Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accretion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Large-Drop Ice Accretion Test Results for a Large Scale Swept Wing Section

In-flight icing is an important consideration that affects aircraft design, performance and safety. Newer regulations combined with increasing demand to reduce fuel burn, emissions and noise are driving a need for improvements in icing simulation capability. To that end, this paper presents the results of ice accretion testing conducted in the NASA Icing Research Tunnel on a large swept wing typical of a modern commercial transport. The model was based upon a section of the Common Research Model wing at the 64% semispan station with a streamwise chord length of 136 in. The test conditions were developed with an icing scaling analysis to generate similar conditions for a small MVD = 25 μm and a large MVD = 110 μm. A series of tests were conducted over a range of total temperature from -23.8 ˚C to -1.4 ˚C with all other conditions held constant. The results for the small MVD cloud conditions were consistent with previous work and showed the changing ice morphology from rime ice at colder temperatures to highly 3D scallop ice in the range of -8.7 ˚C to -3.8 ˚C. The results for the large MVD cloud conditions exhibited some differences in the ice accretion morphology. Scallop-like ice features were observed at total temperature of -3.8˚C. The large MVD ice accretion at lower temperatures tended to be smoother than the corresponding ice accretion for small MVD. The thickness of the main ice shape tended to be larger for the small MVD conditions compared to the corresponding large MVD ice shape while the latter had more ice farther downstream. The measured ice mass was approximately equal between the corresponding small and large MVD ice shapes up to a freezing fraction of 0.6. For higher freezing fraction, the large MVD ice shapes weighed more. Cloud MVD variation from 50 μm to 230 μm while holding the scaling parameters constant resulted in very minor differences in the ice shapes, mostly in the upper and lower surface chordwise extents. Ice volume was computed from 3D scan data and used to calculate a ratio of ice mass to volume. The resulting values were in the range of 240 to 455 Kg/m3. While this is consistent with analogous values previously reported in the literature, more data are needed to determine a specific trend in this ratio as a function of freezing fraction and the corresponding governing physical phenomena. This work has resulted in a significant experimental database of ice accretion for small and large MVD conditions applicable to large-scale swept wings.

Icing↗
NASA NTRS2021

Preventing Anomalous Torques in Circumbinary Accretion Simulations

Numerical experiments are the primary method of studying the evolution of circumbinary disks due to the strong nonlinearities involved. Many circumbinary simulations also require the use of numerical mass sinks: source terms that prevent gas from unphysically accumulating around the simulated point masses by removing gas at a given rate. However, special care must be taken when drawing physical conclusions from such simulations to ensure that results are not biased by numerical artifacts. We demonstrate how improved sink methods reduce some of these biases, using simulations of aspect ratio 0.1 accretion disks around binaries with mass ratios between 0.1 and 1. We show that sink terms that do not reduce the angular momentum of gas relative to the accreting object (1) reduce the dependence on the sink rate of quantities such as the torque on the binary, distribution of accretion between binary components, and evolution of the binary semimajor axis; (2) reduce the degree to which the sink rate affects the structure of the accretion disks around each binary component; (3) alter the variability of accretion onto the binary, regularizing it in time. We also investigate other potential sources of systematic error, such as gravitational softening and simplifications to the viscous stress tensor. Because of the strong dependence of binary orbital evolution on both the torque and the distribution of mass between binary components, the sink method influences the orbital evolution of the binary at all mass ratios, with mass ratios below ∼0.3 most affected.

Alexander Dittmann↗
NASA NTRS2021

Spin and Accretion Rate Dependence of Black Hole X-Ray Spectra

We present a survey of how the spectral features of black hole X-ray binary systems depend on spin, accretion rate, viewing angle, and Fe abundance when predicted on the basis of first-principles physical calculations. The power-law component hardens with increasing spin. The thermal component strengthens with increasing accretion rate. The Compton bump is enhanced by higher accretion rate and lower spin. The Fe Kα equivalent width grows sublinearly with Fe abundance. Strikingly, the Kα profile is more sensitive to accretion rate than to spin because its radial surface brightness profile is relatively flat, and higher accretion rate extends the production region to smaller radii. The overall radiative efficiency is at least 30%–100% greater than as predicted by the Novikov–Thorne model.

