Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aluminum Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Mixed composition materials suitable for vacuum web sputter coating

Ion beam sputter deposition techniques were used to investigate simultaneous sputter etching of two component targets so as to produce mixed composition films. Although sputter deposition has been largely confined to metals and metal oxides, at least one polymeric material, poly-tetra-fluorethylene, has been demonstrated to produce sputtered fragments which repolymerize upon deposition to produce a highly cross-linked fluoropolymer resembling that of the parent target Fluoropolymer-filled silicon dioxide and fluoropolymer-filled aluminum oxide coatings have been deposited by means of ion beam sputter coat deposition resulting in films having material properties suitable for aerospace and commercial applications. The addition of fluoropolymer to silicon dioxide films was found to increase the hydrophobicity of the resulting mixed films; however, adding fluoropolymer to aluminum oxide films resulted in a reduction in hydrophobicity, thought to be caused by aluminum fluoride formation.

Banks, Bruce A.↗
NASA NTRS1993

Velocity and drop size measurements in a swirl-stabilized, combusting spray

Velocity and drop size measurements are reported for a swirl-stabilized, combusting spray. For the gas phase, three components of mean and fluctuating velocity are reported. For the droplets, three components of mean and fluctuating velocity, diameter, and number flux are reported. The liquid fuel utilized for all the tests was heptane. The fuel was injected using an air-assist atomizer. The combustor configuration consisted of a center-mounted, air-assist atomizer surrounded by a coflowing air stream. Both the coflow and the atomizing air streams were passed through 45 degree swirlers. The swirl was imparted to both streams in the same direction. The combustion occurred unconfined in stagnant surroundings. The nonintrusive measurements were obtained using a two-component phase/Doppler particle analyzer. The laser-based instrument measured two components of velocity as well as droplet size at a particular point. Gas phase measurements were obtained by seeding the air streams with nominal 1 micron size aluminum-oxide particles and using the measured velocity from that size to represent the gas phase velocity. The atomizing air, coflow air, and ambient surroundings were all seeded with the aluminum-oxide particles to prevent biasing. Measurements are reported at an axial distance of 5 mm from the nozzle. Isothermal single-phase gas velocities are also reported for comparison with the combusting case.

Bulzan, Daniel L.↗
NASA NTRS1980

Fracture toughness of brittle materials determined with chevron notch specimens

The use of chevron-notch specimens for determining the plane strain fracture toughness (K sub Ic) of brittle materials is discussed. Three chevron-notch specimens were investigated: short bar, short rod, and four-point-bend. The dimensionless stress intensity coefficient used in computing K sub Ic is derived for the short bar specimen from the superposition of ligament-dependent and ligament-independent solutions for the straight through crack, and also from experimental compliance calibrations. Coefficients for the four-point-bend specimen were developed by the same superposition procedure, and with additional refinement using the slice model of Bluhm. Short rod specimen stress intensity coefficients were determined only by experimental compliance calibration. Performance of the three chevron-notch specimens and their stress intensity factor relations were evaluated by tests on hot-pressed silicon nitride and sintered aluminum oxide. Results obtained with the short bar and the four-point-bend specimens on silicon nitride are in good agreement and relatively free of specimen geometry and size effects within the range investigated. Results on aluminum oxide were affected by specimen size and chevron-notch geometry, believed due to a rising crack growth resistance curve for the material. Only the results for the short bar specimen are presented in detail.

Shannon, J. L., Jr.↗
NASA NTRS1991

Evaluation and ranking of candidate ceramic wafer engine seal materials

Modern engineered ceramics offer high temperature capabilities not found in even the best superalloy metals. The high temperature properties of several selected ceramics including aluminum oxide, silicon carbide, and silicon nitride are reviewed as they apply to hypersonic engine seal design. A ranking procedure is employed to objectively differentiate among four different monolithic ceramic materials considered, including: a cold-pressed and sintered aluminum oxide; a sintered alpha-phase silicon carbide; a hot-isostatically pressed silicon nitride; and a cold-pressed and sintered silicon nitride. This procedure is used to narrow the wide range of potential ceramics considered to an acceptable number for future detailed and costly analyses and tests. The materials are numerically scored according to their high temperature flexural strength; high temperature thermal conductivity; resistance to crack growth; resistance to high heating rates; fracture toughness; Weibull modulus; and finally according to their resistance to leakage flow, where materials having coefficients of thermal expansion closely matching the engine panel material resist leakage flow best. The cold-pressed and sintered material (Kyocera SN-251) ranked the highest in the overall ranking especially when implemented in engine panels made of low expansion rate materials being considered for the engine, including Incoloy and titanium alloys.

