Search NASA⌕ Search

SEARCH · Search NASA

Results for “comparisons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Quantifying the indirect impacts of climate on agriculture: an inter-method comparison

Climate change and increases in CO2 concentration affect the productivity of land, with implications for land use, land cover, and agricultural production. Much of the literature on the effect of climate on agriculture has focused on linking projections of changes in climate to process-based or statistical crop models. However, the changes in productivity have broader economic implications that cannot be quantified in crop models alone. How important are these socio-economic feedbacks to a comprehensive assessment of the impacts of climate change on agriculture? In this paper, we attempt to measure the importance of these interaction effects through an inter-method comparison between process models, statistical models, and integrated assessment model (IAMs). We find the impacts on crop yields vary widely between these three modeling approaches. Yield impacts generated by the IAMs are 20%-40% higher than the yield impacts generated by process-based or statistical crop models, with indirect climate effects adjusting yields by between - 12% and + 15% (e.g. input substitution and crop switching). The remaining effects are due to technological change.

54 ENVIRONMENTAL SCIENCES↗

Carbon flux estimates are sensitive to data source: a comparison of field and lab temperature sensitivity data

Abstract A large literature exists on mechanisms driving soil production of the greenhouse gases CO 2 and CH 4 . Although it is common knowledge that measurements obtained through field studies vs. laboratory incubations can diverge because of the vastly different conditions of these environments, few studies have systematically examined these patterns. These data are used to parameterize and benchmark ecosystem- to global-scale models, which are then susceptible to the biases of the source data. Here, we examine how greenhouse gas measurements may be influenced by whether the measurement/incubation was conducted in the field vs. laboratory, focusing on CO 2 and CH 4 measurements. We use Q 10 of greenhouse gas flux (temperature sensitivity) for our analyses because this metric is commonly used in biological and Earth system sciences and is an important parameter in many modeling frameworks. We predicted that laboratory measurements would be less variable, but also less representative of true field conditions. However, there was greater variability in the Q 10 values calculated from lab-based measurements of CO 2 fluxes, because lab experiments explore extremes rarely seen in situ , and reflect the physical and chemical disturbances occurring during sampling, transport, and incubation. Overall, respiration Q 10 values were significantly greater in laboratory incubations (mean = 4.19) than field measurements (mean = 3.05), with strong influences of incubation temperature and climate region/biome. However, this was in part because field measurements typically represent total respiration (Rs), whereas lab incubations typically represent heterotrophic respiration (Rh), making direct comparisons difficult to interpret. Focusing only on Rh-derived Q 10 , these values showed almost identical distributions across laboratory ( n = 1110) and field ( n = 581) experiments, providing strong support for using the former as an experimental proxy for the latter, although we caution that geographic biases in the extant data make this conclusion tentative. Due to a smaller sample size of CH 4 Q 10 data, we were unable to perform a comparable robust analysis, but we expect similar interactions with soil temperature, moisture, and environmental/climatic variables. Our results here suggest the need for more concerted efforts to document and standardize these data, including sample and site metadata.

54 ENVIRONMENTAL SCIENCES↗

COMPARISON OF HECTOSPEC VIRIAL MASSES WITH SUNYAEV-ZEL'DOVICH EFFECT MEASUREMENTS

We present the first comparison of virial masses of galaxy clusters with their Sunyaev-Zel'dovich Effect (SZE) signals. We study 15 clusters from the Hectospec Cluster Survey (HeCS) with MMT/Hectospec spectroscopy and published SZE signals. We measure virial masses of these clusters from an average of 90 member redshifts inside the radius r {sub 100}. The virial masses of the clusters are strongly correlated with their SZE signals (at the 99% confidence level using a Spearman rank-sum test). This correlation suggests that Y {sub SZ} can be used as a measure of virial mass. Simulations predict a power-law scaling of Y {sub SZ} {proportional_to} M {sup {alpha}} {sub 200} with {alpha} {approx} 1.6. Observationally, we find {alpha} = 1.11 {+-} 0.16, significantly shallower (given the formal uncertainty) than the theoretical prediction. However, the selection function of our sample is unknown and a bias against less massive clusters cannot be excluded (such a selection bias could artificially flatten the slope). Moreover, our sample indicates that the relation between velocity dispersion (or virial mass estimate) and SZE signal has significant intrinsic scatter, comparable to the range of our current sample. More detailed studies of scaling relations are therefore needed to derive a robust determination of the relation between cluster mass and SZE.

