Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

On-the-fly scans for X-ray ptychography

With the increasing importance of nanotechnology, the need for reliable real-time imaging of mesoscopic objects with nanometer resolution is rising. For X-ray ptychography, a scanning microscopy technique that provides nanometric resolution on extended fields of view, and the settling time of the scanning system is one of the bottlenecks for fast imaging. Here, we demonstrate that ptychographic on-the-fly scans, i.e., collecting diffraction patterns while the sample is scanned with constant velocity, can be modelled as a state mixture of the probing radiation and allow for reliable image recovery. Characteristics of the probe modes are discussed for various scan parameters, and the application to significantly reducing the scanning time is considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-Diffraction-Limited Operation of Step-Index Large-Mode-Area Fiber Lasers Via Gain Filtering

We present, for the first time to our knowledge, an explicit experimental comparison of beam quality in conventional and confined-gain multimode fiber lasers. In the conventional fiber laser, beam quality degrades with increasing output power. In the confined-gain fiber laser, the beam quality is good and does not degrade with output power. Gain filtering of higher-order modes in 28 μm diameter core fiber lasers is demonstrated with a beam quality of M^2 = 1.3 at all pumping levels. Theoretical modeling is shown to agree well with experimentally observed trends.

Marciante, J R↗

Excess Heat Capacity in Mo/Au Transition Edge Sensor Bolometric Detectors

Excessheat capacity in a bolometric detector has the consequence of increasing or leading to multiple device time con-stants.The Mo/Au bilayer transition edge sensor (TES) bolo-metric detectors intended for the high resolution mid-infrared spectrometer (HIRMES) have two response time, one of which is a few times longer than that estimated from materials used in the design. The relative contribution of this settling time to the overall time response of the detectors is roughly proportional with the pixel area, which ranges between ~0.3 and 2.6 mm2.Use of laser ablation to remove sections of the silicon membranes comprising the pixels results in a detector response with a smaller contribution from the secondary time constant.Additional information about the nature of this excess heat capacity is gleaned from glancing in-cidence x-ray diffraction, which reveals the presence of molyb-denum silicides near the silicon surface from the bi-layer deposi-tion.Quantitative analysis of the concentration of excess molyb-denum, estimated with secondary ion mass spectroscopy, is com-mensurate to the additional heat capacity needed to explain the anomalous time response of the detectors.

HIRMES↗

Material and Interface Engineering Strategies to Mitigate Decoherence in Superconducting Qubits

While significant strides have been made to increase the coherence time of superconducting qubits, further advancements are essential for realizing scalable quantum computing. Decoherence is often a result of loss and noise stemming from two-level systems and excess quasiparticles, arising due to material defects, fabrication processes, and ambient exposure, particularly at surfaces and interfaces. Our recent efforts to mitigate these decoherence mechanisms have employed a variety of strategies, including low-loss surface encapsulation materials, advanced substrate preparation techniques, modifications to metal film growth, and the development of novel fabrication processes. The structural and chemical properties of materials, surfaces, and interfaces are studied using scanning probe microscopy, electron microscopy, photoelectron spectroscopy, mass spectrometry, and X-ray diffraction, which is correlated to device performance metrics, including superconducting resonator internal quality factor and qubit T1 time. This information is used to identify and understand material sources of loss and their origins in the device fabrication process. Through multi-institution efforts within SQMS we have identified the loss mechanism of interstitial hydrogen in niobium-based devices and shown how standard fabrication processes introduce these hydrides, developing strategies to mitigate their formation.1 Furthermore, we have characterized the metal-substrate interface, including the loss of niobium-silicides formed at that interface, and developed silicon surface treatments that reduce atomic scale roughness and oxygen content at the metal-substrate and Josephson junction interfaces.2-4 By developing the connection between materials properties and the overall performance of superconducting quantum circuitry, we can develop fabrication strategies to mitigate material losses, thus supporting the ongoing efforts to enhance coherence time in superconducting quantum devices. 1. Torres-Castanedo, C. G.*, Goronzy, D. P.*, et al., Adv. Funct. Mater., 2401365 (2024) 2. Lu, X., et al., Phys. Rev. Materials 6, 064402 (2022) 3. Berti, G., Appl. Phys. Lett. 122, 192605 (2023) 4. Kopas, C. J., Goronzy, D. P., et al., arXiv:2408.02863 (2024)

