Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Sensitivity-based scaling for correlating structural response from different analytical models

A sensitivity-based linearly varying scale factor is described used to reconcile results from refined models for analysis of the same structure. The improved accuracy of the linear scale factor compared to a constant scale factor as well as the commonly used tangent approximation is demonstrated. A wing box structure is used as an example, with displacements, stresses, and frequencies correlated. The linear scale factor could permit the use of a simplified model in an optimization procedure during preliminary design to approximate the response given by a refined model over a considerable range of design changes.

Chang, Kwan J.↗

Sensitivity-based scaling for correlating structural response from different analytical models

This paper presents a sensitivity-based linearly varying scale factor used to reconcile results from simple and refined models for analysis of the same structure. The improved accuracy of the linear scale factor compared to a constant scale factor as well as the commonly used tangent approximation is demonstrated. A wing box structure is used as an example, with displacements, stresses and frequencies correlated. The linear scale factor could permit the use of a simplified model in an optimization procedure during preliminary design to approximate the response given by a refined model over a considerable range of design changes.

Chang, Kwan J.↗

Drag Measurement at Transonic Speeds on a Freely Falling Body

Direct measurements have been made of the drag of a special test body and its stabilizing tail surfaces throughout free drops from high altitudes. The data obtained have been used to establish the relation between the drag coefficient and the Mach number for the body and for the tail surfaces over a range of Mach numbers from 0.85 to 1.15. For bodies of the form tested, the drag per square foot of frontal area increased abruptly from about 3 percent of atmospheric pressure at a Mach number of 0.95 to 17 percent of atmospheric pressure at a Mach number of 1.00, then linearly with Mach number to 28 percent of atmospheric pressure at a Mach number of approximately 1.15. Some doubt exists as to the applicability of the tail drag results to the estimation of wing drag at transonic speeds because of the possibility of appreciable interference effects between the vertical and the horizontal surfaces and between the body and the tail surfaces. Insofar as they are applicable, the tail drag results indicated that with symmetrical 6-percent-thick area may be expected to increase abruptly from 4 percent of atmospheric pressure at a Mach number of 0.88 to 36 percent of atmospheric pressure at a Mach number of 1.00, then linearly with Mach number to approximately 50 percent of atmospheric pressure at a Mach number of 1.15.

Bailey, F. J., Jr.↗

The geometry of generalized force matching and related information metrics in coarse-graining of molecular systems

Using the probabilistic language of conditional expectations, we reformulate the force matching method for coarse-graining of molecular systems as a projection onto spaces of coarse observables. A practical outcome of this probabilistic description is the link of the force matching method with thermodynamic integration. This connection provides a way to systematically construct a local mean force and to optimally approximate the potential of mean force through force matching. We introduce a generalized force matching condition for the local mean force in the sense that allows the approximation of the potential of mean force under both linear and non-linear coarse graining mappings (e.g., reaction coordinates, end-to-end length of chains). Furthermore, we study the equivalence of force matching with relative entropy minimization which we derive for general non-linear coarse graining maps. We present in detail the generalized force matching condition through applications to specific examples in molecular systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reaction coordinates for electron transfer reactions

The polarization fluctuation and energy gap formulations of the reaction coordinate for outer sphere electron transfer are linearly related to the constant energy constraint Lagrangian multiplier m in Marcus' theory of electron transfer. The quadratic dependence of the free energies of the reactant and product intermediates on m and m+1, respectively, leads to similar dependence of the free energies on the reaction coordinates and to the same dependence of the activation energy on the reorganization energy and the standard reaction free energy. Within the approximations of a continuum model of the solvent and linear response of the longitudinal polarization to the electric field in Marcus' theory, both formulations of the reaction coordinate are expected to lead to the same results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Quantum Spectral Methods for Differential Equations

Recently developed quantum algorithms address computational challenges in numerical analysis by performing linear algebra in Hilbert space. Such algorithms can produce a quantum state proportional to the solution of a d-dimensional system of linear equations or linear differential equations with complexity poly(logd). While several of these algorithms approximate the solution to within ϵ with complexity poly(log(1/ϵ)), no such algorithm was previously known for differential equations with time-dependent coefficients. In this work, we develop a quantum algorithm for linear ordinary differential equations based on so-called spectral methods, an alternative to finite difference methods that approximates the solution globally. Using this approach, we give a quantum algorithm for time-dependent initial and boundary value problems with complexity poly(logd, log(1/ϵ)).

