Search NASA⌕ Search

SEARCH · Search NASA

Results for “force method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Two sides of a fault: Grain-scale analysis of pore pressure control on fault slip

Pore fluid pressure in a fault zone can be altered by natural processes (e.g., mineral dehydration and thermal pressurization) and industrial operations involving subsurface fluid injection and extraction for the development of energy and water resources. However, the effect of pore pressure change on the stability and slip motion of a preexisting geologic fault remains poorly understood; yet, it is critical for the assessment of seismic hazard. In this study, we develop a micromechanical model to investigate the effect of pore pressure on fault slip behavior. The model couples fluid flow on the network of pores with mechanical deformation of the skeleton of solid grains. Pore fluid exerts pressure force onto the grains, the motion of which is solved using the discrete element method. We conceptualize the fault zone as a gouge layer sandwiched between two blocks. We study fault stability in the presence of a pressure discontinuity across the gouge layer and compare it with the case of continuous (homogeneous) pore pressure.We focus on the onset of shear failure in the gouge layer and reproduce conditions where the failure plane is parallel to the fault. We show that when the pressure is discontinuous across the fault, the onset of slip occurs on the side with the higher pore pressure, and that this onset is controlled by the maximum pressure on both sides of the fault. In conclusion, the results shed new light on the use of the effective stress principle and the Coulomb failure criterion in evaluating the stability of a complex fault zone.

58 GEOSCIENCES↗

Efficient Computation of Casimir Interactions between Arbitrary 3D Objects

We introduce an efficient technique for computing Casimir energies and forces between objects of arbitrarily complex 3D geometries. In contrast to other recently developed methods, our technique easily handles nonspheroidal, nonaxisymmetric objects, and objects with sharp corners. Using our new technique, we obtain the first predictions of Casimir interactions in a number of experimentally relevant geometries, including crossed cylinders and tetrahedral nanoparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Outcomes and Insights From Simplified Analytic Trajectory Optimization for a Tethered Underwater Kite

This letter formulates and solves a periodic trajectory optimization problem for a tethered underwater kite. The goal is to maximize the average mechanical power harvested by the kite. The type of kite considered in this letter extracts electricity from ocean currents by moving cross-current as its reel away from its base station, and consumes electricity to reel back. The problem of optimizing this kite’s trajectory is challenging due to the high dimensionality and nonlinearity of its dynamics. To tackle this challenge, the literature often separates the problem into two subproblems focusing on optimizing the cross-current and the reel-in/reel-out components of the trajectory, respectively, which may be sub-optimal. In contrast, this letter solves for the combined cross-current and reel-in/reel-out trajectory by linearizing the dynamics of the kite around a zero-power reference equilibrium trajectory in spherical coordinates. This allows the trajectory optimization problem to be solved analytically for simple sinusoidal input perturbations from equilibrium. Here we use linear quadratic regulation to enable the nonlinear kite model to track the optimized trajectory. The result is a computationally efficient approach that achieves an attractive Loyd factor of 19.9%, while providing important insights into the nature of the optimal trajectory.

42 ENGINEERING↗

Structural Analysis of a Serpentine Superconducting Magnet for the Interaction Region of the Electron Ion Collider

The electron ion collider (EIC) is under design to collide the high energy and highly polarized hadron with electron beams with luminosities up to 10 34 cm −2 s −1 . The superconducting magnet designs at the interaction region (IR) are quite challenging due to the close proximity of the hadron and electron beams. Several serpentine types of superconducting magnets have been designed due to the space restrictions at the IR. Here, to validate the designs in terms of the mechanical strength, structural integrity, as well as the allowed deformations, a detailed structural mechanical analysis for a 12-layer superconducting quadrupole serpentine magnet (Q1BpR) in the rear side hadron beams has been carried out using the finite element method (FEM) considering the pretension stress, shrinking due to cool down, and the electromagnetic force on the conductors. Anisotropy material properties and individual roving tension have been considered. The electro-magnetic (EM) simulations were performed using COMSOL, confirmed with RAT, the structural mechanical analysis were performed using COMSOL by considering the contact elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Methods for Analysis and Quantification of Power System Resilience

