Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cluster Expansion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Space shuttle booster multi-engine base flow analysis

A comprehensive review of currently available techniques pertinent to several prominent aspects of the base thermal problem of the space shuttle booster is given along with a brief review of experimental results. A tractable engineering analysis, capable of predicting the power-on base pressure, base heating, and other base thermal environmental conditions, such as base gas temperature, is presented and used for an analysis of various space shuttle booster configurations. The analysis consists of a rational combination of theoretical treatments of the prominent flow interaction phenomena in the base region. These theories consider jet mixing, plume flow, axisymmetric flow effects, base injection, recirculating flow dynamics, and various modes of heat transfer. Such effects as initial boundary layer expansion at the nozzle lip, reattachment, recompression, choked vent flow, and nonisoenergetic mixing processes are included in the analysis. A unified method was developed and programmed to numerically obtain compatible solutions for the various flow field components in both flight and ground test conditions. Preliminary prediction for a 12-engine space shuttle booster base thermal environment was obtained for a typical trajectory history. Theoretical predictions were also obtained for some clustered-engine experimental conditions. Results indicate good agreement between the data and theoretical predicitons.

Tang, H. H.↗

Chromospheres and mass loss in metal-deficient giant stars

Semiempirical atmospheric models indicate that the characteristic emission in the wings of the H-alpha line observed in Population II giant stars can arise naturally within static chromospheres. Radial expansion gives an asymmetric, blueshifted H-alpha core accompanied by greater emission in the red line wing than in the blue wing. Wind models with extended atmospheres suggest mass loss rates much smaller than 2 x 10 to the -9th solar mass per yr. Thus H-alpha provides no evidence that steady mass loss can significantly affect the evolution of stars on the red giant branch of globular clusters.

Dupree, A. K.↗

The infall velocity toward Virgo, the Hubble constant, and a search for motion toward the microwave background

The perturbation of the local velocity field due to the overdensity of the Virgo complex (VC) is investigated theoretically, using an idealized spherically symmetric Virgocentric flow model and testing for a correlation between cos theta (where theta is the angle from the VC direction to eight groups and clusters with velocity 800-2500 km/s) and the relevant velocity residuals. The data and results are presented in extensive tables, graphs, and a map in extragalactic coordinates. The infall of the Local Group (LG) toward the VC is estimated as 200 + or - 50 km/s, corresponding to a mean mass/light ratio M/L(B) = about 70 for a sphere centered at the VC core and extending to the LG. The rate of free expansion within the VC is estimated as 52 + or 2 km/s Mpc for a VC distance of 21.6 Mpc. It is pointed out that the LG infall toward the VC cannot account for observations of an apparent 630-km/s motion of the LG toward the microwave background.

Tammann, G. A.↗

A Probabilistic Model for Global EMIC Wave Activity Using Van Allen Probes Observations

Electromagnetic ion cyclotron (EMIC) waves play a key role in radiation belt dynamics through resonant interactions. However, their low occurrence probability, high variability, and spatial intermittency pose challenges for accurate modeling. In this study, we present a machine learning (ML)-based global EMIC wave model built on the entire data set from the Van Allen Probes mission. To capture the distinct statistical characteristics of wave occurrence and amplitude, the model is separated into two modules: an occurrence model trained using ML techniques, and a wave amplitude model sampled from observed probability distributions. The input parameters are limited to real-time or predictable variables to ensure practical applicability. Our model shows strong performance across the entire test set and demonstrates improved predictive capability over a baseline random occurrence model, particularly during quiet geomagnetic conditions. Evaluation during both quiet and active periods confirms the model's ability to represent the clustered and intermittent nature of EMIC wave activity. Furthermore, the model provides global estimates of wave power, enabling integration with radiation belt electron data and showing signatures consistent with wave-induced scattering. We found a good correlation between the global wave activity from the model and relativistic electron observation by Van Allen Probes, regardless of the availability of in situ wave observations. The modular structure of the model also allows for straightforward expansion for additional wave properties, such as wave frequency, which can be modeled independently. This flexible, event-sensitive approach offers a promising framework for data-driven radiation belt simulations and space weather applications.

