Search NASA⌕ Search

SEARCH · Search NASA

Results for “stability selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Innovative Self-Healing Seals for Solid Oxide Fuel Cells (SOFC)

Solid oxide fuel cell (SOFC) technology is critical to several national initiatives. Solid State Energy Conversion Alliance (SECA) addresses the technology needs through its comprehensive programs on SOFC. A reliable and cost-effective seal that works at high temperatures is essential to the long-term performance of the SOFC for 40,000 hours at 800°C. Consequently, seals remain an area of highest priority for the SECA program and its industry teams. An innovative concept based on self-healing glasses was advanced and successfully demonstrated through seal tests for 3000 hours and 300 thermal cycles to minimize internal stresses under both steady state and thermal transients for making reliable seals for the SECA program. The self-healing concept requires glasses with low viscosity at the SOFC operating temperature of 800°C but this requirement may lead to excessive flow of the glass in areas forming the seal. To address this challenge, a modification to glass properties by addition of particulate fillers is pursued in the project. The underlying idea is that a non-reactive ceramic particulate filler is expected to form glass-ceramic composite and increase the seal viscosity thereby increasing the creep resistance of the glass-composite seals under load. The objectives of the program are to select appropriate filler materials for making glass-composite, fabricate glass-composites, measure thermal expansion behaviors, and determine stability of the glass-composites in air and fuel environments of a SOFC. Self-healing glass-YSZ composites are further developed and tested over a longer time periods under conditions typical of the SOFCs to validate the long-term stability up to 2000 hours. The new concepts of glass-composite seals, developed and nurtured in this program, are expected to be cost-effective as these are based on conventional processing approaches and use of the inexpensive materials.

30 DIRECT ENERGY CONVERSION↗

Preparation of Simulated LBL Defects for Round Robin Experiment

A critical characteristic of the TRISO fuel design is its ability to retain fission products. During reactor operation, the TRISO layers act as barriers to release of fission products not stabilized in the kernel. Each component of the TRISO particle and compact construction plays a unique role in retaining select fission products, and layer performance is often interrelated. The IPyC, SiC, and OPyC layers are barriers to the release of fission product gases such as Kr and Xe. The SiC layer provides the primary barrier to release of metallic fission products not retained in the kernel, as transport across the SiC layer is rate limiting due to the greater permeability of the IPyC and OPyC layers to many metallic fission products. These attributes allow intact TRISO coatings to successfully retain most fission products released from the kernel, with the majority of released fission products during operation being due to defective, damaged, or failed coatings. This dominant release of fission products from compromised particles contributes to the overall source term in reactor; causing safety and maintenance concerns and limiting the lifetime of the fuel. Under these considerations, an understanding of the nature and frequency of compromised particles is an important part of predicting the expected fission product release and ensuring safe and efficient operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Definition of the Stiesdal Offshore TetraSpar Floating Wind System for OC6 Phase IV

The Offshore Code Comparison Collaboration, Continued, with Correlation, and unCertainty (OC6) is an international project focused on verifying and validating modeling tools used in the analysis of floating offshore wind systems. The fourth phase of the project aims to assess the ability of the tools to model a novel floating wind design. The TetraSpar was designed by Stiesdal Offshore Technologies and was selected as the subject platform for the project. The platform is a unique design that features spar-like stability with a very low center of gravity, but does not require rare deep-water ports. This combination is achieved with a system made of two separate steel structures, a hull at the water's surface that supports the wind turbine tower, and a keel that is suspended below the main body. This lower keel has a very high density and drives the total platform's low center of gravity. The TetraSpar, with hull and keel, spar-type stability, and relatively slender components, is unique compared to platforms studied in earlier phases of OC3-OC6 projects, and it offers an opportunity to evaluate the applicability of modeling tools to a novel design, especially unique hydrodynamics and compliant cables. Scaled model tests of the TetraSpar design were performed in 2018-2019 by the University of Maine. The data collected in the model tests provides a detailed description of the response of the platform in various controlled and relatively well understood conditions. Comparison with this data provides a good opportunity for validation of numerical models. The OC6 Phase IV work focuses on the specific parameters used in these scaled model tests. Descriptions of the platform and the test campaign in this document are based on the report written by Allen and Fowler of the University of Maine in 2019.

17 WIND ENERGY↗

Integrated Direct Air Capture and H₂-Free CO₂ Valorization

This project advances fundamental understanding of a novel integrated direct air capture (DAC) and CO₂ conversion process that valorizes atmospheric CO₂ without external H₂. The research encompasses four critical components: (1) design of task-specific ionic liquids for efficient CO₂ capture under ambient conditions, (2) development of H₂-free tandem catalytic systems using ethane as a reductant, (3) advanced operando characterization to elucidate capture and conversion mechanisms, and (4) data science-driven predictive computation to accelerate material discovery. Over the project period, we developed five high-performance DAC sorbent systems—including CaO/superbase ionic liquid composites, Ni-MOF/Ionic Liquid (IL) hybrids, fluorinated covalent organic frameworks with ion-pair functional groups, defect-engineered UiO-66, and a validated kinetic model for humid-condition operation, achieving CO₂ capacities up to 1.86 mmol/g at 400 ppm with excellent cycling stability. For H₂-free conversion, we constructed atomically synergistic Zn–O–Cr binuclear catalytic sites that achieve 100% ethylene selectivity, ~9.6% ethane conversion, and 99% CO₂ utilization in equimolar co-conversion of ethane and CO₂. We further demonstrated downstream valorization pathways converting CO and C₂H₄ into polyketones and C₃ chemicals. These advances strengthen the scientific foundation for producing value-added materials from ambient CO₂.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CRISPR-COPIES: Web Tool

