Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analog electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Photodissociation dynamics of methyl vinyl ketone oxide: A four-carbon unsaturated Criegee intermediate from isoprene ozonolysis

The electronic spectrum of methyl vinyl ketone oxide (MVK-oxide), a four-carbon Criegee intermediate derived from isoprene ozonolysis, is examined on its second π* ← π transition, involving primarily the vinyl group, at UV wavelengths (λ) below 300 nm. A broad and unstructured spectrum is obtained by a UV-induced ground state depletion method with photoionization detection on the parent mass (m/z 86). Electronic excitation of MVK-oxide results in dissociation to O ( 1 D) products that are characterized using velocity map imaging. Electronic excitation of MVK-oxide on the first π* ← π transition associated primarily with the carbonyl oxide group at λ > 300 nm results in a prompt dissociation, and yields broad total kinetic energy release (TKER) and anisotropic angular distributions for the O ( 1 D) + methyl vinyl ketone products. By contrast, electronic excitation at λ ≤ 300 nm results in bimodal TKER and angular distributions, indicating two distinct dissociation pathways to O ( 1 D) products. Furthermore, one pathway is analogous to that at λ > 300 nm, while the second pathway results in very low TKER and isotropic angular distributions indicative of internal conversion to the ground electronic state and statistical unimolecular dissociation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a High-Rate Front-End ASIC for X-Ray Spectroscopy and Diffraction Applications

We developed a new front-end application-specific integrated circuit (ASIC) to upgrade the Maia X-ray microprobe. The ASIC instruments 32 configurable channels that perform either positive or negative charge amplification, pulse shaping, peak amplitude, and time extraction along with buffered analog storage. At a gain of 3.6 V/fC, 1-μs peaking time, and a temperature of 248 K, an electronic resolution of 13 and 10 e- rms was measured with and without a silicon drift detector (SDD) sensor, respectively. A spectral resolution of 170-eV full-width at half-maximum (FWHM) at 5.9 keV was obtained with an 55Fe source. The channel linearity was better than ± 1% with rate capabilities up to 40 kcps. The ASIC was fabricated in a commercial 250-nm process with a footprint of 6.3 mm × 3.9 mm and dissipates 167 mW of static power.

Vernon, Emerson↗

Imaginary admittance and charge transfer resistance correlate to the physiological status of Shewanella oneidensis cultures in real time

Monitoring microbial activity is essential for industrial and environmental applications to proceed efficiently. To minimize time and labor-intensive monitoring, a new paradigm is required for in-situ, real time analysis. Since bioconversion of organics is accomplished by microorganisms through the oxidation of feedstocks linked to the reduction of electron acceptors, microorganisms can be viewed as electrochemical catalysts. In this respect, cell membranes have an electrical potential, which is analogous to a conventional capacitor and linked dynamically to cellular activity. Here, in this study, we demonstrate the use of electrochemical impedance spectrometry (EIS) and cyclic voltammetry (CV) for monitoring microbial metabolic activity in real time, in-situ. The effect of organic electron donors as a function of concentration to the physiological status of strains of Shewanella oneidensis was determined. In this study, the pyomelanin overproducer (S. oneidensis ΔhmgA) and the pyomelanin deficient mutant (S. oneidensis ΔmelA) were chosen due to different surface electrochemical characteristics along with differences in oxygen utilization efficiency. CV, relative admittance, phase shift and permittivity changed with growth status and correlated with electron flow from organic carbon sources and terminal electron acceptor availability. This work offers a novel and inexpensive approach to real time monitoring with the advantage of abundant data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterologous synthesis of a simplified nitrogenase analog in Escherichia coli

The heterologous synthesis of a nitrogen-fixing system in a non-diazotrophic organism is a long-sought-after goal because of the crucial importance of nitrogenase for agronomy, energy, and the environment. Here, we report the heterologous synthesis of a two-component nitrogenase analog fromAzotobacter vinelandii, which consists of the reductase component (NifH) and the cofactor maturase (NifEN), inEscherichia coli. Metal, electron paramagnetic resonance, and activity analyses verify the cluster composition and functional competence of the heterologously expressed NifH and NifEN. Nuclear magnetic resonance, nanoscale secondary ion mass spectrometry, and growth experiments further illustrate the ability of the NifH/NifEN system to reduce N 2 and incorporate the reduced N into the cellular mass. These results establish NifEN/NifH as a simplified nitrogenase analog that could be optimized and engineered to facilitate transgenic expression and biotechnological adaptations of this important metalloenzyme.

