Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Short Hydrogen Bonds on Reconstructed Nanocrystal Surface Enhance Oxygen Evolution Activity

Here, water splitting to generate hydrogen and oxygen gas is critical to renewable energy technologies, including fuel cells and rechargeable metal–air batteries. The oxygen evolution reaction (OER) has long been the bottleneck of water splitting because of its high overpotential (η) and sluggish kinetics, and development of efficient, stable, and non-noble-metal-based OER catalysts has been an extensively studied topic. Here, we propose short hydrogen bonds on reconstructed nanocrystal surface to enhance oxygen evolution activity by investigating three types of phase structures (β II , β I , and γ 0 ) of Li 2 CoSiO 4 (LCS) nanoparticles as OER electrocatalysts. Among them, the β II -LCS outperforms the previously reported Co-based catalysts and the state-of-the-art IrO 2 catalyst for OER in the alkaline condition. Our experiments combined with ab initio calculations indicated that due to the line-linked arrangement of Co active sites at the surface of β II -LCS, short hydrogen bonds (2.54 Å) are formed and linked into a network at the reconstructed surface by rotating the flexible CoO4 tetrahedra after surface delithiation, thus facilitating proton transfer and dissociation, leading to a unique dual-center catalytic pathway with low theoretical thermodynamic overpotential (0.35 eV) for the OER process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Advances of Structurally Ordered Intermetallic Nanoparticles for Electrocatalysis

Structurally ordered intermetallic phases have exhibited higher and higher electrocatalytic activity and stability than disordered alloys in reactions such as the oxygen reduction reaction (ORR) and the catalytic oxidation of fuels (hydrogen, formic acid, or ethanol). The enhanced electrocatalytic activity could be derived from the definite composition and predictable control over structural, geometric, and electronic effects. This review, based on the understanding of the catalytic mechanism of structurally ordered intermetallic nanoparticles, provides a comprehensive acknowledgement of how the particle size and morphology affect the catalytic performance. The strategy for reducing particle size and the impact of particle size on electrocatalysis will be firstly introduced. Then, recent developments in the synthesis and design of morphology-controlled catalysts are summarized. The structure-activity relationship between the catalytic activity and morphology including core-shell/hollow and porosity will be highlighted. Finally, the current challenges and future developments are provided. On the basis of this review, intermetallic compound shed light on the future development of electrocatalysts for fuel cells and metal-air batteries.

36 MATERIALS SCIENCE↗

Electrochemical Carbon Monoxide Reduction on Polycrystalline Copper: Effects of Potential, Pressure, and pH on Selectivity toward Multicarbon and Oxygenated Products

Here by understanding the surface reactivity of CO, which is a key intermediate during electrochemical CO 2 reduction, is crucial for the development of catalysts that selectively target desired products for the conversion of CO 2 to fuels and chemicals. In this study, a custom-designed electrochemical cell is utilized to investigate planar polycrystalline copper as an electrocatalyst for CO reduction under alkaline conditions. Seven major CO reduction products have been observed including various hydrocarbons and oxygenates which are also common CO 2 reduction products, strongly indicating that CO is a key reaction intermediate for these further-reduced products. A comparison of CO and CO 2 reduction demonstrates that there is a large decrease in the overpotential for C–C coupled products under CO reduction conditions. The effects of CO partial pressure and electrolyte pH are investigated; we conclude that the aforementioned large potential shift is primarily a pH effect. Thus, alkaline conditions can be used to increase the energy efficiency of CO and CO 2 reduction to C–C coupled products, when these cathode reactions are coupled to the oxygen evolution reaction at the anode. Further analysis of the reaction products reveals common trends in selectivity that indicate both the production of oxygenates and C–C coupled products are favored at lower overpotentials. These selectivity trends are generalized by comparing the results on planar Cu to current state-of-the-art high-surface-area Cu catalysts, which are able to achieve high oxygenate selectivity by operating at the same geometric current density at lower overpotentials. Combined, these findings outline key principles for designing CO and CO 2 electrolyzers that are able to produce valuable C–C coupled products with high energy efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Combining Experiment and Theory To Unravel the Mechanism of Two-Electron Oxygen Reduction at a Selective and Active Co-catalyst

