Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASME Code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Failure Analysis for Molten Salt Thermal Energy Storage Tanks for In-Service CSP Plants

Thermal Energy Storage (TES) is a fundamental component in concentrating solar power (CSP) plants to increase the plant's dispatchability, capacity factor, while reducing the levelized cost of electricity. In central receivers CSP plants, nitrate molten salts have been used for several years for operation temperatures of up to 565 degrees C. Despite many efforts to advance nitrate salt to higher operation temperatures (even considering a replacement with molten chloride salts) to achieve higher energy conversion efficiencies, the 565 degrees C temperature is currently considered the state-of-the art. Although molten salt tanks have been broadly deployed in commercial CSP plants worldwide, several failures have been reported in these tanks after a few months or years of operation, causing significant economic loss and mistrust in CSP technologies. Most of these failures are associated with the infancy of the technology and multiple issues related to tank design, fabrication, commissioning, and aggressive operation. A technical standard dedicated to the design and fabrication of molten nitrate TES tanks does not exist today. Current in-service molten salt tanks have been generally designed based on the American Petroleum Institute's (API) 650 and ASME Section II standards. The API 650 code provides guidelines for dimensions and fabrication for oil storage tanks up to 260 degrees C. The ASME standard provides allowable stress values for various materials at a range of temperatures and conditions. Both standards seem to be limited for molten salt TES tanks where high temperatures, thermal cycling, and transient conditions are expected. In 2020, NREL released the Concentrating Solar Power Best Practices Study (NREL/TP-5500-75763) that summarized multiple issues in CSP plants, along with potential alternatives and recommendations to address those issues based on information collected from participants representing about 80% of operating CSP plants in the world. One of the recommendations from this study was the development of accurate and validated models to evaluate the plant's transient operation, capable of capturing the effect of short-term clouds and operator response, while being flexible in being adapted to various spatial and temporal resource data. The "Failure Analysis for Molten Salt Thermal Energy Tanks for In-Service CSP Plants" project was inspired on this recommendation and was focused on (1) the development and validation of a physics-based model for a representative, commercial-scale molten salt tank, (2) performing simulations to evaluate the behavior of the tank as a function of typical plant operation conditions, (3) understanding tank failures mechanisms, (4) determining the residual stress and distortion in the tank floor after welding fabrication and evaluating their impact in the stresses developed in the tank during operation, (5) assessing the impact of key operation parameters on the temperature and stress distribution, (6) conduct a preliminary evaluation of design features to reduce stress and improve tank's reliability, and (7) estimate the tank's service life based on the stress developed under diverse operation scenarios. From the analysis conducted in the project and presented in this report, it was found that maximum stresses surpassing the yield strength point of the stainless steel (SS) 347H are developed on the tank floor near the perimeter. These large stresses are strongly influenced by the initial residual stresses and distortion of the tank floor after welding fabrication. During operation, large stresses are developed in the tank floor at high operation temperatures with large salt inventory levels during transient operation. High stresses are also related to elevated temperature gradients in the tank floor that could be attributed to insufficient mixing within the salt inflow and the salt inventory. Based on the analysis, creep is the predominant failure mechanism. However, the large stress levels could favor the plastic deformation into buckles, and crack formation due to stress relaxation cracking during cycle operation. A lifetime below 3 years was estimated for the typical plant operation conditions and a specific initial residual stress and deformation distribution of the tank floor. The estimated life agrees with the service time to failure reported in several commercial molten salt tanks. Desing and operation guidelines can be extracted from the analysis presented in this report, which could be adopted by tank manufacturers and CSP operators to advance toward an ultimate solution for tank failures by reducing residual and operational stresses to achieve a tank service life of more than 30 years. Addressing failures in molten salt TES tanks is fundamental for the CSP industry's survivability, but it is also important for other industrial and power generation applications using this technology, including nuclear and concentrating solar thermal.

