Search NASA⌕ Search

SEARCH · Search NASA

Results for “Boosting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

SU-G-JeP4-10: Measurement of Prostate Motion Trajectories During Prostate SBRT Boost Treatments with a Rectafix

Purpose: To determine prostate motion during SBRT boost treatments with a Rectafix rectal sparing device in place using kV imaging during treatment. Methods: Patients each had three gold fiducial markers inserted into the prostate and received two VMAT boost fractions of 9.5–10 Gy under the PROMETHEUS clinical trial protocol with a Rectafix rectal retractor in place. Two-dimensional kilovoltage images of fiducial markers were acquired continuously during delivery. Three patients were treated on a Varian Clinac iX linear accelerator (6X, 600 MU/min), where kV images were acquired at 5 Hz during treatment. Seven patients were treated on a Varian Truebeam linear accelerator (10XFFF, 2400 MU/min) where kV images were acquired every 3 seconds. Images were processed off-line using the Kilovoltage Intrafraction Monitoring (KIM) software after treatment. KIM determines prostate position in three dimensions from 2D kV projections using a probability density model and a pre-treatment kV arc. The 3D displacement of the prostate was quantified as a function of time throughout each fraction. Results: From all fractions analyzed, it was found that the prostate had moved less than 1 mm in any direction from its initial position 84.6% of the time. The prostate was between 1 and 2 mm from its initial position 14.2% of the time, between 2 and 3 mm of its initial position 0.8% of the time and was greater than 3 mm from its initial position only 0.4% of the time. Conclusion: The amount of prostate motion observed during prostate SBRT boost treatments with a Rectafix device in place was minimal and lower than that observed in non-Rectafix studies. The Rectafix device reduces rectal dose as well as immobilizing the prostate. Kimberley Legge is the recipient of an Australian Postgraduate Award.

60 APPLIED LIFE SCIENCES↗

On generation of boost pairs by a constant electric field

The problem of quantization of a complex scalar field in an external constant uniform electric field is considered in the basis of boost modes. The in- and out-regions in the Minkowski space are deter-mined, and the complete sets of in- and out boost modes describing particles and antiparticles are constructed. The number of boost pairs generated by the field from vacuum in each mode, as well as the total number of produced particles, is calculated.

79 ASTRONOMY AND ASTROPHYSICS↗

A new method to distinguish hadronically decaying boosted Z bosons from W bosons using the ATLAS detector

The distribution of particles inside hadronic jets produced in the decay of boosted W and Z bosons can be used to discriminate such jets from the continuum background. Given that a jet has been identified as likely resulting from the hadronic decay of a boosted W or Z boson, this paper presents a technique for further differentiating Z bosons from W bosons. The variables used are jet mass, jet charge, and a b-tagging discriminant. A likelihood tagger is constructed from these variables and tested in the simulation of W' → WZ for bosons in the transverse momentum range 200 GeV < p T < 400 GeV in s= 8 TeV pp collisions with the ATLAS detector at the LHC. For Z-boson tagging efficiencies of ϵ Z = 90 , 50, and 10 % , one can achieve W + -boson tagging rejection factors (1 / ϵ W+ ) of 1.7, 8.3 and 1000, respectively. It is not possible to measure these efficiencies in the data due to the lack of a pure sample of high p T , hadronically decaying Z bosons. However, the modelling of the tagger inputs for boosted W bosons is studied in data using a tt¯ -enriched sample of events in 20.3 fb - 1 of data at √s= 8 TeV. The inputs are well modelled within uncertainties, which builds confidence in the expected tagger performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fair Bagging Boosting Models [SWR-24-38]

Fair Bagging Boosting Models is a software implementation of a framework for building, measuring bias and correcting bias in 3 popular forest machine learning models: gradient boosted trees (GBT), random forest (RF), and XGBoost models, using the XGBoost library. The framework takes advantage of the flexibility in XGBoost library to represent gradient boosted tree and random forest models, as well as the ability to use custom loss function.

