Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Density of Electronic States in the Conduction Band of Ultrathin Films of Naphthalenedicarboxylic Anhydride and Naphthalenetetracarboxylic Dianhydride on the Surface of Oxidized Silicon

The results of examination of the electronic structure of the conduction band of naphthalenedicarboxylic anhydride (NDCA) films in the process of their deposition on the surface of oxidized silicon are presented. These results were obtained using total current spectroscopy (TCS) in the energy range from 5 to 20 eV above the Fermi level. The energy position of the primary maxima of the density of unoccupied states (DOUS) of an NDCA film was determined based on the experimental TCS data and calculated data and compared with the position of the DOUS maxima of a naphthalenetetracarboxylic dianhydride (NTCDA) film. The theoretical analysis involved calculating the energies and the spatial distribution of orbitals of the molecules under study at the B3LYP/6-31G(d) DFT (density functional theory) level and correcting the obtained energies in accordance with the procedure that was proven effective in earlier studies of the conduction band of films of small conjugated organic molecules. It was found that the DOUS maxima of the NTCDA film in the studied energy interval from 5 to 20 eV above the Fermi level are shifted toward lower electron energies by 1–2 eV relative to the corresponding DOUS maxima of the NDCA film Subdivision of the Ufa Federal Research Centre of the.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron-ion dynamics in laser-assisted desorption of hydrogen atoms from H-Si(111) surface

In the framework of real time real space time-dependent density functional theory we have studied the electron-ion dynamics of a hydrogen-terminated silicon surface H-Si(111) subjected to intense laser irradiation. Two surface fragments of different sizes have been used in the simulations. When the intensity and duration of the laser exceed certain levels (which depend on the wavelength) we observe the desorption of the hydrogen atoms, while the underlying silicon layer remains essentially undamaged. Upon further increase of the laser intensity, the chemical bonds between silicon atoms break as well. The results of the simulations suggest that with an appropriate choice of laser parameters it should be possible to remove the hydrogen layer from the H-Si(111) surface in a matter of a few tens of femtoseconds. We have also observed that at high laser field intensities (2-4 V/A in this work) the desorption occurs even when the laser frequency is smaller than the optical gap of the silicon surface fragments. Therefore, nonlinear phenomena must play an essential role in such desorption processes.

36 MATERIALS SCIENCE↗

Effect of Pressure on the Electronic, Magnetic, and Optical Properties of the In{sub 0.75}Cr{sub 0.25}P Compound

Using the density functional theory (DFT) approach and full-potential linearized augmented plane waves (FP-LAPW) method, some of the electronic (density of states, band structure, and Fermi surfaces), magnetic (total and local magnetic moments, spin polarization, exchange constants), and optical properties (dielectric function, energy loss function, and refractive index) were investigated. The GGA + U approximation was used for the exchange-correlation term. The effect of hydrostatic pressure up to 20 GP has been studied on these properties. The results show that the In{sub 0.75}Cr{sub 0.25}P compound is a half metal with 100% spin polarization at the Fermi level and the increment of pressure does not change its half-metallic behavior. The half-metal gap achieved for this compound is variable between 1.38 and 1.5 eV. The interaction between Cr and P atoms in this compound is an anti-ferromagnetic type. It was observed that the total magnetic moment for this compound is about 3 μ{sub B}. Local magnetic moments change with increasing pressure, but the total magnetic moment remains unaffected by increasing the pressure. Calculations of the optical properties of the In{sub 0.75}Cr{sub 0.25}P compound showed that the dominant mechanism for the low-energy photons is due to the induced free carriers of the Cr atom, and the optical properties of this compound, in particular the refractive index in the visible region, change with increasing pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of the selective manganese doping of GaAs structures

The effect of technological parameters on the selective manganese doping of arsenide–gallium heterostructures fabricated by a combination of methods of MOS-hydride epitaxy and pulsed-laser deposition is investigated. As these parameters, the impurity content in the manganese δ layer and the structureformation temperature are used. It is established that the prepared structures demonstrate the highest electrical activity and have ferromagnetic properties at a growth temperature of ~400°C and an impurity content of no higher than 0.2–0.3 monolayers. Studying the grown structures by the methods of reflection spectroscopy, high-resolution transmission electron microscopy, and secondary-ion mass spectrometry shows that use of the above conditions in the case of pulsed laser deposition makes it possible to obtain arsenide–gallium structures, which have good crystalline quality, and manganese is concentrated in them within a thin (7–8 nm) layer without substantial diffusion-induced spreading and segregation.

