Search NASA⌕ Search

SEARCH · Search NASA

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

On the origin of high ionic conductivity in Na-doped SrSiO 3

Understanding the local structure and ion dynamics is at the heart of ion conductor research. This paper reports on high-resolution solid-state 29 Si, 23 Na, and 17 O NMR investigation of the structure, chemical composition, and ion dynamics of a newly discovered fast ion conductor, Na-doped SrSiO 3 , which exhibited a much higher ionic conductivity than most of current oxide ion conductors. Quantitative analyses reveal that with a small dose (<10 mol%) of Na, the doped Na integrates into the SrSiO 3 structure to form Na x Sr 1-x SiO 3-0.5x , and with >10 mol% Na doping, phase separation occurs, leading to the formation of an amorphous phase β-Na 2 Si 2 O 5 and a crystalline Sr-rich phase. Variable-temperature 23Na and 17O magic-angle-spinning NMR up to 618 °C have shown significant changes in Na ion dynamics at high temperatures but little oxide ion motion, suggesting that Na ions are responsible for the observed high ionic conductivity. In addition, β-Na 2 Si 2 O 5 starts to crystallize at temperatures higher than 480 °C with prolonged heating, resulting in reduction in Na+ motion, and thus degradation of ionic conductivity. This study has contributed critical evidence to the understanding of ionic conduction in Na-doped SrSiO 3 and demonstrated that multinuclear high-resolution and high-temperature solid-state NMR is a uniquely useful tool for investigating ion conductors at their operating conditions.

36 MATERIALS SCIENCE↗

Large reduction of thermal conductivity leading to enhanced thermoelectric performance in p-type Mg 3 Bi 2 –YbMg 2 Bi 2 solid solutions

Intensifying the phonon scattering via point defect engineering has been demonstrated to be particularly effective in minimizing the lattice thermal conductivity for enhancing thermoelectric performance. In this work, significant phonon scattering has been realized by alloying YbMg 2 Bi 2 with Mg 3 Bi 2 . The substantial mass difference between the host atom Yb and the alloying atom Mg leads to an intense phonon scattering effect that significantly reduces the lattice thermal conductivity. The room-temperature lattice thermal conductivity decreases from ~2.7 W m -1 K -1 for YbMg 2 Bi 1.96 to ~0.8 W m -1 K -1 for Yb 0.7 Mg 0.3 Mg 2 Bi 1.96 , a reduction of ~70%. Benefiting from the greatly reduced thermal conductivity, the average ZT has been effectively improved from ~0.46 for YbMg 2 Bi 1.96 to ~0.61 for Yb 0.8 Mg 0.2 Mg 2 Bi 1.96 , an enhancement of ~33%. In addition, the predicted maximum heat-to-electricity conversion efficiency can be increased from ~7% for YbMg 2 Bi 1.96 to ~10% for Yb 0.8 Mg 0.2 Mg 2 Bi 1.96 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and thermal properties of ultralow thermal conductivity Ba 3 Cu 2 Sn 3 Se 10

The thermal properties of Ba 3 Cu 2 Sn 3 Se 10 were investigated by measurement of the thermal conductivity and heat capacity. The chemical bonding in this diamagnetic material was investigated using structural data from Rietveld refinement and calculated electron localization. This quaternary chalcogenide is monoclinic (P2 1 /c), has a large unit cell with 72 atoms in the primitive cell, and a high local coordination environment. Additionally, the Debye temperature (162 K) and average speed of sound (1666 m s -1 ) are relatively low with a very small electronic contribution to the heat capacity. Ultralow thermal conductivity (0.46 W m -1 K -1 at room temperature) is attributed to the relatively weak chemical bonding and intrinsic anharmonicity, in addition to a large unit cell. This work is part of the continuing effort to explore quaternary chalcogenides with intrinsically low thermal conductivity and identify the features that result in a low thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and exceptional operational durability of polyaniline-inspired conductive ladder polymers

