Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Depth-dependent atomic valence determination by synchrotron techniques

The properties of many materials can be strongly affected by the atomic valence of the contained individual elements, which may vary at surfaces and other interfaces. These variations can have a critical impact on material performance in applications. In this work, a non-destructive method for the determination of layer-by-layer atomic valence as a function of material thickness is presented for La 0.7 Sr 0.3 MnO 3 (LSMO) thin films. The method utilizes a combination of bulk- and surface-sensitive X-ray absorption spectroscopy (XAS) detection modes; here, the modes are fluorescence yield and surface-sensitive total electron yield. The weighted-average Mn atomic valence as measured from the two modes are simultaneously fitted using a model for the layer-by-layer variation of valence based on theoretical model Hamiltonian calculations. Using this model, the Mn valence profile in LSMO thin film is extracted and the valence within each layer is determined to within an uncertainty of a few percent. The approach presented here could be used to study the layer-dependent valence in other systems or extended to different properties of materials such as magnetism.

Hamiltonian calculations↗

Defect-Enabled Electrical Current Leakage in Ultraviolet Light-Emitting Diodes

The AlGaN materials system offers a tunable, ultra-wide bandgap that is exceptionally useful for high-power electronics and deep ultraviolet optoelectronics. Moseley et al. (pp. 723–726) investigate a structural defect known as an open-core threading dislocation or ''nanopipe'' that is particularly detrimental to devices that employ these materials. Furthermore, an AlGaN thin film was synthesized using metal-organic chemical-vapor deposition. Electrical current leakage is detected at a discrete point using a conductive atomic-force microscope (CAFM). However, no physical feature or abnormality at this location was visible by an optical microscope. The AlGaN thin film was then etched in hot phosphoric acid, and the same location that was previously analyzed was revisited with the CAFM. The point that previously exhibited electrical current leakage had been decorated with a 1.1 μm wide hexagonal pit, which identified the site of electrical current leakage as a nanopipe and allows these defects to be easily observed by optical microscopy. Moreover, with this nanopipe identification and quantification strategy, the authors were able to correlate decreasing ultraviolet light-emitting diode optical output power with increasing nanopipe density.

36 MATERIALS SCIENCE↗

Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin-film with p-type semiconducting nature and metal-like conductivity

Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM). Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH{sub 3}NH{sub 3}SnI{sub 3} film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microscopy (SEM) confirmed a structure of this compound and uniform film formation. The morphology, film uniformity, light harvesting and electrical properties strongly depend on preparation method and precursor solution. CH{sub 3}NH{sub 3}SnI{sub 3} films prepared based on dimethylformamide (DMF) showed higher crystallinity and light harvesting capability compared to the film based on combination of dimethyl sulfoxide (DMSO) with gamma-butyrolactone (GBL). Local photocurrent mapping analysis showed that CH{sub 3}NH{sub 3}SnI{sub 3} can be used as an active layer and have a potential to fabricate lead free photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Thin Alumina Film as a Tritium Adsorption Inhibitor for Stainless Steel 316

The effect of a thin alumina coating on stainless-steel 316 (SS316) samples on tritium adsorption and transport are discussed. Compact films of alumina were produced on the surfaces of pristine SS316 samples using an atomic layer deposition (ALD) technique. Subsequently, these samples were exposed for 24 hours to a deuterium-tritium gas mixture (P T =0.5 atm, 25°C). A combination of methods including selective-etching and programmed thermal desorption were employed to assess both, the depth profile of the tritium concentration in the sample and the total quantity of tritium absorbed respectively. Tritium was quantitatively determined through the measurement of beta radioactivity using liquid-scintillation counting techniques. Data suggest that SS316 with a thin film of alumina reduces the total tritium uptake by ~25% relative to uncoated samples. Significantly, such films appear to reduce, by a factor of 200, tritium diffusion into SS316 and therefore constitute an effective barrier against tritium transport. This observation is of practical importance for tritium and, generally, reactive gas handling.

