Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear data evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Thermal-Hydraulic Results for the Boiling Water Reactor Dry Cask Simulator.

The thermal performance of commercial nuclear spent fuel dry storage casks is evaluated through detailed numerical analysis. These modeling efforts are completed by the vendor to demonstrate performance and regulatory compliance. The calculations are then independently verified by the Nuclear Regulatory Commission (NRC). Carefully measured data sets generated from testing of full sized casks or smaller cask analogs are widely recognized as vital for validating these models. Recent advances in dry storage cask designs have significantly increased the maximum thermal load allowed in a cask in part by increasing the efficiency of internal conduction pathways and by increasing the internal convection through greater canister helium pressure. These same canistered cask systems rely on ventilation between the canister and the overpack to convect heat away from the canister to the environment for both aboveground and belowground configurations. While several testing programs have been previously conducted, these earlier validation attempts did not capture the effects of elevated helium pressures or accurately portray the external convection of aboveground and belowground canistered dry cask systems. The purpose of this investigation was to produce validation-quality data that can be used to test the validity of the modeling presently used to determine cladding temperatures in modern vertical dry casks. These cladding temperatures are critical to evaluate cladding integrity throughout the storage cycle. To produce these data sets under well-controlled boundary conditions, the dry cask simulator (DCS) was built to study the thermal-hydraulic response of fuel under a variety of heat loads, internal vessel pressures, and external configurations. An existing electrically heated but otherwise prototypic BWR Incoloy-clad test assembly was deployed inside of a representative storage basket and cylindrical pressure vessel that represents a vertical canister system. The symmetric single assembly geometry with well-controlled boundary conditions simplified interpretation of results. Two different arrangements of ducting were used to mimic conditions for aboveground and belowground storage configurations for vertical, dry cask systems with canisters. Transverse and axial temperature profiles were measured throughout the test assembly. The induced air mass flow rate was measured for both the aboveground and belowground configurations. In addition, the impact of cross-wind conditions on the belowground configuration was quantified. Over 40 unique data sets were collected and analyzed for these efforts. Fourteen data sets for the aboveground configuration were recorded for powers and internal pressures ranging from 0.5 to 5.0 kW and 0.3 to 800 kPa absolute, respectively. Similarly, fourteen data sets were logged for the belowground configuration starting at ambient conditions and concluding with thermal-hydraulic steady state. Over thirteen tests were conducted using a custom-built wind machine. The results documented in this report highlight a small, but representative, subset of the available data from this test series. This addition to the dry cask experimental database signifies a substantial addition of first-of-a-kind, high-fidelity transient and steady-state thermal-hydraulic data sets suitable for CFD model validation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Advanced engineering environment collaboration project.

The Advanced Engineering Environment (AEE) is a model for an engineering design and communications system that will enhance project collaboration throughout the nuclear weapons complex (NWC). Sandia National Laboratories and Parametric Technology Corporation (PTC) worked together on a prototype project to evaluate the suitability of a portion of PTC's Windchill 9.0 suite of data management, design and collaboration tools as the basis for an AEE. The AEE project team implemented Windchill 9.0 development servers in both classified and unclassified domains and used them to test and evaluate the Windchill tool suite relative to the needs of the NWC using weapons project use cases. A primary deliverable was the development of a new real time collaborative desktop design and engineering process using PDMLink (data management tool), Pro/Engineer (mechanical computer aided design tool) and ProductView Lite (visualization tool). Additional project activities included evaluations of PTC's electrical computer aided design, visualization, and engineering calculations applications. This report documents the AEE project work to share information and lessons learned with other NWC sites. It also provides PTC with recommendations for improving their products for NWC applications.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Physics model of a gas-cooled fast reactor: Review and assessment

The current physics design and analysis model was reviewed and assessed for its application to a long-life gas-cooled fast reactor (GFR) design. The physics design uses MICROX, BURP, and DIF3D for the cross section generation, depletion calculation, and criticality and flux calculation, respectively. For the application to the long-life GFR, the depletion model was adjusted such that more lumped fission products are included in the burn-up chain to preserve the reaction rate and fuel mass. The performance of the physics design tools including the adjustment of the depletion model was assessed against Monte Carlo depletion calculations. The comparison has shown that the excess reactivity and cycle length of the long-life GFR are reasonably predicted. Some discrepancies were found at the beginning of cycle, which can be attributed to the differences between the nuclear data used in each model. Further studies will be carried out to update the cross section library of the MICROX code for agreement with the latest sets and to expand the fuel burn-up chain for the high burn-up and recycling fuel cycle analysis. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plan for a Data Base Approach to Evaluating LWR Plant Integration with Hydrogen and Industrial Facilities

