SEARCH · Search NASA

Results for “engine simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Validation of finite element analysis strategy to investigate acoustic levitation in a two-axis acoustic levitator

A two-axis acoustic levitator can be used to generate a standing pressure wave capable of levitating solid and liquid particles at appropriate input conditions. This work proposes a simulation framework to investigate the two-axis levitation particle stability using a commercial, computational fluid dynamics software based on the harmonic solution to the acoustic wave equation. The simulation produced predictions of the standing wave that include a strong "+" shaped pattern of nodes and anti-nodes that are aligned with the levitator axes. To verify the simulation, a levitator was built and used to generate the standing wave. The field was probed with a microphone and a motorized-scanning system. After scaling the simulated pressure to the measured pressure, the magnitudes of the sound pressure level at corresponding high-pressure locations were different by no more than 5%. This is the first time a measurement of a two-axis levitator standing pressure wave has been presented and shown to verify simulations. Furthermore, as an additional verification, the authors consulted high speed camera measurements of a reference-levitator transducer, which was found to have a maximum peak-to-peak displacement of 50 +/- 5 mu m. The reference-levitator is known to levitate water at 160 dB. The system for this work was simulated to match the operation of the reference-levitator so that it produced sound pressure levels of 160 dB. This pressure was achieved when the transducer maximum peak-to-peak displacement was 50.8 mu m. The agreement between the two levitators' displacements provides good justification that the modeling approach presented here produces reliable results.

2 axis levitator↗

DOE OSTI2018

A Composition-Based Approach for Predicting Hanford Tank Waste Liquid Viscosity

Liquid viscosity is an important Hanford waste physical property that governs, in part, the performance of key Hanford flowsheet unit operations and processes, including waste filtration, ion exchange, pumping and transport, and mixing. Evaluation and optimization of these processes rely on liquid viscosity correlations subject to substantial error (at least ±60%) that can lead to overly conservative, and sometimes physically unachievable, limits for validation and operation of these unit operations. The current liquid viscosity correlations used for the Hanford flowsheet attempt to capture the effects of specific waste chemistry (namely, the speciation of various salts) on liquid viscosity using liquid density alone. It is postulated that the ±60% or greater error associated with these “density-based” liquid viscosity predictions is driven in part by the inability of waste density to capture the full impact of waste chemistry on liquid viscosity, and that improved prediction accuracy could be achieved by implementing a composition-based approach to evaluating liquid viscosity for Hanford wastes. Recent publications, namely those of Lencka et al. (1998), Hu (2004), and Laliberté (2007a), provide correlations and comprehensive, consolidated databases of single-salt solution viscosity that enable composition-based predictions for Hanford-type liquids (i.e., concentrated multi-component aqueous electrolyte solutions). In the current study, the viscosities of Hanford wastes and waste simulants were predicted using a composition-based model developed by Laliberté (2007a) (hereafter referred to as the “Laliberté viscosity model”) to evaluate its accuracy relative to the current density-based models used to predict waste viscosity for engineering applications at the Hanford Site. A viscosity database that captured the composition and viscosity of wastes and waste simulants was developed to support this evaluation. To facilitate application of the Laliberté viscosity model, waste and waste simulant compositions were converted to an equivalent salt recipe composed of salts with known viscosity coefficients using a number of simplifying assumptions that have the potential to impact the fidelity of the model prediction. Despite these simplifications, the Laliberté viscosity model was able to predict viscosity more accurately than the density-based correlations currently available for Hanford flowsheet use, such as that proposed in RPP-RPT- 51652. The use of composition-based viscosity models, like that proposed by Laliberté (2007a), shows promise for leading to improved prediction of liquid waste viscosity. As implemented in this study, application of the Laliberté viscosity model could lead to a decrease in the uncertainty associated with liquid viscosity prediction by as much as a factor of two, allowing for reduction in unit operation design conservatism and for the more realistic selection of test simulants for flowsheet process evaluation and optimization, all of which could potentially reduce flowsheet design margins, lower costs and reduce duration of the Hanford mission, and reduce Hanford flowsheet risks.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2019