36 MATERIALS SCIENCE↗

Band diagram and rate analysis of thin film spinel LiMn 2 O 4 formed by electrochemical conversion of ALD-grown MnO

Nanoscale spinel lithium manganese oxide is of interest as a high-rate cathode material for advanced battery technologies among other electrochemical applications. In this work, the synthesis of ultrathin films of spinel lithium manganese oxide (LiMn 2 O 4 ) between 20 and 200 nm in thickness by room-temperature electrochemical conversion of MnO grown by atomic layer deposition (ALD) is demonstrated. The charge storage properties of LiMn 2 O 4 thin films in electrolytes containing Li + , Na + , K + , and Mg 2+ are investigated. A unified electrochemical band-diagram (UEB) analysis of LiMn 2 O 4 informed by screened hybrid density functional theory calculations is also employed to expand on existing understanding of the underpinnings of charge storage and stability in LiMn 2 O 4 . It is shown that the incorporation of Li + or other cations into the host manganese dioxide spinel structure (λ-MnO 2 ) stabilizes electronic states from the conduction band which align with the known redox potentials of LiMn 2 O 4 . Furthermore, the cyclic voltammetry experiments demonstrate that up to 30% of the capacity of LiMn 2 O 4 arises from bulk electronic charge-switching which does not require compensating cation mass transport. As a result, the hybrid ALD-electrochemical synthesis, UEB analysis, and unique charge storage mechanism described here provide a fundamental framework to guide the development of future nanoscale electrode materials for ion-incorporation charge storage.

36 MATERIALS SCIENCE↗

Atomic Layer Etching at the Tipping Point: An Overview

The ability to achieve near-atomic precision in etching different materials when transferring lithographically defined templates is a requirement of increasing importance for nanoscale structure fabrication in the semiconductor and related industries. The use of ultra-thin gate dielectrics, ultra thin channels, and sub-20 nm film thicknesses in field effect transistors and other devices requires near-atomic scale etching control and selectivity. There is an emerging consensus that as critical dimensions approach the sub-10 nm scale, the need for an etching method corresponding to Atomic Layer Deposition (ALD), i.e. Atomic Layer Etching (ALE), has become essential, and that the more than 30-year quest to complement/replace continuous directional plasma etching (PE) methods for critical applications by a sequence of individual, self-limited surface reaction steps has reached a crucial stage. A key advantage of this approach relative to continuous PE is that it enables optimization of the individual steps with regard to reactant adsorption, self-limited etching, selectivity relative to other materials, and damage of critical surface layers. In this overview we present basic approaches to ALE of materials, discuss similarities/crucial differences relative to thermal and plasma-enhanced ALD, and then review selected results on ALE of materials aimed at pattern transfer. Furthermore, the overview concludes with a discussion of opportunities and challenges ahead.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic Conductivity of Nanoporous Indium Oxide Derived from Sequential Infiltration Synthesis

Sequential infiltration synthesis (SIS) is a vapor phase synthetic method that enables the selective nucleation and growth of metal oxides within polymer volumes. The expanding palette of SIS materials and process designs enables tunability of the resulting material properties. We derive porous indium oxide thin films from the SIS of indium oxide using trimethyl indium and H 2 O 2 in polymethyl methacrylate films and observe the strong effect of SIS and post-deposition processing, which affords 7 orders of magnitude of tunability in electrical resistivity. While as-deposited hybrid nanocomposites show no measurable conductivity, high-temperature treatment in O 2 removes the polymer matrix and creates a porous nanocrystalline In 2 O 3 film with resistivities ranging from 10 3 to 10 5 Ω*cm, with lower resistivity correlated to larger grain sizes. Subsequent annealing in H 2 decreases the resistivity of films to less than 10 –2 Ω*cm. A clear correlation between increasing In 2 O 3 volume fraction, grain size, and carrier mobility is observed, which arises from increased percolation pathways, path length, and contact area in nanocrystalline In 2 O 3 films. Furthermore, this wide tunability demonstrates the importance of understanding growth mechanisms and processing conditions for functional materials development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3p valence photoelectron spectrum of Ar clusters

The shape of the outer valence (3p) photoelectron spectrum of Ar clusters is investigated by vacuum ultraviolet photoionization with synchrotron radiation. We show the dependence of the spectrum on cluster size and the change in its shape with photon energy. Inelastic losses due to intracluster photoelectron scattering are most important for changes in the photoelectron main line and explain the appearance of additional peaks. A comparison of our results to earlier work on bulk condensed Ar and Ar thin films is given. Evidence for a deviation of the photoionization cross sections for clusters from the atomic ones has not been found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermochromic undoped and Mg-doped VO{sub 2} thin films and nanoparticles: Optical properties and performance limits for energy efficient windows