97 MATHEMATICS AND COMPUTING↗

Slip velocity boundary conditions for the lattice Boltzmann modeling of microchannel flows

Abstract Slip flows in ducts are important in numerous engineering applications, most notably in microchannel flows. Compared to the standard no‐slip Dirichlet condition, the case of slip formulates as a Robin‐type condition for the fluid tangential velocity. Such an increase in mathematical complexity is accompanied by a more challenging numerical transcription. The present work concerns with this topic, addressing the modeling of the slip velocity boundary condition in the lattice Boltzmann method (LBM) applied to steady slow viscous flows inside ducts of nontrivial shapes. As novelty, we extend the newly revised local second‐order boundary (LSOB) Dirichlet fluid flow method [ Philos. Trans. R. Soc. A 378, 20190404 (2020)] to implement the slip velocity condition within the two‐relaxation‐time (TRT) framework. The LSOB follows an in‐node philosophy where its operation principle seeks to explicitly reconstruct the unknown boundary populations in the form of a third‐order accurate Chapman–Enskog expansion, where the wall slip condition is built‐in as a normal Taylor‐type condition. The key point of this approach is that the required first‐ and second‐order momentum derivatives, rather than computed through nonlocal finite difference approximations, are locally determined through a simple local linear algebra procedure, whose formulation is particularly aided by the TRT symmetry argument. To express the obtained derivatives, two approaches are considered, called and , which operate with node and wall variables, respectively. These two formulations are developed to prescribe the physical slip condition over plane and curved walls, including the corners. Their consistency and accuracy characteristics are examined against alternative linkwise strategies to impose the wall slip velocity, such as the kinetic‐based diffusive bounce‐back scheme, the central linear interpolation slip scheme, and the multireflection slip scheme. The several slip schemes are tested over different 3D microchannel configurations, with walls not conforming with the LBM uniform mesh. Numerical tests confirm the advanced accuracy characteristics of the proposed LSOB slip boundary scheme, revealing the added challenge of the wall slip modeling, and that parabolic accuracy is a necessary requirement to reach second‐order accuracy within this problem class.

Silva, Goncalo↗

High-Pressure and Temperature Dependence of Electronic, Magnetic, Elastic, Thermodynamic, and Transport Properties of Full-Heusler Alloys Co{sub 2}YIn (Y = Nb, Zr)

Structural, elastic, magnetic, and electronic properties of Co{sub 2}YIn (Y = Nb, Zr) have been investigated by means of the full-potential linearized augmented plane wave along with generalized gradient approximation + U/modified Becke-Johnson method in the stable Fm-3m phase. The optimized equilibrium lattice parameter in stable phase is 6.1744 Å for Co{sub 2}NbIn and 6.2824 Å for Co{sub 2}ZrIn. We have calculated the spin-resolved density of states for both the alloys to show that the ferromagnetic behavior of Co{sub 2}NbIn is due to the exchange splitting of Co and Nb atoms and due to Co and Zr in Co{sub 2}ZrIn. In spin-up configuration, there is absence of energy gap while an energy gap can be seen in spin-down state for both the alloys exhibiting a half-metallic character. Through the elastic constants and their discussions, we have predicted the elastic behavior of the materials. The quasi-harmonic approximations have been employed to study the pressure- and temperature-dependent thermodynamic properties. The Boltzmann theory is employed to investigate the electronic transport properties of these alloys. The defined material properties may pay as a prime stand for the application of material in spintronics and thermoelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on Electronic Structures and Magnetic Properties of (Mn, Ga) Co-doped SnO{sub 2}

