Search NASA⌕ Search

SEARCH · Search NASA

Results for “CUTTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Sinuous Flow in Cutting of Metals

Using in situ high-speed imaging, we unveil details of a highly unsteady plastic flow mode in the cutting of annealed and highly strain-hardening metals. This mesoscopic flow mode, termed sinuous flow, is characterized by repeated material folding, large rotation, and energy dissipation. Sinuous flow effects a very large shape transformation, with local strains of ten or more, and results in a characteristic mushroomlike surface morphology that is quite distinct from the well-known morphologies of metal-cutting chips. Importantly, the attributes of this unsteady flow are also fundamentally different from other well-established unsteady plastic flows in large-strain deformation, like adiabatic shear bands. The nucleation and development of sinuous flow, its dependence on material properties, and its manifestation across material systems are demonstrated. Plastic buckling and grain-scale heterogeneity are found to play key roles in triggering this flow at surfaces. Implications for modeling and understanding flow stability in large-strain plastic deformation, surface quality, and preparation of near-strain-free surfaces by cutting are discussed. Finally, the results point to the inadequacy of the widely used shear-zone models, even for ductile metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The best of both worlds: automated CMP polishing of channel-cut monochromators

The use of a channel-cut monochromator is the most straightforward method to ensure that the two reflection surfaces maintain alignment between crystallographic planes without the need for complicated alignment mechanisms. Three basic characteristics that affect monochromator performance are: subsurface damage which contaminates spectral purity; surface roughness which reduces efficiency due to scattering; and surface figure error which imparts intensity structure and coherence distortion in the beam. Standard chemical-mechanical polishing processes and equipment are used when the diffracting surface is easily accessible, such as for single-bounce monochromators. Due to the inaccessibly of the surfaces inside a channel-cut monochromator for polishing, these optics are generally wet-etched for their final processing. This results in minimal subsurface damage, but very poor roughness and figure error. A new CMP channel polishing instrument design is presented which allows the internal diffracting surface quality of channel-cut crystals to approach that of conventional single-bounce monochromators

channel-cut↗

Quantum Circuit Cutting for Classical Shadows

Classical shadow tomography is a sample-efficient technique for characterizing quantum systems and predicting many of their properties. Circuit cutting is a technique for dividing large quantum circuits into smaller fragments that can be executed more robustly using fewer quantum resources. We introduce a divide-and-conquer circuit cutting method for estimating the expectation values of observables using classical shadows. We derive a general formula for making predictions using the classical shadows of circuit fragments from arbitrarily cut circuits and provide the sample complexity analysis for the case when observables factorize across fragments. Then, we numerically show that our divide-and-conquer method outperforms traditional uncut shadow tomography when estimating high-weight observables that act non-trivially on many qubits and discuss the mechanisms for this advantage.

97 MATHEMATICS AND COMPUTING↗

The Ramping Polytope and Cut Generation for the Unit Commitment Problem

We present a perfect formulation for a single generator in the unit commitment problem, inspired by the dynamic programming approach taken by Frangioni and Gentile. This generator can have characteristics such as ramp-up/ramp-down constraints, time-dependent start-up costs, and start-up/shut-down limits. To develop this perfect formulation, we extend the result of Balas on unions of polyhedra to present a framework allowing for flexible combinations of polyhedra using indicator variables. Here, we use this perfect formulation to create a cut-generating linear program, similar in spirit to lift-and-project cuts, and demonstrate computational efficacy of these cuts in a utility-scale unit commitment problem.

97 MATHEMATICS AND COMPUTING↗

Flake Formation in Phase Layers of a Cutting Ceramic

Flake formation (cracking) is observed in inserts of untreated cutting ceramic and also during diffusional strengthening of the inserts’ surface layer by nitrogen on heating in a muffle furnace to 450–500°C, with the creation of γ-phase (a protective layer), the removal of carbon from the atomic cells, and the formation of titanium nitride. Heat-treatment conditions for inserts of cutting ceramic are established such that the flake content at their surface is reduced. Treatment to prevent flake formation is proposed: heating in a sealed muffle furnace with a nitrogen atmosphere to 250–280°C at a pressure of 0.25 MPa. In this process, the titanium carbide at the surface of the inserts is converted to titanium nitride as a result of carbon diffusion, with the formation of a protective γ-phase layer. By removing carbon from the surface layer of the inserts and ensuring the diffusion of nitrogen into the cutting ceramic, with the formation of titanium nitride in the γphase, the durability and performance of the inserts are improved, along with their mechanical properties.

36 MATERIALS SCIENCE↗

Ultrasonic Cutting of Polymers

The use of ultrasound in cutting plastics, synthetic fabrics, and polymer films is considered. A practical configuration is outlined, and the benefits of ultrasound in cutting are presented. The influence of the parameters in ultrasonic cutting on the productivity and the quality of the machined polymer is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cutting Methods for Thick Titanium-Alloy Slabs

Methods of cutting thick titanium-alloy plates and slabs are considered. The surface quality of the cut and the productivity are estimated. Abrasive cutting by means of water jets is the most universal method and yields satisfactory surface quality at moderate cost.

