Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARBON COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Organic chemistry of Murchison meteorite: Carbon isotopic fractionation

The carbon isotopic composition of individual organic compounds of meteoritic origin remains unknown, as most reported carbon isotopic ratios are for bulk carbon or solvent extractable fractions. The researchers managed to determine the carbon isotopic ratios for individual hydrocarbons and monocarboxylic acids isolated from a Murchison sample by a freeze-thaw-ultrasonication technique. The abundances of monocarboxylic acids and saturated hydrocarbons decreased with increasing carbon number and the acids are more abundant than the hydrocarbon with the same carbon number. For both classes of compounds, the C-13 to C-12 ratios decreased with increasing carbon number in a roughly parallel manner, and each carboxylic acid exhibits a higher isotopic number than the hydrocarbon containing the same number of carbon atoms. These trends are consistent with a kinetically controlled synthesis of higher homologues for lower ones.

Yuen, G. U.↗

SSME Main Combustion Chamber (MCC) 'Hot Oil' Dewaxing

In an attempt to comply with the changing environmental regulations, a process was developed for the replacement of perchloroethylene in the dewaxing of the Space Shuttle Main Engine (SSME) Main Combustion Chamber (MCC) and other associated hardware filled with the Rigidax(registered mark) casting compound. Rigidax(registered mark) is a hard blue-dyed, calcium carbonate filled thermoplastic casting compound (melting point 77 C) that is melted and poured into hardware cavities to prevent contamination during material removal processes, i.e. machining, grinding, drilling, and deburring. Additionally, it serves as a maskant for designated areas during electroforming processes. Laboratory testing was conducted to evaluate seven alternate fluids for the replacement of perchloroethylene in the dewaxing process. Based upon successful laboratory results, a mineral oil was selected for testing on actual hardware. The final process developed involves simultaneous immersion and flushing of the MCC channels using a distinct eight stage process. A nonvolatile hydrocarbon analysis of a solvent flush sample is performed to determine the hardware cleanliness for comparison to the previous perchloroethylene dewaxing process.

Akpati, Anthony U.↗

Possible surface reactions on Mars - Implications for Viking biology results

The results of two of the three biology experiments carried out on the Viking Mars landers have been simulated. The mixture of organic compounds labeled with carbon-14 used on Mars released carbon dioxide containing carbon-14 when reacted with a simulated Martian surface and atmosphere exposed to ultraviolet light (labeled release experiment). Oxygen was released when metal peroxides or superoxides were treated with water (gas exchange experiment). The simulations suggest that the results of these two Viking experiments can be explained on the basis of reactions of the Martian surface and atmosphere.

Ponnamperuma, C.↗

Toxicity of pyrolysis gases from polyether sulfone

A sample of polyether sulfone was evaluated for toxicity of pyrolysis gases, using the toxicity screening test method developed at the University of San Francisco. Animal response times were relatively short at pyrolysis temperatures of 600 to 800 C, with death occurring within 6 min. The principal toxicant appeared to be a compound other than carbon monoxide.

Hilado, C. J.↗

Search for volatiles in the surface of icy satellites

It is proposed to measure the reflectance spectra of the icy satellites of Jupiter, Saturn and Uranus in the spectral region 1.8 to 2.4 micrometers. These observations use the new Cooled Grating Array Spectrometer using a 32-element InSb photodiode array detector and produce spectra of higher resolution and precision than any data yet obtained; the ultimate scientific objective is to search for the signatures of methane clathrate, ammonium hydroxide or carbon monoxide clathrate (compounds predicted to exist on icy surfaces in the outer solar system by several theories of formation of these bodies) in the region of the spectrum where water ice has a relative maximum in reflectance. At the very least, these data will allow upper limits to be placed on the amount of these chemical species that can be present. The specific targets is Europa, Ganymede, Enceladus, Ariel and Titania, bodies that have the highest probability of having some or all of these volatiles on their surface according to current formation models.

Brown, R. H.↗

Ignition delay times of cyclopentene oxygen argon mixtures

The oxidation of cyclopentene was studied experimentally to expand the database on pyrolysis and the reaction products of five carbon unsaturated ring compounds. Pyrolysis was carried out in a single-pulse shock tube. Data were gathered on the shock speed, wall pressure, and reflected shock temperatures. Four different mixtures of C5H8, O2 and Ar, ranging from 0.25-1 percent cyclopentene and 1.75-7 percent O2, were examined in 76 different trials. The data showed a shock temperature range of 1323-1816 K and a pressure range of 1.67-7.36 atmospheres. A student-t test analysis of the results led to definition of an ignition delay equation accurate to the 2-sigma level.