The electronic structures and magnetic properties of (Mn, Ga) co-doped SnO{sub 2} are studied by the first-principles calculations in full-potential linearized augmented plane wave formalism within generalized gradient approximations. We found that the doped system favors the ferromagnetic state and room-temperature ferromagnetism can be expected in it. The origin of ferromagnetism can be attributed to p-d exchange interactions as Mn-O-Mn. Ga acts as acceptor in (Mn, Ga) co-doped SnO{sub 2} host and can donate one hole, increasing the carrier concentration and thus leading to a more stable ferromagnetic state. These results suggest a recipe obtaining promising dilute magnetic semiconductor by doping nonmagnetic elements in SnO{sub 2} matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric, electronic, optical and chemical bonding properties of Ba{sub 2}PrRuO{sub 6}: At temperature 7 K and 150 K

Highlights: • DFT-FPLAPW method used for calculating the electronic structure. • The Fermi surface of BPRO (7 K and 150 K) is also calculated. • The complex dielectric function has been calculated. • Thermoelectric properties were also calculated using BoltzTraP code. • Power factor shows that both compounds are good thermoelectric materials at 600 K. - Abstract: We present first principles calculations of the band structure, density of states, electronic charge density, Fermi surface and optical properties of Ba{sub 2}PrRuO{sub 6} single crystals at two different temperatures. The atomic positions were optimized by minimizing the forces acting on the atoms. We have employed the full potential linear augmented plane wave method within local density approximation, generalized gradient approximation and Engel–Vosko generalized gradient approximation to treat the exchange correlation potential. The calculation shows that the compound is superconductor with strong hybridization near the Fermi energy level. Fermi surface is composed of two sheets. The calculated electronic specific heat capacities indicate, very close agreement with the experimental one. The bonding features of the compounds are analyzed using the electronic charge density in the (1 0 0) and (0–10) crystallographic planes. The dispersion of the optical constants was calculated and discussed. The thermoelectric properties are also calculated using the BoltzTrap code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulating ice-shelf extent using damage mechanics

Abstract Inaccurate representations of iceberg calving from ice shelves are a large source of uncertainty in mass-loss projections from the Antarctic ice sheet. Here, we address this limitation by implementing and testing a continuum damage-mechanics model in a continental scale ice-sheet model. The damage-mechanics formulation, based on a linear stability analysis and subsequent long-wavelength approximation of crevasses that evolve in a viscous medium, links damage evolution to climate forcing and the large-scale stresses within an ice shelf. We incorporate this model into the BISICLES ice-sheet model and test it by applying it to idealized (1) ice tongues, for which we present analytical solutions and (2) buttressed ice-shelf geometries. Our simulations show that the model reproduces the large disparity in lengths of ice shelves with geometries and melt rates broadly similar to those of four Antarctic ice shelves: Erebus Glacier Tongue (length ~ 13 km), the unembayed portion of Drygalski Ice Tongue (~ 65 km), the Amery Ice Shelf (~ 350 km) and the Ross Ice Shelf (~ 500 km). These results demonstrate that our simple continuum model holds promise for constraining realistic ice-shelf extents in large-scale ice-sheet models in a computationally tractable manner.

54 ENVIRONMENTAL SCIENCES↗

One-Component, Vinyl-Functional Fluorosilicone Pastes for Direct Ink Write Additive Manufacturing

In this study, one-component (“all-in-one”) fluorosilicone pastes specifically designed for application in direct ink write (DIW) additive manufacturing (AM) have been developed. They consist of vinyl-functional, methyltrifluoropropyl-containing (MeTfpS) terpolysiloxane base polymer(s), hydrosilyl-functional cross-linker(s), UV-sensitive hydrosilylation catalyst, thixotropic additive, and trimethylsilylated fumed silica filler, with other additives that are optional. Their base polymers were completely amorphous and linear, with molecular weights (M n ) ranging from approximately 7000 to 50,000 and specifically targeted for the viscosity range ideal for DIW. These polymers were prepared by anionic ring-opening polymerizations (A-ROP) of appropriate mixtures of cyclic siloxanes initiated by oligomeric, difunctional tetramethylammonium silanolate in the presence of a difunctional tetramethyldivinyldisiloxane end-blocker and molecular weight regulator. Two series of these terpolymers were prepared: one containing 5 mol % MeTfpS repeat units but varying degrees of polymerization (DP) from 80 to 600 and the other containing 5, 10, and 15 mol % MeTfpS at a constant DP of 600. All polymers contained mostly random distributions of MeTfpS repeat units. The pastes were prepared by speed-mixing, ready for use in DIW, they exhibited ideal thixotropy, long-term (over a year) rheological stability, and can be quickly (within seconds) and permanently cured by room-temperature, UV-activated hydrosilylation in air. The resulting elastomers showed base polymer molecular weight- and composition-dependent stress-induced crystallization (SIC) at higher molecular weights and lower trifluoropropyl contents and tunable Shore A hardness (30A–40A) typical for soft polysiloxane rubbers. Preliminary DIW tests indicated excellent printability with high precision of printed shapes and clearly present these one-component pastes as prime candidates for simple and practical printing of silicone elastomer objects.