The purpose of this report is to provide an outline and scope of a database tool that could be used to identify the most beneficial locations to site a hydrogen, chemical facility or other industrial facility that would be powered by nuclear energy. This energy may be in the form of electricity produced by the plant, heat in the form of steam or both. In addition, this siting tool should consider factors such as economics, geography, industries, residences, geological hydrogen storage, and key infrastructure. The infrastructure to be considered could include pipelines or other storage and transportation facilities to carry the created products from the production facility to the end user. Also considered should be infrastructure that could deliver needed chemicals or gasses to allow the production of desired products such as ammonia or biofuels. This data base tool should allow a screening study of all U.S. nuclear plants to identify opportunities and barriers to creating hydrogen hubs around nuclear power plants. For this effort, it has been decided that the Siting Tool for Advanced Nuclear Development (STAND) would be used to conduct this screening study which is a follow-on research project to this present effort. Currently, plans are being developed to modify the STAND tool to provide the capability necessary to perform screening of each US commercial nuclear plant to identify the best locations to site hydrogen or chemical production facilities. Many features of the current STAND tool will be employed to meet this objective, but additional infrastructure data (such as the location of pipelines) may need to be added to allow these locations to be fully vetted. In addition, new analysis capabilities may need to be added so economic considerations can be understood

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Precision Environmental Radiation Monitoring System

A new precision low-level environmental radiation monitoring system has been developed and tested at Jefferson Lab. This system provides environmental radiation measurements with accuracy and stability of the order of 1 nGy/h in an hour, roughly corresponding to approximately 1% of the natural cosmic background at the sea level. Advanced electronic front-end has been designed and produced for use with the industry-standard High Pressure Ionization Chamber detector hardware. A new highly sensitive readout electronic circuit was designed to measure charge from the virtually suspended ionization chamber ion collecting electrode. New signal processing technique and dedicated data acquisition were tested together with the new readout. The designed system enabled data collection in a remote Linux-operated computer workstation, which was connected to the detectors using a standard telephone cable line. The data acquisition system algorithm is built around the continuously running 24-bit resolution 192 kHz data sampling analog to digital convertor. The major features of the design include: extremely low leakage current in the input circuit, true charge integrating mode operation, and relatively fast response to the intermediate radiation change. These features allow operating of the device as an environmental radiation monitor, at the perimeters of the radiation-generating installations in densely populated areas, like in other monitoring and security applications requiring high precision and long-term stability. Initial system evaluation results are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neutron Capture and Transmission Measurements of 54 Fe at the RPI LINAC

54 Fe radiative capture cross section and transmission measurements were conducted at the Rensselaer Polytechnic Institute (RPI) Gaerttner Linear Accelerator (LINAC) Center using an enriched 54 Fe sample in the keV energy region. 54 Fe is a constituent of natural iron, which is present in a large variety of nuclear grade materials. Therefore, it is important to have an accurate understanding of the cross sections of 54 Fe, which can be measured experimentally. In the time-of-flight measurements conducted at the LINAC, an array of four C 6 D 6 detectors surrounded the sample and radiative capture data were collected using a digital data acquisition system. Additionally, a Li-glass detector was used to collect transmission data using an analog data acquisition system. The radiative capture yield of the 54 Fe measurements were normalized to saturated resonances observed in Au and Ta to obtain an absolute capture yield. The preliminary capture yield and preliminary transmission obtained can be compared to evaluations and existing experimental data. Some disagreements were observed in prominent d-wave capture resonances observed in 54 Fe in the low-keV neutron energy region. Both sets of experimental data along with pre-existing datasets will greatly enhance RPI’s ability to perform resonance evaluation for 54 Fe up to roughly 1 MeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Selenium interaction with iron minerals: Quantitative comparison of sorption and coprecipitation impacts on mobility

