Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Investigation of the Effect of Foaming Agent on the Fabrication of NiTi Foams Using the Self-Propagating, High-Temperature Synthesis Process

Fabrication of NiTi intermetallic foams using the self-propagating, high-temperature synthesis (SHS) process was investigated. Weighed amounts of powders taken from an equimolar mixture of Ni and Ti powders along with 0.5, 1, and 1.5 wt pct of different foaming agents were cold pressed to form cylindrical compacts 10 mm in diameter, 20 mm in height, and 7 to 8 g in weight. A novel, induction-assisted ignition method was used for indirect heating and igniting the compressed mixtures at one end. As a result of intensive exothermic reaction between Ni and Ti and decomposition of foaming agents and liberation of gases, highly porous products were obtained. Characterization of the products was carried out using X-ray diffraction (XRD) and a scanning electron microscope equipped with an energy-dispersive spectroscope (SEM-EDS). The main phase in the products was detected to be B2(NiTi) with minor amounts of NiTi{sub 2} as the secondary phase. Other undesirable phases, such as Ni{sub 4}Ti{sub 3} and Ni{sub 3}Ti, were not detected. The effect of type and percentage of foaming agent on the formation and distribution of pores within the products was studied. Final products with porosities up to ~ 80 vol pct were obtained by adding foaming agent. Under the conditions of this study, CaH{sub 2} proved to be the most effective foaming agent considering its ability to generate a uniform distribution of pores, while TiH{sub 2} was not considered favorable due to its decomposition at relatively low temperatures. In general, the addition of foaming agents in amounts higher than 1wt pct is not recommended; due to the endothermic nature of thermal decomposition reactions of foaming agents, excessive use of these agents can result in suppression of the exothermic reaction.

36 MATERIALS SCIENCE↗

Metal-Organic Frameworks As Templates for Nanoscale NaAlH 4

Metal-organic frameworks (MOFs) offer an attractive alternative to traditional hard and soft templates for nanocluster synthesis because their ordered crystalline lattice provides a highly controlled and inherently understandable environment. We demonstrate that MOFs are stable hosts for metal hydrides proposed for hydrogen storage and their reactive precursors, providing platform to test recent theoretical predictions that some of these materials can be destabilized with respect to hydrogen desorption by reducing their critical dimension to the nanoscale. With the MOF HKUST-1 as template, we show that NaAlH4 nanoclusters as small as eight formula units can be synthesized. The confinement of these clusters within the MOF pores dramatically accelerates the desorption kinetics, causing decomposition to occur at ~100 °C lower than bulk NaAlH4. However, using simultaneous thermogravimetric modulated beam mass spectrometry, we also show that the thermal decomposition mechanism of NaAlH4 is complex and may involve processes such as nucleation and growth in addition to the normally assumed two-step chemical decomposition reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quaternary ammonium borohydride adsorption in mesoporous silicate MCM-48

Inorganic borohydrides have a high gravimetric hydrogen density but release H2 only under energetically unfavorable conditions. Surface chemistry may help in lowering thermodynamic barriers, but inclusion of inorganic borohydrides in porous silica materials has proved hitherto difficult or impossible. We show that borohydrides with a large organic cation are readily adsorbed inside mesoporous silicates, particularly after surface treatment. Thermal analysis reveals that the decomposition thermodynamics of tetraalkylammonium borohydrides are substantially affected by inclusion in MCM-48. Inelastic neutron scattering (INS) data show that the compounds adsorb on the silica surface. Evidence of pore loading is supplemented by DSC/TGA, XRD, FTIR, and BET isotherm measurements. Mass spectrometry shows significant hydrogen release at lower temperature from adsorbed borohydrides in comparison with the bulk borohydrides. INS data measured for partially decomposed samples indicates that the decomposition of the cation and anion is likely simultaneous. Additionally, these data confirm the formation of Si-H bonds on the silica surface upon decomposition of adsorbed tetramethylammonium borohydride.