Brooks E Kinch↗
DOE OSTI2023

X-ray emission from a rapidly accreting narrow-line Seyfert 1 galaxy at z = 6.56

The space density of X-ray-luminous, blindly selected active galactic nuclei (AGN) traces the population of rapidly accreting super-massive black holes through cosmic time. It is encoded in the X-ray luminosity function, whose bright end remains poorly constrained in the first billion years after the Big Bang as X-ray surveys have thus far lacked the required cosmological volume. With the eROSITA Final Equatorial-Depth Survey (eFEDS), the largest contiguous and homogeneous X-ray survey to date, X-ray AGN population studies can now be extended to new regions of the luminosity–redshift space (L 2 - 10 keV > 10 45 erg s -1 and z > 6). The current study aims at identifying luminous quasars at z > 5.7 among X-ray-selected sources in the eFEDS field in order to place a lower limit on black hole accretion well into the epoch of re-ionisation. A secondary goal is the characterisation of the physical properties of these extreme coronal emitters at high redshifts. Cross-matching eFEDS catalogue sources to optical counterparts from the DESI Legacy Imaging Surveys, we confirm the low significance detection with eROSITA of a previously known, optically faint z = 6.56 quasar from the Subaru High-z Exploration of Low-luminosity Quasars (SHELLQs) survey. We obtained a pointed follow-up observation of the source with the Chandra X-ray telescope in order to confirm the low-significance eROSITA detection. Using new near-infrared spectroscopy, we derived the physical properties of the super-massive black hole. Finally, we used this detection to infer a lower limit on the black hole accretion density rate at z > 6. The Chandra observation confirms the eFEDS source as the most distant blind X-ray detection to date. The derived X-ray luminosity is high with respect to the rest-frame optical emission of the quasar. With a narrow MgII line, low derived black hole mass, and high Eddington ratio, as well as its steep photon index, the source shows properties that are similar to local narrow-line Seyfert 1 galaxies, which are thought to be powered by young super-massive black holes. In combination with a previous high-redshift quasar detection in the field, we show that quasars with L 2 - 10 keV > 10 45 erg s -1 dominate accretion onto super-massive black holes at z ~ 6.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Fundamental differences in the properties of red and blue quasars: measuring the reddening and accretion properties with X-shooter

ABSTRACT We have recently found fundamental differences in the radio properties of red quasars when compared to typical blue quasars. In this paper, we use data from the X-shooter spectrograph on the Very Large Telescope, providing spectral coverage from ∼3000–$25\,000\,$ Å, of a sample of 40 red and blue luminous quasars at 1.45 < z < 1.65 to explore the connections between the radio, emission-line, and accretion-disc properties. We fit various dust-extinction curves to the data and find that dust reddening can fully explain the observed colours for the majority of the red quasars in our sample, with moderate extinctions ranging from AV ∼ 0.06–0.7 mag. We confront our spectra with a simple thin accretion-disc model and find this can describe the continua of both the blue and red quasars, once corrected for dust extinction; we also find no significant differences in the accretion properties. We detect ionized outflows in a number of red and blue quasars, but do not find any significant evidence that they are more prevalent in the red quasar population. Overall our findings imply that the radio emission is more closely connected to circumnuclear/ISM opacity rather than accretion disc or outflow differences.

Fawcett, V. A. (ORCID:000000031251532X)↗
DOE OSTI2023

What sets the splashback radius of dark matter haloes: accretion history or other properties?