79 ASTRONOMY AND ASTROPHYSICS↗

GIANT PLANET FORMATION BY DISK INSTABILITY: A COMPARISON SIMULATION WITH AN IMPROVED RADIATIVE SCHEME

There has been disagreement about whether cooling in protoplanetary disks can be sufficiently fast to induce the formation of gas giant protoplanets via gravitational instabilities. Simulations by our own group and others indicate that this method of planet formation does not work for disks around young, low-mass stars inside several tens of AU, while simulations by other groups show fragmentation into protoplanetary clumps in this region. To allow direct comparison in hopes of isolating the cause of the differences, we here present a high-resolution three-dimensional hydrodynamics simulation of a protoplanetary disk, where the disk model, initial perturbation, and simulation conditions are essentially identical to those used in a recent set of simulations by Boss in 2007, hereafter B07. As in earlier papers by the same author, B07 purports to show that cooling is fast enough to produce protoplanetary clumps. Here, we evolve the same B07 disk using an improved version of one of our own radiative schemes and find that the disk does not fragment in our code but instead quickly settles into a state with only low amplitude nonaxisymmetric structure, which persists for at least several outer disk rotations. We see no rapid radiative or convective cooling. We conclude that the differences in results are due to different treatments of regions at and above the disk photosphere, and we explain at least one way in which the scheme in B07 may lead to artificially fast cooling.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPARISON BETWEEN OBSERVATION AND SIMULATION OF MAGNETIC FIELD CHANGES ASSOCIATED WITH FLARES

It has been a long-standing question in solar physics how magnetic field structure changes with eruptive events (e.g., flares and coronal mass ejections). In this Letter, we present the eruption-associated changes in the magnetic inclination angle, the horizontal component of magnetic field vectors, and the Lorentz force. The analysis is based on the observation of the X3.4 flare on 2006 December 13 and in comparison to the numerical simulation of Fan. Both observation and simulation show that (1) the magnetic inclination angle in the decayed peripheral penumbra increases, while that in the central area close to the flaring polarity inversion line (PIL) deceases after the flare; (2) the horizontal component of magnetic field increases at the lower altitude near the flaring PIL after the flare. The result suggests that the field lines at the flaring neutral line turn to more horizontal near the surface, that is in agreement with the prediction of Hudson et al.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DIAGNOSTIC O VI ABSORPTION LINE IN DIFFUSE PLASMAS: COMPARISON OF NON-EQUILIBRIUM IONIZATION STRUCTURE SIMULATIONS TO FUSE DATA

The nature of the interstellar O VI in the Galactic disk is studied by means of a multi-fluid hydrodynamical approximation, tracing the detailed time-dependent evolution of the ionization structure of the plasma. Our focus is to explore the signature of any non-equilibrium ionization condition present in the interstellar medium using the diagnostic O VI ion. A detailed comparison between the simulations and FUSE data is carried out by taking lines of sight (LOS) measurements through the simulated Galactic disk, covering an extent of 4 kpc from different vantage points. The simulation results bear a striking resemblance with the observations: (1) the N(O VI) distribution with distance and angle fall within the minimum and maximum values of the FUSE data; (2) the column density dispersion with distance is constant for all the LOS, showing a mild decrease at large distances; (3) O VI has a clumpy distribution along the LOS; and (4) the time-averaged midplane density for distances >400 pc has a value of (1.3-1.4) Multiplication-Sign 10{sup -8} cm{sup -3}. The highest concentration of O VI by mass occurs in the thermally stable (10{sup 3.9} K < T {<=} 10{sup 4.2} K; 20%) and unstable (10{sup 4.2} K < T < 10{sup 5} K; 50%) regimes, both well below its peak temperature in collisional ionization equilibrium, with the corresponding volume filling factors oscillating with time between 8%-20% and 4%-5%, respectively. These results may also be relevant for intergalactic metal absorption systems at high redshifts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MATCHING THE DARK MATTER PROFILES OF dSph GALAXIES WITH THOSE OF SIMULATED SATELLITES: A TWO-PARAMETER COMPARISON