36 MATERIALS SCIENCE↗

Impact of the coordination of multiple Lewis acid functions on the electronic structure and v n configuration of a metal center

Here, the covalent bond classification (CBC) method represents a molecule as ML l X x Z z by evaluating the total number of L, X and Z functions interacting with M. The CBC method is a simplistic approach that is based on the notion that the bonding of a ligating atom (or group of atoms) can be expressed in terms of the number of electrons it contributes to a 2-electron bond. In many cases, the bonding in a molecule of interest can be described in terms of a 2-center 2-electron bonding model and the ML l X x Z z classification can be derived straightforwardly by considering each ligand independently. However, the bonding within a molecule cannot always be described satisfactorily by using a 2-center 2-electron model and, in such situations, the ML l X x Z z classification requires a more detailed consideration than one in which each ligand is treated in an independent manner. The purpose of this article is to provide examples of how the ML l X x Z z classification is obtained in the presence of multicenter bonding interactions. Specific emphasis is given to the treatment of multiple π-acceptor ligands and the impact on the v n configuration, i.e. the number of formally nonbonding electrons on an element of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress on First-Principles Calculations and Experimental Results of Single-crystalline Magnetic Tunnel Junctions with MgO barriers

Since the theoretical prediction and experimental observation of giant tunneling magnetoresistance (TMR) effect at room temperature in magnetic tunnel junctions (MTJs) with single-crystalline MgO(001) barrier, MgO-based MTJs have been extensively studied due to their broad potential applications in spintronic devices. In this paper, progress on theoretical calculations and experimental results in MgO-based MTJs is reported. Spin-dependent electronic structure and transport properties of MgO-based MTJs, including structures of Fe(001)/MgO/Fe, Fe(001)/FeO/MgO/Fe, Fe(001)/Mg/MgO/Fe, Fe(001)/Co/MgO/Co/Fe, and Fe(001)/MgO/Fe/MgO/Fe, have been studied using the Layer-KKR first-principles method. The quantitative result not only provide a better way to understand the electronic structures and spin-dependent transport properties of MgO-based MTJs, but also shows a direction to exploit new kinds of spintronic materials with high room-temperature TMR ratio.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modulating Carrier Transport via Defect Engineering in Solar Water Splitting Devices

Developing sustainable solar water splitting devices requires efficient separation and transport of photogenerated carriers. In this Perspective, we examine carrier transport in semiconductor photoelectrodes using bismuth vanadate as a primary model system and highlight strategies to significantly improve carrier delivery through defect engineering. To improve electron transport in low-mobility semiconductors, we introduce two distinct bulk doping methods, by homogeneously enhancing the bulk defect level or by forming distributed homojunctions with graded doping. Next, we demonstrate the use of structural boundaries as extrinsic pathways for fast electron transport, thus providing novel insights to engineer materials’ macroscopic conductivity. Third, we describe the importance of interface design in terms of structural, chemical, and electronic matching at the back contact to suppress carrier recombination. Lastly, we highlight the methods for surface defect control via passivation and catalysis and give a brief outlook of research challenges and opportunities for solar water splitting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Band structure of silicene in the tight binding approximation

The electronic structure of silicene is simulated by the tight binding method with the basis sp{sup 3}d{sup 5}s*. The results are in good agreement with ab initio calculations. The effective Hamiltonian of silicene in the vicinity of the Dirac point is constructed by the method of invariants. Silicon atoms in silicene are located in two parallel planes displaced perpendicularly to each other by Δ{sub z}; the energy spectrum essentially depends on this displacement. Using the tight binding technique, the coefficients of the effective Hamiltonian are determined for various values of Δ{sub z}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulations of radiation damage as a function of the temporal pulse profile in femtosecond X-ray protein crystallography