Goronzy, Dominic P.↗

Atomic-Scale Structure and Stress Release Mechanism in Core–Shell Nanoparticles

According to the article, core–shell nanoparticles find applications in catalysts, sensors, and theranostics. The full internal 3D atomic structure, however, cannot be resolved by current imaging and diffraction techniques. We analyzed the atomic positions and stress-release mechanism in a cubic Au–Pd core–shell nanoparticle in approximately 1000 times higher resolution than current experimental techniques using large-scale molecular dynamics simulation to overcome these limitations. The core–shell nanocube of 73 nm size was modeled similarly to solution synthesis by random epitaxial deposition of a 4 nm thick shell of Pd atoms onto a Au core of 65 nm side length using reliable interatomic potentials. The internal structure reveals specific deformations and stress relaxation mechanisms that are caused by the +4.8% lattice mismatch of gold relative to palladium and differential confinement of extended particle facets, edges, and corners by one, two, or three Au–Pd interfaces, respectively. The three-dimensional lattice strain causes long-range, arc-like bending of atomic rows along the faces and edges of the particle, especially near the Au–Pd interface, a bulging deformation of the Pd shell, and stacking faults in the Pd shell at the corners of the particle. The strain pattern and mechanism of stress release were further characterized by profiles of the atomic layer spacing in the principal crystallographic directions. Accordingly, strain in the Pd shell is several times larger in the extended facets than near the edges and corners of the nanoparticle, which likely affects adsorption, optical, and electrochemical properties. The findings are consistent with available experimental data, including 3D reconstructions of the same cubic nanoparticle by coherent diffractive imaging (CDI) and may be verified by more powerful experimental techniques in the future. The stress release mechanisms are representative for cubic core–shell nanoparticles with fcc structure and can be explored for different shapes by the same methods.

Chemistry↗

Plutonium Particles in Samples Extracted from Hanford Tank Waste TX-118 and SY-102 (Interim Report)

This is an interim report on the characterization of plutonium particles from Hanford wastes. Plutonium-bearing particles were located in Hanford Waste Tank solids, SY-102 and TX-118. The particles in SY-102 were small, typically < 5 to 10 µm in length, and were crystalline plutonium oxide with an association of other elements at minor levels, including bismuth, phosphate, and iron based on Sanning Electron Microscopy (SEM) observations. Plutonium particles from SY-102 were extracted from the surface mount using the SEM-Focused Ion Beam (FIB) and prepared for Scanning Transmission Electron Microscopy (STEM). This was the first time that this type of analysis of Hanford tank waste solids has been attempted. The STEM analysis indicated a complex co-precipitation of plutonium oxide with bismuth and phosphate. Diffraction and imaging only partially matched with a PuO 2 phase. Pockets of phosphate and bismuth reside within the plutonium oxide suggesting that these phases formed at the same time. The SEM analysis indicated that the plutonium particles from TX-118 were a mixed bismuth-phosphate phase and plutonium oxide. These particles will be examined with SEM-FIB at a later time and then will undergo more detailed examination in the STEM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Calcium sulfoaluminate (Ye'elimite) hydration in the presence of gypsum, calcite, and vaterite

Six calcium sulfoaluminate-based cementitious systems composed of calcium sulfoaluminate, calcite, vaterite, and gypsum were cured as pastes and mortars for 1, 7, 28 and 84 days. Pastes were analyzed with X-ray diffraction, thermogravimetric and differential thermal analyses. Mortars were tested for compressive strength, dimensional stability and setting time. Furthermore, pastes with a water/cementitious material mass ratio of 0.80 were tested for heat evolution during the first 48 h by means of isothermal conduction calorimetry. It has been found that: (1) both calcite and vaterite reacted with monosulfoaluminate to give monocarboaluminate and ettringite, with vaterite being more reactive; (2) gypsum lowered the reactivity of both carbonates; (3) expansion was reduced by calcite and vaterite, irrespective of the presence of gypsum; and (4) both carbonates increased compressive strength in the absence of gypsum and decreased compressive strength less in the presence of gypsum, with vaterite's action more effective than that of calcite.

36 MATERIALS SCIENCE↗

The Dynamics of Unfolded versus Folder tRNA: The Role of Electrostatic Interactions

The dynamics of RNA contributes to its biological functions such as ligand recognition and catalysis. Using quasielastic neutron scattering spectroscopy, we show that Mg2+ greatly increases the picosecond to nanosecond dynamics of hydrated tRNA while stabilizing its folded structure. Analyses of the atomic mean-squared displacement, relaxation time, persistence length, and fraction of mobile atoms showed that unfolded tRNA is more rigid than folded tRNA. This same result was found for a sulfonated polystyrene, indicating that the increased dynamics in Mg2+ arises from improved charge screening of the polyelectrolyte rather than specific interactions with the folded tRNA. These results are opposite to the relationship between structural compactness and internal dynamics for proteins in which the folded state is more rigid than the denatured state. We conclude that RNA dynamics are strongly influenced by the electrostatic environment, in addition to the motions of local waters.