We compare the dark matter halos’ structural parameters derived for four Milky Way dwarf spheroidal galaxies to those of subhalos found in cosmological N-body simulations. We confirm that estimates of the mass at a single fixed radius are fully consistent with the observations. However, when a second structural parameter such as the logarithmic slope of the dark halo density profile measured close to the half-light radius is included in the comparison, we find little to no overlap between the satellites and the subhalos. Typically the right mass subhalos have steeper profiles at these radii than measurements of the dSph suggest. Using energy arguments we explore if it is possible to solve this discrepancy by invoking baryonic effects. Assuming that feedback from supernovae (SNe) can lead to a reshaping of the halos, we compute the required efficiency and find entirely plausible values for a significant fraction of the subhalos and even as low as 0.1%. This implies that care must be taken not to exaggerate the effect of SNe feedback as this could make the halos too shallow. These results could be used to calibrate and possibly constrain feedback recipes in hydrodynamical simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Whole-Genome Comparisons of Ergot Fungi Reveals the Divergence and Evolution of Species within the Genus Claviceps Are the Result of Varying Mechanisms Driving Genome Evolution and Host Range Expansion

The genus Claviceps has been known for centuries as an economically important fungal genus for pharmacology and agricultural research. Only recently have researchers begun to unravel the evolutionary history of the genus, with origins in South America and classification of four distinct sections through ecological, morphological, and metabolic features (Claviceps sects. Citrinae, Paspalorum, Pusillae, and Claviceps). The first three sections are additionally characterized by narrow host range, whereas section Claviceps is considered evolutionarily more successful and adaptable as it has the largest host range and biogeographical distribution. However, the reasons for this success and adaptability remain unclear. Our study elucidates factors influencing adaptability by sequencing and annotating 50 Claviceps genomes, representing 21 species, for a comprehensive comparison of genome architecture and plasticity in relation to host range potential. Our results show the trajectory from specialized genomes (sects. Citrinae and Paspalorum) toward adaptive genomes (sects. Pusillae and Claviceps) through colocalization of transposable elements around predicted effectors and a putative loss of repeat-induced point mutation resulting in unconstrained tandem gene duplication coinciding with increased host range potential and speciation. Alterations of genomic architecture and plasticity can substantially influence and shape the evolutionary trajectory of fungal pathogens and their adaptability. Furthermore, our study provides a large increase in available genomic resources to propel future studies of Claviceps in pharmacology and agricultural research, as well as, research into deeper understanding of the evolution of adaptable plant pathogens.

59 BASIC BIOLOGICAL SCIENCES↗

A semblance measure for model comparison

Algorithmic and computational advances have made it possible that geophysical survey and earth model design can be aided by many systematic trial inverse-modelling runs with synthetic data. Such may, for example, come up in machine-learning approaches. Automated image appraisal pertaining to such applications will involve common statistical tests for goodness-of-data fit as a primary evaluation method. However, solution non-uniqueness may render multiple images equivalent in terms of their data fit, requiring secondary categorizers. A logical choice for classifying synthetic-imaging results quantifies the goodness of model fit where a known reference model replaces the observational input. The task of model intercomparison in terms of measuring the resemblance to the reference model poses challenges to common distance-based metrics like root mean square error and mean absolute error. First, distance-based metrics can introduce spurious contributions when smooth models with fuzzy target contours are to be compared against a sharp reference. Second, large differences due to parameter-estimation overshoots can dominate distance metrics. Here, we propose a remedy that is referred to as semblance and is based on the idea of logistic functions, where a binary-dependent variable adds non-zero or zero accumulation terms for the, respectively, passing or failing of preset target thresholds. This classifying approach is amenable to an objective where model feature recognition is primary. Numerical comparisons to distance-based metrics provide evidence for the advantages of the semblance in view of this objective. Geophysical imaging in conjunction with machine-learning is seen as a benefitting upcoming application area.

