Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALTIMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

The Fiber Optic System for the Advanced Topographic Laser Altimeter System (ATLAS) Instrument

The Advanced Topographic Laser Altimeter System (ATLAS) Instrument has been in integration and testing over the past 18 months in preparation for the Ice, Cloud and Land Elevation Satellite - 2 (ICESat-2) Mission, scheduled to launch in 2017. ICESat-2 is the follow on to ICESat which launched in 2003 and operated until 2009. ATLAS will measure the elevation of ice sheets, glaciers and sea ice or the "cryosphere" (as well as terrain) to provide data for assessing the earth's global climate changes. Where ICESat's instrument, the Geo-Science Laser Altimeter (GLAS) used a single beam measured with a 70 m spot on the ground and a distance between spots of 170 m, ATLAS will measure a spot size of 10 m with a spacing of 70 cm using six beams to measure terrain height changes as small as 4 mm. The ATLAS pulsed transmission system consists of two lasers operating at 532 nm with transmitter optics for beam steering, a diffractive optical element that splits the signal into 6 separate beams, receivers for start pulse detection and a wavelength tracking system. The optical receiver telescope system consists of optics that focus all six beams into optical fibers that feed a filter system that transmits the signal via fiber assemblies to the detectors. Also included on the instrument is a system that calibrates the alignment of the transmitted pulses to the receiver optics for precise signal capture. The larger electro optical subsystems for transmission, calibration, and signal receive, stay aligned and transmitting sufficiently due to the optical fiber system that links them together. The robust design of the fiber optic system, consisting of a variety of multi fiber arrays and simplex assemblies with multiple fiber core sizes and types, will enable the system to maintain consistent critical alignments for the entire life of the mission. Some of the development approaches used to meet the challenging optical system requirements for ATLAS are discussed here.

global climate changes↗
NASA NTRS2019

Land ice height-retrieval algorithm for NASA's ICESat-2 photon-counting laser altimeter

The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) and its sole scientific instrument, the Advanced Topographic Laser Altimeter System (ATLAS), was launched on 15 September 2018 with a primary goal of measuring changes in the surface of the Earth's land ice (glaciers and ice sheets). ATLAS is a photon-counting laser altimeter, which records the transit time of individual photons in order to reconstruct surface height along track. The ground-track pattern repeats every 91 days such that changes in ice sheet surface height can be estimated through time. In this paper, we describe the set of algorithms that have been developed for ICESat-2 to retrieve ice sheet surface height from the geolocated photons for the Land Ice Along-Track Height Product (ATL06), and demonstrate their output and performance using a synthetic dataset over various land-ice surfaces and under different cloud conditions. We show that the ATL06 algorithm is expected to perform at the level required to meet the ICESat-2 science objectives for land ice.

ICESat-2↗
NASA NTRS1971

Laser altimeter for Apollo lunar orbit.

The function of the altimeter is to provide precise measurements of Apollo vehicle height above known positions on the lunar surface. A short duration light pulse from the laser is directed through a telescope in a narrow beam to the lunar surface. A portion of the light is reflected by the moon back to the altimeter where it is intercepted by a receiving telescope and relayed to a detector. The time from the moment when the light pulse leaves the laser until its return, which is measured with the aid of a quartz crystal controlled clock oscillator, is a measure for the altitude.

Woodward, J. H.↗
NASA NTRS1972

Ground truth data requirements for altimeter performance verification

The amount and type of ground truth required for an altimeter experiment is a function of the uncertainty in the satellite orbit, the altimeter error budget and the type of operation being performed. Ground truth requirements will be discussed with reference to three areas of operation: the global mode, the high intensity mode and calibration.

Walsh, E. J.↗
NASA NTRS1974

Strategies for estimating the marine geoid from altimeter data

In processing altimeter data from a spacecraft borne altimeter to estimate the fine structure of the marine geoid, a problem is encountered. In order to describe the geoid fine structure, a large number of parameters must be employed and it is not possible to simultaneously estimate all of them. Unless the parameterization exhibits good orthogonality in the data, serious aliasing results. From simulation studies it has been found that amongst several competing parameterizations, the mean free air gravity anomaly model (i.e., Stokes' formula) exhibited promising geoid recovery characteristics. Using covariance analysis techniques, this report provides quantitative measures of the orthogonality properties associated with the above mentioned parameterization. It has been determined that a 5 deg x 5 deg area mean free air gravity anomaly can be estimated with an uncertainty of 1 mgal (40 cm undulation) provided that all free air gravity anomalies within a spherical radius of 10 arc degrees are simultaneously estimated.