79 ASTRONOMY AND ASTROPHYSICS↗

Torsional Flexibility Tuning of Hexa-Carboxylate Ligands to Unlock Distinct Topological Access to Zirconium Metal–Organic Frameworks

Zirconium-based metal–organic frameworks (Zr-MOFs) exhibit remarkable structural diversity and functionality. However, uncovering new topological types within this family remains a considerable challenge today. Herein, we report two new hexa-topic ligands designed through the introduction of torsional flexibility, which enable the construction of two Zr-MOFs featuring rare network topologies. The (4,4′,4″,4‴,4‴′,4‴′′-((2-carboxybenzene-1,3,5-triyl)tris(9H-carbazole-9,3,6-triyl))hexabenzoic acid ligand (BTCH)) was obtained by replacing the rigid triptycene core in the H6PET-1 ligand (4,4′,4″,4‴,4‴′,4‴′′-(9,10-dihydro-9,10-[1,2]benzenoanthracene-2,3,6,7,14,15-hexayl)hexabenzoic acid) with a benzene-tricarbazole unit. Owing to its torsionally flexible core that allows rotational freedom to the arms, this ligand directs the construction of NU-2620 (NU represents Northwestern University), a Zr-MOF with 8-connected Zr6 clusters and the rare nuh topology. Further flexibilization of the carbazole units to benzene rings yielded the even more torsionally flexible 5′,5‴-bis(4-carboxyphenyl)-5″-(4,4″-dicarboxy-[1,1′:3′,1″-terphenyl]-5′-yl)-[1,1′:3′,1″:3″,1‴:3‴,1‴′-quinquephenyl]-4,4‴′-dicarboxylic acid ligand (CCTT), which forms NU-2630 featuring 6-connected clusters and the pcu topology. Both frameworks exhibit good chemical stability, prompting evaluation of their performance in CO2 photoreduction catalysis. Under low-concentration CO2 conditions, NU-2620 displays markedly higher catalytic activity than its benzene-based analogue, NU-2630, thanks to the abundance of photoactive carbazole units within its structure. These results demonstrate that introducing torsional flexibility in high-connected linkers can unlock access to new topologies and accelerates the reticular expansion of Zr-MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A unified N-body and statistical treatment of stellar dynamics. I - The hybrid code. II - Applications to globular cluster cores

A unified N-body and statistical treatment of stellar dynamics is developed and applied to the late stages of core collapse and early stages of post collapse evolution in globular clusters. A 'hybrid' computer code is joined to a direct N-body code which is used to calculate exactly the behavior of particles in the inner spatial region, and the combination is used to follow particles statistically in the outer spatial region. A transition zone allows the exchange of particles and energy between the two regions. The main application results include: formation of a hard central binary system, reversal of core collapse and expansion due to the heat input from this binary, ejection of the binary from the core, and recollapse of the core; density profiles that form a one-parameter sequence during the core oscillations; and indications that these oscillations will eventually cease.

Mcmillan, S. L. W.↗

Section-level genome sequencing and comparative genomics of Aspergillus sections Cavernicolus and Usti.

The genus Aspergillus is diverse, including species of industrial importance, human pathogens, plant pests, and model organisms. Aspergillus includes species from sections Usti and Cavernicolus, which until recently were joined in section Usti, but have now been proposed to be non-monophyletic and were split by section Nidulantes, Aenei and Raperi. To learn more about these sections, we have sequenced the genomes of 13 Aspergillus species from section Cavernicolus (A. cavernicola, A. californicus, and A. egyptiacus), section Usti (A. carlsbadensis, A. germanicus, A. granulosus, A. heterothallicus, A. insuetus, A. keveii, A. lucknowensis, A. pseudodeflectus and A. pseudoustus), and section Nidulantes (A. quadrilineatus, previously A. tetrazonus). We compared these genomes with 16 additional species from Aspergillus to explore their genetic diversity, based on their genome content, repeat-induced point mutations (RIPs), transposable elements, carbohydrate-active enzyme (CAZyme) profile, growth on plant polysaccharides, and secondary metabolite gene clusters (SMGCs). All analyses support the split of section Usti and provide additional insights: Analyses of genes found only in single species show that these constitute genes which appear to be involved in adaptation to new carbon sources, regulation to fit new niches, and bioactive compounds for competitive advantages, suggesting that these support species differentiation in Aspergillus species. Sections Usti and Cavernicolus have mainly unique SMGCs. Section Usti contains very large and information-rich genomes, an expansion partially driven by CAZymes, as section Usti contains the most CAZyme-rich species seen in genus Aspergillus. Section Usti is clearly an underutilized source of plant biomass degraders and shows great potential as industrial enzyme producers. Citation: Nybo JL, Vesth TC, Theobald S, Frisvad JC, Larsen TO, Kjaerboelling I, Rothschild-Mancinelli K, Lyhne EK, Barry K, Clum A, Yoshinaga Y, Ledsgaard L, Daum C, Lipzen A, Kuo A, Riley R, Mondo S, LaButti K, Haridas S, Pangalinan J, Salamov AA, Simmons BA, Magnuson JK, Chen J, Drula E, Henrissat B, Wiebenga A, Lubbers RJM, Müller A, dos Santos Gomes AC, Mäkelä MR, Stajich JE, Grigoriev IV, Mortensen UH, de Vries RP, Baker SE, Andersen MR (2025). Section-level genome sequencing and comparative genomics of Aspergillus sections Cavernicolus and Usti. Studies in Mycology 111: 101-114. doi: 10.3114/sim.2025.111.03.