Undoped and Mg-doped thermochromic VO{sub 2} films with atom ratios z ≡ Mg/(Mg + V) of 0 ≤ z < 0.21 were deposited by reactive DC magnetron sputtering onto heated glass and carbon substrates. Elemental compositions were found by Rutherford backscattering spectrometry. Optical constants were determined from transmittance and reflectance measurements and were used for modeling the optical properties of thin films and dilute nanoparticle composite layers below and above the critical temperature for thermochromic switching between a low-temperature infrared transparent state and a high-temperature infrared reflecting or absorbing state. Mg-doped films showed superior luminous transmittance T{sub lum} and solar transmittance modulation ΔT{sub sol} compared to undoped VO{sub 2} films, and both of these parameters could be further enhanced by anti-reflection. VO{sub 2}-containing nanocomposites had much larger values of T{sub lum} and ΔT{sub sol} than VO{sub 2}-based films. Mg-doping was found to erode the properties of the nanocomposites. Approximate performance limits are given on T{sub lum} and ΔT{sub sol} for thermochromic VO{sub 2} films, with and without Mg doping and antireflection coating, and also for VO{sub 2}-containing dilute nanocomposites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Water oxidation by size selected Co 27 clusters supported on Fe 2 O 3

The complexity of the water oxidation reaction makes understanding the role of individual catalytic sites critical to improving the process. Here, size-selected 27-atom cobalt clusters (Co 27 ) deposited on hematite (Fe 2 O 3 ) anodes were tested for water oxidation activity. The uniformity of these anodes allows measurement of the activity of catalytic sites of well-defined nuclearity and known density. Grazing incidence X-ray absorption near-edge spectroscopy (GIXANES) characterization of the anodes before and after electrochemical cycling demonstrates that these Co 27 clusters are stable to dissolution even in the harsh water oxidation electrochemical environment. They are also stable under illumination at the equivalent of 0.4suns irradiation. The clusters show turnover rates for water oxidation that are comparable or higher than those reported for Pd- and Co-based materials or for hematite. The support for the Co 27 clusters is Fe 2 O 3 grown by atomic layer deposition on a Si chip. We have chosen to deposit a Fe2O3 layer that is only a few unit cells thick (2nm), to remove complications related to exciton diffusion. We find that the electrocatalytic and the photoelectrocatalytic activity of the Co 27 /Fe 2 O 3 material is significantly improved when the samples are annealed (with the clusters already deposited). Lastly, given that the support is thin and that the cluster deposition density is equivalent to approximately 5% of an atomic monolayer, we suggest that annealing may significantly improve the exciton diffusion from the support to the catalytic moiety.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial stabilization of ultra thin films of high entropy perovskite

High entropy oxides (HEOs) are a class of materials, containing equimolar portions of five or more transition metal and/or rare-earth elements. We report here about the layer-by-layer growth of HEO [(La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 ] thin films on NdGaO 3 substrates by pulsed laser deposition. The combined characterizations with in situ reflection high energy electron diffraction, atomic force microscopy, and x-ray diffraction affirm the single crystalline nature of the film with smooth surface morphology. The desired +3 oxidation of Ni has been confirmed by an element sensitive x-ray absorption spectroscopy measurement. Temperature dependent electrical transport measurements revealed a first order metal-insulator transition with the transition temperature very similar to the undoped NdNiO 3 . Furthermore, since both these systems have a comparable tolerance factor, this work demonstrates that the electronic behaviors of A-site disordered perovskite-HEOs are primarily controlled by the average tolerance factor.

36 MATERIALS SCIENCE↗

Role of oxygen concentrations on structural and optical properties of RF magnetron sputtered ZnO thin films

We report an investigation on the effect of oxygen flow rate on the structural and optical properties of zinc oxide thin films prepared by RF magnetron sputtering. The structural measurements were carried using grazing incidence X-ray diffraction, atomic force microscopy and Raman spectroscopy. The role of oxygen partial pressure on the crystallinity, the surface morphology and vibrational modes has been established. The optical properties of the films were investigated using FR-Basic-VIS/NIR fitted with FR-Monitor software for film thickness, refractive index and color determination. The film thickness is observed to increase when oxygen is introduced at 4 sccm but eventual decrease with increase in the flow rate an indication of initial increase in rate of deposition followed by reduction. Elaborate explanations of these trends are provided.