This paper summarizes the report prepared by an IEEE PES Task Force. Resilience is a fairly new technical concept for power systems, and it is important to precisely delineate this concept for actual applications. As a critical infrastructure, power systems have to be prepared to survive rare but extreme incidents (natural catastrophes, extreme weather events, physical/cyber-attacks, equipment failure cascades, etc.) to guarantee power supply to the electricity-dependent economy and society. Thus, resilience needs to be integrated into planning and operational assessment to design and operate adequately resilient power systems. Quantification of resilience as a key performance indicator is important, together with costs and reliability. Quantification can analyze existing power systems and identify resilience improvements in future power systems. Given that a 100% resilient system is not economic (or even technically achievable), the degree of resilience should be transparent and comprehensible. Several gaps are identified to indicate further needs for research and development.

42 ENGINEERING↗

Nonlinear vortex dynamo in a rotating stratified moist atmosphere

We have found a new type of large-scale instability in a rotating stratified moist atmosphere with small-scale turbulence. The turbulence is excited by an external small-scale force with a low Reynolds number. We have constructed the theory based on the method of multiscale asymptotic expansions. The nonlinear equations for large-scale motion have been derived in the third order of the perturbation theory. We have investigated the linear instability and stationary nonlinear regimes. Solutions in the form of localized vortex structures or kinks of a new type have been obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of polycrystalline-silicon films with hemispherical grains for capacitor structures with increased capacitance

The effect of formation conditions on the morphology of silicon films with hemispherical grains (HSG-Si) obtained by the method of low-pressure chemical vapor deposition (LPCVD) is investigated by atomic-force microscopy. The formation conditions for HSG-Si films with a large surface area are found. The obtained HSG-Si films make it possible to fabricate capacitor structures, the electric capacitance of which is twice as large in comparison to that of capacitors with “smooth” electrodes from polycrystalline silicon.

36 MATERIALS SCIENCE↗

Improvements in Global Climate Model Microphysics Using a Consistent Representation of Ice Particle Properties

This paper describes a new approach for representing ice microphysics in climate models. In contrast with most previous schemes, this approach does not include separate categories for cloud and precipitating ice and instead uses a single two-moment category to represent all solid hydrometeors. Thus, there is no need for an ice “autoconversion” size threshold parameter, which has a critical impact on simulated climate in the Community Atmosphere Model (CAM5) yet is poorly constrained by theory or observations. Further, in the new treatment, all ice microphysical processes and parameters, including ice effective radius and mean fall speed, are formulated self-consistently and flexibly based on empirical ice particle mass–size and projected area–size relationships. This means that the scheme can represent the physical coupling between bulk particle density, mean fall speed, and effective radius, which is not possible in current schemes. Two different methods for specifying these relationships based on observations are proposed. The new scheme is tested in global simulations using CAM5. Differences in simulations using the two methods for specifying the mass– and projected area–size relationships, particularly the cloud radiative forcing, are attributable mainly to the effects on mean ice particle fall speed, impacting sedimentation and ice water path. With some tuning of parameters involved in calculating homogeneous freezing it produces a similar climate compared to the simulations using the original CAM5 microphysics. Thus, it can produce a comparable climate while improving the physical basis and self-consistency of ice particle properties and parameters.

54 ENVIRONMENTAL SCIENCES↗

The Alliance of Genome Resources: Building a Modern Data Ecosystem for Model Organism Databases