59 BASIC BIOLOGICAL SCIENCES↗

Shock tube and shock wave research; Proceedings of the Eleventh International Symposium, University of Washington, Seattle, Wash., July 11-14, 1977

Papers are presented on the applications of shock-wave technology to the study of hydrodynamics, the use of the pressure-wave machine for charging diesel engines, and measurements of the heat-transfer rate in gas-turbine components. Consideration is given to shock propagation along 90-degree bends, the explosive dissemination of liquids, and rotational and vibrational relaxation behind weak shock waves in water vapor. Shock phenomena associated with expansion flows are described and stratospheric-related research using the shock tube is outlined. Attention is given to shock-wave ignition of magnesium powders, Mach reflection and boundary layers, and transition in the shock-induced unsteady boundary layer on a flat plate. Shock-tube measurements of induction and post-induction rates for low-Btu gas mixtures are presented and shock-initiated ignition in COS-N2O-Ar mixtures is described. Cluster growth rates in supersaturated lead vapor are presented and a study of laser-induced plasma motion in a solenoidal magnetic field is reviewed.

Ahlborn, B.↗

Numerical Simulations of High Enthalpy Pulse Facilities

Axisymmetric flows within shock tubes and expansion tubes are simulated including the effects of finite rate chemistry and both laminar and turbulent boundary layers. The simulations demonstrate the usefulness of computational fluid dynamics for characterizing the flows in high enthalpy pulse facilities. The modeling and numerical requirements necessary to simulate these flows accurately are also discussed. Although there is a large body of analysis which explains and quantifies the boundary layer growth between the shock and the interface in a shock tube, there is a need for more detailed solutions. Phenomena such as thermochemical nonequilibrium. or turbulent transition behind the shock are excluded in the assumptions of Mirels' analysis. Additionally there is inadequate capability to predict the influence of the boundary layer on the expanded gas behind the interface. Quantifying the gas in this region is particularly important in expansion tubes because it is the location of the test gas. Unsteady simulations of the viscous flow in shock tubes are computationally expensive because they must follow features such as a shock wave over the length of the facility and simultaneously resolve the small length scales within the boundary layer. As a result, efficient numerical algorithms are required. The numerical approach of the present work is to solve the axisymmetric gas dynamic equations using an finite-volume formulation where the inviscid fluxes are computed with a upwind TVD scheme. Multiple species equations are included in the formulation so that finite-rate chemistry can be modeled. The simulations cluster grid points at the shock and interface and translate this clustered grid with these features to minimize numerical errors. The solutions are advanced at a CFL number of less than one based on the inviscid gas dynamics. To avoid limitations on the time step due to the viscous terms, these terms are treated implicitly. This requires a block tri-diagonal matrix inversion along each line of cells normal to the wall. The cost of this inversion is more than offset by the larger allowable time step. The source terms representing the finite-rate chemical kinetics are also treated implicitly. An algebraic turbulence model for compressible flow is used. The flow in a low pressure shock tube is computed and the results are compared with Mirels'analysis. The driven gas is nitrogen at 70 Pa, and the incident shock speed is approximately 2.9 km/sec so that there is little dissociation. The simulations include a laminar boundary layer and are run until the limiting flow regime is achieved. At this limit, the shock and interface travel at the same velocity because the amount of driven gas between these two features remains the same: the mass flow across the shock is equal to the mass of gas being entrained at the interface by the boundary layer. Simulations with several grids are presented to establish the grid independence of the solution, Good agreement is achieved between Mirels' correlations and the computations. This is expected since the flow conditions are chosen to be consistent with the assumptions used in Mirels' analysis. This comparison adds credibility to the numerical approach and highlights some of the differences between the theory and the detailed simulations. In addition, simulations of the HYPULSE expansion tube are presented for two operating conditions and the computations are compared to experimental data. The operating gas for both cases is nitrogen. One test condition is at a total enthalpy of 15.2 MJ/Kg and a relatively low pressure of 2 kPa. This case is characterized by a laminar boundary layer and significant chemical nonequilibrium. in the acceleration gas. The second test condition is at a total enthalpy of 10.2 MJ/Kg and a pressure of 38 kPa and is characterized by a turbulent boundary layer. The simulations compare well with experiment and reveal that the nonuniformity in pressure observed during the test time is related to variations in the boundary layer displacement thickness.