36 MATERIALS SCIENCE↗

Shallow Rate-Redox Potential Scaling in Aqueous Molecular Oxygen Reduction Electrocatalysis Across a Family of Iron Macrocycles

Rate-overpotential scaling relationships have been employed widely to understand trends in oxygen reduction reaction (ORR) electrocatalysis by dissolved metal macrocycles in organic electrolytes. Similar scaling relationships remain unknown for surface-adsorbed ORR electrocatalysts in the acidic aqueous environments germane to proton-exchange membrane (PEM) fuel cells. Herein, we examine ORR catalysis in aqueous perchloric acid media for a structurally diverse array of iron macrocycle complexes adsorbed on Vulcan carbon black. The macrocycles encompass Fe– N 4 , Fe–N 2 N' 2 and Fe–N x C 4-x motifs bearing pyrrolic, pyridinic, and N-heterocyclic carbene (NHC) moieties in the primary ligation sphere, giving rise to a 670 mV range in Fe(III/II) redox potentials, E Fe(III/II) . Experimental Tafel data in the micropolarization regime were extrapolated to the E Fe(III/II) to furnish estimated per-site-normalized current density (j per-site ) values that span ~4.6 orders of magnitude across the family of compounds. Despite the structural diversity of this family of compounds, extrapolated j per-site values correlate with the Fe(III/II) redox potentials in a roughly log-linear fashion with a shallow scaling factor of approximately 145 mV/decade. Further, these findings highlight that negative shifts in E Fe(III/II) lead to diminishing returns in catalytic rate promotion and suggest that changes to the primary ligating environment in a macrocycle are insufficient to break fundamental rate-potential scaling relationships in aqueous ORR catalysis. Together these studies motivate the further development of higher-potential iron complexes that employ motifs beyond the equatorial ligation plane to enhance ORR catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relativistic Effects and Gold Site Distributions: Synthesis, Structure, and Bonding in a Polar Intermetallic Na6Cd16Au7

Na{sub 6}Cd{sub 16}Au{sub 7} has been synthesized via typical high-temperature reactions, and its structure refined by single crystal X-ray diffraction as cubic, Fm{bar 3}m, a = 13.589(1) {angstrom}, Z = 4. The structure consists of Cd{sub 8} tetrahedral star (TS) building blocks that are face capped by six shared gold (Au2) vertexes and further diagonally bridged via Au1 to generate an orthogonal, three-dimensional framework [Cd{sub 8}(Au2){sub 6/2}(Au1){sub 4/8}], an ordered ternary derivative of Mn{sub 6}Th{sub 23}. Linear muffin-tin-orbital (LMTO)-atomic sphere approximation (ASA) electronic structure calculations indicate that Na{sub 6}Cd{sub 16}Au{sub 7} is metallic and that {approx}76% of the total crystal orbital Hamilton populations (-ICOHP) originate from polar Cd-Au bonding with 18% more from fewer Cd-Cd contacts. Na{sub 6}Cd{sub 16}Au{sub 7} (45 valence electron count (vec)) is isotypic with the older electron-richer Mg{sub 6}Cu{sub 16}Si{sub 7} (56 vec) in which the atom types are switched and bonding characteristics among the network elements are altered considerably (Si for Au, Cu for Cd, Mg for Na). The earlier and more electronegative element Au now occupies the Si site, in accord with the larger relativistic bonding contributions from polar Cd-Au versus Cu-Si bonds with the neighboring Cd in the former Cu positions. Substantial electronic differences in partial densities-of-states (PDOS) and COHP data for all atoms emphasize these. Strong contributions of nearby Au 5d{sup 10} to bonding states without altering the formal vec are the likely origin of these effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of the Wave Normal Angle of Proton‐Band EMIC Waves Near Geosynchronous Orbit