Argentiero, P.↗
NASA NTRS1974

Engineering studies related to the GEOS-C radar altimeter

Experiment requirements, technical characteristics, and GEOS-C radar altimeter related analyses are discussed along with results of a study on engineering test data requirements. Statistical analyses related to determination of wave height resolution achievable as a function of system characteristics and averaging period are described, in addition to a discussion on the desirability of using computer procedures to compensate for altitude tracker time-jitter. Data processing considerations for the GEOS-C system are examined. An extensive analysis of the spatial filter effect is given and results of a computation of geoidal power spectral density, based on Skylab altimeter data, is displayed and interpreted in terms of projected GEOS-C random errors. This information is then used in deriving minimum-mean-square filter procedures for both geoid undulation and slope data. The characteristics of mean received waveforms as a function of off-nadir angle are used to obtain tracker bias as a function of sea state and pointing angle. The angle estimation process proposed by the GEOS-C hardware contractor is also investigated from a standpoint of achievable angular resolution.

Miller, L. S.↗
NASA NTRS1975

Detailed gravimetric geoid confirmation of short wavelength features of sea surface topography detected by the Skylab S-193 altimeter in the Atlantic Ocean

A detailed gravimetric geoid was computed for the Northwest Atlantic Ocean and Caribbean Sea area in support of the calibration and evaluation of the GEOS-C altimeter. This geoid, computed on a 15 ft. x 15 ft. grid was based upon a combination of surface gravity data with the GSFC GEM-6 satellite derived gravity data. A comparison of this gravimetric geoid with 10 passes of SKYLAB altimeter data is presented. The agreement of the two data types is quite good with the differences generally less than 2 meters. Sea surface manifestations of numerous short wavelength (approximately 100 km) oceanographic features are now indicated in the gravimetric geoid and are also confirmed by the altimetry data.

Marsh, J. G.↗
NASA NTRS1975

Noise characteristics of the Skylab S-193 altimeter altitude measurements

The statistical characteristics of the SKYLAB S-193 altimeter altitude noise are considered. These results are reported in a concise format for use and analysis by the scientific community. In most instances the results have been grouped according to satellite pointing so that the effects of pointing on the statistical characteristics can be readily seen. The altimeter measurements and the processing techniques are described. The mathematical descriptions of the computer programs used for these results are included.

Hatch, W. E.↗
NASA NTRS1976

On the recovery of gravity anomalies from high precision altimeter data

A model for the recovery of gravity anomalies from high precision altimeter data is derived which consists of small correction terms to the inverse Stokes' formula. The influence of unknown sea surface topography in the case of meandering currents such as the Gulf Stream is discussed. A formula was derived in order to estimate the accuracy of the gravity anomalies from the known accuracy of the altimeter data. It is shown that for the case of known harmonic coefficients of lower order the range of integration in Stokes inverse formula can be reduced very much.

Lelgemann, D.↗
NASA NTRS1976

Strategies for estimating the marine geoid from altimeter data

Altimeter data from a spacecraft borne altimeter was processed to estimate the fine structure of the marine geoid. Simulation studies show that, among several competing parameterizations, the mean free air gravity anomaly model exhibited promising geoid recovery characteristics. Using covariance analysis techniques, quantitative measures of the orthogonality properties are investigated.

Argentiero, P.↗
NASA NTRS1976

A radio altimeter antenna for a planetary probe

The design of a 400 MHz directional radio altimeter antenna for use in a freely falling probe in a planetary atmosphere is described. It is required that the antenna be physically large to exploit the dependence of the return power on the square of the wavelength. The antenna must be deployable so that it can be stowed behind the heat shield during the phase of atmospheric penetration. The electrical requirement, imposed by the power available and the system noise, is that the gain in the direction of the probe be at least 3 dB over a dipole. The altimeter application imposes the requirement of linear polarization. Dipole elements are impractical because of the proximity of the heat shield, hence monopole elements using the heat shield as an integral part (the ground plane) of the antenna are used. A parasitic element is placed behind the driven element to increase both the front-to-back ratio and the directive gain. The antenna which has been selected has a gain of 4 dB over a dipole, a front-to-back ratio of 8 dB, and a -6 dB beam angle of 34 degrees. Experiments for evaluating the effects of element spacing, length, and tilt angle with respect to the probe axis were conducted on a 1/25 scale model of the antenna at 10 GHz, and impedance measurements were performed on a full scale antenna at 400 MHz.

Beyer, J. B.↗
NASA NTRS1977

An atlas of 1975 GEOS-3 radar altimeter data for hurricane/tropical disturbance studies, volume 1

Geographic locations of 1975 hurricanes and other tropical disturbances were correlated with the closest approaching orbits of the GEOS-3 satellite and its radar altimeter. The disturbance locations and altimeter data were gathered for a seven-month period beginning with GEOS-3 launch in mid-April 1975. Areas of coverage were the Atlantic Ocean, the Carribean, the Gulf of Mexico, the west coast of the continental United States, and the central and western Pacific Ocean. Volume 1 contains disturbance coverage data for the Atlantic Ocean, Gulf of Mexico, and Eastern Pacific Ocean. Central and Western Pacific coverage is documented in Volume II.