Given the significance of selenium (Se) as a micronutrient, the radioactive nature of some of its isotopes, and its affinity to iron (Fe) minerals, extensive research has been conducted on the sorption mechanisms between Se and these minerals. Here, in this study, we employ sorption data sourced from the L-SCIE database and coprecipitation data from available literature to achieve the following objectives: i) establish coherence between adsorption and coprecipitation processes, ii) quantitatively evaluate the importance of these processes in nuclear waste repository science, and iii) propose a forward-looking approach for integrating coprecipitation into reactive transport models. Our findings indicate that a correlation between Se adsorption and coprecipitation can be established using the λ formalism. The comparable log(λ Se(IV) /λ Se(VI) ) ratios derived from adsorption and coprecipitation experiments suggest that these processes can be quantitatively compared and evaluated using our numerical approach. Across all iron oxide phases examined, coprecipitation leads to significantly greater immobilization of Se compared to adsorption. Specifically, for hydrous ferric oxide, hematite, and goethite, coprecipitation is predicted to result in 100–1000 times more Se immobilization compared to adsorption, irrespective of the Se oxidation state (Se(IV) or Se(VI)); notably stronger immobilization potential via coprecipitation was observed for magnetite. The modeling approach and quantitative analysis presented herein clearly highlight the importance of including coprecipitation processes when simulating Se (and other elements) transport, particularly under conditions where mineral compositions are transient or evolving with time. Neglecting coprecipitation in models is likely to lead to significant overestimates of migration.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Energy levels of odd-even nuclei using broken pair model

A method to calculate energy levels and wave functions of odd-even nuclei, in the frame work of the broken pair model have been developed. The accuracy of the model has been tested by comparing the shell model results of limiting cases in which the broken pair model exactly coincides with the shell model, where there are two-proton/neutron + one-neutron/proton in the valence levels. The model is then applied to calculate the energy levels of some nuclei in the Zirconium region. The model results compare reasonably well with the shell model as well as with the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear matter equation of state and three-body forces

The energy per particle, symmetry energy, pressure, and free energy are calculated for symmetric nuclear matter using BHF approach with modern nucleon-nucleon CD-Bonn, Nijm1, Argonne v{sub 18}, and Reid 93 potentials. To obtain saturation in nuclear matter we add three-body interaction terms which are equivalent to a density-dependent two-nucleon interaction a la Skyrme force. Good agreement is obtained in comparison with previous theoretical estimates and experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of a global database containing tritium in precipitation

The International Atomic Energy Agency (IAEA) directed the collection of tritium in water samples from the mid-1950s to 2009. The Global Network of Isotopes in Precipitation (GNIP) data examined the airborne movement of isotope releases to the environment, with an objective of collecting spatial data on the isotope content of precipitation across the globe. The initial motivation was to monitor atmospheric thermonuclear test fallout through tritium, deuterium, and oxygen isotope concentrations, but after the 1970s the focus changed to being an observation network of stable hydrogen and oxygen isotope data for hydrologic studies. The GNIP database provides a wealth of tritium data collections over a long period of time. The work performed here primarily examined data features in the past 30 years (after much of the effects of above-ground nuclear testing in the late 1950s to early 1960s decayed away), revealing potentially unknown tritium sources. The available data at GNIP were reorganized to allow for evaluation of trends in the data both temporally and spatially. Several interesting cases were revealed, including relatively high measured concentrations in the Atlantic and Indian Oceans, Russia, Norway, as well as an increase in background concentration at a collector in South Korea after 2004. Recent data from stations in the southeastern United States nearest to the Savannah River Site do not indicate any high values. Meteorological impacts have not been considered in this study. Further research to assess the likely source location of interesting cases using transport simulations and/or literature searches is warranted.

54 ENVIRONMENTAL SCIENCES↗

Extensive sensitivity study of PWR fuel assay data - 14301

Accurate calculations of the isotopic composition of spent nuclear fuel play a fundamental role in several parts of nuclear energy. An important example is the use of burnup credit in criticality safety analysis, where the results gained from depletion calculations are used to determine the fuel composition in subsequent criticality calculations. The work presented here is a sensitivity study for depletion calculations of high-burnup fuel samples from the Vandellos II PWR that entails an unusually detailed evaluation of assay data. In addition to investigating the impacts of experimental uncertainties on the calculated isotopic composition, the consequences of various modelling approaches are studied to give quantitative estimations of the impact on accuracy. Furthermore, the reactivity of the calculated fuel composition is tracked, because this is the integral characteristic of the irradiated fuel that one is actually interested in for burnup credit applications. While the sensitivity study is performed only for one of the nine experimental samples of the Vandellos II assay data, the lessons learned lead to evaluation models with different levels of model detail for all fuel samples. The results show that the discrepancies between the measured and calculated isotopic compositions are considerably larger than the uncertainties inherent in the measurement and the calculation method would indicate. This is not unexpected, since large discrepancies are a common result of assay data recalculations. However, the unusually extensive sensitivity study performed here allows to exclude some possible sources of error: since the influence of experimental uncertainties like fuel assembly geometry and reactor parameters on the isotopic composition is shown to be small, one valuable conclusion of this study is to focus more on the measurement uncertainties of the chemical assay itself, and the nuclear data that the calculation is based upon. The study also demonstrates that using the reactivity of the depleted fuel as an additional comparison point between measurement and calculation can provide some orientation regarding the importance of the manifold influences on calculation results. Tracking this integral characteristic of the depleted fuel is very helpful in focusing on the actual impact of the depletion calculation uncertainties on criticality safety. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