Ladder-type structures can impart exceptional stability to polymeric electronic materials. This article introduces a new class of conductive polymers featuring a fully ladder-type backbone. A judicious molecular design strategy enables the synthesis of a low-defect ladder polymer, which can be efficiently oxidized and acid-doped to achieve its conductive state. The structural elucidation of this polymer and the characterization of its open-shell nature are facilitated with the assistance of studies on small molecular models. An autonomous robotic system is used to optimize the conductivity of the polymer thin film, achieving over 7 mS cm −1 . Impressively, this polymer demonstrates unparalleled stability in strong acid and under harsh UV-irradiation, significantly surpassing commercial benchmarks like PEDOT:PSS and polyaniline. Moreover, it displays superior durability across numerous redox cycles as the active material in an electrochromic device and as the pseudocapacitive material in a supercapacitor device. This work provides structural design guidance for durable conductive polymers for long-term device operation.

36 MATERIALS SCIENCE↗

Ultrathin electron and proton-conducting membranes for nanoscale integrated artificial photosystems

Reducing the thickness of separation membranes without compromising their selectivity and robustness is the most effective way of maximizing the areal conductivity. This is especially important for the integration of visible light-driven water oxidation and carbon dioxide (or proton) reduction into a complete artificial photosystem on the shortest possible length scale – the nanoscale – because of the efficiency advantages over macroscale photosystems. In addition to their excellent separation property, ultrathin membranes of 10 nm thickness or less need to exhibit sufficient electrical and proton conductivity in order for the photocatalytic rates to keep up with the photon flux at maximum solar intensity. Furher, two materials, graphene and amorphous silica with embedded molecular wires, have emerged as promising ultrathin membranes for the development of nanoscale integrated solar-fuel systems. Moreover, electrically conducting metal–organic or covalent–organic frameworks can be used to fabricate high surface area-supports that enable the use of molecular catalysts and/or light absorbers at an adequate areal density for nanoscale integration with graphene membranes. Following an overview of the electron and proton conductivity of these ultrathin materials and recent examples of photoelectrocatalytic applications that take advantage of some but not all the properties that constitute a complete functional membrane, the status and future opportunities for complete nanoscale integrated photosystems featuring an ultrathin membrane are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Ion concentration polarization causes a nearly pore-length-independent conductance of nanopores

There has been a great amount of interest in nanopores as the basis for sensors and templates for preparation of biomimetic channels as well as model systems to understand transport properties at the nanoscale. The presence of surface charges on the pore walls has been shown to induce ion selectivity as well as enhance ionic conductance compared to uncharged pores. Here, using three-dimensional continuum modeling, we examine the role of the length of charged nanopores as well as applied voltage for controlling ion selectivity and ionic conductance of single nanopores and small nanopore arrays. First, we present conditions where the ion current and ion selectivity of nanopores with homogeneous surface charges remain unchanged, even if the pore length decreases by a factor of 6. This length-independent conductance is explained through the effect of ion concentration polarization (ICP), which modifies local ionic concentrations, not only at the pore entrances but also in the pore in a voltage-dependent manner. We describe how voltage controls the ion selectivity of nanopores with different lengths and present the conditions when charged nanopores conduct less current than uncharged pores of the same geometrical characteristics. The manuscript provides different measures of the extent of the depletion zone induced by ICP in single pores and nanopore arrays, including systems with ionic diodes. In conclusion, the modeling shown here will help design selective nanopores for a variety of applications where single nanopores and nanopore arrays are used.

Cain, DaVante↗

Thermal Conductivity of Graphene Coated Copper Under Uniaxial Tensile Mechanical Strain

Graphene continues to demonstrate promise as a highly effective barrier coating, even at only one atom thick. The thermal properties of this coating are also promising to allow diffusion of heat across the surface, as the isolated graphene is an intrinsically good thermal conductor, yet this and its behavior under mechanical deformation has been less extensively studied. This report demonstrates that the in-plane thermal conductivity and interfacial thermal conductance of graphene coatings on copper are affected by mechanical strain. By inducing a strain in the copper substrate, the Raman-active 2D peak exhibits a change in position as well as a change in laser power dependence as the copper substrate is uniaxially elongated to a maximum of 0.5%. Non-linear trends in thermal conductivity are observed with tensile strain in samples with differing strain transfer rates from the substrate, indicating the close correlation between intrinsic thermal conduction and interfacial properties in atomically thin coatings transferred onto metals.

