Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARRIER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The critical role of hot carrier cooling in optically excited structural transitions

The hot carrier cooling occurs in most photoexcitation-induced phase transitions (PIPTs), but its role has often been neglected in many theoretical simulations as well as in proposed mechanisms. Here, by including the previously ignored hot carrier cooling in real-time time-dependent density functional theory (rt-TDDFT) simulations, we investigated the role of hot carrier cooling in PIPTs. Taking IrTe2 as an example, we reveal that the cooling of hot electrons from the higher energy levels of spatially extended states to the lower energy levels of the localized Ir–Ir dimer antibonding states strengthens remarkably the atomic driving forces and enhances atomic kinetic energy. These two factors combine to dissolute the Ir–Ir dimers on a timescale near the limit of atomic motions, thus initiating a deterministic kinetic phase transition. We further demonstrate that the subsequent cooling induces nonradiative recombination of photoexcited electrons and holes, leading to the ultrafast recovery of the Ir–Ir dimers observed experimentally. These findings provide a complete picture of the atomic dynamics in optically excited structural phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exciton polaron formation and hot-carrier relaxation in rigid Dion–Jacobson-type two-dimensional perovskites

The efficiency of two-dimensional Dion–Jacobson-type materials relies on the complex interplay between electronic and lattice dynamics; however, questions remain about the functional role of exciton–phonon interactions. Here we establish the robust polaronic nature of the excitons in these materials at room temperature by combining ultrafast spectroscopy and electronic structure calculations. We show that polaronic distortion is associated with low-frequency (30–60 cm –1 ) lead iodide octahedral lattice motions. More importantly, we discover how targeted ligand modification of this two-dimensional perovskite structure manipulates exciton–phonon coupling, exciton polaron population and carrier cooling. At high excitation density, stronger exciton–phonon coupling increases the hot-carrier lifetime, forming a hot-phonon bottleneck. Furthermore, our study provides detailed insight into the exciton–phonon coupling and its role in carrier cooling in two-dimensional perovskites relevant for developing emerging hybrid semiconductor materials with tailored properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Perovskite superlattices with efficient carrier dynamics

Compared with their three-dimensional (3D) counterparts, low-dimensional metal halide perovskites (2D and quasi-2D; B 2 A n-1 M n X 3n+1 , such as B = R-NH 3 + , A = HC(NH 2 ) 2 + , Cs + ; M = Pb 2+ , Sn 2+ ; X = Cl - , Br - , I - ) with periodic inorganic-organic structures have shown promising stability and hysteresis-free electrical performance. However, their unique multiple-quantum-well structure limits the device efficiencies because of the grain boundaries and randomly oriented quantum wells in polycrystals. In single crystals, the carrier transport through the thickness direction is hindered by the layered insulating organic spacers. Furthermore, the strong quantum confinement from the organic spacers limits the generation and transport of free carriers. Also, lead-free metal halide perovskites have been developed but their device performance is limited by their low crystallinity and structural instability 11 . Here, in this paper, we report a low-dimensional metal halide perovskite BA 2 MA n-1 Sn n I 3n+1 (BA, butylammonium; MA, methylammonium; n = 1, 3, 5) superlattice by chemical epitaxy. The inorganic slabs are aligned vertical to the substrate and interconnected in a criss-cross 2D network parallel to the substrate, leading to efficient carrier transport in three dimensions. A lattice-mismatched substrate compresses the organic spacers, which weakens the quantum confinement. The performance of a superlattice solar cell has been certified under the quasi-steady state, showing a stable 12.36% photoelectric conversion efficiency. Moreover, an intraband exciton relaxation process may have yielded an unusually high open-circuit voltage (V OC ).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Assessing rodents as carriers of pathogenic Leptospira species in the U.S. Virgin Islands and their risk to animal and public health