Serial femtosecond X-ray crystallography of protein nanocrystals using ultrashort and intense pulses from an X-ray free-electron laser has proved to be a successful method for structural determination. However, due to significant variations in diffraction pattern quality from pulse to pulse only a fraction of the collected frames can be used. Experimentally, the X-ray temporal pulse profile is not known and can vary with every shot. This simulation study describes how the pulse shape affects the damage dynamics, which ultimately affects the biological interpretation of electron density. The instantaneously detected signal varies during the pulse exposure due to the pulse properties, as well as the structural and electronic changes in the sample. Here ionization and atomic motion are simulated using a radiation transfer plasma code. Pulses with parameters typical for X-ray free-electron lasers are considered: pulse energies ranging from 10 4 to 10 7 J cm -2 with photon energies from 2 to 12 keV, up to 100 fs long. Radiation damage in the form of sample heating that will lead to a loss of crystalline periodicity and changes in scattering factor due to electronic reconfigurations of ionized atoms are considered here. The simulations show differences in the dynamics of the radiation damage processes for different temporal pulse profiles and intensities, where ionization or atomic motion could be predominant. Overall, the different dynamics influence the recorded diffracted signal in any given resolution and will affect the subsequent structure determination.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Communication: Smoothing out excited-state dynamics: Analytical gradients for dynamically weighted complete active space self-consistent field

State averaged complete active space self-consistent field (SA-CASSCF) is a workhorse for determining the excited-state electronic structure of molecules, particularly for states with multireference character; however, the method suffers from known issues that have prevented its wider adoption. One issue is the presence of discontinuities in potential energy surfaces when a state that is not included in the state averaging crosses with one that is. In this communication I introduce a new dynamical weight with spline (DWS) scheme that mimics SA-CASSCF while removing energy discontinuities due to unweighted state crossings. In addition, analytical gradients for DWS-CASSCF (and other dynamically weighted schemes) are derived for the first time, enabling energy-conserving excited-state ab initio molecular dynamics in instances where SA-CASSCF fails.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electromodulation spectroscopy of highly mismatched alloys

The electronic band structure of highly mismatched alloys (HMAs) was very successfully explored using electromodulation (EM) spectroscopy, i.e., photoreflectance (PR), electroreflectance, and contactless electroreflectance (CER). With these techniques, the optical transitions between the valence band and the E – and E + bands, which are formed in the conduction band of dilute nitrides and dilute oxides, were observed and used to formulate the band anticrossing model, which well describes the electronic band structure of HMAs. In this tutorial, principles of EM spectroscopy are presented and shortly discussed. Special attention is focused on PR and CER techniques, which are nondestructive and have recently been widely applied to study the electronic band structure of HMAs and low dimensional heterostructures containing HMAs. For these methods, experimental setups are described, and theoretical approaches to analyze the experimental data are introduced. Finally, to show the utility of EM spectroscopy, selected examples of the application of this method to study various issues in HMAs are presented and briefly discussed.

36 MATERIALS SCIENCE↗

Sulfur X-Ray Absorption And Vibrational Spectroscopic Study of Sulfur Dioxide, Sulfite, And Sulfonate Solutions And of the Substituted Sulfonate Ions X(3)CSO(3-)(X = H, Cl, F)

Sulfur K-edge X-ray absorption near-edge structure (XANES) spectra have been recorded and the S(1s) electron excitations evaluated by means of density functional theory-transition potential (DFT-TP) calculations to provide insight into the coordination, bonding, and electronic structure. The XANES spectra for the various species in sulfur dioxide and aqueous sodium sulfite solutions show considerable differences at different pH values in the environmentally important sulfite(IV) system. In strongly acidic (pH < {approx}1) aqueous sulfite solution the XANES spectra confirm that the hydrated sulfur dioxide molecule, SO{sub 2}(aq), dominates. The theoretical spectra are consistent with an OSO angle of {approx}119{sup o} in gas phase and acetonitrile solution, while in aqueous solution hydrogen bonding reduces the angle to {approx}116{sup o}. The hydration affects the XANES spectra also for the sulfite ion, SO{sub 3}{sup 2-}. At intermediate pH (4) the two coordination isomers, the sulfonate (HSO{sub 3{sup -}}) and hydrogen sulfite (SO{sub 3}H{sup -}) ions with the hydrogen atom coordinated to sulfur and oxygen, respectively, could be distinguished with the ratio HSO{sub 3{sup -}}:SO{sub 3}H{sup -} about 0.28:0.72 at 298 K. The relative amount of HSO{sub 3{sup -}} increased with increasing temperature in the investigated range from 275 to 343 K. XANES spectra of sulfonate, methanesulfonate, trichloromethanesulfonate, and trifluoromethanesulfonate compounds, all with closely similar S-O bond distances in tetrahedral configuration around the sulfur atom, were interpreted by DFT-TP computations. The energy of their main electronic transition from the sulfur K-shell is about 2478 eV. The additional absorption features are similar when a hydrogen atom or an electron-donating methyl group is bonded to the -SO{sub 3} group. Significant changes occur for the electronegative trichloromethyl (Cl{sub 3}C-) and trifluoromethyl (F{sub 3}C-) groups, which strongly affect the distribution especially of the {pi} electrons around the sulfur atom. The S-D bond distance 1.38(2) {angstrom} was obtained for the deuterated sulfonate (DSO{sub 3{sup -}}) ion by Rietveld analysis of neutron powder diffraction data of CsDSO{sub 3}. Raman and infrared absorption spectra of the CsHSO{sub 3}, CsDSO{sub 3}, H{sub 3}CSO{sub 3}Na, and Cl{sub 3}CSO{sub 3}Na{center_dot}H{sub 2}O compounds and Raman spectra of the sulfite solutions have been interpreted by normal coordinate calculations. The C-S stretching force constant for the trichloromethanesulfonate ion obtains an anomalously low value due to steric repulsion between the Cl{sub 3}C- and -SO{sub 3} groups. The S-O stretching force constants were correlated with corresponding S-O bond distances for several oxosulfur species.