Assessment of Enthalpy-Based Conditional Moment Closure Models in Predicting Ignition of Lean and Stoichiometric PRF-Air Mixtures with Temperature Inhomogeneity

Accurate prediction of the ignition delay in turbulent flows is important in developing advanced combustion technology for internal combustion engines. Enthalpy-based conditional moment closure (CMC) models are assessed with 2-D direct numerical simulation (DNS) data for ignition of homogeneous PRF-air mixtures with temperature inhomogeneity in homogeneous isotropic turbulence. The sensible-enthalpy-based CMC model is compared with the total-enthalpy-based formulation, with the focus being placed on assessing the capability of the CMC models in predicting ignition processes under different engine conditions. A priori analysis shows that the total-enthalpy-based CMC gives good predictions of the heat release rates in the lean mixtures when the temperature inhomogeneity level is low, but leads to significant overprediction under the stoichiometric condition regardless of the thermal stratification levels. On the other hand, the sensible enthalpy formulation performs well for all conditions considered in this study due to the suppressed conditional temperature fluctuations. A mapping method to model conditional scalar dissipation rates and probability density function of sensible enthalpy is also assessed.

Wang, Wei↗

DOE OSTI2024

LES and RANS Spray Combustion Analysis of OME 3-5 and n-Dodecane

Clean-burning oxygenated and synthetic fuels derived from renewable power, so-called e-fuels, are a promising pathway to decarbonize compression–ignition engines. Polyoxymethylene dimethyl ethers (PODEs or OMEs) are one candidate of such fuels with good prospects. Their lack of carbon-to-carbon bonds and high concentration of chemically bound oxygen effectively negate the emergence of polycyclic aromatic hydrocarbons (PAHs) and even their precursors like acetylene (C 2 H 2 ), enabling soot-free combustion without the soot-NO x trade-off common for diesel engines. The differences in the spray combustion process for OMEs and diesel-like reference fuels like n-dodecane and their potential implications on engine applications include discrepancies in the observed ignition delay, the stabilized flame lift-off location, and significant deviations in high-temperature flame morphology. For CFD simulations, the accurate modeling and prediction of these differences between OMEs and n-dodecane proved challenging. This study investigates the spray combustion process of an OME 3 − 5 mixture and n-dodecane with advanced optical diagnostics, Reynolds-Averaged Navier–Stokes (RANS), and Large-Eddy Simulations (LESs) within a constant-volume vessel. Cool-flame and high-temperature combustion were measured simultaneously via high-speed (50 kHz) imaging with formaldehyde (CH 2 O) planar laser-induced fluorescence (PLIF) representing the former and line-of-sight OH* chemiluminescence the latter. Both RANS and LES simulations accurately describe the cool-flame development process with the formation of CH 2 O. However, CH 2 O consumption and the onset of high-temperature reactions, signaled by the rise of OH* levels, show significant deviations between RANS, LES, and experiments as well as between n-dodecane and OME. A focus is set on the quality of the simulated results compared to the experimentally observed spatial distribution of OH*, especially in OME fuel-rich regions. The influence of the turbulence modeling is investigated for the two distinct ambient temperatures of 900 K and 1200 K within the Engine Combustion Network Spray A setup. The capabilities and limitations of the RANS simulations are demonstrated with the initial cool-flame propagation and periodic oscillations of CH 2 O formation/consumption during the quasi-steady combustion period captured by the LES.

CFD↗

DOE OSTI2015

Design, development and utilization of the new LLNL inherently safe subcritical assembly (ISSA) - 14510

Following de-inventory of high security materials from LLNL, a new subcritical assembly for training and detector development purposes was designed and built. This paper describes the safety features inherent in the assembly design and accomplishments related to development, simulation and utilization of the new assembly. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2019

A hybrid discrete bubble-lattice Boltzmann–discrete element model for gas-charged sediments