Burcat, A.↗

Bio-markers and the search for extinct life on Mars

In order to predict what biomarkers could be used on Mars, several biomarkers, or key signatures, of extinct life on earth are identified. Some of these biomarkers which may be applicable to Mars include reduced carbon and nitrogen compounds, CO3(2-), SO4(2-), NO3(-), Mg, Mn, Fe, and the isotopic ratios of C, N, and S. It is suggested that a fully equipped Mars rover might be able to perform analyses to measure most of these biomarkers while on the Martian surface.

Schwartz, D. E.↗

The strange gases of Jupiter and Saturn

The various gases found in the atmospheres of Jupiter and Saturn are discussed. A history of scientific investigation of these planets is outlined and results of these discoveries are considered. The molecular species found in these two planets are classified into several groups. The first group consists of H2, He, CH4, NH3, and H2O while the second group contains gases formed as the chemical byproducts of solar radiation, including simple hydrocarbons such as C2H2 and C2H6 and charged particles such as H3(+). The last group contains compounds which are chemically unstable in parts of Jupiter's atmosphere that have been probed and include Ge and As; two elements usually found in minerals on earth. An investigation of origin of these elements which are currently part of the upper reaches of the atmosphere of Jupiter and Saturn has led to discoveries about much deeper and hotter parts of atmospheres that can never be observed directly. A number of hypotheses are presented to account for the presence of various unexpected compounds, such as carbon monoxide.

Noll, Keith S.↗

Studies of proton irradiated H2O + CO2 and H2O + CO ices and analysis of synthesized molecules

Infrared spectra of H2O + CO2 and H2O + CO ices before and after proton irradiation showed that a major reaction in both mixtures was the interconversion of CO2 yields CO. Radiation synthesized organic compounds such as carbonic acid were identified in the H2O + CO2 ice. Different chemical pathways dominate in the H2O + CO ice in which formaldehyde, methanol, ethanol, and methane were identified. Sublimed material was also analyzed using a mass spectrometer. Implications of these results are discussed in reference to comets.

Moore, M. H.↗

Cometary origin of carbon and water on the terrestrial planets

An early high-temperature phase of the protosolar accretion disk is implied by at least three different telltales in chondrites and confirmed by peculiarities in the dust grains of Comet Halley. The existence of this high-temperature phase implies a large accretion rate hence a massive early disk. This clarifies the origin of the Kuiper Belt and of the Oort cloud, those two cometary populations of different symmetry that subsist today. Later, when the dust sedimented and was removed from the thermal equilibrium with the gas phase, a somewhat lower temperature of the disk explains the future planets' densities as well as the location beyond 2.6 AU of the carbonaceous chondrite chemistry. This lower temperature remains however large enough to require an exogenous origin for all carbon and all water now present in the earth. The later orbital diffusion of planetesimals, which is required by protoplanetary growth, is needed to explain the origin of the terrestrial biosphere (atmosphere, oceans, carbonates and organic compounds) by a veneer mostly made of comets.

Delsemme, A. H.↗

Haze Formation is an Important Sink for HCN on Titan

Titan's organic haze is potentially an important sink of photochemically produced carbon and nitrogen compounds. An assortment of microphysical haze models all suggest that the haze production rate is 10(exp -14) gm per square centimeter per second, within a factor of two. Spectral analysis of laboratory tholins compared to Titan's geometric albedo spectrum suggest that the laboratory material is a good analog to Titan's haze. The laboratory material has an elemental composition given approximately by C4H4N, with an uncertainty in the C/N ratio of a factor of two. Thus, the haze represents a sink for C of 4 x 10(exp 8) per square centimeter per second, and a sink for N of 1 x 10(exp 8) per square centimeter per second. The C sink is small compared to condensation of hydrocarbons but the sink for N is comparable to the total production rate of HCN. Because estimates of the eddy diffusion profile on Titan have been based on the HCN profile, inclusion of this additional sink for N will affect estimates for all transport processes in Titan's atmosphere.

McKay, Christopher P.↗

The Properties and Effects of Titan's Organic Haze

Titan's organic haze is the the dominant absorber of solar energy in Titan's atmosphere, creating an anti-greenhouse effect. Its variation over time may have had important implications for Titan's surface temperature. The haze is potentially an important sink of photochemically produced carbon and nitrogen compounds. Laboratory simulations and microphysical models suggest that the haze is a sink for C of 4 x 10(exp 8)/ sq cm s, and a sink for N of 1 x 10(exp 8)sq cm s. The C sink is small compared to condensation of hydrocarbons but the sink for N is comparable to the total production rate of HCN. Because estimates of the eddy diffusion profile on Titan have been based on the HCN profile, inclusion of this additional sink for N will affect estimates for all transport processes in Titan's atmosphere.