We investigate how the wave normal angle (WNA) and polarization of proton-band electromagnetic ion cyclotron (EMIC) waves change as they travel from their source to Earth. This paper marks a significant milestone as the first full-wave simulation of proton-band EMIC waves reflecting from the ionosphere. Our findings show that the WNA can change rapidly during propagation, primarily due to plasma inhomogeneities, such as variations in the Alfvén speed. The wave polarization is strongly related to the WNA, consistent with theory. Newly generated EMIC waves near the equator propagate with a WNA of 0° , then the WNA gradually shifts to 90° as they move toward Earth. In contrast, reflecting waves having 90° of WNA at Earth maintain a relatively larger WNA even near the magnetic equator. As a result, only the newly generated waves close to the source, where the magnetic latitude is less than approximately 20° , show left-handed polarization, while linear polarization remains dominant throughout the rest of the propagation.

EMIC wave↗

Electron proportional gas counter for linear and elliptical Moessbauer polarimetry

Design, characterization, and selected applications of a novel electron detector dedicated to conventional perpendicular- and low-angle-incidence conversion electron Moessbauer spectroscopy are presented. The setup is suitable for varying the incident angle and external magnetic fields on Moessbauer source and absorber. Test experiments were performed on {alpha}-{sup 57}Fe films using a conventional single-line {sup 57}Co(Rh) and magnetically split, {sup 57}Co({alpha}-Fe) Moessbauer sources. The integral ''blackness effect'' in conversion-electron Moessbauer spectra of {sup 57}Fe isotope-enriched absorbers is demonstrated and shown to be pronounced at shallow angles of incidence. In order to determine the alignment and sign of the hyperfine field in an isotope-enriched absorber, the blackness effect is accounted for in a semiempirical way by using single-line source/absorber experimental relative intensities determined independently. This method works with high accuracy for linear polarimetry; however it is only a rough approximation in the case of nearly circular polarimetry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chiral symmetry in a hot and dense magnetic medium

We consider the Linear Sigma Model (LSM) in the Mean Field Approximation (MFA) in order to analyze hot and dense two flavor quark matter subject to strong magnetic fields. We pay especial attention to the case of a finite chemical potential, which has not yet been fully explored. Here, we investigate the strength of the chiral transition and the behavior of the sigma meson mass for {mu}= 0 and {mu}{ne} 0 under strong magnetic fields, as well as its effects over the T-{mu} plane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Orthogonality of embedded wave functions for different states in frozen-density embedding theory

Other than lowest-energy stationary embedded wave functions obtained in Frozen-Density Embedding Theory (FDET) [T. A. Wesolowski, Phys. Rev. A 77, 012504 (2008)] can be associated with electronic excited states but they can be mutually non-orthogonal. Although this does not violate any physical principles — embedded wave functions are only auxiliary objects used to obtain stationary densities — working with orthogonal functions has many practical advantages. In the present work, we show numerically that excitation energies obtained using conventional FDET calculations (allowing for non-orthogonality) can be obtained using embedded wave functions which are strictly orthogonal. The used method preserves the mathematical structure of FDET and self-consistency between energy, embedded wave function, and the embedding potential (they are connected through the Euler-Lagrange equations). The orthogonality is built-in through the linearization in the embedded density of the relevant components of the total energy functional. Moreover, we show formally that the differences between the expectation values of the embedded Hamiltonian are equal to the excitation energies, which is the exact result within linearized FDET. Linearized FDET is shown to be a robust approximation for a large class of reference densities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.