08 HYDROGEN↗

A combined DFT and restricted open-shell configuration interaction method including spin-orbit coupling: Application to transition metal L-edge X-ray absorption spectroscopy

A novel restricted-open-shell configuration interaction with singles (ROCIS) approach for the calculation of transition metal L-edge X-ray absorption spectra is introduced. In this method, one first calculates the ground state and a number of excited states of the non-relativistic Hamiltonian. By construction, the total spin is a good quantum number in each of these states. For a ground state with total spin S excited states with spin S Prime = S, S - 1, and S + 1 are constructed. Using Wigner-Eckart algebra, all magnetic sublevels with M{sub S}= S, Horizontal-Ellipsis , -S for each multiplet of spin S are obtained. The spin-orbit operator is represented by a mean-field approximation to the full Breit-Pauli spin-orbit operator and is diagonalized over this N-particle basis. This is equivalent to a quasi-degenerate treatment of the spin-orbit interaction to all orders. Importantly, the excitation space spans all of the molecular multiplets that arise from the atomic Russell-Saunders terms. Hence, the method represents a rigorous first-principles approach to the complicated low-symmetry molecular multiplet problem met in L-edge X-ray absorption spectroscopy. In order to gain computational efficiency, as well as additional accuracy, the excitation space is restricted to single excitations and the configuration interaction matrix is slightly parameterized in order to account for dynamic correlation effects in an average way. To this end, it is advantageous to employ Kohn-Sham rather than Hartree-Fock orbitals thus defining the density functional theory/ROCIS method. However, the method can also be used in an entirely non-empirical fashion. Only three global empirical parameters are introduced and have been determined here for future application of the method to any system containing any transition metal. The three parameters were carefully calibrated using the L-edge X-ray absorption spectroscopy spectra of a test set of coordination complexes containing first row transition metals. These parameters are universal and transferable. Hence, there are no adjustable parameters that are used to fit experimental X-ray absorption spectra. Thus, the new approach classifies as a predictive first-principles method rather than an analysis tool. A series of calculations on transition metal compounds containing Cu, Ti, Fe, and Ni in various oxidation and spin states is investigated and a detailed comparison to experimental data is reported. In most cases, the approach yields good to excellent agreement with experiment. In addition, the origin of the observed spectral features is discussed in terms of the electronic structure of the investigated compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion-conduction mechanisms in NaSICON-type membranes for energy storage and utilization

Next generation metal-ion conducting membranes are key to developing energy storage and utilization technologies like batteries and fuel cells. Sodium super-ionic conductors (aka NaSICON) are a class of compounds with AM 1 M 2 (PO 4 ) 3 stoichiometry where the choice of “A” and “M” cation varies widely. This report, which describes substitutional derivatives of NZP (NaZr2P 3 O 12 ), summarizes the accomplishments of a Laboratory Directed Research and Development (LDRD) project to analyze transport mechanisms using a combination of in situ studies of structure, composition, and bonding, combined with first principles theory and modeling. We developed an experimental platform and applied methods, such as synchrotronbased X-ray spectroscopies, to probe the electronic structure of compositionally well-controlled NaSICON films while in operation (i.e., conducting Na ions exposed to oxygen or water vapor atmospheres). First principles theory and modeling were used to interpret the experimental observations and develop an enhanced understanding of atomistic processes that give rise to, and affect, ion conduction.