In this paper, we present a hybrid discrete bubble-lattice Boltzmann–discrete element modelling framework for simulating gas-charged sediments, especially in the seabed. A discrete bubble model proposed in chemical engineering is adapted in the coupled discrete element/lattice Boltzmann method to model the migration of gas bubbles in saturated sediments involving interactions between gas bubbles and fluid/solid phases. Surface tension is introduced into the discrete bubble model in this work, so that it can handle the complex gas–fluid–solid interface. The lattice Boltzmann and discrete element methods are, respectively, employed to simulate fluid flows and mechanical behaviours of sediments. A velocity interpolation-based immerse boundary method is utilised to resolve the coupling between the fluid flow and the solid/gas phase. The proposed technique is preliminarily validated using simulations of bubble migration in fluids, which is followed by high-resolution investigations of the transport of a gas bubble in seabed sediments. Lastly, it is demonstrated that this hybrid method can reproduce, to a certain degree, the characters of bubbles moving in seabed sediment tests.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Heterogeneous solute segregation suppresses strain localization in nanocrystalline Ag-Ni alloys

Solute segregation to individual grain boundaries is used by design to produce strong and stable nanocrystalline metallic alloys. Grain-boundary segregation, however, is known to cause adverse embrittlement effects from a strain-localization failure mechanism that imposes significant material limitations for structural applications. Here, using atomistic simulations, it is discovered that heterogeneous Ni segregation in nanocrystalline Ni-mixed Ag alloys dramatically shuts down localized shear bands during plastic deformation, while simultaneously increasing the tensile strength. Nanocrystalline Cu-mixed Ag metals are predicted to exhibit standard homogeneous Cu segregation and a tensile strength that saturates above a solute concentration of 8 at.% due to glass-like shear localization induced by grain boundaries. By contrast, it is found that heterogeneous Ni segregation in nanocrystalline Ag-Ni alloys forms solute-rich clusters along interfaces leading to strain delocalization at high strain and continuous strengthening at high solute concentrations up to 15 at.%. As a result, this study reveals the importance of heterogeneous versus homogeneous segregation behaviors on strain localization and points to a fundamentally new strategy to design failure-resistant nanostructured materials through grain boundary segregation engineering.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Inverse design of pore wall chemistry and topology through active learning of surface group interactions

Design of next-generation membranes requires a nanoscopic understanding of the effect of biologically inspired heterogeneous surface chemistries and topologies (roughness) on local water and solute behavior. In particular, the rejection of small, neutral solutes, such as boric acid, poses a heretofore unsolved challenge. In prior work, a computational inverse design technique using an evolutionary optimization successfully uncovered new surface design strategies for optimized transport of water over solutes in smooth, model pores consisting of two surface chemistries. However, extending such an approach to more complex (and realistic) scenarios involving many surface chemistries as well as surface roughness is challenging due to the expanded design space. In this work, we develop a new approach that uses active learning to optimize in a reduced feature space of surface group interactions, finding parameters that lead to their assembly into ordered, optimal patterns. This approach rapidly identifies novel surface functionalizations that maximize the difference in water and boric acid transport through the nanopore. Moreover, we find that the roughness of the nanopore wall, independent of its chemistry, can be leveraged to enhance transport selectivity: oscillations in the pore wall diameter optimally inhibit boric acid transport by creating energetic wells from which the solute must escape to transport down the pore. Furthermore, this proof-of-concept demonstrates the potential for active learning strategies, in concert with molecular simulations, to rapidly navigate complex design spaces of aqueous interfaces and is promising as a tool for engineering water-mediated surface interactions for a broad range of applications.

36 MATERIALS SCIENCE↗

DOE OSTI2017

CFD Simulation of Bubble Growing Under a Downward Facing Surface

The heat removing of downward facing surface is an important issue in many areas, including nuclear safety, solar storage system and electronic cooling devices. Therefore, the characteristic and heat removal capability of downward facing boiling were investigated by many experiments in recent years. Among these studies, the thickness of bubble is considered as an important parameter. The increasing of bubble thickness will increase the thermal resistance of cooling process and reduce the cooling ability. In order to focus on the dynamics of bubble thickness, Das et al. injected air into sodium dodecyl sulphate (SDS) solution through a nozzle under the horizontal downward facing surface. The bubble will be formed by the air injection and kept under the horizontal plate. The diameter of nozzle, horizontal plate and SDS solution tank are 2 mm, 20 mm and 30 mm, respectively. The growing processing and the stable thickness of the bubble were recorded in the experiment. Basing on the conditions of Das's experiment, the appropriate computational fluid dynamics (CFD) simulation was conducted. The growing process and the stable thickness of bubble under difference contact angle are predicted by CFD in this study.