The density profiles of dark matter haloes contain rich information about their growth history and physical properties. One particularly interesting region is the splashback radius, R sp , which marks the transition between particles orbiting in the halo and particles undergoing first infall. While the dependence of R sp on the recent accretion rate is well-established and theoretically expected, it is not clear exactly what parts of the accretion history R sp responds to, and what other halo properties might additionally influence its position. Here, we comprehensively investigate these questions by correlating the dynamically measured splashback radii of a large set of simulated haloes with their individual growth histories as well as their structural, dynamical, and environmental properties. We find that R sp is sensitive to the accretion over one crossing time but largely insensitive to the prior history (in contrast to concentration, which probes earlier epochs). All secondary correlations are much weaker, but we discern a relatively higher R sp in less massive, older, more elliptical, and more tidally deformed haloes. Despite these minor influences, we conclude that the splashback radius is a clean indicator of a halo’s growth over the past dynamical time. We predict that the magnitude gap should be a promising observable indicator of a halo’s accretion rate and splashback radius.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Primordial black holes and their mass spectra: The effects of mergers and accretion within stasis cosmologies

A variety of processes in the very early Universe can give rise to a population of primordial black holes (PBHs) with an extended mass spectrum. For certain mass spectra of this sort, it has been shown that the evaporation of these PBHs into radiation can drive the universe toward an epoch of cosmological stasis which can persist for a significant number of 𝑒-folds of cosmological expansion. However, in general, the initial mass spectrum which characterizes a population of PBHs at the time of production can subsequently be distorted by processes such as mergers and accretion. Here, in this paper, we examine the effects that these processes have on the spectra that lead to a PBH-induced stasis. Within such stasis models, we find that mergers have only a negligible effect on these spectra within the regime of interest for stasis. We likewise find that the effect of accretion is negligible in many cases of interest. However, we find that the effect of accretion on the PBH mass spectrum is non-negligible in situations in which this spectrum is particularly broad. In such situations, the stasis epoch is abridged or, in extreme cases, does not occur at all. Thus accretion plays a nontrivial role in constraining the emergence of stasis within scenarios which lead to extended PBH mass spectra.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Dark magnetohydrodynamics: Black hole accretion in superradiant dark photon clouds

Black holes threaded by massive vector fields can be subject to a superradiant instability, growing a cloud of massive vector particles around it. In this work, we consider what happens if such a dark matter candidate field mimicking a dark photon interacts with an accretion flow onto the black hole. By including a kinetic mixing term with the standard model photon, we extend the commonly used equations of general-relativistic magnetohydrodynamics to a dark photon constituent. The coupling to the dark photon then appears as an effective dynamo term together with a dark Lorentz force acting on the accreting matter. We numerically study the interactions between the superradiant dark photon cloud and the inner accretion flow by solving the coupled system in full numerical relativity. By parameterically varying the mixing parameter between the dark and standard model sector, we provide a first investigation of how the accretion flow could be modified. In conclusion, depending on the coupling strength, our solutions exhibit increased wind launching, as well as oscillation modes in the disk.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Jets with a Twist: The Emergence of FR0 Jets in a 3D GRMHD Simulation of Zero-angular-momentum Black Hole Accretion

Abstract Spinning supermassive black holes (BHs) in active galactic nuclei magnetically launch relativistic collimated outflows, or jets. Without angular momentum supply, such jets are thought to perish within 3 orders of magnitude in distance from the BH, well before reaching kiloparsec scales. We study the survival of such jets at the largest scale separation to date, via 3D general relativistic magnetohydrodynamic simulations of rapidly spinning BHs immersed into uniform zero-angular-momentum gas threaded by a weak vertical magnetic field. We place the gas outside the BH sphere of influence, or the Bondi radius, chosen to be much larger than the BH gravitational radius, R B = 10 3 R g . The BH develops dynamically important large-scale magnetic fields, forms a magnetically arrested disk (MAD), and launches relativistic jets that propagate well outside R B and suppress BH accretion to 1.5% of the Bondi rate, M ̇ B . Thus, low-angular-momentum accretion in the MAD state can form large-scale jets in Fanaroff–Riley (FR) type I and II galaxies. Subsequently, the disk shrinks and exits the MAD state: barely a disk (BAD), it rapidly precesses, whips the jets around, globally destroys them, and lets 5%–10% of M ̇ B reach the BH. Thereafter, the disk starts rocking back and forth by angles 90°–180°: the rocking accretion disk (RAD) launches weak intermittent jets that spread their energy over a large area and suppress BH accretion to ≲2% M ̇ B . Because the BAD and RAD states tangle up the jets and destroy them well inside R B , they are promising candidates for the more abundant, but less luminous, class of FR0 galaxies.