14 SOLAR ENERGY↗
DOE OSTI2019

Evaluating and modeling rate sensitivity in advanced reactor structural materials: 316H, Gr. 91, and A617

Advanced reactor systems operate at high temperatures to achieve better thermal efficiency. During transients from lower temperatures to high operating temperatures structural metals transition from rate insensitive behavior to rate dependent behavior. In the rate dependent regime creep and plastic deformation are not separable hence requiring a unified treatment with a viscoplastic model. Several bounding design methods in the ASME Boiler and Pressure Vessel Code, Section III, Division 5, Subsection HB, Subpart B assume a decoupled treatment of creep and plasticity so establishing the boundary of the rate insensitive regimes for advanced reactor structural materials is necessary to set limits for the use of these bounding design methods. In the rate sensitive regime new bounding methods or fully inelastic analysis are required for the design of Division 5 Class A components. During temperature transients these components may operate in both the rate insensitive and rate sensitive regions, requiring computational models that can represent both types of behavior. This work establishes criteria for material rate sensitivity and develops a new composite method for modeling constitutive response in both the rate sensitive and rate insensitive regimes for three Division 5, Class A materials: 316H austenitic stainless steel, Grade 91 ferritic-martensitic steel, and Alloy 617, a nickel-based alloy. Both the criteria and new modeling strategy apply the concept of a normalized activation energy for thermally activated mechanisms developed by Kocks, Mecking, and co-workers. Specifically, this work quantifies the average rate sensitivity of the three materials from an experimental database collected from the literature. Additionally, this work develops rate sensitivity criteria and a complete model for each material that can transition between both deformation regimes and provides several example simulations demonstrating the accuracy of the models and the numerical performance of the composite modeling method.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A method for predicting failure statistics for steady state elevated temperature structural components

This paper presents the initial development of a high temperature life prediction method that accounts for the variability in the material properties of Grade 91 steel. The method accounts for material variability by fitting a variable 3-parameter Weibull distribution to experimental rupture data and accounts for the variability of creep deformation on the steady-state stresses via a Monte Carlo approach. To ensure reasonable computational times, the model represents the material as an extremely viscous Stokes fluid with a non-Newtonian viscosity, therefore solving the stress relaxation problem with a steady, static, instead of transient, analysis. Furthermore, the complete statistical analysis combines this model for creep deformation with a probabilistic model for creep rupture to evaluate the probability of premature failure for a set of sample problems, comparing the predicted failure statistics to the design life predicted by the ASME Boiler and Pressure Vessel Code rules.

42 ENGINEERING↗
DOE OSTI2022

Machine learning for ultrasonic nondestructive examination of welding defects: A systematic review

Recent years have seen a substantial increase in the application of machine learning (ML) for automated analysis of nondestructive examination (NDE) data. One of the applications of interest is the use of ML for the analysis of data from in-service inspection of welds in nuclear power and other industries. These types of inspections are performed in accordance with criteria described in the ASME Boiler and Pressure Vessel Code and require the use of reliable NDE techniques. The rapid growth in ML methods and the diversity of possible approaches indicate a need to assess the current capabilities of ML and automated data analysis for NDE and identify any gaps or shortcomings in current ML technologies as applied to the automated analysis of NDE data. In particular, there is a need to determine the impact of ML on the NDE reliability. This paper discusses the findings from a literature survey on the current state of ML for the automated analysis of data from ultrasonic NDE of weld flaws. It discusses an overview of ultrasonic NDE as used for weld inspections in nuclear power and other industries. Herein, data sets and ML models used in the literature are summarized, along with a generally applicable workflow for ML. Findings on the capabilities, limitations and potential gaps in feature selection, data selection, and ML model optimization are discussed. The paper identified several needs for quantifying and validating the performance of ML methods for ultrasonic NDE, including the need for common data sets.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Detection of ratcheting in finite element calculations