Leptospirosis is a global zoonotic disease caused by pathogenic bacteria of the genus Leptospira. We sought to determine if rodents in U.S. Virgin Islands (USVI) are carriers of Leptospira. In total, 140 rodents were sampled, including 112 Mus musculus and 28 Rattus rattus. A positive carrier status was identified for 64/140 (45.7%); 49 (35.0%) were positive by dark-field microscopy, 60 (42.9%) by culture, 63 (45.0%) by fluorescent antibody testing, and 61 (43.6%) by real-time polymerase chain reaction (rtPCR). Molecular typing indicated that 48 isolates were L. borgpetersenii and 3 were L. kirschneri; the remaining nine comprised mixed species. In the single culture-negative sample that was rtPCR positive, genotyping directly from the kidney identified L. interrogans. Serotyping of L. borgpetersenii isolates identified serogroup Ballum and L. kirschneri isolates as serogroup Icterohaemorrhagiae. These results demonstrate that rodents are significant Leptospira carriers and adds to understanding the ecoepidemiology of leptospirosis in USVI.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Reversible writing of high-mobility and high-carrier-density doping patterns in two-dimensional van der Waals heterostructures

A key feature of two-dimensional materials is that the sign and concentration of their carriers can be externally controlled with techniques such as electrostatic gating. However, conventional electrostatic gating has limitations, including a maximum carrier density set by the dielectric breakdown, and ionic liquid gating and direct chemical doping also suffer from drawbacks. In this work, we show that an electron-beam-induced doping technique can be used to reversibly write high-resolution doping patterns in hexagonal boron nitride-encapsulated graphene and molybdenum disulfide (MoS 2 ) van der Waals heterostructures. The doped MoS 2 device exhibits an order of magnitude decrease of subthreshold swing compared with the device before doping, whereas the doped graphene devices demonstrate a previously inaccessible regime of high carrier concentration and high mobility, even at room temperature. We also show that the approach can be used to write high-quality p–n junctions and nanoscale doping patterns, illustrating that the technique can create nanoscale circuitry in van der Waals heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced charge carrier extraction and transport with interface modification for efficient tin-based perovskite solar cells

Interface modification improves charge carrier extraction in tin-based perovskite solar cells. Tin-based perovskites have become the most promising non-lead perovskites due to their ideal band gap and low toxicity. Although the open circuit voltage of tin-based perovskite solar cells (TPSCs) continues to approach the theoretical value, the short-circuit current is still far from the theoretical value. Here, we describe an interface modification method by regulating the property of hole transport layer, PEDOT:PSS, which improves the surface molecular morphology and the energy level alignment of PEDOT:PSS/perovskite interface. Advanced GIWAXS and IR s-SNOM characterization are conducted to achieve multi-dimensional characterization of nanoscale surface morphology and chemical distribution of PEDOT:PSS. With the multi-attribute optimization, charge carrier extraction and non-radiative recombination are also improved. The resultant TPSCs exhibit a higher power conversion efficiency of 13.32% in compared with the control device of 10.50%, accompanied with an increase in the short-circuit current from 18.10 to 20.50 mA cm −2 and FF from 68.23% to 76.43%. This work demonstrates a reliable strategy for improving charge carrier extraction and device performance for lead-free TPSCs.

Zhao, Zhenzhu↗
DOE OSTI2020

Minority carrier lifetime and photoluminescence of mid-wave infrared InAsSbBi

Time-resolved photoluminescence measurements are reported for InAsSbBi alloys grown by molecular beam epitaxy with Bi mole fractions ranging from 0 to 0.8%, yielding minority carrier lifetimes on the order of hundreds of nanoseconds. The minority carrier lifetimes extracted from the time-resolved photoluminescence measurements are comparable to those of lattice-matched InAsSb grown at the same respective temperatures. Nomarski imaging shows that smooth, droplet-free surface morphologies are obtained in 1 μm thick InAsSbBi epilayers grown at temperatures between 360 and 380 °C. The alloy composition-dependent bandgap energies for the InAsSbBi samples are determined from temperature-dependent steady-state photoluminescence measurements and compared with the tetragonal distortion measured by x-ray diffraction to determine the Sb and Bi mole fractions of each sample. The minority carrier lifetime and the achievable extension of the InAsSb(Bi) cut-off wavelength are analyzed as functions of alloy composition and compared with the performance of InAsSb layers with similar growth parameters.