36 MATERIALS SCIENCE↗

Lithium-Ion Electrolytes Containing Phosphorous-Based, Flame-Retardant Additives

Future NASA missions aimed at exploring Mars, the Moon, and the outer planets require rechargeable batteries that can operate over a wide temperature range (-60 to +60 C) to satisfy the requirements of various applications. In addition, many of these applications will require improved safety, due to their use by humans. Currently, the state-of-the-art lithium-ion (Li-ion) system has been demonstrated to operate over a wide range of temperatures (-40 to +40 C); however, abuse conditions can often lead to cell rupture and fire. The nature of the electrolyte can greatly affect the propensity of the cell/battery to catch fire, given the flammability of the organic solvents used within. Li-ion electrolytes have been developed that contain a flame-retardant additive in conjunction with fluorinated co-solvents to provide a safe system with a wide operating temperature range. Previous work incorporated fluorinated esters into multi-component electrolyte formulations, which were demonstrated to cover a temperature range from 60 to +60 C. This work was described in Fluoroester Co-Solvents for Low-Temperature Li+ Cells (NPO-44626), NASA Tech Briefs, Vol. 33, No. 9 (September 2009), p. 37; and Optimized Li-Ion Electrolytes Con tain ing Fluorinated Ester Co-Solvents (NPO-45824), NASA Tech Briefs, Vol. 34, No. 3 (March 2010), p. 48. Other previous work improved the safety characteristics of the electrolytes by adding flame-retardant additives such as triphenyl phosphate (TPhPh), tri-butyl phosphate (TBuPh), triethyl phosphate (TEtPh), and bis(2,2,2-trifluoroethyl) methyl phosphonate (TFMPo). The current work involves further investigation of other types of flame-retardant additives, including tris(2,2,2-trifluoroethyl) phosphate, tris(2,2,2-trifluoroethyl) phosphite, triphenylphosphite, diethyl ethylphosphonate, and diethyl phenylphosphonate added to an electrolyte composition intended for wide operating temperatures. In general, many of the formulations investigated in this study displayed good performance over a wide temperature range, good cycle life characteristics, and are expected to have improved safety characteristics, such as low flammability. Of the electrolytes studied, 1.0 M LiPF6 in EC+EMC+DEP (20:75:5 v/v %) and 1.0 M LiPF6 in EC+EMC+DPP (20:75:5 v/v %) displayed the best operation at low temperatures, whereas the electrolyte containing triphenylphosphite displayed the best cycle life performance compared to the baseline solution. It is anticipated that further improvements can be made to the life characteristics with the incorporation of a SET promoters (such as VC, vinylene carbonate), which will likely inhibit the decomposition of the flame-retardant additives.

Smart, Marshall C.↗

Synthesis, Decomposition and Characterization of Fe and Ni Sulfides and Fe and CO Nanoparticles for Aerospace Applications

We describe several related studies where simple iron, nickel, and cobalt complexes were prepared, decomposed, and characterized for aeronautics (Fischer-Tropsch catalysts) and space (high-fidelity lunar regolith simulant additives) applications. We describe the synthesis and decomposition of several new nickel dithiocarbamate complexes. Decomposition resulted in a somewhat complicated product mix with NiS predominating. The thermogravimetric analysis of fifteen tris(diorganodithiocarbamato)iron(III) has been investigated. Each undergoes substantial mass loss upon pyrolysis in a nitrogen atmosphere between 195 and 370 C, with major mass losses occurring between 279 and 324 C. Steric repulsion between organic substituents generally decreased the decomposition temperature. The product of the pyrolysis was not well defined, but usually consistent with being either FeS or Fe2S3 or a combination of these. Iron nanoparticles were grown in a silica matrix with a long-term goal of introducing native iron into a commercial lunar dust simulant in order to more closely simulate actual lunar regolith. This was also one goal of the iron and nickel sulfide studies. Finally, cobalt nanoparticle synthesis is being studied in order to develop alternatives to crude processing of cobalt salts with ceramic supports for Fischer-Tropsch synthesis.