Astronomy & Astrophysics↗
DOE OSTI2023

Radiation Transport Two-temperature GRMHD Simulations of Warped Accretion Disks

In many black hole (BH) systems, the accretion disk is expected to be misaligned with respect to the BH spin axis. If the scale height of the disk is much smaller than the misalignment angle, the spin of the BH can tear the disk into multiple, independently precessing "sub-disks." This is most likely to happen during outbursts in black hole X-Ray binaries (BHXRBs) and in active galactic nuclei (AGNs) accreting above a few percent of the Eddington limit, because the disk becomes razor-thin. Disk tearing has the potential to explain variability phenomena including quasi-periodic oscillations in BHXRBs and changing-look phenomena in AGNs. Here, we present the first radiative two-temperature general relativistic magnetohydrodynamic (GRMHD) simulation of a strongly tilted (65°) accretion disk around an M BH = 10 M ⊙ BH, which tears and precesses. This leads to luminosity swings between a few percent and 50% of the Eddington limit on sub-viscous timescales. Surprisingly, even where the disk is radiation-pressure-dominated, the accretion disk is thermally stable over t ≳ 14,000 r g /c. This suggests warps play an important role in stabilizing the disk against thermal collapse. The disk forms two nozzle shocks perpendicular to the line of nodes where the scale height of the disk decreases tenfold and the electron temperature reaches T e ~ 10 8 –10 9 K. In addition, optically thin gas crossing the tear between the inner and outer disk gets heated to T e ~ 108 K. This suggests that warped disks may emit a Comptonized spectrum that deviates substantially from idealized models.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Accretion process of the moon

Recent geochemical and geophysical data suggest that the initial temperature of the moon was strongly peaked toward the lunar surface. To explain such an initial temperature distribution, a simple model of accretion process of the moon is presented. The model assumes that the moon was formed from the accumulation of the solid particles or gases in the isolated, closed cloud. Two equations are derived to calculate the accretion rate and surface temperature of the accreting moon. Numerical calculations are made for a wide range of the parameters particle concentration and particle velocity in the cloud. A limited set of the parameters gives the initial temperature profiles as required by geochemical and geophysical data. These models of the proto-moon cloud indicate that the lunar outermost shell, about 400 km thick, was partially or completely molten just after the accretion of the moon and that the moon should have been formed in a period shorter than 1000 years. If the moon formed at a position nearer to the earth than its present one, the moon might have been formed in a period of less than one year.

Mizutani, H.↗
NASA NTRS1972

Accretion process of the moon.

Development of a simple model of the accretion process of the moon to explain its initial temperature distribution. The model assumes that the moon was formed from the accumulation of the solid particles or gases in the isolated, closed cloud. Two equations are derived to calculate the accretion rate and surface temperature of the accreting moon. Numerical calculations are made for a wide range of the particle concentrations and particle velocities in the cloud. A limited set of parameters gives the initial temperature profiles as required by geochemical and geophysical data. These models of the protomoon cloud indicate that the lunar outershell, about 400 km thick, was partially or completely molten just after the accretion of the moon and that the moon should have been formed in a period shorter than 1000 yr. If the moon formed at a position nearer to the earth than its present one, the moon might have been formed in a period of less than one year.