The distinction between a ratcheting and non-ratcheting response is critical for many high temperature design methods. Non-ratcheting is generally considered safe deformation remain bounded over the lifetime of the component while ratcheting is undesirable. As a particular example, the elastic perfectly plastic (EPP) design methods described in recent ASME Section III, Division 5 code cases require a designer to distinguish ratcheting from non-ratcheting for finite element analyses using a relatively simple, elastic perfectly-plastic constitutive response. However, it can be quite difficult to distinguish these two deformation regimes using finite element (FE) analysis particularly in the case where the actual ratcheting strain is small. In practice FE analysis of structures that are analytically in either the plastic shakedown or ratcheting regimes will result in small, cycle to -cycle accumulated strains characteristic of ratcheting. Distinguishing false ratcheting the structure is actually in the plastic shakedown regime from true ratcheting can be challenging. We describe the characteristics of nonlinear FE analysis that cause these false ratcheting strains and describe practical methods for distinguishing a ratcheting from a non-ratcheting response.

Messner, M. C.↗
DOE OSTI2019

Establishing temperature upper limits for the ASME Section III, Division 5 design by elastic analysis methods

ection III, Division 5 of the ASME Boiler and Pressure Vessel Code provides two broad paths for the design of high temperature, safety-critical nuclear components: design by elastic analysis and design by inelastic analysis. The design by elastic analysis approach, as the name suggests, uses a linear elastic stress analysis of the component and applies design rules designed to bound response of the actual structure, which will undergo both creep and plasticity. Currently, the Code allows the use of the elastic approach for all operating temperatures up to the maximum use temperatures in the Code. The bounds used in the elastic approach assume an uncoupled material response combining rate dependent creep with rate independent plasticity. However, at elevated temperatures creep and plasticity are coupled, rate dependent mechanisms and so the elastic analysis rules may become non-conservative. We present several examples of potential non-conservatism in the elastic analysis rules at high operating temperatures. Then we describe a systematic method for determining a temperature cutoff describing the transition from non-unified, rate independent plasticity material response to a rate dependent, unified plastic response. Logically, this transition temperature sets the upper bound for the allowable, conservative use of the design by elastic analysis approach and so we propose these temperatures, determined for all the Section III, Division 5 Class A materials, as Code limits for the applicability of the elastic approach.

Messner, M. C.↗
DOE OSTI2019

Welding Process Development for Spent Nuclear Fuel Canister Repair

The potential for stress corrosion cracking (SCC) of welded stainless-steel interim storage containers for spent nuclear fuel (SNF) has been identified as a high priority data gap. This paper presents a fusion welding process that was developed for SNF canister repair. Submerged arc welding (SAW) was developed to weld 12.7 mm (0.5 in.) thick 304L stainless steel plates to simulate the initial welds on SNF canisters. The SAW procedure was qualified following ASME Boiler and Pressure Vessel Code requirements. During SAW, the welding temperature was recorded at various locations by using thermocouples. After SAW, weld microstructures were characterized, joint mechanical properties were tested, and the maximum tensile residual stress direction was identified. After SAW procedure qualification, artificial cracks were excavated perpendicular to the maximum tensile residual stress direction in the SAW heat affected zone. Machine cold-wire gas tungsten arc welding (CW-GTAW) was developed and used for repair welding at cracked locations.

Tang, Wei↗
DOE OSTI2020

Structural Analysis Approach for the Defense Programs Package 3 (DPP-3)