Cowen, Jonathan E.↗

Effects of electrolyte salts on the performance of Li-O2 batteries

It is well known that the stability of nonaqueous electrolyte is critical for the rechargeable Li-O2 batteries. Although stability of many solvents used in the electrolytes has been investigated, considerably less attention has been paid to the stability of electrolyte salt which is the second major component. Herein, we report the systematic investigation of the stability of seven common lithium salts in tetraglyme used as electrolytes for Li-O2 batteries. The discharge products of Li-O2 reaction were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy and nuclear magnetic resonance spectroscopy. The performance of Li-O2 batteries was strongly affected by the salt used in the electrolyte. Lithium tetrafluoroborate (LiBF4) and lithium bis(oxalato)borate (LiBOB) decompose and form LiF and lithium borates, respectively during the discharge of Li-O2 batteries. Several other salts, including lithium bis(trifluoromethane)sulfonamide (LiTFSI), lithium trifluoromethanesulfonate (LiTf), lithium hexafluorophosphate (LiPF6), lithium perchlorate (LiClO4) , and lithium bromide (LiBr) led to the discharge products which mainly consisted of Li2O2 and only minor signs of decomposition of LiTFSI, LiTf, LPF6 and LiClO4 were detected. LiBr showed the best stability during the discharge process. As for the cycling performance, LiTf and LiTFSI were the best among the studied salts. In addition to the instability of lithium salts, decomposition of tetraglyme solvent was a more significant factor contributing to the limited cycling stability. Thus a more stable nonaqueous electrolyte including organic solvent and lithium salt still need to be further developed to reach a fully reversible Li-O2 battery.

cycling stability↗

Catalytic activities of two different morphological nano-MnO2 on the thermal decomposition of ammonium perchlorate

Highlights: • Nano-MnO{sub 2} was produced easily. • Nano-MnO{sub 2} can promote the decomposition of AP. • Sea-urchin nano-MnO{sub 2} is a superior catalyst. - Abstract: In order to investigate the catalytic activity of nano-MnO{sub 2} on the thermal decomposition of ammonium perchlorate, two different shapes of nano-MnO{sub 2} (sea-urchin and linear) were prepared by the hydrothermal method with MnSO{sub 4}·H{sub 2}O and Na{sub 2}S{sub 2}O{sub 8}, MnSO{sub 4}·H{sub 2}O and (NH{sub 4}){sub 2}S{sub 2}O{sub 8}, respectively. X-ray diffraction, scanning electron microscopy and the nitrogen adsorption/desorption analysis were used to characterize the structure of the nanocomposites. The sea-urchin nano-MnO{sub 2} possesses a greater specific surface area than the linear nano-MnO{sub 2}. The catalytic properties of nano-MnO{sub 2} on the thermal decomposition of ammonium perchlorate (AP) were demonstrated by differential scanning calorimeter (DSC). As show in the DSC carves, the addition of the sea-urchin nano-MnO{sub 2} got the thermal decomposition peak temperature of AP reduced much more than the addition of the linear nano-MnO{sub 2}, the low-temperature decomposition process even disappeared, and the high-temperature pyrolysis peak temperature decreased by 94.6 °C. All evidences indicated that the sea-urchin nano-MnO{sub 2} is a better catalytic than the linear one.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An experimental and chemical kinetic modeling study of 4-butoxyheptane combustion

Here, the combustion kinetics of a novel oxygenated bioblendstock for diesel, 4-butoxyheptane (4-BH), was investigated experimentally using a flow reactor and a heated, high-pressure shock tube. The flow reactor experiments employed oxygen as the oxidizer and helium as the diluent with oxidation conducted at atmospheric pressure and 10 bar for temperatures from 400 to 1000 K at 20-K intervals. The fuel, oxidizer, and diluent flow rates were varied at different temperatures to maintain a constant initial fuel mole fraction of 1000 ppm, with stoichiometric equivalence ratio, and a residence time of 2.0 s. The reacted gas was fed to two separate GC systems that could qualitatively and quantitatively detect product species. Additionally, real fuel-air ignition delay time (IDT) data were collected using a heated, high-pressure shock-tube facility. Fuel lean (φ = 0.5) and stoichiometric (φ = 1.0) mixtures were investigated at 10 atm as well as at 30 atm for the fuel lean case for temperatures between 847 and 1259 K. A detailed chemical kinetics mechanism was developed to model the product distribution from the flow reactor and IDTs from the shock tube. The proposed model was able to predict the double NTC behavior in flow reactor experiments reasonably well. Model predictions at low temperatures were observed to be highly sensitive to the rate constants of ketohydroperoxide (KHP) decomposition in the case of the OOH group in α position which were modeled based on existing literature studies on ethers. It was noted that in the absence of theoretical or experimental studies, the rate constants for KHP decomposition used in the literature were empirically set. Additional studies are required to address the gap in model prediction obtained in this study and to reduce the uncertainty in kinetics models for ether oxidation. Predicted product concentrations and IDTs showed some quantitative agreement with experimental data, but the overall reactivity of the IDTs is underpredicted. Additionally, significant deviation is observed for the IDT results at 10 atm for the stoichiometric case with minor deviations for the other cases. The reaction pathways to the missing products were then further analyzed theoretically through quantum-mechanical calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Post-processing to Modify the α Phase Micro-Texture and β Phase Grain Morphology in Ti-6Al- 4 V Fabricated by Powder Bed Electron Beam Melting