Petluru, Priyanka (ORCID:0000000257154284)↗
DOE OSTI2020

Variations of light emission and carrier dynamics around V-defects in InGaN quantum wells

Time- and spectrally-resolved scanning near-field optical microscopy was applied to study spatial variations of photoluminescence (PL) spectra and carrier dynamics in polar InGaN/GaN single quantum wells (QWs) emitting from 410 nm to 570 nm. The main attention was devoted to variations of PL properties and carrier dynamics around V-defects. The PL intensity, peak wavelength, and linewidth, as well as the radiative and nonradiative recombination times, were found to be different in V-defect-rich and defect-free regions. The radiative lifetime close to the defects was longer up to several times, which is attributed to an increased electron and hole wave function separation in the QW plane. PL decay times, measured using excitation and collection through the near-field probe, were one to two orders of magnitude shorter than PL decay times measured in the far field. This shows that the near-field PL decay and the integrated PL intensity are primarily determined by the carrier out-diffusion from under the probe. Only in the immediate vicinity of the V-defects, the near-field PL decays due to the nonradiative recombination at dislocations. The area of such enhanced nonradiative recombination is limited to just a few percent of the total QW area. This shows that recombination via dislocations and V-defects does not play a decisive role in the overall nonradiative recombination and internal quantum efficiency of polar InGaN/GaN QWs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unveiling the ambipolar carrier transport property of SnO 2–X for multiple-functional interlayers in perovskite solar cells

Tin oxides are the most promising electron transport layers in perovskite solar cells. An ambipolar carrier transport property has been recently demonstrated which enables a simple interconnection structure for all-perovskite tandem solar cells. However, the underlying mechanism for its ambipolar behavior is unclear which cannot be explained by the intrinsic defects in SnO 2-x . Here by using density functional theory calculations, we unveil the origin of the ambipolar carrier transport of non-stoichiometry SnO 2-x with a structure of SnO embedded in SnO 2 matrix. The hybridization of O 2p and Sn 5s orbitals of SnO introduces mid-gap states in the bandgap of SnO 2 , enabling hole transport property for SnO 2-x when x is > 0.2. Increasing the percentage of SnO in SnO 2-x significantly enhances the hole transport capability of SnO 2-x due to the enlarged Sn-O-Sn angles that increases orbital overlapping between O and Sn atoms, thus providing strategies for the further tuning of the carrier transport properties of SnO 2-x by compositional and structural designs.

14 SOLAR ENERGY↗
DOE OSTI2022

Role of morphology in defect formation and photo-induced carrier instabilities in amorphous indium oxide

Ab initio molecular dynamics liquid-quench simulations and hybrid density functional calculations are performed to model the effects of room-temperature atomic fluctuations and photo-illumination on the structural and electronic properties of amorphous sub-stoichiometric In 2 O 2.96 . A large configurational ensemble is employed to reliably predict the distribution of localized defects as well as their response to the thermal and light activation. The results reveal that the illumination effects on the carrier concentration are greater in amorphous configurations with shorter In–O bond length and reduced polyhedral sharing as compared to the structures with a more uniform morphology. Further, the obtained correlation between the photo-induced carrier density and the reduction in the number of fully coordinated In-atoms implies that metal oxides with a significant fraction of crystalline/amorphous interfaces would show a more pronounced response to illumination. Photo-excitation also produces In–O 2 –In defects that have not been previously found in sub-stoichiometric amorphous oxides; these defects are responsible for carrier instabilities due to overdoping.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Probing itinerant carrier dynamics at the diamond surface using single nitrogen vacancy centers

Color centers in diamond are widely explored for applications in quantum sensing, computing, and networking. Their optical, spin, and charge properties have extensively been studied, while their interactions with itinerant carriers are relatively unexplored. Here, we show that NV centers situated 10 ± 5 nm of the diamond surface can be converted to the neutral charge state via hole capture. By measuring the hole capture rate, we extract the capture cross section, which is suppressed by proximity to the diamond surface. The distance dependence is consistent with a carrier diffusion model, indicating that the itinerant carrier lifetime can be long, even at the diamond surface. Measuring dynamics of near-surface NV centers offers a tool for characterizing the diamond surface and investigating charge transport in diamond devices.