Science & Technology - Other Topics↗

Absence of mixed valency for Pr in pristine and hole-doped PrNiO 2

Infinite-layer nickelates (𝑅⁢NiO 2 ) exhibit some distinct differences as compared to cuprate superconductors, leading to a debate concerning the role of rare-earth ions (𝑅=La,Pr,Nd) in the low-energy many-body physics. Although rare-earth 4⁢𝑓 orbitals are typically treated as inert “core” electrons in studies, this approximation has been questioned. An active participation of 4⁢𝑓 states is most likely for PrNiO 2 based on an analogy to cuprates where Pr cuprates differ significantly from other cuprates. Here, we adopt density functional plus dynamical mean-field theory to investigate the role of Pr 4⁢𝑓 orbitals and more generally the correlated electronic structure of PrNiO 2 and its hole-doped variant. We find that the Pr 4⁢𝑓 states are insulating and show no evidence for either a Kondo resonance or Zhang-Rice singlet formation as they do not have any hybridization channels near the Fermi energy. The biggest effects of hole doping are to shift the Pr 5⁢𝑑 and 4⁢𝑓 states further away from the Fermi energy whereas enhancing the Ni 3⁢𝑑−O 2⁢𝑝 hybridization, thus, reducing correlation effects as the O 2⁢𝑝 states get closer to the Fermi energy. We again find no evidence for either Kondo or Zhang-Rice physics for the 4⁢𝑓 states upon hole doping. Finally, we conclude by commenting on implications for other reduced valence nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photosynthetic reaction center variants made via genetic code expansion show Tyr at M210 tunes the initial electron transfer mechanism

Significance Reaction centers (RCs) are critical to photosynthetic energy conversion. RCs in all characterized photosynthetic organisms contain two symmetrically arranged branches of chromophores and enable light-induced electron transfer with high yield. We fine-tune the properties of a key bacterial RC symmetry-breaking tyrosine via its replacement with noncanonical tyrosine analogs and determine kinetic outcomes. Results are interpreted through energetic characterization made possible by resonance Stark spectroscopy. Analysis indicates this tyrosine modulates the mechanism of the initial light-induced electron transfer, affording an alternative functional pathway that maintains the RC’s robust electron transfer. Modern molecular biology, ultrafast spectroscopy, crystallography, and energetic characterization enable the mechanistic model we describe. Our results deepen understanding of RC function and may have implications for other photocatalysts and enzymes.

59 BASIC BIOLOGICAL SCIENCES↗

Reactivity of Iridium Complexes of a Triphosphorus-Pincer Ligand Based on a Secondary Phosphine. Catalytic Alkane Dehydrogenation and the Origin of Extremely High Activity

The selective functionalization of alkanes and alkyl groups is a major goal of chemical catalysis. Toward this end, a bulky triphosphine with a central secondary phosphino group, bis(2-di-t-butyl-phosphinophenyl)phosphine ( tBu P H PP), has been synthesized. When complexed to iridium, it adopts a meridional (“pincer”) configuration. The secondary phosphino H atom can undergo migration to iridium to give an anionic phosphido-based–pincer ( tBu PPP) complex. Stoichiometric reactions of the ( tBu PPP)Ir complexes reflect a distribution of steric bulk around the iridium center in which the coordination site trans to the phosphido group is quite crowded; one coordination site cis to the phosphido is even more crowded; and the remaining site is particularly open. The ( tBu PPP)Ir precursors are the most active catalysts reported to date for dehydrogenation of n-alkanes, by about 2 orders of magnitude. The electronic properties of the iridium center are similar to that of well-known analogous ( R PCP)Ir catalysts. Accordingly, DFT calculations predict that ( tBu PPP)Ir and ( tBu PCP)Ir are, intrinsically, comparably active for alkane dehydrogenation. While dehydrogenation by ( R PCP)Ir proceeds through an intermediate trans-(PCP)IrH 2 (alkene), ( tBu PPP)Ir follows a pathway proceeding via cis-(PPP)IrH 2 (alkene), thereby circumventing unfavorable placement of the alkene at the bulky site trans to phosphorus. ( tBu PPP)Ir and ( tBu PCP)Ir, however, have analogous resting states: square planar (pincer)Ir(alkene). Alkene coordination at the crowded trans site is therefore unavoidable in the resting states. Furthermore, the resting state of the ( tBu PPP)Ir catalyst is destabilized by the architecture of the ligand, and this is largely responsible for its unusually high catalytic activity.