42 ENGINEERING↗

DOE OSTI2019

FAST.Farm Response to Varying Wind Inflow and Discretization

FAST.Farm is a newly developed multiphysics, midfidelity engineering tool that can be used to predict turbine power and structural loads of wind turbines in a wind farm. Previous studies have shown the similarities and differences between FAST.Farm and large-eddy simulations (LES) using the same LES-precursor-generated ambient wind inflow. The ability to generate ambient wind inflow using a synthetic turbulence engineering model (e.g., TurbSim or the Mann model) has recently been integrated into FAST.Farm to potentially enable more computationally efficient usage of the tool. This work aims to: 1) compare FAST.Farm simulations using LES-generated inflow to those using synthetically generated inflow from TurbSim, and 2) establish guidelines by which TurbSim-generated inflow should be generated for wind farm analysis. It was found that properly setting spatial coherence parameters for the transverse wind velocity components is necessary to accurately predict wake meandering. It is shown that TurbSim-generated inflow can be used in FAST.Farm to accurately predict thrust, power, speed, and torque for waked and unwaked turbines; wake meandering behavior across different atmospheric conditions; and averaged wake-deficit advection and evolution effects.

17 WIND ENERGY↗

DOE OSTI2019

FAST.Farm Response to Varying Wind Inflow Techniques: Preprint

17 WIND ENERGY↗

DOE OSTI2026

How Frequent Will the Rarest Daily Rainfall Records of Hurricane Ida’s Remnants Be in the Future?

Abstract Gaining continued insights into the impact of global warming on the occurrence of hurricane-associated intense record downpours is essential for building climate resilient communities. This study investigates projected future changes in extreme rainfall over the Northeast United States, as represented by extreme daily amounts during Hurricane Ida in 2021. We used historical control simulations of Weather Research and Forecasting (WRF) Model generated from 40 years of weather events (1980–2014, 12 km) forced by the fifth generation European Centre for Medium-Range Weather Forecasts atmospheric reanalysis. These simulations are thermodynamically modified (2060–2100) via an imposed warming for the high-emission scenario of shared socioeconomic pathway (SSP585) from a range of general circulation models. Ground observations from the Global Historical Climatology Network (1950–2014) and WRF simulations (historical, 1980–2014, and future, 2060–2100) are integrated into a nonstationary generalized extreme value (GEV) framework to assess the frequency of Ida’s heaviest daily rain rates under the SSP585 scenario. Results show that Ida’s daily maximum rainfall recorded at different observation locations was higher than the single highest September daily maximum observed (1950–2014) for 5 out of 17 stations (∼30% of the stations). Ida-like extreme daily rain rates are projected to be, on average, more than 2 times more likely to occur at the end of the century in the simulations (with some regions as high as 5 times). This work demonstrates that integrating a high-resolution atmospheric model’s present-day and thermodynamically modified future simulations along with ground observations, within a nonstationary statistical framework, is crucial for understanding changing characteristics of extreme weather events. Significance Statement Daily scale extreme precipitation is expected to become more frequent and severe, as evidenced by observations and model simulations. While it is important to investigate how these intensifying heavy rainfall events affect current engineering standards, fewer studies have contextualized how warming impacts the most extreme rainfall from a single storm event relative to historical heavy downpours. In this study, we focused on the daily extreme rainfall associated with the extratropical transition of Hurricane Ida (2021), particularly over the northeastern United States—some of which exceeded the commonly used hydrologic design criteria for a 100-yr storm. Using a high-resolution atmospheric model simulation, we investigated how continued warming may influence the frequency of such daily rain rates. Under a high-emission scenario, these events are projected to become up to 5 times more likely at the end of the twenty-first century.