Physics↗
DOE OSTI2023

Utility of Shockley–Read–Hall analysis to extract defect properties from semiconductor minority carrier lifetime data

The semiconductor minority carrier lifetime contains information about several important material properties, including Shockley–Read–Hall defect levels/concentrations and radiative/Auger recombination rates, and the complex relationships between these parameters produce a non-trivial temperature-dependence of the measured lifetime. It is tempting to fit temperature-dependent lifetime data to extract the properties of the Shockley–Read–Hall recombination centers; however, without a priori knowledge of the distribution of the Shockley–Read–Hall states across the bandgap, this fit problem is under-constrained in most circumstances. Shockley–Read–Hall lifetime data are not well-suited for the extraction of Shockley–Read–Hall defect levels but can be used effectively to extract minority carrier recombination lifetimes. The minority carrier recombination lifetime is observed at temperatures below 100 K in a Si-doped n-type InGaAs/InAsSb superlattice, and deviation from its expected temperature-dependence indicates that the capture cross section of the defect associated with Si-doping has an activation energy of 1.5 meV or a characteristic temperature of 17 K. This lower temperature regime is also preferrable for the analysis of the physics of defect introduction with displacement-damage-generating particle irradiation.

Physics↗
DOE OSTI2023

Effect of Mg doping on carrier recombination in GaN

Time-resolved photoluminescence measurements have been performed on Mg-doped GaN for Mg concentrations in the low- to mid-10 19 cm -3 . As-grown and annealed (600–675 °C) samples were studied. In the as-grown samples, the nonradiative carrier lifetime was found to be about 200 ps and nearly independent of the Mg concentration. Upon annealing, the carrier lifetimes shorten to ~150 ps but, again, show little dependence on the annealing temperature. The analysis of possible Shockley–Read–Hall recombination centers and their behavior during doping and annealing suggests that the main nonradiative recombination center is the Mg–nitrogen vacancy complex. The weak dependence of the PL decay times on temperature indicates that carrier capture into this center has a very low potential barrier, and the nonradiative recombination dominates even at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamics of carrier injection through V-defects in long wavelength GaN LEDs

The efficiency of high-power operation of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on the realization of uniform hole distribution between the QWs. In long wavelength InGaN/GaN QW LEDs, the thermionic interwell hole transport is hindered by high GaN barriers. However, in polar LED structures, these barriers may be circumvented by the lateral hole injection via semipolar {$10\bar{1}1$} QWs that form on the facets of V-defects. The efficiency of such carrier transfer depends on the transport time since transport in the semipolar QWs is competed by recombination. In this work, we study the carrier transfer from the semipolar to polar QWs by time-resolved photoluminescence in long wavelength (green to red) LEDs. We find that the carrier transfer through the semipolar QWs is fast, a few tens of picoseconds with the estimated room temperature ambipolar diffusion coefficient of ∼5.5 cm 2 /s. With diffusion much faster than recombination, the hole transport from the p-side of the structure to the polar QWs should proceed without a substantial loss, contributing to the high efficiency of long wavelength GaN LEDs.

