockwise rotating eddy in the unsteady boundary layer. Primary, secondary, tertiary and quaternary vortices have been observed before the dynamic stall vortex evolves and gathers its maximum strength. This study will discuss the simulation results of Reynolds number up to Re = 45,000 and will also discuss the efforts of initial acceleration in a specific maneuver, on the evolution of the stall vortex.

Ghia, K. N.↗

Refine your search to explore more results.