Dollan, Ishrat J↗

DOE OSTI2015

Cavitation inception by the backscattering of pressure waves from a bubble interface

The secondary cavitation that occurs by the backscattering of focused ultrasound from a primary cavitation bubble caused by the negative pressure part of the ultrasound (Maxwell, et al., 2011) might be useful for the energy exchange due to bubble oscillations in High Intensity Focused Ultrasound (HIFU). The present study is concerned with the cavitation inception by the backscattering of ultrasound from a bubble. In the present experiment, a laser-induced bubble which is generated by a pulsed focused laser beam with high intensity is utilized as a primary cavitation bubble. After generating the bubble, focused ultrasound is emitted to the bubble. The acoustic field and the bubble motion are observed with a high-speed video camera. It is confirmed that the secondary cavitation bubble clouds are generated by the backscattering from the laser-induced bubble. The growth of cavitation bubble clouds is analyzed with the image processing method. The experimental results show that the height and width of the bubble clouds grow in stepwise during their evolution. The direct numerical simulations are also conducted for the backscattering of incident pressure waves from a bubble in order to evaluate a pressure field near the bubble. It is shown that the ratio of a bubble collapse time t{sub 0} to a characteristic time of wave propagation t{sub S}, η = t{sub 0}/t{sub s}, is an important determinant for generating negative pressure region by backscattering. The minimum pressure location by the backscattering in simulations is in good agreement with the experiment.

42 ENGINEERING↗

DOE OSTI2017

Enhancing the physical modeling capability of open-source MFIX-DEM software for handling particle size polydispersity: Implementation and validation

Multiphase flows are ubiquitous in many industrial processes. The inherent coupling of different phases poses many unique challenges in predicting and effectively controlling these processes. Hence, computational modeling and simulation offers a viable approach to overcome these challenges. Here in this study, we present recent development efforts for enhancing the physical modeling capabilities of an open-source computational modeling tool for real life industrial multiphase processes by enabling particle-size polydispersity and demonstrating with an associated validation study. The proposed implementation was performed in MFIX open-source framework due to its unique feature of tightly integrated computational fluid dynamics and discrete element method solvers for simulating coupled continuum fluid and granular flows. We have implemented the polydispersity feature in a minimally invasive way and provided means to allow easy specification of an arbitrary particle size distribution function, which also enables the user to easily handle an arbitrary number of solid phases, each possessing a distinct arbitrary particle-size distribution. To establish the credibility of improvements, we have carried out a preliminary verification and validation (V&V) study for the polydispersity feature by employing a hopper bin discharge problem, which is frequently encountered in industrial applications. Specifically, two types of micro-glass beads with distinct size distributions are used to fill the hopper in two possible packing arrangements, i.e., well-mixed and layered configurations, with varying mass (particle number) ratios. The experimentally obtained discharge dynamics (e.g., normalized discharge mass fraction for one of the phases versus the overall discharge mass fraction) for different systems is found to be in excellent agreement with the corresponding simulation results.

42 ENGINEERING↗

DOE OSTI2022

Black Hole to Photosphere: 3D GRMHD Simulations of Collapsars Reveal Wobbling and Hybrid Composition Jets

Long-duration γ-ray bursts (GRBs) accompany the collapse of massive stars and carry information about the central engine. However, no 3D models have been able to follow these jets from their birth via black hole (BH) to the photosphere. We present the first such 3D general-relativity magnetohydrodynamic simulations, which span over six orders of magnitude in space and time. The collapsing stellar envelope forms an accretion disk, which drags inwardly the magnetic flux that accumulates around the BH, becomes dynamically important, and launches bipolar jets. The jets reach the photosphere at ~10 12 cm with an opening angle θ j ~ 6° and a Lorentz factor Γ j ≲ 30, unbinding ≳90% of the star. We find that (i) the disk–jet system spontaneously develops misalignment relative to the BH rotational axis. As a result, the jet wobbles with an angle θ t ~ 12°, which can naturally explain quiescent times in GRB lightcurves. The effective opening angle for detection θ j + θ t suggests that the intrinsic GRB rate is lower by an order of magnitude than standard estimates. This suggests that successful GRBs are rarer than currently thought and emerge in only ~0.1% of supernovae Ib/c, implying that jets are either not launched or choked inside most supernova Ib/c progenitors. (ii) The magnetic energy in the jet decreases due to mixing with the star, resulting in jets with a hybrid composition of magnetic and thermal components at the photosphere, where ~10% of the gas maintains magnetization σ ≳ 0.1. This indicates that both a photospheric component and reconnection may play a role in the prompt emission.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Electrokinetic comparison of CaF 2 and AgCl from a MDS perspective