Steinetz, Bruce M.↗
NASA NTRS1996

Application of Two-Phase CFD to the Design and Analysis of a Subscale Motor Experiment to Evaluate Propellant Slag Production

The redesigned solid rocket motor (RSRM) Pressure Perturbation Investigation Team concluded that the cause of recent pressure spikes during both static and flight motor burns was the expulsion of molten aluminum oxide slag from a pool which collects in the aft end of the motor around the submerged nozzle nose during the last half of motor operation. It is suspected that some motors produce more slag than others due to differences in aluminum oxide agglomerate particle sizes which may relate to subtle differences in propellant ingredient characteristics such as particle size distribution, contaminants, or processing variations. In order to determine the effect of suspect propellant ingredient characteristics on the propensity for slag production in a real motor environment, a subscale motor experiment was designed. An existing 5 inch ballistic test motor was selected as the basic test vehicle due to low cost and quick turn around times. The standard converging/diverging nozzle was replaced with a submerged nozzle nose design to provide a positive trap for the slag which would increase both the quantity and repeatability of measured slag weights. Computational fluid dynamics (CFD) was used to assess a variety of submerged nose configurations to identify the design which possessed the best capability to reliably collect slag. CFD also was used to assure that the final selected nozzle design would result in flow field characteristics such as dividing streamline location, nose attach point, and separated flow structure which would have similtude with the RSRM submerged nozzle nose flow field. It also was decided to spin the 5 inch motor about its longitudinal axis to further enhance slag collection quantities. Again, CFD was used to select an appropriate spin rate along with other considerations, including the avoidance of burn rate enhancement from radial acceleration effects.

Whitesides, R. Harold↗
DOE OSTI2023

Exploiting Fixed Charge at Selective Contacts for Silicon Photovoltaics

The goal of this work was to examine and exploit fixed interface charges in ultra-thin (0-3 nm thickness) tunnel dielectric layers sandwiched between silicon and selective contact metal oxides (molybdenum oxide, MoO x , titanium oxide, TiO 2 ). Specifically, the interface fixed charge was varied by changing processing conditions and materials over a wide range and the effect on the current-voltage behavior and the Schottky barrier height was quantified. In budget period 1 (year 1), the objective was to grow aluminum oxide tunnel layers with quantified fixed charge over a range of ~1E12 to ~-2E12 cm -2 and combine these with MoO x and TiO 2 layers on Czochralsi (CZ) mono p- and n-Si, respectively. We sought conditions that maximize fixed charge and minimize Schottky barrier height to MoO x contacts to p-Si. This objective, along with investigating the effects of silicon surface terminations, occupied the majority of the project timeline (Q1-Q8) due to complications with high specific contact resistivity values. In the last two quarters of the project period, the objective was to insert HfO2 layers between Si and aluminum oxide layers to quench the fixed charge for layers with otherwise identical thermal history. Another objective was to lower the barrier height at TiO 2 -based contacts on n-type Si, but that was never investigated completely.

14 SOLAR ENERGY↗
DOE OSTI2026

Enabling Long Term, Shelf‐Stable Perovskite Solar Cells: Alumina Barriers to Protect Perovskite Devices from Moisture and Oxygen

Current encapsulation architectures for thin-film metal halide perovskite do not adequately eliminate all ambient stressors. Here, we develop low transmission rate barrier layers using atomic layer deposited (ALD) aluminum oxide grown directly on the completed photovoltaic (PV) device stack to provide an additional seal, prior to full packaging. We investigate the effect of deposition temperature and oxidant chemistries on the barrier growth for protection of perovskite photovoltaic devices. We characterize the layers individually, then integrate into devices to detail the tradeoff between protection and deposition compatibility. To enhance compatibility and impermeability, we present an approach using water as the aluminum oxidant during nucleation and switching from water to ozone for the remainder of the growth. At 50 nm, the barrier results in a water vapor transmission rate (WVTR) of 4.5·10 −4 g/m 2 /day, and 1,000-hour device stability under 45°C with 85% relative humidity without further packaging. This barrier provides sufficient protection to enable minimal degradation of the perovskite solar cells while completely submerged in water for 140 minutes. Additionally, we characterize the oxygen transmission rate (OTR) to be 0.49 cm 3 /m 2 /day at 23°C and 0% relative humidity, which is 1.5 orders of magnitude improvement over the OTR of the current encapsulation.