Additively manufactured Ti-6Al- 4 V has columnar β grains along the build direction with a ⟨001⟩ fiber texture. Due to Burgers Orientation Relationship, the resulting α phase becomes textured albeit less strongly than the β phase. Microtexture zones have been identified in the α phase in laser-based systems. There have been limited studies on α phase texture and its impact on mechanical behavior of Ti-6Al- 4 V fabricated via electron beam melting (EBM) powder bed additive manufacturing along with the use of super-transus heat treatments to modify the resulting α phase texture. We present the role of texture on influencing the tensile behavior of EBM Ti-6Al- 4 V. We observed that super-transus heat treatment of the alloy also results in columnar to equiaxed transition of β grains with a subsequent change in α phase texture. Possible mechanisms for the formation of equiaxed β are reported on.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic migration of carbon in hard turned layers of carburized bearing steel

In grain finement and non-equilibrium there is carbon segregation within grain boundaries alters the mechanical performance of hard turning layers in carburized bearing steel. Moreover, an atom probe tomography (APT) study on the nanostructured hard turning layers reveals carbon migration to grain boundaries as a result of carbide decomposition during severe plastic deformation. In addition, samples exposed to different cutting speeds show that the carbon migration rate increases with the cutting speed. For these two effects lead to an ultrafine carbon network structure resulting in increased hardness and thermal stability in the severely deformed surface layer.

36 MATERIALS SCIENCE↗

Probing O 2 -dependence of tetrahydrofuranyl reactions via isomer-resolved speciation

Low-temperature oxidation of tetrahydrofuran involves competing reactions that depend on temperature, pressure, and oxygen concentration, including ring-opening and subsequent oxidation of initial radicals ($\dot{R}$), HOO-elimination yielding dihydrofuran isomers, and the formation of peroxy radicals ($RO\dot{O}$). Here, the latter species, upon isomerization, lead to hydroperoxy-substituted radicals ($\dot{Q}OOH$) that undergo reaction either via unimolecular decomposition or second-O 2 -addition. Quantitative measurements of partially oxidized intermediates formed from each type of reaction provide critical constraints that are required for accurate modeling of combustion. To examine the influence of temperature and oxygen concentration on intermediates from tetrahydrofuran, isomer-resolved speciation measurements were conducted at 810 Torr in a jet-stirred reactor (JSR) from 500 – 1000 K. Resulting from negative-temperature coefficient behavior, species concentrations peaked at two temperatures, 600 K and 800 K, which were then selected for separate experiments to quantify O 2 -dependence using concentrations of 0.37 • 10 18 – 7.40 • 10 18 molecules cm –3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization and Mechanistic Studies of the Dehydrogenation of NHxBHx Materials

In this review we cover the recent developments providing insight into the chemical and physical properties for a series of hydrogen-rich NBHx materials that are of interest as energy storage media for fuel cell power applications. These materials, ammonium borohydride (ABH2, [NH4][BH4]; 240 g H2/kg; 165 g/liter), ammonia borane (AB, [NH3BH3]; 196 g H2/kg; 147 g/liter) and diammoniate of diborane (DADB, [NH3BH2NH3][BH4]; 196 g H2/kg; ca. 151 g/liter), release hydrogen by a series of moderately exothermic reaction pathways. The advantage of these materials is that hydrogen release is kinetically controlled and occurs at relatively low temperatures and moderate pressures. The challenges are devising economical pathways to regenerate the fully charged hydrogen storage materials off board and understanding and controlling the formation of volatile impurities that decrease the purity of the hydrogen available for polymer electrolyte membrane fuel cell applications. The focus of this review is on the solid phase ABH2, AB and DADB materials to complement the coverage of AB in other recent review articles [1-2]. Additional discussion is given on the decomposition products of these materials, polyaminoborane (PAB, [NH2BH2]n) and polyiminoborane (PIB, [NHBH]n). The article is organized into 3 sections, (i) Synthesis and stuctural characterization; (ii) Kinetics and thermodynamics of hydrogen release and (iii) Outstanding challenges for breakthroughs. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Nanorods, nanospheres, nanocubes: Synthesis, characterization and catalytic activity of nanoferrites of Mn, Co, Ni, Part-89