42 ENGINEERING↗

Degradation of Dome Cutting Minerals in Hanford Waste - 13100

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg. C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

STRUCTURAL ANNOTATION OF EM IMAGES BY GRAPH CUT

Biological images have the potential to reveal complex signatures that may not be amenable to morphological modeling in terms of shape, location, texture, and color. An effective analytical method is to characterize the composition of a specimen based on user-defined patterns of texture and contrast formation. However, such a simple requirement demands an improved model for stability and robustness. Here, an interactive computational model is introduced for learning patterns of interest by example. The learned patterns bound an active contour model in which the traditional gradient descent optimization is replaced by the more efficient optimization of the graph cut methods. First, the energy function is defined according to the curve evolution. Next, a graph is constructed with weighted edges on the energy function and is optimized with the graph cut algorithm. As a result, the method combines the advantages of the level set method and graph cut algorithm, i.e.,"topological" invariance and computational efficiency. The technique is extended to the multi-phase segmentation problem; the method is validated on synthetic images and then applied to specimens imaged by transmission electron microscopy(TEM).

60 APPLIED LIFE SCIENCES↗

Impact of drilling fluid rheology and wellbore pressure on rock cuttings removal performance: numerical investigation

Drilling fluids exhibit non-Newtonian behavior which is generally described in the literature by two rheological models: Power Law and Herschel-Bulkley models. We have used Eulerian- Eulerian multiphase flow model to evaluate the drilling fluid flow patterns and filter cake formation patterns for both models for ultra-deep drilling conditions. Simulated drilling fluid flow patterns clearly show that the Herschel - Bulkley model exhibits fewer vortices around the drilling pipe, indicating better rock cuttings removal performance. In addition to mud rheology, we have analyzed the pressure drop variation with the filter cake formation on the wellbore during ultradeep drilling process. We have shown that filter cake thickness at the wall linearly increases with differential pressure between the well and formation. This implies that the differential pressure needs to be optimized. Very thin filter cake may lead to excessive fluid seepage into the permeable subterranean vertical zone resulting in a loss of fluid circulation and hence in a loss of rock cuttings removal. Yet, very thick filter cake reduces the effective diameter of the hole which may lead to a poor rock cuttings removal performance and stuck pipe. The mathematical model presented here needs to be experimentally validated when filter cake thickness data in deep drilling conditions become available. The model could be useful to provide drilling engineers insight on the filter cake formation, drilling fluid flow pattern, and give guide-line to optimize the filter cake as field experimental data are scarce.

02 PETROLEUM↗

Special Features of the Structure of Titanium Nitride Coatings in Substrate Surface Cuts

Elemental compositions and structure-phase states of titanium nitride coatings on the flat surface and in a cut of substrate from 10Cr18Ni10Ti steel are investigated by the methods of x-ray microspectral analysis, Auger electron spectroscopy, and dark-field electron microscopy analysis of the bending-torsion of the crystal lattice. It is established that the coating in the cut, unlike the coating on the frontal surface, has a modified elemental composition and a two-layer structure whose special features and thicknesses change with distance from the sample surface. It is shown that these changes are caused by phase transformations, decreased number of defects, dispersion of layer structures, and increased concentration of impurities with increasing distance from the substrate surface. Based on the results obtained, possible conditions for coating structure formation in the cut of the substrate surface are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A cut-cell finite volume – finite element coupling approach for fluid–structure interaction in compressible flow

We present a loosely coupled approach for the solution of fluid–structure interaction problems between a compressible flow and a deformable structure. The method is based on staggered Dirichlet–Neumann partitioning. The interface motion in the Eulerian frame is accounted for by a conservative cut-cell Immersed Boundary method. The present approach enables sub-cell resolution by considering individual cut-elements within a single fluid cell, which guarantees an accurate representation of the time-varying solid interface. The cut-cell procedure inevitably leads to non-matching interfaces, demanding for a special treatment. A Mortar method is chosen in order to obtain a conservative and consistent load transfer. We validate our method by investigating two-dimensional test cases comprising a shock-loaded rigid cylinder and a deformable panel. Moreover, the aeroelastic instability of a thin plate structure is studied with a focus on the prediction of flutter onset. Finally, we propose a three-dimensional fluid–structure interaction test case of a flexible inflated thin shell interacting with a shock wave involving large and complex structural deformations.