H-2, H-3, He-3 production in solar flares

The production of deuterium, tritium, and helium-3 from nuclear reactions of accelerated charged particles is evaluated with the ambient solar atmosphere. Updated cross sections and kinematics are used, calculations are extended to very low energies (approximates 0.1 MeV/nucleon), and the angular distribution of the secondary particles is calculated. The calculations are compared with data on accelerated isotopes from solar flares. In particular, the August 1972 events are considered for which both He-3 and nuclear gamma rays were observed. An explanation for He-3-rich events is provided in terms of the angular distributions of secondary isotopes, and the flux of 2.2 MeV gamma rays from such flares are also predicted.

Ramaty, R.↗

Nuclear Data – Benchmarking 19 F(α,n) Yield Data for Nuclear Safeguards

Fluorine compounds of U and Pu are ubiquitous in the nuclear fuel cycle, so F(α,n) neutrons are an important signature and quantitative source term that needs to be understood for physics-based interpretation of nondestructive assay measurements. Historically there have been large differences in the basic nuclear data for this reaction reported by various groups. UF 6 is the most prominent material in the nuclear fuel cycle, with the potential for short-term production into weaponizable form. Verification of bulk quantities, natural feed, depleted tails, and especially low enriched product in cylinders is particularly important. The principal physical measurement is neutron counting. For enriched material, the 19 F(α,n) reaction, driven by 234U, is the dominant source of neutrons. Basic nuclear data, cross sections, needed to calculate the yield, as well as information on the source spectrum for sensitivity studies are sparse and highly discrepant. This limits defensible physics-based performance evaluations. The same applies to holdup and criticality studies in which hydrated uranyl fluoride is the material of interest which accumulates in enrichment facilities. In the future we anticipate that the physics community will have made improved accelerator-based measurements and undertaken a more thorough evaluation and adjustment of all relevant available data. But in the short term, this does not help the safeguards community face the pressing real-world nondestructive assay requirements. To address this need, we have performed quality neutron measurements on UF6 materials using well-known material and high-capability neutron counters. A robust determination of the n/s/g of 234 U in UF 6 was generated along with a scientifically defensible uncertainty analysis. The weighted average value of the neutron yield is 509 n/s/g 234 U with a random uncertainty of approximately 1%. Dominant sources of systematic uncertainty are in the efficiency determination where we incur approximately 1.1% relative standard deviation associated with the 252 Cf reference source and about 0.9% uncertainty coming from the uncertainty in the F(α,n) spectrum. The stated uncertainties are an order of magnitude better than current data based on accelerator data reported in the literature. Aside from being of immediate and direct use by the safeguards community, this result will serve as an enduring integral benchmark for subsequent data evaluations that will need to match it in order to be credible. In addition to yield normalization, safeguards users of F(α,n) data also need guidance of the neutron emission spectrum. We have generated a neutron emission using a modified version of the well-known SOURCES 4C code, updated with new alpha stopping power coefficients, and a blended microscopic cross section data set. The yield and spectra are available in a form that MCNP users can readily use.

36 MATERIALS SCIENCE↗

Optimization and supervised machine learning methods for fitting numerical physics models without derivatives

Here, we address the calibration of a computationally expensive nuclear physics model for which derivative information with respect to the fit parameters is not readily available. Of particular interest is the performance of optimization-based training algorithms when dozens, rather than millions or more, of training data are available and when the expense of the model places limitations on the number of concurrent model evaluations that can be performed. As a case study, we consider the Fayans energy density functional model, which has characteristics similar to many model fitting and calibration problems in nuclear physics. We analyze hyperparameter tuning considerations and variability associated with stochastic optimization algorithms and illustrate considerations for tuning in different computational settings.