Graphical abstract: Prepared nanoferrites were characterized by FE-SEM and bright field TEM micrographs. The catalytic effect of these nanoferrites was evaluated on the thermal decomposition of ammonium perchlorate using TG and TG–DSC techniques. The kinetics of thermal decomposition of AP was evaluated using isothermal TG data by model fitting as well as isoconversional method. Display Omitted Highlights: ► Synthesis of ferrite nanostructures (∼20.0 nm) by wet-chemical method under different synthetic conditions. ► Characterization using XRD, FE-SEM, EDS, TEM, HRTEM and SAED pattern. ► Catalytic activity of ferrite nanostructures on AP thermal decomposition by thermal techniques. ► Burning rate measurements of CSPs with ferrite nanostructures. ► Kinetics of thermal decomposition of AP + nanoferrites. -- Abstract: In this paper, the nanoferrites of Mn, Co and Ni were synthesized by wet chemical method and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive, X-ray spectra (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HR-TEM). It is catalytic activity were investigated on the thermal decomposition of ammonium perchlorate (AP) and composite solid propellants (CSPs) using thermogravimetry (TG), TG coupled with differential scanning calorimetry (TG–DSC) and ignition delay measurements. Kinetics of thermal decomposition of AP + nanoferrites have also been investigated using isoconversional and model fitting approaches which have been applied to data for isothermal TG decomposition. The burning rate of CSPs was considerably enhanced by these nanoferrites. Addition of nanoferrites to AP led to shifting of the high temperature decomposition peak toward lower temperature. All these studies reveal that ferrite nanorods show the best catalytic activity superior to that of nanospheres and nanocubes.

36 MATERIALS SCIENCE↗

Mineral Reactions in Shale Gas Reservoirs: Barite Scale Formation from Reusing Produced Water As Hydraulic Fracturing Fluid

Hydraulic fracturing for gas production is now ubiquitous in shale plays, but relatively little is known about shale-hydraulic fracturing fluid (HFF) reactions within the reservoir. To investigate reactions during the shut-in period of hydraulic fracturing, experiments were conducted flowing different HFFs through fractured Marcellus shale cores at reservoir temperature and pressure (66 °C, 20 MPa) for one week. Results indicate HFFs with hydrochloric acid cause substantial dissolution of carbonate minerals, as expected, increasing effective fracture volume (fracture volume + nearfracture matrix porosity) by 56-65%. HFFs with reused produced water composition cause precipitation of secondary minerals, particularly barite, decreasing effective fracture volume by 1-3%. Barite precipitation occurs despite the presence of antiscalants in experiments with and without shale contact and is driven in part by addition of dissolved sulfate from the decomposition of persulfate breakers in HFF at reservoir conditions. The overall effect of mineral changes on the reservoir has yet to be quantified, but the significant amount of barite scale formed by HFFs with reused produced water composition could reduce effective fracture volume. In conclusion, further study is required to extrapolate experimental results to reservoir-scale and to explore the effect that mineral changes from HFF interaction with shale might have on gas production.

03 NATURAL GAS↗

Observation of Nanoscale Morphological and Structural Degradation in Perovskite Solar Cells by In-Situ TEM

The chemical stability of organometallic halide perovskites is a major barrier facing their application in the fast rising field of next generation photovoltaics. These materials were shown to undergo degradation due to the influence of heat or moisture, significantly limiting the lifetime of associated devices. To overcome this stability issue, a fundamental understanding of degradation mechanisms is of foremost importance. Here, high resolution in situ transmission electron microscopy and electron energy loss spectroscopy elemental mapping were applied to probe morphological and structural changes in perovskite films during controlled environmental exposure treatments. Both moisture and oxygen in ambient air are revealed to facilitate degradation in CH 3 NH 3 PbI 3 perovskites through decomposition and oxidation pathways, respectively. In addition, even in moisture- and oxygen-free environment evident degradation could be induced by heating at the solar cell s real-field operating temperature and the degradation was found to originate from defect sites. These findings provide fundamental insight to prevent degradation of perovskite materials and associated devices for realistic applications.