36 MATERIALS SCIENCE↗

Towards scanning nanostructure X-ray microscopy

This article demonstrates spatial mapping of the local and nanoscale structure of thin film objects using spatially resolved pair distribution function (PDF) analysis of synchrotron X-ray diffraction data. This is exemplified in a lab-on-chip combinatorial array of sample spots containing catalytically interesting nanoparticles deposited from liquid precursors using an ink-jet liquid-handling system. A software implementation is presented of the whole protocol, including an approach for automated data acquisition and analysis using the atomic PDF method. The protocol software can handle semi-automated data reduction, normalization and modeling, with user-defined recipes generating a comprehensive collection of metadata and analysis results. By slicing the collection using included functions, it is possible to build images of different contrast features chosen by the user, giving insights into different aspects of the local structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrooxidation of CO on Platinum Nanoparticles Supported on NiO Thin Films

In this paper, we report on a robust experimental model to investigate strong metal–support interactions (SMSI) and their effect on electrocatalytic reactions in the absence and presence of direct contact between the nanoparticles (NPs) and the metal oxide thin film. Specifically, we describe beneficial interactions between Ni 0.9 O thin film supports and PtNPs toward the CO electrooxidation reaction. The metal oxide layer (Ni 0.9 O) is prepared by atomic layer deposition and characterized using X-ray photoelectron spectroscopy (XPS). PtNPs, containing an average of either 55 (Pt 55 ) or 140 (Pt 140 ) atoms, were synthesized using a dendrimer encapsulation method. The results indicate negative shifts of ~100 and ~60 mV of the CO electrooxidation peak potential when Ni 0.9 O thin films are in contact with Pt 55 NPs and Pt 140 NPs, respectively. Additionally, the oxygen evolution reaction (OER) is suppressed only when the PtNPs are in contact with the Ni 0.9 O thin film. Density functional theory (DFT) calculations indicate that both the CO electrooxidation enhancement and suppression of the OER can be attributed to a 1.23 eV decrease of the CO* binding energy and a 0.35 eV increase of the OH* binding energy at a NiO(111)/Pt 55 NP interface compared to isolated Pt 55 NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

XPS study of thermal and electron-induced decomposition of Ni and Co acetylacetonate thin films for metal deposition

Optimizing thin metal film deposition techniques from metal-organic precursors such as atomic layer deposition, chemical vapor deposition (CVD), or electron beam-induced deposition (EBID) with the help of surface science analysis tools in ultrahigh vacuum requires a contamination-free precursor delivery technique, especially in the case of the less volatile precursors. For this purpose, the preparation of layers of undecomposed Ni(acac){sub 2} and Co(acac){sub 2} was tried via pulsed spray evaporation of a liquid solution of the precursors in ethanol into a flow of nitrogen on a CVD reactor. Solvent-free layers of intact precursor molecules were obtained when the substrate was held at a temperature of 115 °C. A qualitative comparison of thermally initiated and electron-induced precursor decomposition and metal center reduction was carried out. All deposited films were analyzed with respect to chemical composition quasi in situ by x-ray photoelectron spectroscopy. Thermally initiated decomposition yielded higher metal-to-metal oxide ratios in the deposit than the electron-induced process for which ratios of 60:40 and 20:80 were achieved for Ni and Co, resp. Compared to continuous EBID processes, all deposits showed low levels of carbon impurities of ∼10 at. %. Therefore, postdeposition irradiation of metal acetylacetonate layers by a focused electron beam and subsequent removal of intact precursor by dissolution in ethanol or by heating is proposed as electron beam lithography technique on the laboratory scale for the production of the metal nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The atomic structure, band gap, and electrostatic potential at the (112)[11{sup ¯}0] twin grain boundary of CuInSe{sub 2}

To develop a higher efficiency thin-film compound photovoltaic (PV) cell, it is crucial to understand not only the key factors determining the stability of the grain boundary (GB) but also the band gap and band bending at the GB in the photoabsorption layer. In this study, we investigate the atomic structure, band gap, and electrostatic potential at the (112)[11{sup ¯}0] twin GB of CuInSe{sub 2} (CIS), which is typically used in the photoabsorption layer in thin-film compound PV cells. We utilize aberration-corrected scanning transmission electron microscopy and first-principles hybrid-functional calculations. We find that the formation energies of the twin GB in CIS are very small: 0.03–0.15 J/m{sup 2}. The local coordination of the Se at the GB is a primary factor modulating the GB energy, band gap, and the electrostatic potential at the GB.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.