42 ENGINEERING↗

A Cartesian cut cell method for rarefied flow simulations around moving obstacles

For accurate simulations of rarefied gas flows around moving obstacles, we propose a cut cell method on Cartesian grids: it allows exact conservation and accurate treatment of boundary conditions. Our approach is designed to treat Cartesian cells and various kinds of cut cells by the same algorithm, with no need to identify the specific shape of each cut cell. This makes the implementation quite simple, and allows a direct extension to 3D problems. Such simulations are also made possible by using an adaptive mesh refinement technique and a hybrid parallel implementation. This is illustrated by several test cases, including a 3D unsteady simulation of the Crookes radiometer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Joining aluminum to titanium alloy by friction stir lap welding with cutting pin

Aluminum 1060 and titanium alloy Ti-6Al-4V plates were lap joined by friction stir welding. A cutting pin of rotary burr made of tungsten carbide was employed. The microstructures of the joining interface were observed by scanning electron microscopy. Joint strength was evaluated by a tensile shear test. During the welding process, the surface layer of the titanium plate was cut off by the pin, and intensively mixed with aluminum situated on the titanium plate. The microstructures analysis showed that a visible swirl-like mixed region existed at the interface. In this region, the Al metal, Ti metal and the mixed layer of them were all presented. The ultimate tensile shear strength of joint reached 100% of 1060Al that underwent thermal cycle provided by the shoulder. - Highlights: Black-Right-Pointing-Pointer FSW with cutting pin was successfully employed to form Al/Ti lap joint. Black-Right-Pointing-Pointer Swirl-like structures formed due to mechanical mixing were found at the interface. Black-Right-Pointing-Pointer High-strength joints fractured at Al suffered thermal cycle were produced.

36 MATERIALS SCIENCE↗

Leaf-cutting ant (Atta cephalotes) nests may be hotspots of methane and carbon dioxide emissions in tropical forests

Leaf-cutting ants of the genus Atta are widely distributed throughout the American tropics and subtropics and rival other herbivores in the consumption of surrounding foliage. Although numerous studies have been conducted on the role these insects play in herbivory and organic matter dynamics, only a handful of studies have examined their impacts on soil greenhouse gas emissions. Our study investigated fluxes of carbon dioxide (CO 2 ) and methane (CH 4 ) from three nests of Atta cephalotes using a portable greenhouse gas analyzer, and measured CO 2 and CH 4 emissions from soils containing nest holes that ranged 5.2–152.1 g CO 2 -C and –1.1 to 15,264.7 mg CH 4 -C m -2 day -1 , respectively. Fluxes of CO 2 and CH 4 were positively correlated above nest holes, but not in patches of soil away from leaf-cutting ant nests. Nearby non-nest soil emissions were significantly lower, ranging from 0.6 to 6.0 g CO 2 -C and –1.3 to 0.77 mg CH 4 -C m -2 day -1 . Fluxes of both gases among nests and among holes within a single nest were highly variable. This preliminary dataset is small in scale both temporarily and geographically, but the discovery of substantial greenhouse gas fluxes from Atta cephalotes nests may have important implications for carbon budgets of tropical and subtropical American forests. Further work will be necessary to determine the mechanisms behind enhanced greenhouse gas emissions from leaf-cutting ant nests, and how this may alter ecosystem-scale CO 2 emissions and CH 4 sink strength in tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗

Quick-scanning x-ray absorption spectroscopy system with a servo-motor-driven channel-cut monochromator with a temporal resolution of 10 ms

We have developed a quick-scanning x-ray absorption fine structure (QXAFS) system and installed it at the recently constructed synchrotron radiation beamline BL33XU at the SPring-8. Rapid acquisition of high-quality QXAFS data was realized by combining a servo-motor-driven Si channel-cut monochromator with a tapered undulator. Two tandemly aligned monochromators with channel-cut Si(111) and Si(220) crystals covered energy ranges of 4.0-28.2 keV and 6.6-46.0 keV, respectively. The system allows the users to adjust instantly the energy ranges of scans, the starting angles of oscillations, and the frequencies. The channel-cut crystals are cooled with liquid nitrogen to enable them to withstand the high heat load from the undulator radiation. Deformation of the reflecting planes is reduced by clamping each crystal with two cooling blocks. Performance tests at the Cu K-edge demonstrated sufficiently high data quality for x-ray absorption near-edge structure and extended x-ray absorption fine-structure analyses with temporal resolutions of up to 10 and 25 ms, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Three-photon near-infrared quantum cutting in Tm{sup 3+}-doped transparent oxyfluoride glass ceramics

Efficient three-step sequential three-photon near-infrared (NIR) quantum cutting in Tm{sup 3+}-doped transparent oxyfluoride glass ceramics has been demonstrated, where an absorbed blue photon could be cut into three NIR photons at 1190, 1460, and 1800 nm with quantum yield greater than unity. On the basis of static and dynamic photoemission, monitored excitation, and time-resolved fluorescence spectra, we investigate in detail the underlying optoelectronic mechanism. Further development of an efficient triply-cutting material might open up a path towards ultra-efficient photonic devices, which enables more photons emitted than absorbed in the excitation process.

36 MATERIALS SCIENCE↗