Ugirumurera, Juliette↗

Extreme Miller cycle with high intake boost for improved efficiency and emissions in heavy-duty diesel engines

This study experimentally investigates the impact of extreme Miller cycle strategies paired with high intake manifold pressures on the combustion process, emissions, and thermal efficiency of heavy-duty diesel engines. Well-controlled experiments isolating the effect of Miller cycle strategies on the combustion process were conducted at constant engine speed and load (1160 rpm, 1.76 MPa net IMEP) on a single cylinder research engine equipped with a fully-flexible hydraulic valve train system. Late intake valve closing (LIVC) timing strategies were compared to a conventional intake valve profile under either constant cylinder composition, constant engine-out NO x emission, or constant overall turbocharger efficiency (η TC ) to investigate the operating constraints that favor Miller cycle operation over the baseline strategy. Furthermore, utilizing high boost with conventional intake valve closing timing resulted in improved fuel consumption at the expense of sharp increases in peak cylinder pressures, engine-out NO x emissions, and reduced exhaust temperatures. Miller cycle without EGR at constant λ demonstrated LIVC strategies effectively reduce engine-out NO x emissions by up to 35%. However, Miller cycle associated with very aggressive LIVC timings led to fuel consumption penalties due to increased pumping work and exhaust enthalpy. LIVC strategies allowed for increased charge dilution at the baseline NO x constraint of 3.2 g/kWh, resulting in significant fuel consumption benefits over the baseline case without compromising exhaust temperatures or peak cylinder pressures. As Miller cycle implementation was shown to affect the boundary conditions dictating η TC , the LIVC and conventional IVC cases were studied at an equivalent η TC point representative of high boost operation. With high boost, LIVC yielded reduced NO x emissions, reduced peak cylinder pressures, and elevated exhaust temperatures compared to the conventional IVC case without compromising fuel consumption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

An evaluation of a hubless inducer and a full flow hydraulic turbine driven inducer boost pump

The purpose of the study was to compare the performance of several configurations of hubless inducers with a hydrodynamically similar conventional inducer and to demonstrate the performance of a full flow hydraulic turbine driven inducer boost pump using these inducers. A boost pump of this type consists of an inducer connected to a hydraulic turbine with a high speed rotor located in between. All the flow passes through the inducer, rotor, and hydraulic turbine, then into the main pump. The rotor, which is attached to the main pump shaft, provides the input power to drive the hydraulic turbine which, in turn, drives the inducer. The inducer, rotating at a lower speed, develops the necessary head to prevent rotor cavitation. The rotor speed is consistent with present main engine liquid hydrogen pump designs and the overall boost pump head rise is sufficient to provide adequate main pump suction head. This system would have the potential for operating at lower liquid hydrogen tank pressures.

Lindley, B. K.↗

Boosted performance of a compression-ignition engine with a displaced piston

Performance tests were made using a rectangular displacer arranged so that the combustion air was forced through equal passages at either end of the displacer into the vertical-disk combustion chamber of a single-cylinder, four-stroke-cycle compression-ignition test engine. After making tests to determine optimum displacer height, shape, and fuel-spray arrangement, engine-performance tests were made at 1,500 and 2,000 r.p.m. for a range of boost pressures from 0 to 20 inches of mercury and for maximum cylinder pressures up to 1,150 pounds per square inch. The engine operation for boosted conditions was very smooth, there being no combustion shock even at the highest maximum cylinder pressures. Indicated mean effective pressures of 240 pounds per square inch for fuel consumptions of 0.39 pound per horsepower-hour have been readily reproduced during routine testing at 2,000 r.p.m. at a boost pressure of 20 inches of mercury.