25 ENERGY STORAGE↗

Excitonic couplings between molecular crystal pairs by a multistate approximation

In this paper, we present a diabatization scheme to compute the excitonic couplings between an arbitrary number of states in molecular pairs. The method is based on an algebraic procedure to find the diabatic states with a desired property as close as possible to that of some reference states. In common with other diabatization schemes, this method captures the physics of the important short-range contributions (exchange, overlap, and charge-transfer mediated terms) but it becomes particularly suitable in presence of more than two states of interest. The method is formulated to be usable with any level of electronic structure calculations and to diabatize different types of states by selecting different molecular properties. These features make the diabatization scheme presented here especially appropriate in the context of organic crystals, where several excitons localized on the same molecular pair may be found close in energy. In this paper, the method is validated on the tetracene crystal dimer, a well characterized case where the charge transfer (CT) states are closer in energy to the Frenkel excitons (FE). The test system was studied as a function of an external electric field (to explore the effect of changing the relative energy of the CT excited state) and as a function of different intermolecular distances (to probe the strength of the coupling between FE and CT states). Additionally, we illustrate how the approximation can be used to include the environment polarization effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adaptively Compressed Exchange Operator for Large-Scale Hybrid Density Functional Calculations with Applications to the Adsorption of Water on Silicene

Density functional theory (DFT) calculations using hybrid exchange-correlation functionals have been shown to provide an accurate description of the electronic structures of nanosystems. However, such calculations are often limited to small system sizes due to the high computational cost associated with the construction and application of the Hartree-Fock (HF) exchange operator. Here, we demonstrate that the recently developed adaptively compressed exchange (ACE) operator formulation [J. Chem. Theory Comput. 2016, 12, 2242-2249] can enable hybrid functional DFT calculations for nanosystems with thousands of atoms. The cost of constructing the ACE operator is the same as that of applying the exchange operator to the occupied orbitals once, while the cost of applying the Hamiltonian operator with a hybrid functional (after construction of the ACE operator) is only marginally higher than that associated with applying a Hamiltonian constructed from local and semilocal exchange-correlation functionals. Therefore, this new development significantly lowers the computational barrier for using hybrid functionals in large-scale DFT calculations. We demonstrate that a parallel planewave implementation of this method can be used to compute the ground-state electronic structure of a 1000-atom bulk silicon system in less than 30 wall clock minutes and that this method scales beyond 8000 computational cores for a bulk silicon system containing about 4000 atoms. The efficiency of the present methodology in treating large systems enables us to investigate adsorption properties of water molecules on Ag-supported two-dimensional silicene. Our computational results show that water monomer, dimer, and trimer configurations exhibit distinct adsorption behaviors on silicene. In particular, the presence of additional water molecules in the dimer and trimer configurations induces a transition from physisorption to chemisorption, followed by dissociation on Ag-supported silicene. This is caused by the enhanced effect of hydrogen bonds on charge transfer and proton transfer processes. Lastly, such a hydrogen bond autocatalytic effect is expected to have broad applications for silicene as an efficient surface catalyst for oxygen reduction reactions and water dissociation.

36 MATERIALS SCIENCE↗

Investigation of optoelectronic properties of cubic perovskite LaGaO{sub 3}

The structural, electronic, bonding and optical properties of cubic perovskite LaGaO{sub 3} have been calculated using the full-potential linearized augmented plane wave (FP-LAPW) method in the density functional theory (DFT) as embodied in WIEN2k code. The modified Becke-Johnson (mBJ) potential is applied for the calculation of electronic and optical properties. The calculated lattice constant is in good agreement with the experimental result. The predicted band structure shows an indirect (M-X) band gap of 4.22 eV. The bonding in the material is of mixed covalent and ionic nature. Optical properties like dielectric function, refractive index, reflectivity, conductivity and absorption coefficient are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

QM/MM method for metal - organic interfaces

Organic/inorganic interfaces are ubiquitous in organic electronics and energy materials. These interfaces often have defects, such as grain and domain boundaries, which influence their electronic properties. Fundamental studies of such extended defects, understanding of their effect on the performance of the interfaces in practical applications, and, ultimately, design of new interfaces requires theoretical modeling of their structure and properties. However, due to the large size of these systems, their accurate quantum mechanical description is often unfeasible. Here we present a QM/MM method for modeling metal/organic interfaces, which incorporates contributions from long-range electron correlation, characteristic to metals and non-bonded interactions in organic systems. This method can be used to study structurally irregular systems. We apply the method to model finite size domains of self-assembled monolayers on gold (111) surface and discuss the influence of boundary effects on the electrostatic and electronic properties of these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.