In this work, we present a combination of comprehensive experimental and theoretical evidence to unravel the mechanism of two-electron oxygen reduction reaction (ORR) on a catalyst composed of mildly reduced graphene oxide supported on P50 carbon paper (mrGO/P50). This catalyst is unique in that it shows >99% selectivity toward H 2 O 2 , the highest mass activity to date, and essentially zero overpotential in base. Furthermore, the mrGO catalytically active site is unambiguously identified and presents a unique opportunity to investigate mechanisms of carbon-based catalysis in atomistic detail. A wide range of experiments at varying pH are reported: ORR onset potential, Tafel slopes, H/D kinetic isotope effects, and O 2 reaction order. With DFT reaction energies and known thermodynamic parameters, we calculate the potential and pH-dependent free energies of all possible intermediates in this ORR and propose simple kinetic models that give semiquantitative agreement with all experiments. Our results show that mrGO is semiconducting and cannot support the conventional mechanism of coherently coupled proton–electron transfers. The conducting P50 provides electrons for initiating the ORR via outer sphere electron transfer to O 2 (aq), while the semiconducting mrGO provides the active catalytic sites for adsorption of O 2 – (aq) or HO 2 (aq), depending upon electrolyte pH. Due to this unique synergistic effect, we describe the mrGO/P50 as a co-catalyst. Lastly, this concept implies departure from the traditional picture of predicting catalytic activity trends based on a single descriptor, and the co-catalyst design strategy may generally enable other semiconductors to function as electrocatalysts as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox-Mediator-Assisted Electrocatalytic Hydrogen Evolution from Water by a Molybdenum Sulfide-Functionalized Metal–Organic Framework

The Zr 6 -based metal–organic framework NU-1000 was successfully functionalized with candidate catalysts—MoS x units—via SIM (solvothermal deposition in MOFs) of molybdenum(VI), followed by reaction with H2S gas. The structure of the material, named MoS x - SIM, was characterized spectroscopically and through a single-crystal X-ray diffraction measurement. These measurements and others established that the catalyst is monometallic, with mixed oxygen and sulfur coordination, and that it forms from a MOF-node-supported molybdenum-based cluster featuring only oxy ligands. Notably, the formal potential for the MOF-grafted complex, like that for the metal–sulfur active site of hydrogenase, is nearly coincident with the formal potential for the hydrogen couple. Its effective concentration within the mesoporous MOF is several hundred millimolar, and its porous-framework-based immobilization/heterogenization obviates the need for aqueous solubility as a condition for use as a well-defined catalyst. MoS x - SIM was evaluated as an electrocatalyst for evolution of molecular hydrogen from aqueous acid. Although the MoS x - functionalized framework exhibits catalytic behavior, the highly insulating nature of the support inhibits high electrocatalytic performance. Introduction of an archetypal redox mediator (RM), methyl viologen (MV 2+ ), resulted in more than 20-fold enhancement in its catalytic performance on a turnover frequency basis, implying efficient RM-assisted electron transfer to otherwise electrochemically non-addressable MoS x moieties. Electrochemical kinetic studies with additional viologens as mediators reveal an unexpected square-root dependence of overall reaction rate on mediator concentration, as well as sensitivity to the strength of RM •+ as a reductant. These observations, together with observations of potential-dependent H/D isotope effects and potential-dependent pH effects, provide useful insights into the catalysis mechanism and help to explain how the MOF-affixed monometallic catalyst can effectively catalyze a two-electron reduction reaction, i.e., hydrogen evolution from acidified water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-Nanometer-Thick Pt 3 Ni Bimetallic Alloy Nanowires Advanced Oxygen Reduction Reaction: Integrating Multiple Advantages into One Catalyst

Developing highly active as well as durable oxygen reduction reaction (ORR) electrocatalysts are still imperative for clean and efficient energy conversion device, such as fuel cells and metal-air battery. For this purpose and maximize the utilization of noble Pt, we present here a facile, yet scalable strategy for the high-precise synthesis of 1-nm-thick Pt 3 Ni bimetallic alloy nanowires (Pt 3 Ni BANWs). The seed-mediated growth mechanism of Pt 3 Ni BANWs was identified subsequently. As expected, the Pt 3 Ni BANWs delivered enhanced mass activity (0.546 A mgPt –1 , exceeding the 2020 target of DOE) in comparison to Pt nanowires assembly (Pt NWA, 0.098 A mgPt –1 ) and Pt/C (Pt, 0.135 A mgPt –1 ), because of the rational integration of multiple compositional and structural advantages. Moreover, the Pt 3 Ni BANWs displayed enhanced durability (37% MA retention) than Pt NWA and Pt after 50 000 potential cycles. All these results indicate that the ultrathin Pt 3 Ni BANWs are potential candidates for catalyzing ORR with acceptable activity and durability. In conclusion, the present work could not only provide a facile strategy but also a general guidance for the design of superb performance Pt-based nanowire catalysts for ORR.