Mizutani, H.↗
NASA NTRS1976

Steady accretion of a rotating fluid

The accretion of rotating gas on to a gravitating object is investigated by means of a perturbation to the spherically symmetrical flow. An expression is found for the correction to the accretion rate due to rotation of the gas in terms of the boundary conditions far from the object. In the case of accretion from a cloud with uniform angular velocity, the gas is accreted preferentially from a 'jet' near the axis of rotation. The angular-momentum distribution in the cloud can be altered by the propagation of inertia waves.

Cassen, P.↗
NASA NTRS1977

An investigation of the stability of the Bondi-Hoyle model of accretion flow

The Bondi-Hoyle-Lyttleton (1944) accretion model is considered which involves accretion onto a massive body moving at a high Mach number with respect to the ambient medium and the production of a high-density accretion column along the axis where particle orbits intersect. The stability of steady-state solutions with respect to short-wavelength perturbations is analyzed using the WKB approximation, and the accretion column is shown to be unstable toward such perturbations. It is noted that this instability is not affected by the position of the stagnation point in the steady-state solution.

Cowie, L. L.↗
NASA NTRS1978

Helium-burning flashes on an accreting neutron star - A model for X-ray burst sources

Detailed numerical models of X-ray bursts resulting from thermonuclear flashes near the surface of an accreting neutron star have been constructed. The models assume a nonrotating nonmagnetized spherically accreting neutron star of 1.4 solar masses, radius 6.6 km, core temperature in the range from 250 million to 570 million K, and accretion rate in the range (0.3-3) x 10 to the 17th power g/s. Under many conditions the helium-burning shell undergoes thermonuclear flashes that result in the emission of X-ray bursts, the gross properties of which are remarkably similar to those of most observed X-ray burst sources. Neutron stars with moderately low core temperatures, low accretion rates, and weak magnetic fields are most likely to produce X-ray bursts.

Joss, P. C.↗
NASA NTRS1978

Time-dependent spherically symmetric accretion onto compact X-ray sources

Analytical arguments and a numerical hydrodynamic code are used to investigate spherically symmetric accretion onto a compact object, in an attempt to provide some insight into gas flows heated by an outgoing X-ray flux. It is shown that preheating of spherically symmetric accretion flows by energetic radiation from an X-ray source results in time-dependent behavior for a much wider range of source parameters than was determined previously and that there are two distinct types of instability. The results are compared with observations of X-ray bursters and transients as well as with theories on quasars and active galactic nuclei that involve quasi-spherically symmetric accretion onto massive black holes. Models based on spherically symmetric accretion are found to be inconsistent with observations of bursters and transients.

Cowie, L. L.↗
NASA NTRS1980

The Eddington limit and supercritical accretion. I - Time-independent calculations

Spherically symmetric, steady state accretion of an ionized hydrogen plasma onto a neutron star is considered for accretion rates which exceed a critical rate at which the Eddington limiting luminosity is produced. The coupled hydrodynamic and frequency integrated, radiative transfer equations are solved for accretion rates up to 10 times the nominal limit. Steady state solutions are presented that imply a multiplicity of different luminosity solutions for a single accretion rate in this 'supercritical' regime.

Burger, H. L.↗
NASA NTRS1980

Supercritical time-dependent accretion onto compact objects. I - Neutron stars

The time-dependent flow resulting from spherically symmetric, supercritical accretion onto a nonmagnetic neutron star is computed for accretion rates between 3 and 30. In addition, the fully time-dependent self-consistent set of coupled radiation-hydrodynamic equations governing such flow has been solved. Effects that have not previously been treated are taken into account, including separate energy equations for ions and electrons allowing for nonequilibrium, variable Eddington factors in the radiation transfer to account for anisotropy of the radiation field due to highly spherically extended envelopes, and convection of ions, electrons and photons in the accretion envelope. It is found that supercritical flow, for material falling from a radius of less than 10 to the 10th cm, is characterized by stable accretion with no evidence of stellar wind outflow at any phase of the evolution.

Klein, R. I.↗