Model organisms are essential experimental platforms for discovering gene functions, defining protein and genetic networks, uncovering functional consequences of human genome variation, and for modeling human disease. For decades, researchers who use model organisms have relied on Model Organism Databases (MODs) and the Gene Ontology Consortium (GOC) for expertly curated annotations, and for access to integrated genomic and biological information obtained from the scientific literature and public data archives. Through the development and enforcement of data and semantic standards, these genome resources provide rapid access to the collected knowledge of model organisms in human readable and computation-ready formats that would otherwise require countless hours for individual researchers to assemble on their own. Since their inception, the MODs for the predominant biomedical model organisms [Mus sp (laboratory mouse), Saccharomyces cerevisiae, Drosophila melanogaster, Caenorhabditis elegans, Danio rerio, and Rattus norvegicus] along with the GOC have operated as a network of independent, highly collaborative genome resources. In 2016, these six MODs and the GOC joined forces as the Alliance of Genome Resources (the Alliance). By implementing shared programmatic access methods and data-specific web pages with a unified "look and feel," the Alliance is tackling barriers that have limited the ability of researchers to easily compare common data types and annotations across model organisms. To adapt to the rapidly changing landscape for evaluating and funding core data resources, the Alliance is building a modern, extensible, and operationally efficient "knowledge commons" for model organisms using shared, modular infrastructure.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of ASCE 4-16 and AISC 43-18 (Draft) for use in the Risk-Informed Performance-Based Seismic Design of Nuclear Power Plant Structures, Systems, and Components

This report describes the assessment of ASCE Standards 4-16 and 43-18 (Draft) for use in the Risk-Informed Performance-Based (RIPB) seismic design of structures, systems, and components (SSCs) at nuclear power plants. This work was performed for the U.S. Nuclear Regulatory Commission (NRC) Office of Regulatory Research (RES), to support potential endorsement of these industry standards for the design of nuclear power plants based on the RIPB approach. Currently, the NRC endorses a deterministic design approach for demonstrating the design adequacy of SSCs based on the Standard Review Plan (NUREG-0800) and NRC Regulatory Guides. In the RIPB approach, the design criteria are developed to achieve a target performance goal, which is defined by the annual frequency of occurrence of the design basis earthquake (i.e., Seismic Design Category) and the acceptable level of structural performance (i.e., Limit State) for the SSCs. ASCE 4-16 provides methods for performing a seismic analysis of structures to obtain the seismic response of these structures (e.g., building displacements, accelerations, in-structure response spectra) which are used in the design of the SSCs. It also provides methods for performing seismic analysis of SSCs to determine the seismic demands (e.g. member forces and displacements) needed to design individual SSCs. ASCE 43-18 (Draft) provides the criteria for the seismic design of SSCs using the seismic demands developed in ASCE 4-16. The use of ASCE Standard 43-18 (Draft), along with ASCE 4-16, provides the criteria for the seismic design of the SSCs. ASCE 43-18 (DRAFT) relies on other consensus codes and standards such as ACI 349 for reinforced concrete, AISC/N690 for steel structures, ASME Section III for pressure-retaining mechanical components and Containments, and IEEE-344 for Class 1E equipment. The goal of this technical review was to assess the adequacy of the provisions in these standards for use by the NRC in developing regulatory guidance for design of SSCs in nuclear power plants, based on the RIPB approach. The research reported herein describes the basis for acceptance of the new standards and identifies areas where additional staff guidance is needed for the seismic design of SSCs at nuclear power plants. This technical review has determined that ASCE 4-16 and ASCE 43-18 (Draft) provide an appropriate framework for the seismic design of SSCs at nuclear power plants using a Risk-Informed Performance-Based approach. However, some of the criteria therein warrant exceptions, qualifications, and/or clarifications.

