SEARCH · Search NASA

Results for “Approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Comparison of Two Approaches to Constructing Second- and Third-Order Nodal-Gradient Cell-Centered Finite-Volume Methods for Mixed-Element Grids

In this paper, we introduce a third-order nodal-gradient cell-centered ﬁnite volume scheme applicable to mixed-element grids based on a single numerical ﬂux per face. Previously, we considered a split-quadrilateral-face approach, where we split each quadrilateral face of a non-tetrahedral cell into two triangles and then apply second- and third-order schemes designed for tetrahedral grids. This approach is relatively simple to implement but expensive because it requires two numerical ﬂux evaluations per quadrilateral face. In this study, we consider another approach, where the surface ﬂux quadrature is performed with a single numerical ﬂux per face with ﬂux corrections. It requires a 3×3 correction matrix to be stored at each face but is more economical than the split-quadrilateral-face approach. The two approaches are compared for three-dimensional ﬂows on irregular hexahedral grids, and their relative merits are discussed.

Third-order scheme↗

NASA NTRSDate not supplied

Analysis of the Approach Direction of HLS to a South Pole Landing Site Subject to Lighting and Communication Constraints

The NRHO used as the staging orbit for crewed missions to the lunar surface by the HLS remains nearly perpendicular to the Earth-Moon line of sight, however, due to the libration of the Moon the location of the South Pole is ever shifting beneath it. DTE communication as well as ground illumination conditions near the South Pole coincide with lunar libration, with approximately 2-week cycles of DTE communication and solar availability. Additionally, the constant shifting of the South Pole region with respect to the NRHO leads to variations in the nominal HLS approach path to the surface in order to maintain near in-plane alignment of the NRHO, LLO, and approach phase. Making adjustments to the nominal approach path to achieve desired communication and lighting conditions quickly raises in-space ΔV. This analysis compares the ΔV impact of several trajectory strategies that could be used to alter the HLS approach path.

HLS↗

NASA NTRSDate not supplied

Analysis of the Approach Direction of the Human Landing System to a South Pole Landing Site Subject to Lighting and Communication Constraints

The NRHO used as the staging orbit for crewed missions to the lunar surface by the HLS remains nearly perpendicular to the Earth-Moon line of sight, however, due to the libration of the Moon the location of the South Pole is ever shifting beneath it. DTE communication as well as ground illumination conditions near the South Pole coincide with lunar libration, with approximately 2-week cycles of DTE communication and solar availability. Additionally, the constant shifting of the South Pole region with respect to the NRHO leads to variations in the nominal HLS approach path to the surface in order to maintain near in-plane alignment of the NRHO, LLO, and approach phase. Making adjustments to the nominal approach path to achieve desired communication and lighting conditions quickly raises in-space ∆V. This analysis compares the ∆V impact of several trajectory strategies that could be used to alter the HLS approach path.

HLS↗

NASA NTRSDate not supplied

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Advanced Air Mobility (AAM) encompasses a broad vision for air transportation, including Urban Air Mobility (UAM) as a subset. AAM aims to create a more connected and efficient transportation network across various geographical settings. However, navigating AAM aircraft in GPS-denied or degraded environments during approach and landing is challenging. Traditional vision aids like glideslopes and localizers are limited in vertiport environments due to narrow beam constraints and reduced landing angle options. This paper addresses the need for accurate navigation solutions at vertiports by proposing a vision-based distributed sensing (VIDIS) system utilizing cameras with bundle adjustment to assist incoming AAM aircraft during approach and landing while monitoring surface movements to enhance safety and efficiency. Key focus areas for current and future vertiport developers include identifying suitable sensor types and infrastructure standards to support AAM operations and including vertiport markings as vision-based navigation aids. The proposed system offers a novel approach to overcoming navigation challenges in AAM operations, particularly in urban settings where traditional aids may be insufficient. Preliminary simulation results with distributed cameras demonstrate promising outcomes for implementing bundle adjustment techniques to enhance vision-based navigation solutions at vertiports. Generating waypoint-based trajectories via waypoint integration using explicit guidance synthesis (WINGS) creates smooth AAM trajectories for landing at vertiports by using the current waypoint's terminal conditions as the initial conditions for the next waypoint. Combining bundle adjustment's ground-based solution of vertiport features with WINGS, Coplanar Pose from Orthography and Scaling with Iterations (COPOSIT), and an extended Kalman filter (EKF) estimates the state of an incoming aircraft during approach and landing at vertiports. Future work includes testing VIDIS in a high-fidelity simulation and with real-world data.