25 ENERGY STORAGE↗

Mechanisms of Two-Electron and Four-Electron Electrochemical Oxygen Reduction Reactions at Nitrogen-Doped Reduced Graphene Oxide

Doped carbon-based systems have been extensively studied over the past decade as active electrocatalysts for both the two-electron (2e – ) and four-electron (4e – ) oxygen reduction reactions (ORRs). However, the mechanisms for ORR are generally poorly understood. Here, we report an extensive experimental and first-principles theoretical study of the ORR at nitrogen-doped reduced graphene oxide (NrGO). We synthesize three distinct NrGO catalysts and investigate their chemical and structural properties in detail via X-ray photoelectron spectroscopy, infrared and Raman spectroscopies, high-resolution transmission electron microscopy, and thin-film electrical conductivity. ORR experiments include the pH dependences of 2e – versus 4e – ORR selectivity, ORR onset potentials, Tafel slopes, and H/D kinetic isotope effects. These experiments show very different ORR behavior for the three catalysts, in terms of both selectivity and the underlying mechanism, which proceeds either via coupled proton–electron transfers (CPETs) or non-CPETs. Reasonable structural models developed from density functional theory rationalize this behavior. The key determinant between CPET vs non-CPET mechanisms is the electron density at the Fermi level under operating ORR conditions. Regardless of the reaction mechanism or electrolyte pH, however, we identify the ORR active sites as sp 2 carbons that are located next to oxide regions. This assignment highlights the importance of oxygen functional groups, while details of (modest) N-doping may still affect the overall catalytic activity, and likely also the selectivity, by modifying the general chemical environment around the active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anions in Corrosion: Influence of Polymer Electrolytes on the Interfacial Ion Transfer Kinetics of Cu at Au(111) Surfaces

The corrosion kinetics of metals in the presence of polymer electrolytes—which are often used in devices for the electrochemical production of hydrogen, hydrocarbons, and alcohols—is convoluted by transport and ill-defined reactive interfaces which mask the fundamental reaction kinetics. Underpotential-deposited monolayers of Cu at Au(111) surfaces provide a structurally welldefined active site for interfacial ion transfer, with a fixed number of sites available for adsorption. Here, we investigate the adsorption behavior of Cu at Au(111) surfaces across a series of sulfate and sulfonate electrolytes, to understand how anion structure influences the kinetics of elementary interfacial ion-transfer reactions. The influence of anion structure is most significant at high adsorbate coverage, with similar adsorption isotherms and kinetics observed for all three molecular sulfates and sulfonates. In contrast, a suspended perfluorosulfonic acid ionomer reduced both the equilibrium coverage of Cu as well as the standard exchange rate at Au(111) at low coverages of Cu. These results suggest that electrocatalyst corrosion is inhibited for metal nanoparticles supported at polymer electrolytes due to changes in adsorbate coverage as well as suppressed kinetics for interfacial ion transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Evolution on Mechanically Strained TiO2/NiTi: Implications of Compositional Heterogeneity at (Photo)Electrocatalytic Interfaces

The adsorption and activation energetics underpinning small molecule conversion on heterogeneous (photo)electrocatalysts are intrinsically tied to catalyst surface properties. Absent compositional characterization techniques with sufficient interface sensitivity, however, (photo)electrochemical performance can be misinterpreted in the context of bulk or near-surface material properties. Here we provide a fundamental investigation of the convoluting role of near-surface compositional heterogeneity in the interpretation of (photo)electrochemical alkaline oxygen evolution reaction (OER) activity, highlighting challenges in correlating composition measured by surface- and near-surface-sensitive probes. TiO2 thin films grown by air-annealing the superelastic alloy Nitinol (TiO2/NiTi) crack under tensile mechanical strain, increasing the number of electrochemically active Ni sites (Ni site density) that are probed via voltammetric features corresponding to Ni3+/Ni2+ redox events. (Photo)electrochemical OER kinetics trend with Ni site density, with overpotentials and Tafel slopes decreasing for Ni site densities < 1013 Ni/cm2geo and asymptotically approaching the performance of the base NiTi substrate for Ni site densities > 1013 Ni/cm2geo. Photoelectrochemical fill factors follow similar Ni site density dependent trends. When probing unstrained TiO2/NiTi, Ni site densities are two orders of magnitude higher when comparing near-surface-sensitive techniques (e.g., X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (TOF-SIMS), and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS)) to surface-sensitive electrochemical measurements. This result highlights the challenge of correlating kinetic performance with intrinsic surface properties of electrochemical interfaces in the presence of near-surface compositional heterogeneity. Further, it reinforces the importance of fundamental investigations of surfaces with well-controlled composition and structure and the need for physically grounded and self-consistent interpretation of multiple near-surface characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Pure to Seawater Electrolysis: Unveiling the Impact of Ionic Species and Contaminants on Electrocatalysis