42 ENGINEERING↗

Technical Note: Description of Surface Tension as Implemented In LDEC-SPH Module

This brief report describes recent results obtained with the LDEC SPH module including the effects of surface tension. LDEC implements a quasi-incompressible approximation to the Navier-Stokes equations (Morris et al., 1997). The author previously developed an approach to surface tension with SPH that calculated the curvature directly by taking the divergence of surface normals obtained from the gradient of a color function (Morris, 2000). In contrast, the implementation demonstrated here is based upon that developed by Tartakovsky and Meakin (2005) who introduced an additional force between the particles which results in the effect of surface tension. A similar method was also employed by Becker and Teschner (2007) who replaced the cosine based functional form developed by Tartakovsky and Meakin (2005) with a form based upon the SPH kernel function itself. These formulations do not accommodate a specified surface tension value, rather the effect of surface tension is an emergent feature and thus the techniques must be calibrated. Figure 1 shows results of an initial simulation performed with the LDEC-SPH module in 2-D using the approach developed by Tartakovsky and Meakin (2005). A square volume of fluid is observed to transition to a circle due to the effects of surface tension. Due to being critically damped, this simulation proceeds directly to the circular stable state. Future work will include following the same validation steps that Tartakovsky and Meakin (2005) used. That is, performing numerical experiments to determine the relationship between the parameter of the surface tension formulation and an equivalent effective surface tension value. We will also evaluate the alternative functional form promoted by Becker and Teschner (2007) to see if it provides improved robustness as claimed by those authors.

54 ENVIRONMENTAL SCIENCES↗

Supra-bubble regime for laser acceleration of coldelectron beams in tenuous plasma

Relativistic electrons can be accelerated by an ultraintense laser pulse in the "supra-bubble" regime, that is, in the blow-out regime ahead of the plasma bubble (as opposed to the conventional method, when particles remain inside the bubble). The acceleration is caused by the ponderomotive force of the pulse, via the so-called snow-plow mechanism. The maximum energy gain, Δγ ~ γg a, is attained when the particle Lorentz factor γ is initially about γg/a, where γg is the pulse group speed Lorentz factor, and a is the laser parameter, proportional to the laser field amplitude. The scheme operates at a ≤ γg, yielding Δγ of up to that via wakefield acceleration for the same plasma and laser parameters, Δγ ~ γ2g. The interaction length is shorter than that for the wake field mechanism but grows with the particle energy, hindering acceleration in multiple stages.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accelerated Wind-Turbine Wake Recovery Through Actuation of the Tip-Vortex Instability

Advances in wind-plant control have often focused on more effectively balancing power between neighboring turbines. Wake steering is one such method that provides control-based improvements in a quasi-static way, but this does little to fundamentally change the wake recovery process, and thus, it has limited potential. This study investigates use of another control paradigm known as dynamic wake control (DWC) to excite the mutual inductance instability between adjacent tip-vortex structures, thereby accelerating the breakdown of the structures. The current work carries this approach beyond the hypothetical by applying the excitation via turbine control vectors that already exist on all modern wind turbines: blade pitch and rotor speed control. The investigation leverages a free-vortex wake method (FVWM) that allows a thorough exploration of relevant frequencies and amplitudes of harmonic forcing for each control vector (as well as the phase difference between the vectors for a tandem configuration) while still capturing the essential tip-vortex dynamics. The FVWM output feeds into a Fourier stability analysis working to pinpoint candidate DWC strategies suggesting fastest wake recovery. Near-wake length reductions of >80% are demonstrated, although without considering inflow turbulence. Analysis is provided to interpret these predictions considering the presence of turbulence in a real atmospheric inflow.

17 WIND ENERGY↗

Optimizing the Support of a Stellar Sensor

The mass of a support for a stellar sensor in a spacecraft is minimized in the light of requirements on the first eigenfrequency and the reactive force in the connectors. Topological and parametric optimization is employed. The finite-element method is adopted, within the capabilities of the Altair Optistruct system.