14 SOLAR ENERGY↗
DOE OSTI2024

Correlating aluminum layer deposition rates, Josephson junction microstructure, and superconducting qubits’ performance

An ultra-thin aluminum oxide layer is a key component for Josephson junctions (JJ) in superconducting quantum bits (qubits). This layer serves as a barrier layer for Cooper pairs tunneling between the superconducting electrodes and significantly influences the overall performance of the junction. In this study, we investigate the impact of aluminum deposition rates on the microstructure and chemical variation of the aluminum oxide layer, as well as the device's yields and qubits’ lifetimes. Surprisingly, although the oxide layer roughness and thickness variation improve noticeably with an increasing Al deposition rate from 0.5 Å/s to 5 Å/s, the qubit's coherence time is almost unchanged. We attribute this to the fact that Cooper pairs tunnel only through the thinnest region of the barrier. Additionally, we revealed a stress-induced grain boundary sliding short-circuit failure mechanism in the JJ. Our discovery provides a vital understanding of oxide microstructure and JJ functionality, which are critical for improving the coherence time of superconducting qubits.

Coherence time↗
NASA NTRS1983

Sliding induced crystallization of metallic glass

Sliding friction and wear experiments, electron microscopy, and diffraction studies were conducted with an Fe67Co18B14Si1 ferrous-base metallic glass in sliding contact with aluminum oxide at room temperature in air. The results indicate that the amorphous alloy can be crystallized during the sliding process. Crystallization of the wear surface causes high friction. Plastic flow occurred on the amorphous alloy with sliding, and the flow film of the alloy transferred to the aluminum oxide surface. Two distinct types of wear debris were observed as a result of sliding: an alloy wear debris, and powdery and whiskery oxide debris. Generation of oxide wear debris particles on an alloy can cause transitions in friction behavior.

Miyoshi, K.↗
NASA NTRS1980

Hypervelocity impacts on Skylab IV/Apollo windows

A description is presented of some new observations of crater morphology on the Skylab IV/Apollo windows. Aluminum is detected as the only foreign component in six of the seven lined glassy pit craters so far examined by EDS analysis. The most probable source is from aluminum oxide spherules, exhaust effluent of solid fuel rocket motors. The seventh crater contains titanium which may have been derived from an impact of a chip of thermal paint. The size distribution of the lined glassy pit craters appears to be compatible with an origin by hypervelocity impacts of aluminum spherules. If the aluminum oxide spherules are in earth orbit, impact velocities largely in the range of 7 to 10 km/s should be expected. Thus, the impact velocities are well below those expected for most impacts by micrometeorites and these lower velocities may be significant in the development of the lined glassy pit craters. The results indicate that there is a significant population of man-induced micro-debris in earth orbit.

Clanton, U. S.↗
DOE OSTI2022

Hydrophobic sorbents for CO 2 /H 2 O displacement desorption applications

The disclosure generally relates to CCS sorbents, particularly for CO 2 /H 2 O displacement desorption process. The sorbent includes an aluminum oxide support and an alkali metal salt impregnated on the support, and a silicon modification of the sorbent to reduce water uptake by the sorbent and make it more hydrophobic. The silicon modification can be an organosilyl moiety added after the initial sorbent is complete, or a silica source added to the aluminum oxide structure, typically via impregnation. The sorbents demonstrate better H 2 O/CO 2 ratios. Compositions and methods of making are disclosed.

Bai, Chuansheng↗
NASA NTRS1980

Stratospheric aerosol modification by supersonic transport and space shuttle operations - Climate implications

The potential effects on stratospheric aerosols of supersonic transport emissions of sulfur dioxide gas and submicron soot granules, and space shuttle rocket emissions of aluminum oxide particulates are estimated. An interactive particle-gas model of the stratospheric aerosol layer is used to calculate changes due to exhaust emissions, and an accurate radiation transport model is employed to compute the effect of aerosol changes on the earth's average surface temperature. It is concluded that the release of large numbers of small particles (soot or aluminum oxide) into the stratosphere should not lead to a corresponding significant increase in the concentration of large, optically active aerosols, but that the increase in large particles is severely limited by the total mass of sulfate available to make large particles in situ, and by the rapid loss of small seed particles via coagulation. We find that a fleet of several hundred advanced supersonic aircraft operating daily at 20 km, or the launch of one space shuttle rocket per week, could produce roughly a 20% increase in the large-particle concentration of the stratosphere. We find, in addition, that aerosol increases of this magnitude would reduce the global surface temperature by less than 0.01 K.