59 BASIC BIOLOGICAL SCIENCES↗

Simultaneous study of mechanical property development and early hydration chemistry in Portland cement slurries using X-ray diffraction and ultrasound reflection

A sample cell for the simultaneous measurement of synchrotron X-ray powder diffraction and ultrasound shear-wave reflection data from cement slurries is described. White cement slurries at 25 and 50 C with 0-3% bwoc CaCl{sub 2} were studied to illustrate the potential of the apparatus. The decrease in reflected S-wave amplitude, in dB, showed a linear correlation with C{sub 3}S hydration. CaCl{sub 2} retarded the development of G{prime} and G{double_prime} relative to the extent of C{sub 3}S hydration. At short times, there was a correlation between the time evolution of both G{prime} and G{double_prime}, and the amount of precipitated CH seen by diffraction, which was almost independent of CaCl{sub 2} concentration and temperature. CaCl{sub 2} addition resulted in a decrease in the amount of CH visible to X-rays, relative the degree of C{sub 3}S hydration. This may indicate a change in C-S-H gel C:S ratio or the presence of nanoscale CH that could not be seen by diffraction.

36 MATERIALS SCIENCE↗

New Developments in Femtosecond Soft X-ray Spectroscopy

Recent instrumentation developments in X-ray spectroscopy for ultra-fast time-resolved measurements with soft X-rays done in HZB Berlin during the last years are described. The significant performance improvements achieved this way are based on Fresnel diffraction from structures being fabricated on a surface of a total externally reflecting mirror. The first type of this spectrometer, an off-axis reflection zone plate, has been implemented at the BESSY Femtoslicing setup and shows on the order of 20 times higher flux in the focal plane compared to the classical grating monochromator beamline. It has proven to serve very precise experiments with a time resolution down to 100 fs on magnetic materials after optical laser pulse excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of thermal and athermal processing on the formation of buried SiC layers

In the present study, systematic investigations on 100 keV C ion implanted Si (100) substrates annealed subsequently at a temperature of 1000 deg. C for 2 h or athermally processed using 110 MeV Ni{sup 8+} ion irradiation have been performed. A detailed analysis using the techniques of x-ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy (TEM) at high resolutions is performed. The observations suggest the formation of cubic silicon carbide ({beta}-SiC) crystallites surrounded by an amorphous background in the samples thermally annealed at 1000 deg. C. However, ion irradiation did not influence the as-implanted layers to any significant extent. Various defects formed after annealing inside C implanted Si such as missing planes, edge dislocations, and grain boundaries during thermal crystallization are visualized through high resolution TEM.

36 MATERIALS SCIENCE↗

Time-delayed beam splitting with energy separation of x-ray channels

We introduce a time-delayed beam splitting method based on the energy separation of x-ray photon beams. It is implemented and theoretically substantiated on an example of an x-ray optical scheme similar to that of the classical Michelson interferometer. The splitter/mixer uses Bragg-case diffraction from a thin diamond crystal. Another two diamond crystals are used as back-reflectors. Because of energy separation and a minimal number (three) of optical elements, the split-delay line has high efficiency and is simple to operate. Due to the high transparency of diamond crystal, the split-delay line can be used in a beam sharing mode at x-ray free-electron laser facilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Monitoring the methanol conversion process in H-ZSM-5 using synchrotron X-ray powder diffraction-mass spectrometry

By monitoring the catalytic conversion of methanol using operando synchrotron powder X-ray diffraction (SXRD) and structure refinement, in combination with theoretical calculations, we demonstrate for the first time, that the concerted associative mechanism is responsible for dimethyl ether production via an activated protonated methanol intermediate species over H-ZSM-5 in an early stage of reaction at 200 °C. The minor contribution from the dissociative mechanism of the adsorbed methoxy intermediate species at Brønsted acid sites, renders their accumulation during the late stage of reaction, which leads to a build-up of the ‘hydrocarbon pool’ and eventually to ‘carbon’ through the formation of C-C bonds.