Water electrolysis, including seawater splitting to produce hydrogen and oxygen, stands as a promising approach for the efficient storage of intermittent energy. However, the half-reactions of water splitting, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), are known to be very sensitive toward the quality of water employed and are susceptible to contaminants originating from various sources, including the electrolyte or the electrodes. Those contaminants have a profound impact on the activity of these reactions of water splitting by modifying the electronic and physical structures of electrocatalysts as well as electrode–electrolyte interfaces. For seawater electrolysis, the unintentional presence of impurities, such as anions, cations, and organic compounds, affects the catalyst stability, selectivity, and activity. Despite the existence of numerous comprehensive reviews that delve into various aspects of catalysts and their structure–property relationships for several electrocatalytic reactions, the impact of contaminants has often been ignored. This critical review endeavors to address this issue by providing an overview of the diverse sources of contaminants influencing electrocatalytic water splitting and seawater splitting reactions, delineating the trends in electrochemical parameters and detailing different characterization methods for elucidating the physical and electronic changes of the electrode and electrolyte.

HER↗

Isotopically Selective Quantification by UPLC-MS of Aqueous Ammonia at Submicromolar Concentrations Using Dansyl Chloride Derivatization

Ammonia (NH 3 ) is necessary for food production and is commercially synthesized from nitrogen (N 2 ) and hydrogen (H 2 ) using the Haber–Bosch process. Significant amounts of ammonia are made every year in a reaction that requires high temperatures and pressures, with the Haber–Bosch accounting for ~1.6% of total annual global energy consumption. Electrocatalysts are also being explored to convert in an environmentally friendly manner N 2 to NH 3 at ambient temperature and pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Robust, Scalable Platform for the Electrochemical Conversion of CO 2 to Formate: Identifying Pathways to Higher Energy Efficiencies

This work demonstrated a robust, scalable cell architecture for electroreduction of CO 2 (CO 2 R). An up to 90% faradaic efficiency for the conversion of CO 2 R to formate at 500 mA/cm 2 was realized at a 25 cm2 gas diffusion electrode (GDE) with a carbon-supported SnO 2 electrocatalyst. Furthermore, a 1.27 mm thick catholyte was used between the bipolar membrane and cathode GDE, which could be further reduced to tens of micrometers upon refinement. The deconvolution of the potential drop from each individual component/process guides the pathways to higher energy efficiencies of CO 2 R at this platform. Significant changes in the agglomerate size and aspect ratio on the electrode before and after an 11 h test were revealed by nano-CT, suggesting reduced CO 2 accessibility from electrode degradation. The versatility of this CO 2 R testing platform enables the ability to assess materials, components, and interactions at scales more in line with future devices.

30 DIRECT ENERGY CONVERSION↗

Wood Carbon Based Single-Atom Catalyst for Rechargeable Zn–Air Batteries

Low-cost and efficient oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) bifunctional electrocatalysts are vital for the applications of rechargeable Zn-air batteries (ZABs). Given the high catalytic activity of single-atom catalysts (SACs), preparing SACs on a large scale for ZABs is desirable but remains challenging. Herein, in situ formation of single-atom Fe-N-C catalysts on plate wood-based porous carbon is achieved via a facile Lewis acid pretreatment and carbonization process. Lewis acid FeCl3 pretreatment on the cell wall of wood not only produces abundant microchannels but also successfully introduces atomically dispersed Fe-N active species into the hierarchical structure. Such uniformly dispersive SACs on the hierarchical structure enhance the ORR/OER performance and durability. A ZAB using the catalyst in the cathode shows a high power density (70.2 mW cm -2 , at quasi solid state) and long-term stability. This work provides a new path for the large-scale preparation of high-performance SACs.