36 MATERIALS SCIENCE↗

A single-ion-conducting polymer and high-entropy Li-garnet composite electrolyte with simultaneous enhancement in ion transport and mechanical properties

Enabling the lithium metal anode has been the holy grail for improving the energy density for the next generation advanced batteries. Developing electrolytes that will suppress Li dendrite growth and provide sufficient ionic conductivity remains a major challenge in this field. In this study, we develop a polymer–ceramic composite electrolyte for lithium metal batteries. The polymer matrix is a vinyl ethylene carbonate (VEC) based single-ion-conducting polymer electrolyte. The ceramic filler is a Li 7 La 3 Zr 0.5 Nb 0.5 Ta 0.5 Hf 0.5 O 12 high-entropy Li-garnet (HE Li-garnet) ceramic, which is less prone to surface Li 2 CO 3 formation compared to Al-doped Li garnets. The addition of HE Li-garnet leads to a 7-fold increase in the ionic conductivity (8.6 × 10 −5 S cm −1 at 30 °C) compared to the pure polymer, while maintaining a high Li + transference of 0.73. Proton nuclear magnetic resonance and thermogravimetric analysis results suggest that the addition of HE Li-garnet results in a lower degree of polymerization of VEC, leaving more unpolymerized VEC monomers in the matrix, serving as the governing mechanism for conductivity enhancement. The favorable interactions between HE Li-garnet particles and the polymer matrix lead to a stable and well-mixed composite with 2-fold enhancement of storage modulus at 40 °C. The simultaneous ion transport and mechanical property enhancement significantly improves the composite electrolyte's dendrite resistance and cycle life in Li symmetric cells. This work highlights the positive role HE Li-garnet can play in improving polymer electrolytes to enable lithium metal anodes.

Ock, Ji-young [Oak Ridge National Laboratory (ORNL↗

Effect of mesh bias on the properties of the lateral conductivity of intrinsic microcrystalline silicon films deposited by low-frequency inductively coupled plasma

A meshgrid is installed to study the effect of mesh bias on the lateral conductivity properties of intrinsic microcrystalline silicon films deposited by low frequency inductively coupled plasma. When a mesh bias is increased from 0 to -15 V, the dark conductivity remarkably decreases by three orders of magnitude, whereas the ratio of the photo and dark conductivity improves by one order. On contrary, the applied substrate bias has only a marginal effect on the lateral conductivity. It is revealed from the measured electron energy distribution functions that the sheath layer induced ion bombardment is responsible for the drastic change.

36 MATERIALS SCIENCE↗

Conductance of ferro- and antiferro-magnetic single-atom contacts: A first-principles study

We present a first-principles study on the spin dependent conductance of five single-atom magnetic junctions consisting of a magnetic tip and an adatom adsorbed on a magnetic surface, i.e., the Co-Co/Co(001) and Ni-X/Ni(001) (X = Fe, Co, Ni, Cu) junctions. When their spin configuration changes from ferromagnetism to anti-ferromagnetism, the spin-up conductance increases while the spin-down one decreases. For the junctions with a magnetic adatom, there is nearly no spin valve effect as the decreased spin-down conductance counteracts the increased spin-up one. For the junction with a nonmagnetic adatom (Ni-Cu/Ni(001)), a spin valve effect is obtained with a variation of 22% in the total conductance. In addition, the change in spin configuration enhances the spin filter effect for the Ni-Fe/Ni(001) junction but suppresses it for the other junctions.

36 MATERIALS SCIENCE↗

Conductance modulation in topological insulator Bi{sub 2}Se{sub 3} thin films with ionic liquid gating

A Bi{sub 2}Se{sub 3} topological insulator field effect transistor is investigated by using ionic liquid as an electric double layer gating material, leading to a conductance modulation of 365% at room temperature. We discuss the role of charged impurities on the transport properties. The conductance modulation with gate bias is due to a change in the carrier concentration, whereas the temperature dependent conductance change is originated from a change in mobility. Large conductance modulation at room temperature along with the transparent optical properties makes topological insulators as an interesting (opto)electronic material.