The Pacific Northwest National Laboratory (PNNL) is the design authority for a new Type B hazardous materials transportation package designated as the Defense Programs Package 3 (DPP-3) for the U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA). The DPP-3 has been developed using similar materials and fabrication methods employed in previous U.S. Nuclear Regulatory Commission (NRC), DOE, and NNSA certified packages. The DPP-3 design criteria are derived from the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC), NNSA guidance and NRC regulatory guides in order to safely and securely transport a variety of payloads. Final regulatory approval by the NNSA will require physical testing to demonstrate that the containment vessel (CV) remains leaktight after enduring the entire regulatory testing sequence prescribed in Title 10 of the Code of Federal Regulations Part 71 (10 CFR 71). In order to gain confidence that the DPP-3 will remain leaktight after testing, the DPP-3 has been structurally analyzed using the Finite Element Analysis (FEA) software LS-DYNA. The FEA analyses serve two general purposes: first, they aid in design and development of the package, and second, they advise as to which drop orientations are expected to cause the most damage during regulatory testing. This paper will discuss how the design criteria are incorporated into analytical techniques needed to evaluate the FEA structural simulation results for 10 CFR 71 conditions to give confidence the DPP-3 testing campaign will be successful.

Sakalaukus Jr., Peter J.↗
DOE OSTI2024

STRUCTURAL MODELING TO SUPPORT POST-YIELD ACCEPTANCE CRITERIA FOR SPENT NUCLEAR FUEL CLADDING

Spent nuclear fuel (SNF) is evaluated for structural failure during storage and transportation scenarios. The U.S. Department of Energy’s Spent Fuel and Waste Science and Technology (SFWST) program has sponsored significant research in quantifying mechanical loads on SNF during storage and transportation scenarios using experimental and modeling methods. The SFWST program has also performed significant research on measuring the mechanical behavior of irradiated SNF as defueled cladding segments and cladding with fuel pellets to measure composite behavior. This paper considers some of the key material data from the Sibling Pin testing and uses structural modeling and analysis methods that have been informed by testing to consider post-yield acceptance criteria for SNF cladding structural analysis. Test data published by Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) are the foundation for informing the material behavior of the models developed in this study. In particular, four-point bend (4PB) tests of fueled and defueled cladding segments provide significant information about the bending failure mode of SNF. ORNL’s 4PB test data is on fueled cladding segments, so the composite behavior of SNF is demonstrated. This paper describes PNNL’s coincident beam model that was developed to approximate the composite behavior of SNF. This paper also presents PNNL’s structural dynamic finite element models of a cask tip-over scenario, which is predicted to cause the strongest mechanical loads on SNF of all postulated storage and transportation scenarios. SNF bending loads predicted in the cask tip-over scenario and cladding acceptance criteria beyond yield are considered, with justification based on the Sibling Pin test data. ASME Boiler and Pressure Vessel code stress intensity limits are also considered. The ultimate goal of this work is to aid in the justification of structural acceptance criteria for SNF cladding beyond the cladding’s irradiated yield strength for use in structural analysis of all storage and transportation scenarios.

Klymyshyn, Nicholas A.↗
DOE OSTI2018

Notch Effects on the Short Term Rupture Properties of Alloy 617 Base Metal and Weldments

Alloy 617 is currently undergoing approval for inclusion in the ASME Boiler and Pressure Vessel Code in Section III Division 5 for use in high temperature nuclear reactors. Prior to use in construction of these reactors, however, it must be approved by the Nuclear Regulatory Commission. Several concerns relating to the effects of geometric discontinuities, such as notches and multi-axial stress states (as opposed to uniaxial stress states typically present in laboratory run creep tests), must first be addressed. Alloy 617 has been found to be notch-strengthening in short term (1000-2500 hour) creep testing for both base metal and weld metal and will fail preferentially in a straight gauge section rather than at a sharp notch, provided that the applied stresses are similar in both the straight gauge and notch sections. Additionally, specimens designed with semi-circular notches (or U notches, as they are referred to in this report) to impose multi-axial stress states on the specimen during creep-testing were found to either maintain similar creep-rupture-lives as uniaxial stress specimens tested at similar conditions, or have creep-rupture-lives that were significantly longer. This work shows that notches and multi-axial stress states do not appear to raise concerns with relation to the use of design rules created for Alloy 617 using smooth, straight-gauge test specimens and uniaxial creep tests.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Fundamental Understanding of Creep-Fatigue Interactions in 9Cr-1MoV Steel Welds. Final Report