42 ENGINEERING↗

PHOTOMETRIC SELECTION OF A MASSIVE GALAXY CATALOG WITH z ≥ 0.55

We present the development of a photometrically selected massive galaxy catalog, targeting Luminous Red Galaxies (LRGs) and massive blue galaxies at redshifts of z⩾0.55. Massive galaxy candidates are selected using infrared/optical color–color cuts, with optical data from the Sloan Digital Sky Survey (SDSS) and infrared data from “unWISE” forced photometry derived from the Wide-field Infrared Survey Explorer (WISE). The selection method is based on previously developed techniques to select LRGs with z>0.5, and is optimized using receiver operating characteristic curves. The catalog contains 16,191,145 objects, selected over the full SDSS DR10 footprint. The redshift distribution of the resulting catalog is estimated using spectroscopic redshifts from the DEEP2 Galaxy Redshift Survey and photometric redshifts from COSMOS. Restframe U − B colors from DEEP2 are used to estimate LRG selection efficiency. Using DEEP2, the resulting catalog has an average redshift of z = 0.65, with a standard deviation of σ=2.0, and an average restframe of U−B=1.0, with a standard deviation of σ=0.27. Using COSMOS, the resulting catalog has an average redshift of z = 0.60, with a standard deviation of σ=1.8. We estimate 34% of the catalog to be blue galaxies with z⩾0.55. An estimated 9.6% of selected objects are blue sources with redshift z<0.55. Stellar contamination is estimated to be 1.8%.

79 ASTRONOMY AND ASTROPHYSICS↗

Generalized, Energy-conserving Numerical Simulations of Particles in General Relativity. I. Time-like and Null Geodesics

The numerical integration of particle trajectories in curved spacetimes is fundamental for obtaining realistic models of the particle dynamics around massive compact objects such as black holes and neutron stars. Generalized algorithms capable of handling generic metrics are needed for studies of both standard (Schwarzschild and Kerr metrics) and nonstandard (e.g., Schwarzschild metric plus nonclassical perturbations or multiple black hole metrics) spacetimes. The most commonly employed explicit numerical schemes (e.g., Runge–Kutta) are incapable of producing highly accurate results at critical points, e.g., in the regions close to the event horizon where gravity causes extreme curvature of the spacetime, at an acceptable computational cost. In this work we describe a generalized algorithm for the numerical integration of time-like (massive particles) and null (photons) geodesics in any given 3 + 1 split spacetime. We introduce a new, exactly energy-conserving implicit integration scheme based on the preservation of the underlying Hamiltonian, and we compare its properties with a standard fourth-order Runge–Kutta explicit scheme and an implicit midpoint scheme. We test the numerical performance of the three schemes against analytic solutions of particle and photon orbits in Schwarzschild and Kerr spacetimes. We additionally prove the versatility of our framework in handling more exotic metrics, such as Morris–Thorne wormholes and quantum-perturbed Schwarzschild black holes. The generalized method is also discussed in the perspective of future extensions to more complex particle dynamics, e.g., the addition of the Lorentz force acting on charged particles, which allows for test particle diagnostics in GRMHD simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanically driven centrifugal pyrolyzer

An apparatus for fast pyrolysis of biomass and other solid organic materials including a vertically oriented cylindrical vessel having a solids outlet proximate the bottom thereof, a vapor outlet, a top wall forming at least one opening, and an adjacent heated side wall. Disposed within the cylindrical vessel and extending through the at least one opening in the top wall is a rotor having a rotatable shaft coincident with the longitudinal axis of the cylindrical vessel to which is attached at least one substantially vertically oriented blade having one edge connected directly or indirectly with the rotatable shaft and having an opposite edge spaced apart from the heated side wall, whereby a non-radial, preferably tangential, force is imparted on the feedstock in the cylindrical vessel. Also disclosed is a method for fast pyrolysis of biomass and other solid organic materials.

47 OTHER INSTRUMENTATION↗

Automatic control of oscillatory penetration apparatus

A system and method for controlling an oscillatory penetration apparatus. An embodiment is a system and method for controlling a sonic drill having a displacement and an operating range and operating at a phase difference, said sonic drill comprising a push-pull piston and eccentrics, said method comprising: operating the push-pull piston at an initial push-pull force while the eccentrics are operated at a plurality of different operating frequencies within the operating range of the sonic drill and measuring the displacement at each operating frequency; determining an efficient operating frequency for the material being drilled and operating the eccentrics at said efficient operating frequency; determining the phase difference at which the sonic drill is operating; and if the phase difference is not substantially equal to minus ninety degrees, operating the push-pull piston at another push-pull force.

42 ENGINEERING↗

Refine your search to explore more results.