Distributed sensing↗

NASA NTRSDate not supplied

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Distributed sensing↗

NASA NTRS1972

Temperature effects on the strainrange partitioning approach for creep-fatigue analysis

Examination is made of the influence of temperature on the strainrange partitioning approach to creep-fatigue. Results for Cr-Mo steel and Type 316 stainless steel show the four partitioned strainrange-life relationships to be temperature insensitive to within a factor of two on cyclic life. Monotonic creep and tensile ductilities were also found to be temperature insensitive to within a factor of two. The approach provides bounds on cyclic life that can be readily established for any type of inelastic strain cycle. Continuous strain cycling results obtained over a broad range of high temperatures and frequencies are in excellent agreement with bounds provided by the approach. The observed transition from one bound to the other is also in good agreement with the approach.

Halford, G. R.↗

NASA NTRS1973

Initial flight and simulator evaluation of a head up display for standard and noise abatement visual approaches

A preliminary assessment was made of the adequacy of a simple head up display (HUD) for providing vertical guidance for flying noise abatement and standard visual approaches in a jet transport. The HUD featured gyro-stabilized approach angle scales which display the angle of declination to any point on the ground and a horizontal flight path bar which aids the pilot in his control of the aircraft flight path angle. Thirty-three standard and noise abatement approaches were flown in a Boeing 747 aircraft equipped with a head up display. The HUD was also simulated in a research simulator. The simulator was used to familiarize the pilots with the display and to determine the most suitable way to use the HUD for making high capture noise abatement approaches. Preliminary flight and simulator data are presented and problem areas that require further investigation are identified.

Bourquin, K.↗

NASA NTRS1973

Space shuttle GN and C equation document no. 23: Energy dissipation rate guidance for approach phase

The approach guidance routine for taking the space shuttle orbiter from the entry phase of approximately 100,000 feet to the start of the final landing maneuver is discussed. The approach guidance system is a closed feedback loop scheme. The vehicle energy is managed by controlling the rate at which energy is dissipated during a straight in approach. The spacecraft performance during each segment of the approach flight is analyzed. Equations of motion are developed to describe the spacecraft guidance and flight path.

Elias, A.↗

NASA NTRS1972

Head-up displays for STOL visual approaches

A simulation study was conducted to determine the effectiveness of a simple head-up display in improving glide-slope tracking performance during steep visual approaches in a STOL aircraft. The head-up display featured an attitude-stabilized horizon bar and glide-slope reference bar parallel to and 7.5 deg below the horizon bar. On some approaches a flight-path marker symbol showing the projected ground impact point was also displayed. Half of the approaches were flown in a conventional mode in which the pilot changed pitch attitude to correct for height errors. The remaining approaches were flown in a direct-lift mode in which the pilot modulated thrust to change the flight-path angle without pitching the aircraft.

Palmer, E. A.↗

NASA NTRS1974

Noise measurements obtained during engineering evaluation of two-segment approaches in a 727-200 aircraft

A series of noise measurements were made during engineering evaluation tests of two-segment approaches in a 727-200 aircraft equipped with acoustically treated nacelles. A two-segment approach having a 6-degree upper glide slope angle intercepting the Instrument Landing System (ILS) 2.9-degree glide slope at an altitude of 690 feet gave a 5-EPNdB decrease in measured noise at distances greater than 3 nautical miles from the runway threshold when compared with a normal ILS approach. Several of the noise measurements were taken under adverse weather conditions which were outside the specified limits of FAR Part 36. This may introduce uncertainties into the data from several approaches.

Tanner, C. S.↗

NASA NTRS1974

Curved descending landing approach guidance and control

Linear optimal regulator theory is applied to a nonlinear simulation of a transport aircraft performing a helical landing approach. A closed form expression for the quasi-steady nominal flight path is presented along with the method for determining the corresponding constant nominal control inputs. The Jacobian matrices and the weighting matrices in the cost functional are time varying. A method of solving for the optimal feedback gains is reviewed. The control system is tested on several alternative landing approaches using both three and six degree flight path angles. On each landing approach, the aircraft was subjected to large random initial state errors and to randomly directed crosswinds. The system was also tested for sensitivity to changes in the parameters of the aircraft and of the atmosphere. Performance of the optimal controller on all the three degree approaches was very good, and the control system proved to be reasonably insensitive to parametric uncertainties.