CaF 2 has limited electrokinetic sensitivity to fluoride ions in solution and the positive CaF 2 surface charge is not reversed at high fluoride ion concentration. Similar insensitivity of surface charge to high fluoride ion concentration has been observed for other alkali and alkaline earth fluoride salts. On the contrary, chloride ions act as potential determining ions for AgCl and reverse the surface charge, as expected. FTIR-IRS results indicate that the AgCl/water interface has a water structure-breaking tendency, whereas the CaF 2 /water interface has a structure-making tendency. Here, it is speculated that the strong hydrogen bonding between fluoride ions and water prevents the accommodation of excess fluoride ions at surface lattice sites of fluorite, and therefore explains the low sensitivity of the fluorite surface charge sign and magnitude to fluoride ion concentration. However, this speculation has not been examined at the molecular level and is evaluated by molecular dynamics simulations (MDS) in the research presented in this paper. Higher hydrogen bond density at the CaF 2 mineral/water interface confirms that the water structure has stronger hydrogen bonding at both the CaF 2 mineral surface and with the F - ion in solution. In this way, the interaction of the F - ion with the CaF 2 surface is inhibited.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Current and Future Performance of the CMS Simulation

The CMS full simulation using Geant4 has delivered billions of simulated events for analysis during Runs 1 and 2 of the LHC. However, the HL-LHC dataset will be an order of magnitude larger, with a similar increase in occupancy per event. In addition, the upgraded CMS detector will be considerably more complex, with an extended silicon tracker and a high granularity calorimeter in the endcap region. Increases in conventional computing resources are subject to both technological and budgetary limitations, so novel approaches are needed to improve software efficiency and to take advantage of new architectures and heterogeneous resources. Several projects are in development to address these needs, including the vectorized geometry library Vec-Geom and the GeantV transport engine, which uses track-level parallelization. The current computing performance of the CMS simulation will be presented as a baseline, along with an overview of the various optimizations already available for Geant4. Finally, the progress and outlook for integrating VecGeom and GeantV in the CMS software framework will be discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2019

Simulating the Fracture of Notched Mortar Beams through Extended Finite-Element Method and Peridynamics

This paper simulates fracture in notched mortar beams under three-point bending using extended finite element method (XFEM) and peridynamics. A three-phase microstructure (i.e., cement paste, aggregates, and paste-aggregate interface) is used for constitutive modeling of the mortar to obtain the elastic properties for simulation. In the XFEM approach, the simulated homogenized elastic modulus is used along with the total fracture energy of the cement mortar in a damage model to predict the fracture response of the mortar including crack propagation and its fracture parameters (Mode I stress intensity factor, K IC and critical crack tip opening displacement, CTOD C ). The damage model incorporates a maximum principal stress-based damage initiation criteria and a traction-separation law for damage evolution. In the peridynamics approach, a bond-based model involving a prototype microelastic brittle (PMB) material model is used. The elastic properties and fracture energy release rates are used as inputs in the PMB model, along with the choice of peridynamic horizon size. Comparison with experimental fracture properties ( K IC , CTOD C ) as well as crack propagation paths from digital image correlation show that both the approaches yield satisfactory results, particularly for K IC and crack extension. Furthermore, both these methods can be adopted for fracture simulation of cement-based materials.

42 ENGINEERING↗

Refine your search to explore more results.