Moore, Charles S↗

Energy Management of Manned Boost-Glide Vehicles: A Historical Perspective

As flight progressed from propellers to jets to rockets, the propulsive energy grew exponentially. With the development of rocket-only boosted vehicles, energy management of these boost-gliders became a distinct requirement for the unpowered return to base, alternate landing site, or water-parachute landing, starting with the X-series rocket aircraft and terminating with the present-day Shuttle. The problem presented here consists of: speed (kinetic energy) - altitude (potential energy) - steep glide angles created by low lift-to-drag ratios (L/D) - distance to landing site - and the bothersome effects of the atmospheric characteristics varying with altitude. The primary discussion regards post-boost, stabilized glides; however, the effects of centrifugal and geopotential acceleration are discussed as well. The aircraft and spacecraft discussed here are the X-1, X-2, X-15, and the Shuttle; and to a lesser, comparative extent, Mercury, Gemini, Apollo, and lifting bodies. The footprints, landfalls, and methods developed for energy management are also described. The essential tools required for energy management - simulator planning, instrumentation, radar, telemetry, extended land or water range, Mission Control Center (with specialist controllers), and emergency alternate landing sites - were first established through development of early concepts and were then validated by research flight tests.

Day, Richard E.↗

Changes in the TRMM Version-5 and Version-6 Precipitation Radar Products Due to Orbit Boost

The performance of the version-5 and version-6 Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) products before and after the satellite orbit boost is assessed through a series of comparisons with Weather Surveillance Radar (WSR)-88D ground-based radar in Melbourne, Florida. Analysis of the comparisons of radar reflectivity near the storm top from the ground radar and both versions of the PR indicates that the PR bias relative to the WSR radar at Melbourne is on the order of 1dB for both pre- and post-boost periods, indicating that the PR products maintain accurate calibration after the orbit boost. Comparisons with the WSR-88D near-surface reflectivity factors indicate that both versions of the PR products accurately correct for attenuation in stratiform rain. However, in convective rain, both versions exhibit negative biases in the near-surface radar reflectivity with version-6 products having larger negative biases than version-5. Rain rate comparisons between the ground and space radars show similar characteristics

Liao, Liang↗

CHANGO: A Software Tool for Boost Stage Guidance of the Space Launch System Exploration Mission 1

The Day of Launch Initiation Load Update (DOLILU) System is the means by which the Space Launch System (SLS) Vehicle trajectory is designed, verified, and uploaded on the Day of Launch (DOL) in order to ensure a safe flight. Launch vehicles are designed to fly down a narrow angle of attack and sideslip angle corridor in order to keep them within structural load limits. The angle of attack and sideslip angle response to the launch vehicle experiences can vary significantly based upon the winds experienced on the DOL. SLS Boost Stage flight employs an open-loop guidance scheme through Solid Rocket Booster (SRB) separation. In the SLS open-loop scheme, the vehicle will fly a prescribed set of attitudes as a function of the change in altitude since launch. This set of reference attitude values and corresponding altitude reference independent values are designed with ground software using winds measured on the DOL with the goal of minimizing angle of attack and sideslip angle, thereby minimizing related ascent integrated vehicle structural loads. The table of Boost Stage attitude commands as a function of altitude gained since launch is called the chi table. A software tool called CHANGO (Chi Angle Optimizer) designs the Boost Stage chi table which is uploaded to the vehicle’s flight computer and used during ascent by the flight software (FSW). The wind and atmospheric conditions are measured prior to launch and pre-processed to become input to the CHANGO software along with a set of parameters developed in advance of the DOL. CHANGO’s target set consists of the heading and altitude rate at SRB separation determined well before launch by the Program to Optimize Simulated Trajectories (POST). CHANGO consists of a simplified three degree-of-freedom (3-DOF) simulation representing the SLS launch configuration. In general, the launch azimuth is strongly correlated with the heading at SRB separation, and the initial pitchover rate is strongly correlated with the altitude rate at SRB separation. CHANGO uses an adaptation of Powell’s method to vary the initial pitchover rate and launch azimuth to solve a 2-dimentional minimization problem. CHANGO’s trajectory simulation is phase-based, with flight events separating the phases. Each flight phase has different attitude alignment logic. CHANGO’s 3-DOF simulation starts when the vehicle’s thrust-to-weight ratio equals one, and ends at a pre-calculated SRB separation time.