Ferritic-martensitic steels constitute a vital class of materials for current and future generation of nuclear reactors as well as ultra supercritical coal fired power plants due to their superior creep resistant properties. One particular ferritic-martensitic steel, 9Cr-1MoV (Grade 91) is one of five materials approved for high temperature use in nuclear service by the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC). Grade 91 is also a candidate material for proposed fission and fusion reactors such as the sodium cooled fast reactor (SFR). In service, Grade 91 components can be subjected to elevated temperatures and cyclic stresses, leading to the accumulation of creep-fatigue (CF) damage. While the monotonic creep properties of Grade 91 steels have been studied extensively, there is less knowledge concerning the mechanisms governing CF damage of this steel in the creep-dominated failure region. Moreover, the creep failure is especially pronounced in welded Grade 91 components, which are commonly joined using conventional arc welding techniques such as flux-cored arc welding (FCAW). In a Grade 91 weld, the creep failure typically occurs in the outer region of the heat affected zone (HAZ), specifically in the intercritical or fine-grained heat-affected zone (ICHAZ or FGHAZ), a phenomenon known as type IV failure. Currently, there exists a limited knowledge of CF damage mechanisms in Grade 91 welds. Improving the mechanistic understanding of the CF damage and failure of Grade 91 steel and its welds with inhomogeneous microstructure is crucial for the safety and design of key structural components in advanced, high-temperature reactors. The overall objectives of the project were to advance the state of knowledge and understanding of CF damage in both Grade 91 base metal and its welds, especially under loading conditions where creep is the dominant damage mechanism. Uncovering the mechanisms governing the creep-fatigue deformation and damage in Grade 91 base metal in creep-dominated region as well as type IV failure in Grade 91 welds contributes to a new knowledge that may lead to more accurate life prediction models than those currently in use. Moreover, the superior CF properties obtained by low heat input welding has a high potential to develop practical solutions to the premature failure of Grade 91 weld.

36 MATERIALS SCIENCE↗
DOE OSTI2018

NSRD-12, Novel Mini-Tubular HEPA Media for Nuclear Facility Ventilation Systems

The overall goal is to improve safety of DOE nuclear facilities during fire scenarios by developing improved filtration technology, increasing performance while reducing pressure drop. Ceramic filtration technology can provide robust, passive mitigation against radiological releases.The primary objective of this report is to demonstrate that mini-tubular ceramic (MTC) media can reduce pressure drop across a filter compared to flow through a membrane. A secondary objective is to obtain a baseline filtration efficiency measurement. Reducing pressure drop across a filter through MTC design can be combined with nanofiber technology to improve filter performance. Developing MTC media can also solve processing challenges associated with manufacturing ceramic nanofiber membranes and coatings by electrospinning. This work will support developing specifications for industry codes and standards such as ASME AG-1, Subsection FO, Ceramic Filters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Gear Test Assembly - Status Report FY2018

The gear test assembly completed testing in air and distilled water successfully under a range of loading conditions. An external torque sensor assembly was designed and added to confirm the torque readings provided by the Parker control system. Hand calculations were performed to determine the time range that the heaters could be turned on without exceeding the ASME Boiler and Pressure Vessel code Fatigue Stress Limits for 1,000,000 cycles. Transient computational fluid dynamics analyses were performed to determine the heater cycle on/off time. Steady state computational fluid dynamics analyses were performed to determine the final temperature distribution throughout the insulated assembly using a thinner but more effective insulation configuration. The initial heating tests were completed (without insulation installed) to check the heater control system. Testing of the argon pressurized seal chambers were performed and indicated the need for re-machining of several components to eliminate some leaks. Nondestructive examination of the gears continued successfully using eddy current and ultrasonic inspection techniques.