02 PETROLEUM↗

Vortical effects in chiral band structures

The chiral vortical effect is a chiral anomaly-induced transport phenomenon characterized by an axial current in a uniformly rotating chiral fluid. It is well understood for Weyl fermions in high energy physics, but its realization in condensed matter band structures, including those of Weyl semimetals, has been controversial. In this work, we develop the Kubo response theory for electrons in a general band structure subject to space- and time-dependent rotation or vorticity relative to the background lattice. For continuum Hamiltonians, we recover the chiral vortical effect in the static limit and the transport or uniform limit when the fluid, strictly, is not a Fermi liquid. In the transport limit of a Fermi liquid, we describe an effect that we dub the gyrotropic vortical effect. The latter is governed by Berry curvature of the occupied bands while the former contains an additional contribution from the magnetic moment of electrons on the Fermi surface. The two vortical effects can be understood as kinematic analogs of the well-known chiral and gyrotropic magnetic effects in chiral band structures. As a result, we address recent controversies in the field and conclude by describing device geometries that exploit Ohmic or Seebeck transport to drive the vortical effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bosonic Pair Production and Squeezing for Optical Phase Measurements in Long-Lived Dipoles Coupled to a Cavity

Here, we propose to simulate bosonic pair creation using large arrays of long-lived dipoles with multilevel internal structure coupled to an undriven optical cavity. Entanglement between the atoms, generated by the exchange of virtual photons through a common cavity mode, grows exponentially fast and is described by two-mode squeezing of effective bosonic quadratures. The mapping between an effective bosonic model and the natural spin description of the dipoles allows us to realize the analog of optical homodyne measurements via straightforward global rotations and population measurements of the electronic states, and we propose to exploit this for quantum-enhanced sensing of an optical phase (common and differential between two ensembles). We discuss a specific implementation based on Sr atoms and show that our sensing protocol is robust to sources of decoherence intrinsic to cavity platforms. Our proposal can open unique opportunities for next-generation optical atomic clocks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integration of Multiple Real-time Simulation Platforms with AIO for Scalability

This paper introduces a practical and scalable approach to extend interoperability of Controller Hardware in the Loop (CHIL) validations for large scale microgrids, networked microgrids, and power electronics-based feeders. The work focuses on integrating multiple real-time simulators using Analog Input/Output (AIO) interface techniques in heterogeneous CHIL environment. It explores interfacing methods, highlighting key challenges related to dynamic accuracy and maintaining bidirectional power balance. A comparative evaluation of the Ideal Transformer Method is presented, assessing its effectiveness in multi-CHIL integration scenarios. The feasibility of this setup is demonstrated through a real-time use case involving multiple Typhoon HIL and Opal-RT platforms, showcasing its applicability for distributed system studies.

Khalid, Mohammad [ORNL] (ORCID:0000000179208805)↗

Xyce Parallel Electronic Simulator Users' Guide (Version 7.2)

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. Device models that are specifically tailored to meet Sandias needs, including some radiation-aware devices (for Sandia users only). Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase - a message passing parallel implementation - which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

42 ENGINEERING↗

Xyce Parallel Electronic Simulator Users' Guide (V.7.1)

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: 1) Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. 2) A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. 3) Device models that are specifically tailored to meet Sandia's needs, including some radiation-aware devices (for Sandia users only). 4) Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase a message passing parallel implementation which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

42 ENGINEERING↗

Xyce Parallel Electronic Simulator Users' Guide (V. 7.3)

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers; A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models; Device models that are specifically tailored to meet Sandia's needs, including some radiation-aware devices (for Sandia users only); Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase—a message passing parallel implementation—which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

42 ENGINEERING↗

Xyce Parallel Electronic Simulator Users' Guide Version 7.4

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: • Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. • A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. • Device models that are specifically tailored to meet Sandia’s needs, including some radiation-aware devices (for Sandia users only). • Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase — a message passing parallel implementation — which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

42 ENGINEERING↗

Xyce™ Parallel Electronic Simulator Users' Guide, Version 7.5.

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: (1) Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. (2) A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. (3) Device models that are specifically tailored to meet Sandia's needs, including some radiation-aware devices (for Sandia users only). (4) Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase — a message passing parallel implementation — which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

97 MATHEMATICS AND COMPUTING↗

Xyce™ Parallel Electronic Simulator Users' Guide (V.7.6)

This manual describes the use of the Xyce™ Parallel Electronic Simulator. Xyce™ has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: (1) Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. (2) A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. (3) Device models that are specifically tailored to meet Sandia's needs, including some radiation-aware devices (for Sandia users only). (4) Object-oriented code design and implementation using modern coding practices. Xyce™ is a parallel code in the most general sense of the phrase—a message passing parallel implementation—which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel eficiency is achieved as the number of processors grows.

97 MATHEMATICS AND COMPUTING↗

Xyce™ Parallel Electronic Simulator Users’ Guide, Version 7.8

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: (1) Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. (2) A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. (3) Device models that are specifically tailored to meet Sandia’s needs, including some radiation-aware devices (for Sandia users only). (4) Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase — a message passing parallel implementation — which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

42 ENGINEERING↗