Ahmad, Naeem↗

Methodology and Development of SLS Ascent Boost Phase Loads

The methodologies and development of the loads experienced in the boost phase of ascent flight of the NASA Space Launch System (SLS) Block I vehicle will be presented in this paper. As is common practice, a series of fixed time/mass finite element models of the vehicle were developed for the purpose of evaluating the structural loads and accelerations for particular Mach ranges associated with the boost phase of flight. Load contributors, which vary between Mach bins, include the flight mechanics induced portion of the loads (e.g., Static-Elastic (STEL) or Vehicle Load Indicator (VLI) tool results), gust loads, buffet loads, solid rocket motor thrust oscillations, maneuvering loads, and preplanned test input induced loads. Each of these load contributors will be examined in this paper, as well as the boost phase loads combination equation used to generate the final loads.

SLS↗

Effects of Hyperbolic Rotation in Minkowski Space on the Modeling of Plasma Accelerators in a Lorentz Boosted Frame

Laser driven plasma accelerators promise much shorter particle accelerators but their development requires detailed simulations that challenge or exceed current capabilities. We report the first direct simulations of stages up to 1 TeV from simulations using a Lorentz boosted calculation frame resulting in a million times speedup, thanks to a frame boost as high as gamma = 1300. Effects of the hyperbolic rotation in Minkowski space resulting from the frame boost on the laser propagation in the plasma is shown to be key in the mitigation of a numerical instability that was limiting previous attempts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Convergence in nonlinear laser wakefield accelerators modeling in a Lorentz-boosted frame

Laser wakefield acceleration modeling using the Lorentz-boosted frame technique in the particle-in-cell code has demonstrated orders of magnitude speedups. A convergence study was previously conducted in cases with external injection in the linear regime and without injection in the nonlinear regime, and the obtained results have shown a convergence within the percentage level. Here, a convergence study is carried out to model electron self-injection in a 2D–3V configuration. It is observed that the Lorentz-boosted frame technique is capable of modeling complex particle dynamics with a significant speedup. This result is crucial to curtail the computational time of the modeling of future chains of laser wakefield accelerator stages with high accuracy.

43 PARTICLE ACCELERATORS↗

Economic analysis of the benefits to petroleum refiners for low carbon boosted spark ignition biofuels

A refinery modeling framework is developed to estimate the benefits of blending high-quality biofuels directly with refinery gasoline components for attaining a premium grade fuel (also termed as Co-Optima Boosted SI gasoline here). Our results change the paradigm of bio-blendstocks (BBs) being competitors to fossil components, by identifying opportunities for refineries to add value to their product slate, from some favorable BB properties. This potential value can be characterized by calculating the breakeven value (BEV), as defined down below. The proposed modeling framework incorporates extensive data from (1) projected product over the next few decades, (2) crude oil and refinery products pricing, and (3) fuel specifications. The complete refinery models serve as a basis for assessing the value of biofuels, assuming profitability remains the same for representative petroleum refinery configurations. Our assessment showed wide range of variation of biofuels BEV from $\$$20-$\$$120/bbl, within the considered blending level and crude prices. Further, the BEV was correlated with the fuel octane ratings such as octane numbers (research, RON and motor octane numbers, MON) and both antiknock index (AKI, average of RON and MON) and sensitivity (S, difference between RON and MON), with a slightly higher correlation with the sensitivity. However, the expected decrease in gasoline demand for the upcoming years could negatively impact biofuels demand and value, in a business-as-usual scenario. Our analysis also showed a more valuable bio-blendstocks incorporation in smaller refineries since they can enhance the capabilities for producing specialty, high-value fuels/products, and introduce high octane-barrels into otherwise constrained blending operations. Additional implications towards refiners include opportunities to rebalance operations, access to high-value fuel markets, and synchronization with broader transportation industry trends. Furthermore, results indicate the value of Co-Optima boosted spark ignition (BSI) efficiency gains can extend to refiners to incentivize decarbonization and diversified feedstock production.