CRISPR/Cas system has emerged as a powerful genome-editing tool for metabolic engineering and human gene therapy. However, the conundrum of where to integrate heterologous genes on the chromosome using the CRISPR/Cas system remains an open question. Selecting a site for gene integration requires incorporation of complex criteria such as factors involved in CRISPR/Cas-mediated integration, genetic stability, and gene expression and therefore, usually requires strenuous characterization of sites on particular or different chromosomal locations. To address these issues, we developed CRISPR-COPIES, a COmputational Pipeline for the Identification of CRISPR/Cas-facilitated intEgration Sites. The tool applies ScaNN, a state-of-the-art model on the embedding-based nearest neighbor search for fast and accurate off-target search and can identify genome-wide intergenic sites for most bacterial and fungal genomes within minutes. This submission contains the code we developed to create a user-friendly web interface for CRISPR-COPIES (https://biofoundry.web.illinois.edu/copies/). We anticipate CRISPR-COPIES will serve as a useful tool for targeted DNA integration and aid in the characterization of synthetic biology toolkits, rapid strain construction to produce valuable biochemicals, and human gene and cell therapy.

Bioinformatics↗

Synthetic oils

Synthetic lubricants are discussed by chemical class and their general strengths and weaknesses in terms of lubrication properties are analyzed. Comparative ratings are given for 14 chemical classes and are used as a guide for lubricant selection. The effects of chemical structure on the properties of the lubricant are described with special emphasis on thermal stability. The diversity of synthetic lubricants which is provided by the wide range of properties permits many applications, some of which are reported.

Hatton, R. E.↗

Development of a miniature solid propellant rocket motor for use in plume simulation studies

A miniature solid propellant rocket motor has been developed to be used in a program to determine those parameters which must be duplicated in a cold gas flow to produce aerodynamic effects on an experimental model similar to those produced by hot, particle-laden exhaust plumes. Phenomena encountered during the testing of the miniature solid propellant motors included erosive propellant burning caused by high flow velocities parallel to the propellant surface, regressive propellant burning as a result of exposed propellant edges, the deposition of aluminum oxide on the nozzle surfaces sufficient to cause aerodynamic nozzle throat geometry changes, and thermal erosion of the nozzle throat at high chamber pressures. A series of tests was conducted to establish the stability of the rocket chamber pressure and the repeatibility of test conditions. Data are presented which define the tests selected to represent the final test matrix. Qualitative observations are also presented concerning the phenomena experienced based on the results of a large number or rocket tests not directly applicable to the final test matrix.

Baran, W. J.↗

Long term flight electrodes

The reproducibility, stability, and methods of preparation for the various types and forms of biomedical electrodes are discussed. A critical and selective compilation of information on biological and/or physiological electrodes is presented. A discussion of plant hydrocolloids, clays, hydrophyllic colloids, synthetic waxes, and acrylic polymers is included.

Mosier, B.↗

An experimental investigation of the flap-lag stability of a hingeless rotor with comparable levels of hub and blade stiffness in hovering flight

An experimental investigation of the flap-lag stability of a hingeless rotor in hovering flight is presented and discussed. The rotor blade and hub configuration were selected such that the hub and blade had comparable levels of bending stiffness. Experimental measurements of the lag damping were made for various values of rotor rotational speed and blade pitch angle. Specifically at a blade pitch angle of 8 deg at three-quarters radius, the lag damping was determined over a range of rotational speeds from 200 RPM to 320 RPM and also over a range of blade pitch angles from 0 deg to 8 deg.

Curtiss, H. C., Jr.↗

Accumulator

An accumulator particularly adapted for use in controlling the pressure of a stream of fluid in its liquid phase utilizing the fluid in its gaseous phase was designed. The accumulator is characterized by a shell defining a pressure chamber having an entry throat for a liquid and adapted to be connected in contiguous relation with a selected conduit having a stream of fluid flowing through the conduit in its liquid phase. A pressure and volume stabilization tube, including an array of pressure relief perforations is projected into the chamber with the perforations disposed adjacent to the entry throat for accommodating a discharge of the fluid in either gaseous or liquid phases, while a gas inlet and liquid to gas conversion system is provided, the chamber is connected with a source of the fluid for continuously pressuring the chamber for controlling the pressure of the stream of liquid.