58 GEOSCIENCES↗

A comparison of earthquake backprojection imaging methods for dense local arrays

Backprojection imaging has recently become a practical method for local earthquake detection and location due to the deployment of densely sampled, continuously recorded, local seismograph arrays. While backprojection sometimes utilizes the full seismic waveform, the waveforms are often pre-processed and simplified to overcome imaging challenges. Real data issues include aliased station spacing, inadequate array aperture, inaccurate velocity model, low signal-to-noise ratio, large noise bursts and varying waveform polarity. We compare the performance of backprojection with four previously used data pre-processing methods: raw waveform, envelope, short-term averaging/long-term averaging and kurtosis. Our primary goal is to detect and locate events smaller than noise by stacking prior to detection to improve the signal-to-noise ratio. The objective is to identify an optimized strategy for automated imaging that is robust in the presence of real-data issues, has the lowest signal-to-noise thresholds for detection and for location, has the best spatial resolution of the source images, preserves magnitude, and considers computational cost. Imaging method performance is assessed using a real aftershock data set recorded by the dense AIDA array following the 2011 Virginia earthquake. Our comparisons show that raw-waveform backprojection provides the best spatial resolution, preserves magnitude and boosts signal to detect events smaller than noise, but is most sensitive to velocity error, polarity error and noise bursts. On the other hand, the other methods avoid polarity error and reduce sensitivity to velocity error, but sacrifice spatial resolution and cannot effectively reduce noise by stacking. Of these, only kurtosis is insensitive to large noise bursts while being as efficient as the raw-waveform method to lower the detection threshold; however, it does not preserve the magnitude information. For automatic detection and location of events in a large data set, we therefore recommend backprojecting kurtosis waveforms, followed by a second pass on the detected events using noise-filtered raw waveforms to achieve the best of all criteria.

58 GEOSCIENCES↗

Quantitative comparison of opacities calculated using the R -matrix and distorted-wave methods: Fe xvii

ABSTRACT We present here a detailed calculation of opacities for Fe xvii at the physical conditions corresponding to the base of the Solar convection zone. Many ingredients are involved in the calculation of opacities. We review the impact of each ingredient on the final monochromatic and mean opacities (Rosseland and Planck). The necessary atomic data were calculated with the R-matrix and the distorted-wave (DW) methods. We study the effect of broadening, of resolution, of the extent of configuration sets and of configuration interaction to understand the differences between several theoretical predictions as well as the existing large disagreement with measurements. New Dirac R-matrix calculations including all configurations up to the n = 4, 5, and 6 complexes have been performed as well as corresponding Breit–Pauli DW calculations. The DW calculations have been extended to include autoionizing initial levels. A quantitative contrast is made between comparable DW and R-matrix models. We have reached self-convergence with n = 6 R-matrix and DW calculations. Populations in autoionizing initial levels contribute significantly to the opacities and should not be neglected. The R-matrix and DW results are consistent under the similar treatment of resonance broadening. The comparison with the experiment shows a persistent difference in the continuum while the filling of the windows shows some improvement. This study defines our path to the next generation of opacities and opacity tables for stellar modelling.

Delahaye, F.↗

Convergence of halo statistics: code comparison between rockstar and compaso using scale-free simulations

ABSTRACT In this study, we perform a halo-finder code comparison between rockstar and compaso. Based on our previous analysis aiming at quantifying resolution of N-body simulations by exploiting large (up to N = 40963) simulations of scale-free cosmologies run using abacus, we focus on convergence of the halo mass function, two-point correlation function, and mean radial pairwise velocities of halo centres selected with the aforementioned two algorithms. We establish convergence, for both rockstar and compaso, of mass functions at the 1 per cent precision level and of the mean pairwise velocities (and also two-point correlation function) at the 2 per cent level. At small scales and masses, we find that rockstar exhibits greater self-similarity. We also highlight the role played by the merger-tree post-processing of compaso haloes on their convergence. Finally, we give resolution limits expressed as a minimum particle number per halo in a form that can be directly extrapolated to Lambda cold dark matter.