McKay, Christopher P.↗

Thermal Conductivity of Polyimide/Nanofiller Blends

In efforts to improve the thermal conductivity of Ultem(TM) 1000, it was compounded with three carbon based nano-fillers. Multiwalled carbon nanotubes (MWCNT), vapor grown carbon nanofibers (CNF) and expanded graphite (EG) were investigated. Ribbons were extruded to form samples in which the nano-fillers were aligned. Samples were also fabricated by compression molding in which the nano-fillers were randomly oriented. The thermal properties were evaluated by DSC and TGA, and the mechanical properties of the aligned samples were determined by tensile testing. The degree of dispersion and alignment of the nanoparticles were investigated with high-resolution scanning electron microscopy. The thermal conductivity of the samples was measured in both the direction of alignment as well as perpendicular to that direction using the Nanoflash technique. The results of this study will be presented.

Ghose, S.↗

Dust Spectroscopy and the Nature of Grains

Ground-based, air-borne and space-based, infrared spectra of a wide variety of objects have revealed prominent absorption and emission features due to large molecules and small dust grains. Analysis of this data reveals a highly diverse interstellar and circumstellar grain inventory, including both amorphous materials and highly crystalline compounds (silicates and carbon). This diversity points towards a wide range of physical and chemical birthsites as well as a complex processing of these grains in the interstellar medium. In this talk, I will review the dust inventory contrasting and comparing both the interstellar and circumstellar reservoirs. The focus will be on the processes that play a role in the lifecycle of dust in the interstellar medium.

Tielens, A. G. G. M.↗

Valiant 'Zero-Valent' Effort Restores Contaminated Grounds

Dense non-aqueous phase liquids (DNAPLs) are chemical compounds that can contaminate soil and groundwater to the point of irreparability. These substances are only slightly soluble in water, and are much denser than water. Because of their solubility, DNAPLs form separate liquid phases in groundwater, and because of their density, DNAPLs sink in aquifers instead of floating at the water table, making it extremely difficult to detect their presence. If left untreated in the ground, they can taint fresh water sources. Common DNAPLs include chlorinated hydrocarbon compounds such as carbon tetrachloride, chloroform, tetrachloroethylene, and trichloroethylene. Trichloroethylene was used during the early days of the Space Program, as a solvent for flushing rocket engines, and for metal cleaning and degreasing of equipment, electronics, and heavy machinery. As a result, areas of Cape Canaveral s Launch Complex 34, the site of several historic Saturn rocket launches occurring from 1959 to 1968, were polluted with chlorinated DNAPLs. Through the direction and guidance of Dr. Jacqueline Quinn, an environmental engineer in the Spaceport Engineering and Technology Directorate at NASA s Kennedy Space Center, a biodegradable environmental cleanup technology was developed to reductively dechlorinate DNAPL sources in polluted water at Launch Complex 34. It was important for Kennedy to nip this problem in the bud, in light of the fact that the Space Center is also a National Wildlife Refuge, home to thousands of shorebirds, endangered sea turtles and eagles, manatees, alligators, and diverse habitats that include brackish marshes and salt water estuaries. The success in remediating this historic launch site has led to numerous commercial applications that are restoring the health of our environmental surroundings.

Source record↗

Organic solvents, electrolytes, and lithium ion cells with good low temperature performance

Multi-component organic solvent systems, electrolytes and electrochemical cells characterized by good low temperature performance are provided. In one embodiment, an improved organic solvent system contains a ternary mixture of ethylene carbonate, dimethyl carbonate and diethyl carbonate. In other embodiments, quaternary systems include a fourth component, i.e, an aliphatic ester, an asymmetric alkyl carbonate or a compound of the formula LiOX, where X is R, COOR, or COR, where R is alkyl or fluoroalkyl. Electrolytes based on such organic solvent systems are also provided and contain therein a lithium salt of high ionic mobility, such as LiPF.sub.6. Reversible electrochemical cells, particularly lithium ion cells, are constructed with the improved electrolytes, and preferably include a carbonaceous anode, an insertion type cathode, and an electrolyte interspersed therebetween.

Smart, Marshall C.↗

Thermal Conductivity of Polyimide/Carbon Nanofiller Blends

In efforts to improve the thermal conductivity (TC) of Ultem(TM) 1000, it was compounded with three carbon based nano-fillers. Multiwalled carbon nanotubes (MWCNT), vapor grown carbon nanofibers (CNF) and expanded graphite (EG) were investigated. Ribbons were extruded to form samples in which the nano-fillers were aligned. Samples were also fabricated by compression molding in which the nano-fillers were randomly oriented. The thermal properties were evaluated by DSC and TGA, and the mechanical properties of the aligned samples were determined by tensile testing. The degree of dispersion and alignment of the nanoparticles were investigated with high-resolution scanning electron microscopy. The thermal conductivity of the samples was measured in both the direction of alignment as well as perpendicular to that direction using the Nanoflash technique. The results of this study will be presented.

Ghose, S.↗