Crystallographic defects↗
DOE OSTI2024

Carrier diffusion in long wavelength InGaN quantum well LEDs after injection through V-defects

The efficiency of operation of GaN-based light emitting diodes (LEDs) to a large degree relies on realization of a uniform hole distribution between multiple quantum wells (QWs) of the active region. Since the direct thermionic transport between the QWs is inefficient, the hole injection through semipolar {$10\bar{1}1$} QWs that form on the facets of V-defects has been suggested as an alternative approach. However, for an efficient LED operation, the carrier distribution should be uniform not only vertically, between the QWs but also laterally, within individual QWs. In this work, the lateral carrier distribution in long wavelength InGaN/GaN QW LEDs is studied by the scanning near-field optical microscopy. The measurements have shown that emission is concentrated around the V-defect injectors. At high currents, the diffusion length of holes in polar QWs was found to be ∼0.6–1 μm and the hole diffusion coefficient ∼0.6 cm 2 /s. The obtained data should aid design of the V-defect injectors for a laterally uniform carrier distribution in the active region QWs.

Current crowding↗
DOE OSTI2025

Field-dependent carrier transport in implanted isolation region of GaN lateral power devices

Among GaN lateral power devices, with proper E-field management, the breakdown occurs in the device isolation region rather than the active region. In this paper, we investigate field-dependent carrier transport in the isolation structures. Isolation test structures with variations in buffer doping, un-intentionally doped (UID) GaN thickness, and implantation conditions were fabricated. Electrical characterization was performed over a wide range of voltage and temperature. With varying UID GaN thickness and buffer doping, the leakage current and breakdown characteristics remain the same for a specific implantation condition, indicating that the leakage conduction and breakdown are governed by the implanted GaN region. Analysis of the temperature-dependent I–V reveals that carrier transport in the implanted GaN can be well explained by hopping conduction, involving three distinctive regions of operation depending on the E-field. At low E-field, carrier transport is ohmic, consistent with variable range hopping, driven by thermal activation. At medium E-field, a field enhanced thermally activated hopping is observed, following σ ∼ σ(T)exp(E). At high E-field, activation-less hopping is visible, following σ ∼ exp(−1/E), which occurs above a critical E-field limited by localization length.

Sadek, Mansura (ORCID:0000000322588338)↗
DOE OSTI2020

Plastocyanin is the long-range electron carrier between photosystem II and photosystem I in plants

In photosynthetic electron transport, large multiprotein complexes are connected by small diffusible electron carriers, the mobility of which is challenged by macromolecular crowding. For thylakoid membranes of higher plants, a long-standing question has been which of the two mobile electron carriers, plastoquinone or plastocyanin, mediates electron transport from stacked grana thylakoids where photosystem II (PSII) is localized to distant unstacked regions of the thylakoids that harbor PSI. Here, we confirm that plastocyanin is the long-range electron carrier by employing mutants with different grana diameters. Furthermore, our results explain why higher plants have a narrow range of grana diameters since a larger diffusion distance for plastocyanin would jeopardize the efficiency of electron transport. In the light of recent findings that the lumen of thylakoids, which forms the diffusion space of plastocyanin, undergoes dynamic swelling/shrinkage, this study demonstrates that plastocyanin diffusion is a crucial regulatory element of plant photosynthetic electron transport.

plastoquinone↗
DOE OSTI2020

Phonon linewidths in InAs/AlSb superlattices derived from first-principles—application towards quantum well hot carrier solar cells

Hot electrons generated by the absorption of high-energy photons typically thermalize by dissipating energy through phonon mediated relaxation pathways. Existence of non-equilibrium optical phonon populations (hot phonons) can suppress thermalization of electrons by facilitating a stable hot carrier population. In this work, we derive optical phonon scattering rates in InAs/AlSb superlattices using first-principles calculations and compare them with bulk InAs. Computations are performed for the two shortest period superlattices with equal widths of InAs and AlSb. While in pure InAs, the highest optical phonon scattering rates reach 5 cm -1 ; in the superlattice, the peak scattering rates of optical phonons with frequencies above the energy gap, are much smaller, reaching ~1 cm -1 . Finally, these lower scattering rates in the superlattice have important implications for design of high efficiency hot carrier solar cells and explain some of the robust hot carriers observed recently in InAs/AlAsSb quantum wells.

14 SOLAR ENERGY↗