Astronomy & Astrophysics↗

A comparison of explosion energies for simulated and observed core-collapse supernovae

ABSTRACT There are now 20 multidimensional core-collapse supernova (CCSN) simulations that explode. However, these simulations have explosion energies that are a few times 1050 erg, not 1051 erg. In this manuscript, we compare the inferred explosion energies of these simulations and observations of 40 SN IIP. Assuming a lognormal distribution, the mean explosion energy for these observations is $\mu _{\rm obs} = -0.23^{+0.08}_{-0.12}$ ($\log _{10}(E/10^{51}\, {\rm erg})$) and the width is $\sigma _{\rm obs} = 0.52^{+0.09}_{-0.08}$. Only three CCSN codes have sufficient simulations to compare with observations: CHIMERA, CoCoNuT-FMT, and FORNAX. Currently, FORNAX has the largest sample of simulations. The two-dimensional FORNAX simulations show a correlation between explosion energy and progenitor mass, ranging from linear to quadratic, Esim ∝ M1 − 2; this correlation is consistent with inferences from observations. In addition, we infer the ratio of the observed-to-simulated explosion energies, Δ = log10(Eobs/Esim). For the CHIMERA set, Δ = 0.25 ± 0.07; for CoCoNuT-FMT, Δ = 0.49 ± 0.07; for FORNAX2D, Δ = 0.62 ± 0.06, and for FORNAX3D, Δ = 0.85 ± 0.07. On average, the simulations are less energetic than inferred energies from observations (Δ ≈ 0.6), but we also note that the variation among the simulations [max(Δ) − min(Δ) ≈ 0.6] is as large as this average offset. This suggests that further improvements to the simulations could resolve the discrepancy. Furthermore, both the simulations and observations are heavily biased. In this preliminary comparison, we model these biases, but to more reliably compare the explosion energies, we recommend strategies to unbias both the simulations and observations.

79 ASTRONOMY AND ASTROPHYSICS↗

A high-fidelity realization of the Euclid code comparison N-body simulation with Abacus

Abstract We present a high-fidelity realization of the cosmological N-body simulation from the Schneider et al. code comparison project. The simulation was performed with our AbacusN-body code, which offers high-force accuracy, high performance, and minimal particle integration errors. The simulation consists of 20483 particles in a $500\ h^{-1}\, \mathrm{Mpc}$ box for a particle mass of $1.2\times 10^9\ h^{-1}\, \mathrm{M}_\odot$ with $10\ h^{-1}\, \mathrm{kpc}$ spline softening. Abacus executed 1052 global time-steps to z = 0 in 107 h on one dual-Xeon, dual-GPU node, for a mean rate of 23 million particles per second per step. We find Abacus is in good agreement with Ramses and Pkdgrav3 and less so with Gadget3. We validate our choice of time-step by halving the step size and find sub-percent differences in the power spectrum and 2PCF at nearly all measured scales, with ${\lt }0.3{{\ \rm per\ cent}}$ errors at $k\lt 10\ \mathrm{Mpc}^{-1}\, h$. On large scales, Abacus reproduces linear theory better than 0.01 per cent. Simulation snapshots are available at http://nbody.rc.fas.harvard.edu/public/S2016.

79 ASTRONOMY AND ASTROPHYSICS↗

The ModelSEED Biochemistry Database for the integration of metabolic annotations and the reconstruction, comparison and analysis of metabolic models for plants, fungi and microbes

Abstract For over 10 years, ModelSEED has been a primary resource for the construction of draft genome-scale metabolic models based on annotated microbial or plant genomes. Now being released, the biochemistry database serves as the foundation of biochemical data underlying ModelSEED and KBase. The biochemistry database embodies several properties that, taken together, distinguish it from other published biochemistry resources by: (i) including compartmentalization, transport reactions, charged molecules and proton balancing on reactions; (ii) being extensible by the user community, with all data stored in GitHub; and (iii) design as a biochemical ‘Rosetta Stone’ to facilitate comparison and integration of annotations from many different tools and databases. The database was constructed by combining chemical data from many resources, applying standard transformations, identifying redundancies and computing thermodynamic properties. The ModelSEED biochemistry is continually tested using flux balance analysis to ensure the biochemical network is modeling-ready and capable of simulating diverse phenotypes. Ontologies can be designed to aid in comparing and reconciling metabolic reconstructions that differ in how they represent various metabolic pathways. ModelSEED now includes 33,978 compounds and 36,645 reactions, available as a set of extensible files on GitHub, and available to search at https://modelseed.org and KBase.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of Monoenergetic Photon Organ Dose Rate Coefficients for the Female Stylized and Voxel Phantoms Submerged in Air