Fenwick, J. R.↗

Optimal control of the Shuttle-Tethered-Subsatellite system

Alternate control laws based on an application of the linear regulator problem are developed for possible use in the operation of the Shuttle-Tethered-Subsatellite system. Control is assumed to be provided only by modulating the tension level in the tether as a function of the difference between actual and commanded tether line length, length rate, in (orbital) plane swing angle and swing angle rate. Necessary and sufficient conditions for stability of the (linear) system motion in the vicinity of its nominal local vertical orientation are developed. By proper selection of the state and control penalty matrices it is possible to obtain faster responses with no increase in maximum power levels for use in station keeping when compared with alternate control strategies. The weighting matrices are adjusted in a piecewise adaptive manner to provide control law gains in order to achieve a smooth deployment history. Successful retrieval is dependent mainly on the initial conditions and the rate at which the commanded length is reduced.

Bainum, P. M.↗

Stable boundary approximations for a class of implicit schemes for the one-dimensional inviscid equations of gas dynamics

The applicability to practical calculations of recent theoretical developments in the stability analysis of difference approximations for initial-boundary-value problems of the hyperbolic type. For the numerical experiments, select the one-dimensional inviscid gas-dynamic equations in conservation-law form is selected. A class of implicit schemes based on linear multistep methods for ordinary differential equations is chosen and the use of space or space-time extrapolations as implicit or explicit boundary schemes is emphasized. Some numerical examples with various inflow-outflow conditions highlight the commonly discussed issues: explicit versus implicit boundary schemes, unconditionally stable schemes, and underspecification or overspecification of boundary conditions.

Yee, H. C.↗

High-Cycle-Life Lithium Cell

Lithium-anode electrochemical cell offers increased number of charge/ discharge cycles. Cell uses components selected for compatibility with electrolyte solvent: These materials are wettable and chemically stable. Low vapor pressure and high electrochemical stability of solvent improve cell packaging, handling, and safety. Cell operates at modest temperatures - less than 100 degrees C - and is well suited to automotive, communications, and other applications.

Yen, S. P. S.↗

Assessment of dynamic analyses for deploying space truss structures

A selected list of references on the analysis of the deployment concepts for large space truss structures are reviewed. The stability of the deployment process is discussed, and stable methods of deployment mentioned. Analytical and experimental needs to assess feasibility and performance of proposed deployment concepts are outlined.

Weidman, D.↗

Digital Filters for Digital Phase-locked Loops

An s/z hybrid model for a general phase locked loop is proposed. The impact of the loop filter on the stability, gain margin, noise equivalent bandwidth, steady state error and time response is investigated. A specific digital filter is selected which maximizes the overall gain margin of the loop. This filter can have any desired number of integrators. Three integrators are sufficient in order to track a phase jerk with zero steady state error at loop update instants. This filter has one zero near z = 1.0 for each integrator. The total number of poles of the filter is equal to the number of integrators plus two.

Simon, M.↗

Decoupled direct method for sensitivity analysis in combustion kinetics

An efficient, decoupled direct method for calculating the first order sensitivity coefficients of homogeneous, batch combustion kinetic rate equations is presented. In this method the ordinary differential equations for the sensitivity coefficients are solved separately from , but sequentially with, those describing the combustion chemistry. The ordinary differential equations for the thermochemical variables are solved using an efficient, implicit method (LSODE) that automatically selects the steplength and order for each solution step. The solution procedure for the sensitivity coefficients maintains accuracy and stability by using exactly the same steplengths and numerical approximations. The method computes sensitivity coefficients with respect to any combination of the initial values of the thermochemical variables and the three rate constant parameters for the chemical reactions. The method is illustrated by application to several simple problems and, where possible, comparisons are made with exact solutions and those obtained by other techniques.

Radhakrishnan, Krishnan↗

System design analyses of a rotating advanced-technology space station for the year 2025

Studies of an advanced technology space station configured to implement subsystem technologies projected for availability in the time period 2000 to 2025 is documented. These studies have examined the practical synergies in operational performance available through subsystem technology selection and identified the needs for technology development. Further analyses are performed on power system alternates, momentum management and stabilization, electrothermal propulsion, composite materials and structures, launch vehicle alternates, and lunar and planetary missions. Concluding remarks are made regarding the advanced technology space station concept, its intersubsystem synergies, and its system operational subsystem advanced technology development needs.

Queijo, M. J.↗

A generalized gamma(s)-family of self-starting algorithms for computational structural dynamics

A generalized gamma(s)-family of self-starting single-step formulations are presented in order to provide simplified yet effective dynamic attributes to include features towards eliminating the need to involve accelerations in the computational process for structural dynamic problems. By appropriately selecting the parameters pertaining to gamma(s)(s = 1, 2, 3), both explicit and implicit formulations are obtained. The stability and accuracy characteristics of the gamma(s)-family of representations are presented to validate the robustness of the formulations for structural dynamic problems. Numerous illustrative examples are described and the results are in excellent agreement and validate the applicability of these formulations for structural dynamic computations.

Namburu, Raju R.↗

Refine your search to explore more results.