36 MATERIALS SCIENCE↗

The role of band alignment in p-type conductivity of Na-doped ZnMgO: Polar versus non-polar

We investigate the electrical properties of polar and non-polar ZnMgO:Na films that have been fabricated on c-plane and r-plane sapphire substrates using intervened ZnO layers (10–30 nm thick) by pulsed laser deposition. Hall-effect measurements indicate that the a-plane ZnMgO:Na film exhibits p-type conductivity with a carrier concentration of about 3.5 × 10{sup 16} cm{sup −3}, while the polar film shows a compensatory conductivity. Meanwhile, the dependence of the band alignment on the orientation of the ZnMgO/ZnO heterojunctions has been investigated using photoelectron spectroscopy. The heterojunctions form in the type-I straddling alignment with valence band offsets of 0.07 (0.02) eV for the (non-)polar heterojunction. The difference in valence band offsets is primarily attributed to the spontaneous polarization effect. We propose that the smaller valence band offsets and larger conduction band offsets would reduce the Na{sub Zn} acceptor level and enhance the relative intrinsic donor levels. Such effects consequently lead to p-type conductivity in non-polar ZnMgO:Na films. The band alignment of non-polar ZnMgO/ZnO can be used to facilitate p-type doping with a shallower acceptor state in the ZnO-like alloy.

36 MATERIALS SCIENCE↗

Microstructure and conductance-slope of InAs/GaSb tunnel diodes

InAs/GaSb and similar materials systems have generated great interest as a heterojunction for tunnel field effect transistors (TFETs) due to favorable band alignment. However, little is currently understood about how such TFETs are affected by materials defects and nonidealities. We present measurements of the conductance slope for various InAs/GaSb heterojunctions via two-terminal electrical measurements, which removes three-terminal parasitics and enables direct study on the effect of microstructure on tunnelling. Using this, we can predict how subthreshold swings in TFETs can depend on microstructure. We also demonstrate growth and electrical characterization for structures grown by metalorganic chemical vapor deposition (MOCVD)—a generally more scalable process compared with molecular beam epitaxy (MBE). We determine that misfit dislocations and point defects near the interface can lead to energy states in the band-gap and local band bending that result in trap-assisted leakage routes and nonuniform band alignment across the junction area that lower the steepness of the conductance slope. Despite the small lattice mismatch, misfit dislocations still form in InAs on GaSb due to relaxation as a result of large strain from intermixed compositions. This can be circumvented by growing GaSb on InAs, straining the GaSb underlayer, or lowering the InAs growth temperature in the region of the interface. The conductance slope can also be improved by annealing the samples at higher temperatures, which we believe acts to annihilate point defects and average out major fluctuations in band alignment across the interface. Using a combination of these techniques, we can greatly improve the steepness of the conductance slope which could result in steeper subthreshold swings in TFETs in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of the current discretization in deep reset states of an Al{sub 2}O{sub 3}/Cu-based conductive-bridging memory, and impact on state level and variability

In this paper, we develop a Quantum-Point-Contact (QPC) model describing the state conduction in a W/Al{sub 2}O{sub 3}/TiW/Cu Conductive-Bridging Memory cell (CBRAM). The model allows describing both the voltage- and the temperature-dependence of the conduction. For deep current levels, a resistance component is added in series to the point-contact constriction to account for electron scattering in the residual filament. The fitting of single-particle perturbation also allowed to estimate the number and effective size of the conduction-controlling particles in the QPC constriction. The results clearly point to smaller particles for CBRAM (Cu particles) as compared to oxide-based resistive RAM involving oxygen-vacancy defects, which is discussed as a possible origin of deeper reset level obtained in CBRAM. We also evidence a beneficial impact of this smaller particle size on lower Random-Telegraph-Noise amplitude measured on CBRAM devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fourier analysis of conductive heat transfer for glazed roofing materials