14 SOLAR ENERGY↗

Experimental and theoretical investigation of ThGeO[subscript 4] at high pressure

We report here the combined results of angle-dispersive x-ray diffraction experiments performed on ThGeO{sub 4} up to 40 GPa and total-energy density-functional theory calculations. Zircon-type ThGeO{sub 4} is found to undergo a pressure-driven phase transition at 11 GPa to the tetragonal scheelite structure. A second phase transition to a monoclinic M-fergusonite type is found beyond 26 GPa. The same transition has been observed in samples that crystallize in the scheelite phase at ambient pressure. No additional phase transition or evidence of decomposition of ThGeO{sub 4} has been detected up to 40 GPa. The unit-cell parameters of the monoclinic high-pressure phase are a = 4.98(2) {angstrom}, b = 11.08(4) {angstrom}, c = 4.87(2) {angstrom}, and {beta} = 90.1(1), Z = 4 at 28.8 GPa. The scheelite-fergusonite transition is reversible and the zircon-scheelite transition nonreversible. From the experiments and the calculations, the room-temperature equation of state for the different phases is also obtained. The anisotropic compressibility of the studied crystal is discussed in terms of the differential compressibility of the Th-O and Ge-O bonds.

36 MATERIALS SCIENCE↗

Kodama time: Geometrically preferred foliations of spherically symmetric spacetimes

In a general time-dependent (3+1)-dimensional spherically symmetric spacetime, the so-called Kodama vector is a naturally defined geometric quantity that is timelike outside the evolving horizon and so defines a preferred class of fiducial observers. However the Kodama vector does not by itself define any preferred notion of time. We first extract as much information as possible by invoking the 'warped product' structure of spherically symmetric spacetime to study the Kodama vector, and the associated Kodama energy flux, in a coordinate-independent manner. Using this formalism we construct a general class of conservation laws, generalizing Kodama's energy flux. We then demonstrate that a preferred time coordinate - which we shall call Kodama time - can be introduced by taking the additional step of applying the Clebsch decomposition theorem to the Kodama vector. We thus construct a geometrically preferred coordinate system for any time-dependent spherically symmetric spacetime, and explore its properties. We study the geometrically preferred fiducial observers, and demonstrate that it is possible to define and calculate a generalized notion of surface gravity that is valid throughout the entire evolving spacetime. Furthermore, by building and suitably normalizing a set of radial null geodesics, we can show that this generalized surface gravity passes several consistency tests and has a physically appropriate static limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient Scalable Parallel Higher Order Direct MoM-SIE Method With Hierarchically Semiseparable Structures for 3-D Scattering

A novel fast scalable parallel algorithm is proposed for the solution of large 3-D scattering problems based on: 1) the double (geometrical and current-approximation) higher order (DHO) method of moments (MoM) in the surface integral equation (SIE) formulation and 2) a direct solver for dense linear systems utilizing hierarchically semiseparable (HSS) structures. Namely, an HSS matrix representation is used for compression, factorization, and solution of the system matrix. In addition, a rank-revealing QR decomposition for memory compression is used, with a stopping criterion in terms of the relative rank tolerance value. One method for geometrical preprocessing of the scatterers based on the cobblestone distance sorting technique is employed in order to enhance the HSS algorithm accuracy and parallelization. Numerical examples show how the accuracy of the DHO HSS-MoM-SIE method is easily controllable by using the relative tolerance for the matrix compression. Furthermore, the examples demonstrate low memory consumption, as well as much faster simulation time, when compared to the direct LU decomposition. The method enables dramatically faster monostatic scattering computations than iterative solvers and reduced number of unknowns when compared to low-order discretizations. Finally, great scalability of the algorithm is demonstrated on more than one thousand processes.

97 MATHEMATICS AND COMPUTING↗