97 MATHEMATICS AND COMPUTING↗

Program ELM: A tool for rapid thermal-hydraulic analysis of solid-core nuclear rocket fuel elements

This report reviews the state of the art of thermal-hydraulic analysis codes and presents a new code, Program ELM, for analysis of fuel elements. ELM is a concise computational tool for modeling the steady-state thermal-hydraulics of propellant flow through fuel element coolant channels in a nuclear thermal rocket reactor with axial coolant passages. The program was developed as a tool to swiftly evaluate various heat transfer coefficient and friction factor correlations generated for turbulent pipe flow with heat addition which have been used in previous programs. Thus, a consistent comparison of these correlations was performed, as well as a comparison with data from the NRX reactor experiments from the Nuclear Engine for Rocket Vehicle Applications (NERVA) project. This report describes the ELM Program algorithm, input/output, and validation efforts and provides a listing of the code.

Walton, James T.↗

Milestone 2.7: Evaluation of Techniques for the Measurement of Molecular Hydrogen Gas in Helium Matrices

Published data by Task 2 (Oxyhydroxide Layer Radiolytic Gas Generation Resolution) for Technical Considerations and Challenges for Extended (>50 yrs) Dry Storage of Aluminum Cladded Spent Nuclear Fuel (ASNF), demonstrated that radiolytic molecular hydrogen (H2) production from gamma irradiated aluminum alloy 1100 (Al-1100) coupons exhibited significant dependence on backfill gaseous environment conditions: air, due to the presence of oxygen, completely inhibited H2 production; nitrogen promoted H2 production; and argon yielded more H2 than nitrogen environments. The concern here is that helium has been proposed as the backfill gas for extended storage and is more inert than argon, which may translate into significantly more H2 production than current Task 3 argon-based models predict. However, the measurement of H2 in helium media was not possible using the previously establish gas chromatography (GC) flame ionization detector, due to similarities in thermal conductivity. This milestone was initiated to evaluate an alternative GC approach that employed a mercuric oxide (HgO) reduction gas detector (RGD). Using the HgO RGD setup, H2 was successfully calibrated in the presence of a helium carrier gas, and then subsequently measured in control and irradiated crush-tube sample vials, consistent with previous sample measurements. Overall, the HgO RGD approach was found to be sufficient for future helium environment irradiations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

EVALUATION OF LVDTS FOR USE IN ATR IRRADIATION EXPERIMENTS

New materials are being considered for fuel, cladding, and structures in next generation and existing nuclear reactors. Such materials can experience significant dimensional changes during high temperature irradiation. Currently, these changes are determined by repeatedly irradiating a specimen for a defined period of time in the Advanced Test Reactor (ATR) and then removing it from the reactor for evaluation. The time and labor to remove, examine, and return irradiated samples for each measurement makes this approach very expensive. In addition, such techniques provide limited data and may disturb the phenomena of interest. To address these issues, the Idaho National Laboratory (INL) recently initiated efforts to evaluate candidate linear variable differential transducers (LVDTs) for use during high temperature irradiation experiments in typical ATR test locations. Two nuclear grade LVDTs are under consideration – a smaller diameter design qualified for temperatures up to 350 °C and a larger design with capabilities to 500 °C. Calibration and long duration performance evaluations are underway for temperatures up to 600 ºC. This paper presents results from these evaluations, which will ultimately lead to recommendations for an improved design for use in the ATR.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Bruyères-le-Châtel Neutron Evaluations of Actinides with the TALYS Code: The Fission Channel

For several years, various neutron evaluations of plutonium and uranium isotopes have been performed at Bruyères-le-Châtel (BRC), from 1 keV up to 30 MeV. Since only nuclear reaction models have been used to produce these evaluations, our approach was named the “Full Model” approach. Total, shape elastic and direct inelastic cross sections were obtained from the coupled channels model using a dispersive optical potential developed for actinides, with a large enough coupling scheme including the lowest octupolar band. All other cross sections were calculated using the Hauser-Feshbach theory (TALYS code) with a pre-equilibrium component above 8–10 MeV. In this paper, we focus our attention on the fission channel. More precisely, we will present the BRC contribution to fission modeling and the philosophy adopted in our “Full Model” approach. Performing evaluations with the “Full Model” approach implies the optimization of a large number of model parameters. With increasing neutron incident energy, many residual nuclei produced by nucleon emission also lead to fission. All available experimental data assigned to various fission mechanisms of the same nucleus were used to determine fission barrier parameters. For uranium isotopes, triple-humped fission barriers were required in order to reproduce accurately variations of the experimental fission cross sections. Our BRC fission modeling has shown that the effects of the class II or class III states located in the wells of the fission barrier sometimes provide an anti-resonant transmission rather than a resonant one. Consistent evaluations were produced for a large series of U and Pu isotopes. Resulting files were tested against integral data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Refine your search to explore more results.