Dose rate coefficients computed using the International Commission on Radiological Protection (ICRP) reference adult female voxel phantom were compared with values computed using the Oak Ridge National Laboratory (ORNL) adult female stylized phantom in an air submersion exposure geometry. This is a continuation of previous work comparing monoenergetic organ dose rate coefficients for the male adult phantoms. With both the male and female data computed, effective dose rate as defined by ICRP Publication 103 was compared for both phantoms. Organ dose rate coefficients for the female phantom and ratios of organ dose rates for the voxel and stylized phantoms are provided in the energy range from 30 to 5 MeV. Analysis of the contribution of the organs to effective dose is also provided. Lastly, comparison of effective dose rates between the voxel and stylized phantoms was within 8% at 100 keV and is <5% between 200 and 5000 keV.

61 RADIATION PROTECTION AND DOSIMETRY↗

Comparison of sleep parameters from wrist-worn ActiGraph and Actiwatch devices

Abstract Sleep and physical activity, two important health behaviors, are often studied independently using different accelerometer types and body locations. Understanding whether accelerometers designed for monitoring each behavior can provide similar sleep parameter estimates may help determine whether one device can be used to measure both behaviors. Three hundred and thirty one adults (70.7 ± 13.7 years) from the Baltimore Longitudinal Study of Aging wore the ActiGraph GT9X Link and the Actiwatch 2 simultaneously on the non-dominant wrist for 7.0 ± 1.6 nights. Total sleep time (TST), wake after sleep onset (WASO), sleep efficiency, number of wake bouts, mean wake bout length, and sleep fragmentation index (SFI) were extracted from ActiGraph using the Cole–Kripke algorithm and from Actiwatch using the software default algorithm. These parameters were compared using paired t-tests, Bland–Altman plots, and Deming regression models. Stratified analyses were performed by age, sex, and body mass index (BMI). Compared to the Actiwatch, the ActiGraph estimated comparable TST and sleep efficiency, but fewer wake bouts, longer WASO, longer wake bout length, and higher SFI (all p < .001). Both devices estimated similar 1-min and 1% differences between participants for TST and SFI (β = 0.99, 95% CI: 0.95, 1.03, and 0.91, 1.13, respectively), but not for other parameters. These differences varied by age, sex, and/or BMI. The ActiGraph and the Actiwatch provide comparable absolute and relative estimates of TST, but not other parameters. The discrepancies could result from device differences in movement collection and/or sleep scoring algorithms. Further comparison and calibration is required before these devices can be used interchangeably.

Liu, Fangyu (ORCID:0000000315541478)↗

New Approach Methodology for Assessing Inhalation Risks of a Contact Respiratory Cytotoxicant: Computational Fluid Dynamics-Based Aerosol Dosimetry Modeling for Cross-Species and In Vitro Comparisons

Regulatory agencies are considering alternative approaches to assessing inhalation toxicity that utilizes in vitro studies with human cells and in silico modeling in lieu of additional animal studies. In support of this goal, computational fluid-particle dynamics models were developed to estimate site-specific deposition of inhaled aerosols containing the fungicide, chlorothalonil, in the rat and human for comparisons to prior rat inhalation studies and new human in vitro studies. Under bioassay conditions, the deposition was predicted to be greatest at the front of the rat nose followed by the anterior transitional epithelium and larynx corresponding to regions most sensitive to local contact irritation and cytotoxicity. For humans, simulations of aerosol deposition covering potential occupational or residential exposures (1–50 µm diameter) were conducted using nasal and oral breathing. Aerosols in the 1–5 µm range readily penetrated the deep region of the human lung following both oral and nasal breathing. Under actual use conditions (aerosol formulations >10 µm), the majority of deposited doses were in the upper conducting airways. Beyond the nose or mouth, the greatest deposition in the pharynx, larynx, trachea, and bronchi was predicted for aerosols in the 10–20 µm size range. Only small amounts of aerosols >20 µm penetrated past the pharyngeal region. Using the ICRP clearance model, local retained tissue dose metrics including maximal concentrations and areas under the curve were calculated for each airway region following repeated occupational exposures. These results are directly comparable with benchmark doses from in vitro toxicity studies in human cells leading to estimated human equivalent concentrations that reduce the reliance on animals for risk assessments.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Refine your search to explore more results.