Search NASA⌕ Search

SEARCH · Search NASA

Results for “BEARINGS - FRICTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A Tracer Study on sCO2 Corrosion with Multiple Oxygen-Bearing Impurities

Abstract Several modern power production systems utilize supercritical CO 2 (sCO 2 ), which can contain O 2 and H 2 O as impurities. These impurities may degrade the compatibility of structural alloys through accelerated oxidation. However, it remains unclear which of these impurities plays a bigger role in high-temperature reactions taking place in sCO 2 . In this study, various model and commercial Fe‐ and Ni‐based alloys were exposed in 300 bar sCO 2 at 750 °C to low levels (50 ppm) of O 2 and H 2 O for 1,000 h. 18 O-enriched water was used to enable the identification of the oxygen source in the post-exposure characterization of the samples. However, oxygen from the water did not accumulate in the scale, which consisted of Cr 2 O 3 in the cases where a protective oxide formed. A 2wt.% Ti addition to a Ni-22%Cr model alloy resulted in the formation of thicker oxides in sCO 2 , while a 1wt.% Al addition reduced the scale thickness. A synergistic effect of both Al and Ti additions resulted in an even thicker oxide than what was formed solely by Ti, similar to observations for Ni-based alloy 282.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reactivity in cement pastes bearing fine fraction concrete and glass from construction and demolition waste: Microstructural analysis of viability

Converting construction and demolition waste (CDW) into secondary raw materials is one of the priorities of environmental policy and circular economy strategy. This study analysed the variation in eco-efficient paste reactivity with OPC replacement ratio (5% to 10%) and hydration time (2 d, 28 d and 90 d). Three types of CDW were explored: two (calcareous and siliceous) consisting of fine (4 AH{sub 13} and C{sub 4}AcH{sub 11}, ettringite and portlandite, were the same as observed in OPC hydration. These findings attest to the scientific viability recycling such CDWs as mineral additions in eco-cement manufacture and consequently eliminating the need for stockpiling these materials at recycling/storage plants.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Simulation of axial tensile well deformation during reservoir compaction in offshore unconsolidated methane hydrate-bearing formation

Sand production encountered in the 2013 offshore field gas production tests at the Nankai Trough, Japan, could be attributed to well failure during reservoir compaction. In this study, well integrity under various reservoir compaction patterns for the Nankai Trough case is examined using a well-formation finite element model. Here, the modelling details include the inclusion of a cement sheath as well as the modelling of construction processes (such as cement shrinkage). Well elongation in the overburden layer becomes significant when the reservoir subsidence is localized near the wellbore under large depressurization. Results show that the maximum plastic deviatoric strain level in the cement could reach 0.7% when the maximum reservoir subsidence reaches 0.85 m and cement shrinkage is limited. When cement shrinkage rises to 0.75%, the maximum plastic deviatoric strain increases to 2.4% as the cement accumulates additional plastic strain during shrinkage due to its deformation being constrained by the casing. In order to prevent the cement from failure, it might be effective to hold the pressure drawdown at a low level (e.g., several MPa) until the hydrate dissociation front advances to a certain radius from the well (e.g., a couple of tens of metres).

58 GEOSCIENCES↗
DOE OSTI2022

Degradation mechanism of blended cement pastes in sulfate-bearing environments under applied electric fields: Sulfate attack vs. decalcification

Applied electric fields, the reason behind stray currents, accelerate the ingress of sulfate into cementitious materials. To identify mitigation approaches, this study investigates the effects of slag and fly ash on sodium sulfate attacks of cement pastes under a constant electric current. The mineralogical alterations induced by the attacks were analyzed using X-ray diffractometry, thermogravimetric analysis, scanning electron microscopy, and thermodynamic modeling. The dissolution of aluminates in the slag and fly ash induced a monosulfate-rich area (>~20 mm from the cathode surface) to form next to the ettringite-rich area on the sample surface (<~20 mm). This effect reduced the availability of SO 4 2– in the pore solution, thereby hindering the penetration of sulfate. Meanwhile, the consumption of portlandite by the pozzolanic reaction lowered the decalcification resistance of the materials. This produced a wide area that endured the decomposition of portlandite and carbonate-AFm. Altogether, blending 30% fly ash did not improve the resistance of the material to either sulfate attacks or decalcification; blending 50% slag can effectively mitigate sulfate ingress, though decalcification may become a governing mechanism in the degradation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Corrosion characteristics of silicon carbide fiber-reinforced composites in beryllium-bearing molten fluoride salt

Corrosion of SiC-fiber reinforced SiC matrix composites in 2LiF-BeF 2 molten salt was examined following static molten salt exposure for 1000 h at 650 and 750 °C. Composites were fabricated with either Tyranno SA3 or Hi-Nicalon type-S fibers and a chemical vapor infiltration SiC matrix. Both composites showed minimal weight loss after salt exposure and maintained shape. Corrosion was characterized by comprehensive electron microscopy and Raman spectroscopy. In conclusion, based on the results of experimental and thermodynamic analysis, a corrosion mechanism for SiC/SiC is proposed where both the salt and SiC materials play a key role in the phase stability of the composite.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhance the performance of organic solar cells by nonfused ring electron acceptors bearing a pendent perylenediimide group

A new nonfused ring electron acceptor PDI-DO-2F is designed and synthesized by attaching perylenediimide (PDI) unit as a pendent group to the central donor core. Compared with the control molecule DO-2F, the introduction of PDI lateral substituent can greatly enhance the solubility and decrease the crystallinity of the resulted acceptor. The PBDB-T:PDI-DO-2F blend film exhibits a much better morphology with higher and more balanced carrier mobility in contrast to PBDB-T:DO-2F one. PDI-DO-2F based organic solar cells (OSCs) give a power conversion efficiency (PCE) of 11.78%, higher than DO-2F based ones (9.82%). Furthermore, PDI-DO-2F based OSCs shows a ΔE non-rad value of 0.23 eV, which is significantly lower than the DO-2F based ones (0.28 eV). More importantly, the addition of PDI-DO-2F as the third component to the PBDB-T:DO-2F binary system can optimize the morphology of blend films and improve the shelf stability of devices. Finally, the PBDB-T:DO-2F:PDI-DO-2F based ternary OSCs achieve a higher PCE of 13.82%.

14 SOLAR ENERGY↗