Crawford, D. J.↗

NASA NTRS1974

The Out of Service Guest Pilot Evaluation of the Two-segment Noise Abatement Approach in the Boeing B727-200

Guest pilot evaluation results of an approach profile modification for reducing ground level noise under the approach of jet aircraft runways are reported. Evaluation results were used to develop a two segmented landing approach procedure and equipment necessary to obtain pilot, airline, and FAA acceptance of the two segmented flight as a routine way of operating aircraft on approach and landing. Data are given on pilot workload and acceptance of the procedure.

Nylen, W. E.↗

NASA NTRS1976

A piloted-simulation evaluation of two electronic display formats for approach and landing

The results of a piloted-simulation evaluation of the benefits of adding runway symbology and track information to a baseline electronic-attitude-director-indicator (EADI) format for the approach-to-landing task were presented. The evaluation was conducted for the baseline format and for the baseline format with the added symbology during 3 deg straight-in approaches with calm, cross-wind, and turbulence conditions. Flight-path performance data and pilot subjective comments were examined with regard to the pilot's tracking performance and mental workload for both display formats. The results show that the addition of a perspective runway image and relative track information to a basic situation-information EADI format improve the tracking performance both laterally and vertically during an approach-to-landing task and that the mental workload required to assess the approach situation was thus reduced as a result of integration of information.

Steinmetz, G. G.↗

NASA NTRS1976

Orbiter altitude at ALT interface based on ALSES (Approach and Landing Shuttle Engineering Simulation) analyses. Mission planning, mission analysis and software formulation

The details of the orbiter altitude attainable at the approach and landing tests (ALT) interface determined by the approach and landing shuttle engineering simulation (manned) were documented. The analysis culminated in the verification of the trends observed in a similar analysis performed previously on the space vehicle dynamics simulation (unmanned). Altitude variations attributable to pilot steering variability ranged between 492 ft higher to 383 ft lower. The requirement for this parametric analysis is first elaborated. The specifications, assumptions, and analytical approach used to determine the orbiter altitude at the ALT interface are then presented, followed by the results of the analytical approach and the conclusions and recommendations.

Colwell, C. L.↗

NASA NTRS1977

Formulation of consumables management models. Development approach for the mission planning processor working model

The mission planning processor is a user oriented tool for consumables management and is part of the total consumables subsystem management concept. The approach to be used in developing a working model of the mission planning processor is documented. The approach includes top-down design, structured programming techniques, and application of NASA approved software development standards. This development approach: (1) promotes cost effective software development, (2) enhances the quality and reliability of the working model, (3) encourages the sharing of the working model through a standard approach, and (4) promotes portability of the working model to other computer systems.

Connelly, L. C.↗

NASA NTRS1977

Application of NASA-ARC delayed flap approach procedures to Boeing 727 airplane

The results of an engineering and piloted simulator study to adapt a NASA developed-approach energy management system (AEMS) concept to the B727 are presented. The AEMS concept was developed and flight tested on a CV-990. The purpose of the AEMS is to reduce approach time, fuel, and noise by providing computer-driven cockpit displays to assist the pilot in flying optimized delayed flap approach (DFA) procedures. Development of the DFA flight profiles, the AEMS airborne digital computer algorithm, and associated cockpit displays were studied. Study ground rules and pertinent aerodynamic and noise trend data used in developing the flight profiles are presented. Approach time, fuel, and noise for the DFA are compared to several other types of procedures.

Allison, R. L.↗

NASA NTRS1976

The 727 approach energy management system avionics specification (preliminary)

Hardware and software requirements for an Approach Energy Management System (AEMS) consisting of an airborne digital computer and cockpit displays are presented. The displays provide the pilot with a visual indication of when to manually operate the gear, flaps, and throttles during a delayed flap approach so as to reduce approach time, fuel consumption, and community noise. The AEMS is an independent system that does not interact with other navigation or control systems, and is compatible with manually flown or autopilot coupled approaches. Operational use of the AEMS requires a DME ground station colocated with the flight path reference.

Jackson, D. O.↗

NASA NTRS1977

Noise data for a twin-engine commercial jet aircraft flying conventional, steep, and two-segment approaches

Center-line noise measurements of a twin-engine commercial jet aircraft were made during steep landing approach profiles, and during two-segment approach profiles for comparison with similar measurements made during conventional approaches. The steep and two-segment approaches showed significant noise reductions when compared with the -3 deg base line. The measured noise data were also used to develop a method for estimating the noise under the test aircraft at thrust and altitude conditions typical of current landing procedures and of landing procedures under development for the Advanced Air Traffic Control System.

Hastings, E. C., Jr.↗