Stanley, H. R.↗
NASA NTRS1977

Investigation of the applications of GEOS-3 radar altimeter data in remote sensing of land and sea features

A number of GEOS-3 passes over the Atlantic Ocean and Southeastern U.S. are examined. Surface-truth and radar altimeter data comparisons are given in terms of surface correlation length, signal fluctuation characteristics, and altitude tracker dynamic response. Detailed analyses are given regarding spatial resolution and its dependency on angular backscatter behavior. These analyses include data from passes over ocean (diffuse scatter), land (large body scatter), and mirror-like inland water areas (pseudo-specular scatter). Altimeter data are examined for a pass over a large reservoir and marsh area of differing water levels; this geometry represents a stepchange in altitude which is usable in determination of the transient response of the tracker. The extent to which pulse-length limited operation pertains over-land is examined. A Wiener filter altitude algorithm is discussed which permits specification of tracker variance and geoidal spectral characteristics during operation.

Miller, L. S.↗
NASA NTRS1976

Total attenuation measurements of the Intertropical Convergence Zone by satellite altimeter

The 13.9-GHz radar altimeter operating aboard Skylab detected incidences of intense attenuation during a passage over the Intertropical Convergence Zone (ITCZ). The signal returned to the instrument from the surface was reduced by 4.5 and 6 dB over two distinct meteorological disturbances near 8 deg N, 27.5 deg W. Although it is impossible to deduce the vertical composition of the ITCZ cloud band from these data, the usefulness of the radar altimeter as a meteorological sensor of total atmospheric attenuation is demonstrated.

Parsons, C. L.↗
NASA NTRS1977

Undulation and anomaly estimation using Geos-3 altimeter data without precise satellite orbits

Geos-3 altimeter data was used to obtain an approximate geoid undulation which was contaminated by long wavelength errors caused primarily by altimeter bias and orbit error. This error was reduced by fitting, with a low degree polynomial, the raw undulation data to the undulations implied by the GEM 7 potential coefficients in an adjustment process that included conditions on tracks that cross. These adjusted undulations were used to construct a geoid map in the Geos-3 calibration area using a least squares filter to remove the remaining noise in the undulations.

Rummel, R.↗
NASA NTRS1977

Ocean current surface measurement using dynamic elevations obtained by the GEOS-3 radar altimeter

Remote Sensing of the ocean surface from the GEOS-3 satellite using radar altimeter data has confirmed that the altimeter can detect the dynamic ocean topographic elevations relative to an equipotential surface, thus resulting in a reliable direct measurement of the ocean surface. Maps of the ocean dynamic topography calculated over a one month period and with 20 cm contour interval are prepared for the last half of 1975. The Gulf Stream is observed by the rapid slope change shown by the crowding of contours. Cold eddies associated with the current are seen as roughly circular depressions.

Leitao, C. D.↗
NASA NTRS1979

Optimization of satellite altimeter and wave height measurements

Two techniques for simultaneously estimating altitude, ocean wave height, and signal-to-noise ratio from the GEOS-C satellite altimeter data are described. One technique was based on maximum likelihood estimation, MLE, and the other on minimum mean square error estimation, MMSE. Performance was determined by comparing the variance and bias of each technique with the variance and bias of the smoothed output from the Geos altimeter tracker. Ocean wave height tracking performance for the MLE and MMSE algorithms was measured by comparing the variance and bias of the wave height estimates with that of the expression for the return waveform obtained by a fit to the average output of the 16 waveform sampling gates.

Dooley, R. P.↗
NASA NTRS1979

Analysis of GEOS-3 altimeter data and extraction of ocean wave height and dominant wavelength

When the amplitude and timing biases are removed from the GEOS-3 Sample and Hold (S&H) gates, the mean return waveforms can be excellently fitted with a theoretical template which represents the convolution of: (1) the radar point target response; (2) the range noise (jitter) in the altimeter tracking loop; (3) the sea surface height distribution; and (4) the antenna pattern as a function of the range to mean sea level. Several techniques of varying complexity to remove the effect of the tracking loop jitter in computing the wave height are considered. They include: (1) realigning the S&H gates to their actual positions with respect to mean sea level before averaging; (2) using the observed standard deviation on the altitude measurement to remove the integrated effect of the tracking loop jitter, and (3) using a look-up table to correct for the expected value of range noise. Analysis of skewness in the GEOS return waveform demonstrates the potential of a satellite radar altimeter to determine the dominant wavelength of ocean waves.

Walsh, E. J.↗