Turco, R. P.↗
DOE OSTI2020

A density-functional theory study of the Al/AlOx/Al tunnel junction

The aluminum oxide tunnel junction is a key component of the majority of superconducting quantum devices. For high-quality, reproducible, and scalably manufacturable qubits, the ability to fabricate Josephson junctions (JJs) with a targeted critical current and high uniformity is essential. In this study, we use first-principles modeling to assess fundamental aspects of the atomic structure of both amorphous and crystalline aluminum oxide tunnel junctions and relate the structure to predicted performance metrics. We use modified ab initio molecular dynamics to develop realistic models of the tunnel junction, from which interface roughness and local thickness fluctuations are analyzed in an unbiased manner by training a neural network to identify the boundary between metal and oxide. We show that the effective thickness of the insulating part of the junction can be different from the apparent physical thickness. We calculate the rate of Cooper pair tunneling for the atomically resolved electrostatic potential using direct numerical solution in 3D, which shows a channeling effect that impacts the junction critical current. The predicted critical current is a useful JJ design parameter that can be accessed from the ab initio calculations without fitting parameters. To assess the limits of uniformity and fabrication choices (e.g., oxidation vs epitaxy), we compare the amorphous junctions to crystalline models, which show order of magnitude more efficient tunneling compared to the amorphous case, underlining the connection between atomistic structure and Cooper pair tunneling efficiency. Further, this work provides a foundation for ab initio materials design and evaluation to help accelerate future development of improved tunnel junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ceramic thin-film composite membranes with tunable subnanometer pores for molecular sieving

Abstract Ceramic membranes are a promising alternative to polymeric membranes for selective separations, given their ability to operate under harsh chemical conditions. However, current fabrication technologies fail to construct ceramic membranes suitable for selective molecular separations. Herein, we demonstrate a molecular-level design of ceramic thin-film composite membranes with tunable subnanometer pores for precise molecular sieving. Through burning off the distributed carbonaceous species of varied dimensions within hybrid aluminum oxide films, we created membranes with tunable molecular sieving. Specifically, the membranes created with methanol showed exceptional selectivity toward monovalent and divalent salts. We attribute this observed selectivity to the dehydration of the large divalent ions within the subnanometer pores. As a comparison, smaller monovalent ions can rapidly permeate with an intact hydration shell. Lastly, the flux of neutral solutes through each fabricated aluminum oxide membrane was measured for the demonstration of tunable separation capability. Overall, our work provides the scientific basis for the design of ceramic membranes with subnanometer pores for molecular sieving using atomic layer deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

Measurement of high-temperature thermal conductivity of Lucalox /Al2O3/ using a heat pipe technique.

The thermal conductivity of Lucalox, a high-purity form of aluminum oxide, has been measured over the temperature range from 870 to 1400 C. The technique employed is a novel one using a lithium-filled heat pipe in series with a gas-gap variable-heat-conductance unit as a heat source. The procedure makes it possible to measure heat flux through the sample directly. The measurements indicate that the thermal conductivity of high-purity aluminum oxide has a minimum value of about 0.05 W/cm deg C at 950 C and increases with higher temperatures to values in the range of 0.3 W/cm deg C at 1400 C.

Forman, R.↗
NASA NTRS1980

Thin film temperature sensor

Thin film surface temperature sensors were developed. The sensors were made of platinum-platinum/10 percent rhodium thermocouples with associated thin film-to-lead wire connections and sputtered on aluminum oxide coated simulated turbine blades for testing. Tests included exposure to vibration, low velocity hydrocarbon hot gas flow to 1250 K, and furnace calibrations. Thermal electromotive force was typically two percent below standard type S thermocouples. Mean time to failure was 42 hours at a hot gas flow temperature of 1250 K and an average of 15 cycles to room temperature. Failures were mainly due to separation of the platinum thin film from the aluminum oxide surface. Several techniques to improve the adhesion of the platinum are discussed.

Grant, H. P.↗
NASA NTRS1980

Analysis of the measured effects of the principal exhaust effluents from solid rocket motors

The feasibility of conducting environmental chamber tests using a small rocket motor to study the physical processes which occur when the exhaust products from solid motors mix with the ambient atmosphere was investigated. Of particular interest was the interaction between hydrogen chloride, aluminum oxide, and water vapor. Several types of instruments for measuring HCl concentrations were evaluated. Under some conditions it was noted that acid aerosols were formed in the ground cloud. These droplets condensed on Al2O3 nuclei and were associated with the rocket exhaust cooling during the period of plume rise to stabilization. Outdoor firings of the solid rocket motors of a 6.4 percent scaled model of the space shuttle were monitored to study the interaction of the exhaust effluents with vegetation downwind of the test site. Data concerning aluminum oxide particles produced by solid rocket motors were evaluated.

Dawbarn, R.↗
NASA NTRS1988

Containerless laser-induced flourescence study of vaporization and optical properties for sapphire and alumina

Evaporation of aluminum oxide was studied from 1800 to 2327 K by laser-induced flourescence (LIF) detection of Al atom vapor over sapphire and alumina spheres that were levitated in an argon gas jet and heated with a continuous wave CO2 laser. Optical properties were determined from apparent specimen temperatures measured with an optical pyrometer and true temperatures deduced from the LIF intensity versus temperature measurements using the known temperature dependence of the Al atom vapor concentration in equilibrium with Al2O3. The effects of impurities and dissolved oxygen on the high-temperature optical properties of aluminum oxide were discussed.

Nordine, Paul C.↗