For low-rise buildings, roof is the most exposed surface to solar radiation. The main mode of heat transfer from outdoor via the roof is conduction. The rate of heat transfer and the thermal impact is dependent on the thermophysical properties of roofing materials. Thus, it is important to analyze the heat distribution for the various types of roofing materials. The objectives of this paper are to obtain the Fourier series for the conductive heat transfer for two types of glazed roofing materials, namely polycarbonate and polyfilled, and also to determine the relationship between the ambient temperature and the conductive heat transfer for these materials. Ambient and surface temperature data were collected from an empirical field investigation in the campus of Universiti Teknologi MARA Shah Alam. The roofing materials were installed on free-standing structures in natural ventilation. Since the temperature data are generally periodic, Fourier series and numerical harmonic analysis are applied. Based on the 24-point harmonic analysis, the eleventh order harmonics is found to generate an adequate Fourier series expansion for both glazed roofing materials. In addition, there exists a linear relationship between the ambient temperature and the conductive heat transfer for both glazed roofing materials. Based on the gradient of the graphs, lower heat transfer is indicated through polyfilled. Thus polyfilled would have a lower thermal impact compared to polycarbonate.

42 ENGINEERING↗

Luminescence quenching of conductive Si nanocrystals via “Linkage emission”: Hopping-like propagation of infrared-excited Auger electrons

Phosphorus (P) is an n-type dopant for conductive silicon nanocrystals (Si-nc's), the electrical activation of which may be monitored through a non-radiative Auger recombination process that quenches the Si-nc luminescence. We investigated this quenching mechanism through electrical measurements of Si-nc's. Infrared-excited Auger electron emission as the non-radiative process was directly probed and the dynamics of the process are determined from a frequency response analysis. To explain the dynamics, we propose a model in which Auger electrons with a low kinetic energy establish a local inter-nanocrystal conductance and the repetition of this local conductance results in a constant photocurrent (“linkage emission”). This emission becomes significant by electron filling in the Si-nc's owing to the electrical activation of P, which is consistent with observed luminescence quenching behavior. We found that the IR photo-excited emission is distinct from the thermally induced hopping conduction and show that confined, rather than trapped, charges are the source of the Auger electrons. Thus, the process consumes both confined charges and the recombination energy for Auger emission, which explains the luminescence quenching mechanism of Si-nc:P.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resistive switching and conductance quantization in Ag/SiO{sub 2}/indium tin oxide resistive memories

The Ag/SiO{sub 2}/indium tin oxide (ITO) devices exhibit bipolar resistive switching with a large memory window of ∼10{sup 2}, satisfactory endurance of >500 cycles, good retention property of >2000 s, and fast operation speed of <100 ns, thus being a type of promising resistive memory. Under slow voltage sweep measurements, conductance plateaus with a conductance value of integer or half-integer multiples of single atomic point contact have been observed, which agree well with the physical phenomenon of conductance quantization. More importantly, the Ag/SiO{sub 2}/ITO devices exhibit more distinct quantized conductance plateaus under pulse measurements, thereby showing the potential for realizing ultra-high storage density.

36 MATERIALS SCIENCE↗

Metallic to hopping conduction transition in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching device

In this Letter, a comprehensive analysis of how the metallic behavior transition to hopping was presented by studying the transport mechanisms of low resistance states (LRS) in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching devices at very low temperatures. Three types of conduction behaviors were reported through temperature-dependent measurements ranging from 5 K to 250 K. Memory cells at low LRS show metallic behavior due to the formation of metallic filament. The temperature dependence of resistance at medium LRS exhibits an interesting phenomenon that a positive temperature coefficient transfers into a negative one at temperature of 20 K. Detailed analysis reveals that this phenomenon is caused by the coexistence of extended and localized states, with metallic conduction at higher temperatures and variable-range hopping at lower temperatures. Carrier transport at high LRS is dominated by electrons hopping conduction with nearest-neighboring hopping conduction changing into variable-range hopping as temperature decreases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refine your search to explore more results.