09 BIOMASS FUELS↗

Boosting Barlow Twins Reduced Order Modeling for Machine Learning‐Based Surrogate Models in Multiphase Flow Problems

Abstract We present an innovative approach called boosting Barlow Twins reduced order modeling (BBT‐ROM) to enhance the reliability of machine learning surrogate models for multiphase flow problems. BBT‐ROM builds upon Barlow Twins reduced order modeling that leverages self‐supervised learning to effectively handle linear and nonlinear manifolds by constructing well‐structured latent spaces of input parameters and output quantities. To address the challenge of high contrast data in multiphase flow problems due to injection wells and faults, we employ a boosting algorithm within BBT‐ROM. This algorithm sequentially trains a set of weak models (i.e., inaccurate models), improving prediction accuracy through ensemble learning. To evaluate the performance of BBT‐ROM, we conduct three three‐dimensional multiphase flow problems, including waterflooding and geologic carbon storage (GCS), with varying numbers of input parameter cases and model domain features. The results demonstrate that BBT‐ROM excels at predicting non‐wetting phase saturation (e.g., oil or saturation) and fluid pressure, with average relative errors ranging from 0.5% to 3%. Importantly, BBT‐ROM showcases robustness when faced with limited input parameter space during GCS testing.

58 GEOSCIENCES↗

Anode Boosted Electrolyzer

The aim of this project is to develop an anode catalyst and anolyte delivery system in renewably powered flow-electrolyzers that utilize waste carbon dissolved in non-potable process water as the anolyte to lower the overall cell potential at which hydrogen is generated (Anode-Boosting) while simultaneously purifying a non-potable water source. This project spans several of the desired aspects in the Renewable Hydrogen Transportation Fuel Pathways of interest: it combines renewably sourced energy with waste hydrocarbons, leading to enhanced water-splitting and eventual delivery and distribution of hydrogen for use in fuel cell powered transportation. Deployment of an Anode-Boosted Electrolysis process will provide a significant improvement in the effective energy efficiency for the generation of hydrogen due to a reduced cell potential and the desirable removal of organic impurities in waste water, offering a route to generating clean hydrogen and clean(er) water.

08 HYDROGEN↗

Imputing data that are missing at high rates using a boosting algorithm

Traditional multiple imputation approaches may perform poorly for datasets with high rates of missingness unless many m imputations are used. This paper implements an alternative machine learning-based approach to imputing data that are missing at high rates. Here, we use boosting to create a strong learner from a weak learner fitted to a dataset missing many observations. This approach may be applied to a variety of types of learners (models). The approach is demonstrated by application to a spatiotemporal dataset for predicting dengue outbreaks in India from meteorological covariates. A Bayesian spatiotemporal CAR model is boosted to produce imputations, and the overall RMSE from a k-fold cross-validation is used to assess imputation accuracy.

97 MATHEMATICS AND COMPUTING↗

Defect‐Tailoring Mediated Electron–Hole Separation in Single‐Unit‐Cell Bi 3 O 4 Br Nanosheets for Boosting Photocatalytic Hydrogen Evolution and Nitrogen Fixation

Abstract Solar photocatalysis is a potential solution to satisfying energy demand and its resulting environmental impact. However, the low electron–hole separation efficiency in semiconductors has slowed the development of this technology. The effect of defects on electron–hole separation is not always clear. A model atomically thin structure of single‐unit‐cell Bi 3 O 4 Br nanosheets with surface defects is proposed to boost photocatalytic efficiency by simultaneously promoting bulk‐ and surface‐charge separation. Defect‐rich single‐unit‐cell Bi 3 O 4 Br displays 4.9 and 30.9 times enhanced photocatalytic hydrogen evolution and nitrogen fixation activity, respectively, than bulk Bi 3 O 4 Br. After the preparation of single‐unit‐cell structure, the bismuth defects are controlled to tune the oxygen defects. Benefiting from the unique single‐unit‐cell architecture and defects, the local atomic arrangement and electronic structure are tuned so as to greatly increase the charge separation efficiency and subsequently boost photocatalytic activity. This strategy provides an accessible pathway for next‐generation photocatalysts.

Di, Jun↗