25 ENERGY STORAGE↗

Controlling Catalyst–Semiconductor Contacts: Interfacial Charge Separation in p-InP Photocathodes

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. As a result, the new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

14 SOLAR ENERGY↗

Technoeconomic Model and Pathway to <$2/kg Green Hydrogen Using Integrated Halide Perovskite Photoelectrochemical Cells

The cost of gray hydrogen produced via fossil fuel-based steam-methane reforming has led the U.S. Department of Energy to specify <$\$$2/kg H 2 as a target for commercially competitive green hydrogen generation methods. Integrated photoelectrochemical cells have been proposed as a solar-to-hydrogen conversion technology. In this paper we describe a technoeconomically feasible pathway to reaching <$\$$2/kg green H 2 using integrated photoelectrochemical cells with halide perovskite photoabsorbers, low-cost conductive barriers, and low precious metal-content catalysts in an aqueous, membrane-separated cell. A base-case solar-to-hydrogen conversion efficiency of 20%, stable lifetime of 10 years, and a combined electrocatalyst-plus-panel cost of $\$$50/m 2 enabled a levelized cost of hydrogen of $\$$2.43/kg, which dropped below $\$$2/kg with improved performance metrics including material cost, improvements in process design, or subsidies. We relate these metrics to lab-scale reports to recommend best research practices for scientists and funding agencies working at this intersection of photovoltaics, electrocatalysis, and surface science.

$1/kg↗

Surface Composition Impacts Selectivity of ZnTe Photocathodes in Photoelectrochemical CO 2 Reduction Reaction

Light-driven reduction of CO 2 into chemicals using a photoelectrochemical (PEC) approach is considered as a promising way to meet the carbon neutral target. The very top surface of the photoelectrode and semiconductor/electrolyte interface plays a pivotal role in defining the performance for PEC CO 2 reduction. However, such impact remains poorly understood. Here, we report an electrodeposition-annealing route for tailoring surface composition of ZnTe photocathodes. Our work demonstrates that a Zn-rich surface on the ZnTe photocathode is essential to impact the CO 2 reduction activity and selectivity. In particular, the Zn-rich surface not only facilitated the interfacial charge carrier transfer, but also acted as electrocatalyst for boosting carbon product selectivity and suppressing the hydrogen evolution reaction. This work provides a new avenue to optimize the photocathode, as well as improvement of the CO 2 RR performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasma-Assisted Surface Nitridation of Proton Intercalatable WO 3 for Efficient Electrocatalytic Ammonia Synthesis

Electrocatalytic nitrogen reduction (eNRR) offers a green pathway for the production of NH 3 from N 2 and H 2 O under ambient conditions. Transition metal oxynitrides (TMO x N y ) are among the most promising catalysts but face challenges in achieving a high yield and faradaic efficiency (FE). This work develops a hybrid WO x N y /WO 3 catalyst with a unique heterogeneous interfacial complexion (HIC) structure. This design enables in situ generation and delivery of highly active hydrogen atoms (H*) in acidic electrolytes, promoting nitrogen hydrogenation and the formation of nitrogen vacancies (Nv) on the WO x N y surface. This significantly enhances the selectivity of eNRR for NH 3 synthesis while suppressing the hydrogen evolution reaction (HER). A simple two-step fabrication process─microwave hydrothermal growth followed by plasma-assisted surface nitridation─was developed to fabricate the designed catalyst electrode, achieving an NH 3 yield of 3.2 × 10 –10 mol·cm –2 ·s –1 with 40.1% FE, outperforming most TMN/TMO x N y electrocatalysts. Multiple control experiments confirm that the eNRR follows an HIC-enhanced Mars–van Krevelen (MvK) mechanism.

Catalysts↗

Active and stable Ir@Pt core–shell catalysts for electrochemical oxygen reduction

Electrochemical oxygen reduction is an important reaction for many sustainable energy technologies, such as fuel cells and metal–air batteries. Kinetic limitations of this reaction, expensive electrocatalysts, and catalyst instability, however, limit the commercial viability of such devices. Herein, we report an active Ir@Pt core–shell catalyst that combines platinum overlayers with nanostructure effects to tune the oxygen binding to the Pt surface, thereby achieving enhanced activity and stability for the oxygen reduction reaction. Ir@Pt nanoparticles with several shell thicknesses were synthesized in a scalable, inexpensive, one-pot polyol method. Electrochemical analysis demonstrates the activity and stability of the Ir@Pt catalyst, with specific and mass activities increasing to 2.6 and 1.8 times that of commercial Pt/C (TKK), respectively, after 10 000 stability cycles. Furthermore, activity enhancement of the Ir@Pt catalyst is attributed to weakening of the oxygen binding to the Pt surface induced by the Ir core.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Refine your search to explore more results.