Lo, Benedict T W.↗

Anisotropic lattice expansion determined during flash sintering of BiFeO 3 by in-situ energy-dispersive X-ray diffraction

BiFeO 3 has a Curie temperature (T C ) of 825 °C, making it difficult to sinter with conventional methods while maintaining the purity of the material, as unavoidably secondary phases appear at temperatures above T c . Flash sintering is a relatively new technique that saves time and energy compared to other sintering methods. BiFeO 3 was flash sintered at 500 °C to achieve 90% densification. In-situ energy dispersive X-ray diffraction (EDXRD) reflected that the material did not undergo any phase transformation, having been sintered well below the T C . Interestingly, anisotropic lattice expansion in the materialwas observed when the sample was exposed to the electric field.

36 MATERIALS SCIENCE↗

Liquidus temperature in the spinel primary phase field: A comparison between optical and crystal fraction methods

Liquidus temperature (TL) was measured for simulated high-level waste borosilicate glasses covering a Hanford composition region, using an optical method and a crystal-fraction extrapolation method with X-ray diffraction data from isothermal heat treatments. The 38 glasses encompassed a one-component-at-a-time variation of a 16-component matrix. The TL values ranged from 1006°C to 1603°C. First-order polynomial models were fitted to data to obtain coefficients in terms of the effect of 1 mass% component addition on the TL: TL-increasing oxides Cr2O3 (264°C), “Others” (minor components, 163°C), oxides of noble metals (137°C), NiO (91°C), Al2O3 and Fe2O3 (~19–21°C); TL-decreasing oxides K2O (-26°C), Na2O (-41°C), and Li2O (-68°C); oxides of little effect MnO, P2O5, ZrO2, F, Bi2O3, SiO2, B2O3, and CaO (9 to -12°C). Also presented are temperatures (T1%) at which glasses contain 1 vol% of spinel as these values are considered relevant to the Hanford Tank Waste Treatment and Immobilization Plant. The measured and estimated values are compared and contrasted and the effect of TL and T1% on glass formulation is discussed.

crystal fraction↗

Toward an Autonomous Workflow for Single Crystal Neutron Diffraction

The operation of the neutron facility relies heavily on beamline scientists. Some experiments can take one or two days with experts making decisions along the way. Leveraging the computing power of HPC platforms and AI advances in image analyses, here we demonstrate an autonomous workflow for the single-crystal neutron diffraction experiments. The workflow consists of three components: an inference service that provides real-time AI segmentation on the image stream from the experiments conducted at the neutron facility, a continuous integration service that launches distributed training jobs on Summit to update the AI model on newly collected images, and a frontend web service to display the AI tagged images to the expert. Ultimately, the feedback can be directly fed to the equipment at the edge in deciding the next-step experiment without requiring an expert in the loop. With the analyses of the requirements and benchmarks of the performance for each component, this effort serves as the first step toward an autonomous workflow for real-time experiment steering at ORNL neutron facilities.

Yin, Junqi↗

Synthesis and structural features of 2-halo-2,2-dinitroacetamidoximes

Nitro compounds in which the halodinitromethyl group is bonded to the formamidoxime or halohydroxyiminomethyl moiety were obtained for the first time and characterized. The structures of some amidoximes were studied by experimental (X-ray diffraction) and theoretical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Electronic Properties of Indium-Doped n-type Cd-Se-Te Crystals

Here, we present a comprehensive investigation into the potential of n-type indium-doped cadmium selenide telluride (CST:In) as a high-performance candidate for solar cell applications, without the need for resource-intensive post-growth treatments that are required for CdTe:In. We compared undoped CST and CST:In crystals under different growth conditions, analyzing their structural and electronic properties using x-ray diffraction (XRD), electron probe microanalysis (EPMA), current-voltage (IV) and Hall effect measurements, time-resolved photoluminescence (TRPL), optical transmission, and photoluminescence (PL) mapping. The results reveal that as-grown CST:In crystals achieve nearly 100% carrier activation, yielding an electron concentration of 9.5x1018 cm -3 , mobility of 653 cm 2 /V.s and a 5 ns lifetime which approaches the radiative limit. Furthermore, comparison of PL maps from crystal growths having different cooling profiles suggests a strong effect of cooling rate on selenium segregation and cubic/hexagonal/polytype phase distribution. Slower cooling leads to a more homogeneous cubic structure with lower Se segregation, while a faster cooling rate results in increased Se segregation, and twin boundaries and stacking faults with polytypic and hexagonal character.

14 SOLAR ENERGY↗

Refine your search to explore more results.