42 ENGINEERING↗
DOE OSTI2019

Inelastic analysis procedure based on the Grade 91 unified viscoplastic constitutive model for ASME implementation

This report describes a design by inelastic analysis procedure for Grade 91 to be proposed for incorporation in the ASME Boiler and Pressure Vessel Code. The package of proposed additions includes guidance on inelastic modeling and a reference constitutive model for Grade 91 to be used with the existing Section III, Division 5, Subsection HB, Subpart B rules for design by inelastic analysis. The current Code specifies acceptance criteria for design by inelastic analysis but does not provide an acceptable constitutive model for Grade 91 or any of the other Class A materials. The proposed Nonmandatory Appendix would provide such a reference model, greatly easing the use of design by inelastic analysis. As the inelastic methods produce significantly less overconservative designs than the design by elastic analysis rules this proposed Code change could reduce the design and fabrication cost of future high temperature reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Development of a multiaxial deformation measure and creep-fatigue damage summation for multiple load cycle types in support of an improved creep-fatigue design method

This report describes methods for extending the elastic perfectly plastic (EPP) simplified model test (SMT) approach to cover multiaxial load conditions and methods to combine EPP+SMT use fractions for multiple loading cycles. The completion of this work, in conjunction with companion reports on constructing and validating SMT design curves, marks the development of a complete methodology for assessing creep-fatigue damage in high temperature nuclear reactor structural components. This EPP+SMT method aims to better account for elastic follow up effects, simplify the design process, and reduce overconservatism when compared to current simplified bounding approaches in the ASME Boiler and Pressure Vessel Code Section III, Division 5, Subsection HB, Subpart B covering high temperature nuclear reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Initial development of a high temperature life prediction method directly accounting for variability in material properties

This report presents the initial development of a life prediction method that accounts for the variability of the material properties in Grade 91 steel. We account for material variability by both fitting a variable 3-parameter Weibull distribution to the rupture data of the material and by quantifying the effect that the creep deformation properties have on stresses via a Monte Carlo approach. To ensure a reasonable time frame when applying Monte Carlo to the creep stress, we propose a methodology that models the material as an extremely viscous Stokes flow with a non-Newtonian viscosity, therefore solving the problem in a single step. We use the final probabilistic model for structural failure developed in this document to evaluate a Flat Head Vessel designed with the Section III, Division 5 ASME Boiler Pressure and Vessel Code rules with a 100,000h design life and assess its probability of premature failure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Initial development for the introduction of provisions for irradiation effects in Division 5 rules

Heat pipe microreactor concept involves the use of a solid core block to encapsulate the nuclear fuel and the passive extraction of heat from the core block to the heat exchanger block by advanced heat pipes. The core block is a key component of the heat pipe microreactor design. It integrates the functions of reactor vessel, core structural components and fuel cladding of traditional Gen IV advanced reactor designs into one single structure. The effects of irradiation on the structural failure modes are outside the scope of the rules of the ASME Boiler and Pressure Vessel Code, Section III, Division 5, Subsection HB, Subpart B for metallic Class A components. Methods to account for the irradiation effect were investigated in order to develop design methods that can be applied to the core block design in the heat pipe microreactor. This report presents an initial development of an approach to account for the irradiation effects in the design rules.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Nimble Feedthrough Qualification - 125% High Explosive Overpressure Test Plan RevA

The primary purpose of this High Explosive (HE) Over-Pressure Test (OPT) is to qualify top cover diagnostic feedthroughs that will be used on LLNL Nimble Subcritical Experiment (SCE) Series designs per experimental design verification requirements specified in ASME Boiler and Pressure Vessel Code Case 2564, Impulsively-Loaded Pressure Vessels, Section VIII, Division 3; and to satisfy the over-test requirement of DOE-STD-1212. The diagnostic feedthroughs are part of the Vessel Confinement System (VCS), which is credited as a Safety Significant Design Feature per the U1a Facility Documented Safety Analysis (DSA). The OPT will be conducted at the LANL Area 1, R306 Firing Site (TA-15-R306) in a 3-foot diameter VCS depicted in Figure 1.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