Wilson, Gregory J.↗

Observations of an ionization ridge containing an embedded O-B cluster in the G10.2-0.3 H II region of W31

VLA radio maps at 5-GHz of the G10.2-0.3 H II region in the W31 complex reveal an extended ionization ridge of dimensions 5.7 x 2.9 sq pc at an assumed distance of 7 kpc. In the ridge, 21 dense clumps have been found with characteristic emission measures of about a million pc/cm to the 6th and electron densities greater than 1000/cu cm, suggesting embedded stars. From estimates of the number of Lyman continuum photos required to support the radio structure, spectral types in the ridge are found which range from B0.5 to O6. The observed radio structure cannot be explained by excitation from a single embedded source, or by expansion of shock-heated gas into the interstellar medium.

Woodward, C. E.↗

Window convolution of the galaxy clustering bispectrum

In galaxy survey analysis, the observed clustering statistics do not directly match theoretical predictions but rather have been processed by a window function that arises from the survey geometry including the sky footprint, redshift-dependent background number density and systematic weights. While window convolution of the power spectrum is well studied, for the bispectrum with a larger number of degrees of freedom, it poses a significant numerical and computational challenge. In this work, we consider the effect of the survey window in the tripolar spherical harmonic decomposition of the bispectrum and lay down a formal procedure for their convolution via a series expansion of configuration-space three-point correlation functions, which was first proposed by Sugiyama et al. (2019). We then provide a linear algebra formulation of the full window convolution, where an unwindowed bispectrum model vector can be directly premultiplied by a window matrix specific to each survey geometry. To validate the pipeline, we focus on the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) luminous red galaxy (LRG) sample in the South Galactic Cap (SGC) in the redshift bin 0.4 ≤ z ≤ 0.6. We first perform convergence checks on the measurement of the window function from discrete random catalogues, and then investigate the convergence of the window convolution series expansion truncated at a finite of number of terms as well as the performance of the window matrix. This work highlights the differences in window convolution between the power spectrum and bispectrum, and provides a streamlined pipeline for the latter for current surveys such as DESI and the Euclid mission.

79 ASTRONOMY AND ASTROPHYSICS↗

High-redshift millennium and astrid galaxies in effective field theory at the field level

Effective field theory (EFT) modeling is expected to be a useful tool in the era of future higher-redshift galaxy surveys such as DESI-II and Spec-S5 due to its robust description of various large-scale structure tracers. However, large values of EFT bias parameters of higher-redshift galaxies could jeopardize the convergence of the perturbative expansion. Here, in this paper we measure the bias parameters and other EFT coefficients from samples of two types of star-forming galaxies in the state-of-the-art MilleniumTNG and astrid hydrodynamical simulations. Our measurements are based on the field-level EFT forward model that allows for precision EFT parameter measurements by virtue of cosmic variance cancellation. Specifically, we consider approximately representative samples of Lyman-break galaxies (LBGs) and Lyman-𝛼 emitters (LAEs) that are consistent with the observed (angular) clustering and number density of these galaxies at 𝑧 = 3. Reproducing the linear biases and number densities observed from existing LAE and LBG data, we find quadratic bias parameters that are roughly consistent with those predicted from the halo model coupled with a simple halo occupation distribution model. We also find nonperturbative velocity contributions (fingers of God) of a similar size for LBGs to the familiar case of luminous red galaxies. However, these contributions are quite small for LAEs despite their large satellite fraction values of up to ∼ 30%. Our results indicate that the effective momentum reach 𝑘 max at 𝑧 = 3 for LAEs (LBGs) will be in the range 0.3−0.6⁢ℎ Mpc −1 (0.2−0.8⁢ℎ Mpc −1 ), suggesting that EFT will perform well for high-redshift galaxy clustering. This work provides the first step toward obtaining realistic simulation-based priors on EFT parameters for LAEs and LBGs.

Sullivan, James M. [Massachusetts Inst. of Technol↗

Computational aspects of chemically reacting flows

An implicit, time-dependent approach is taken to solve the inviscid conservative equations in a vertex-based finite-volume formulation. The convective fluxes are estimated by a modified Riemann solver, and higher-order accuracy is obtained by means of the MUSCL. Implicit techniques are adopted to deal with the equation stiffness as a result of the clustered grid and chemical source term. The real-gas Roe matrix and the ADI and LU schemes have been tested on the sample problems: hypersonic flow over blunt configurations, such as the forebody of a double ellipse, and the near wake of a conic aerobrake. Temperature distribution and standoff distance are validated against the shock-fitting, central-differencing results. Equilibrium temperature may be recovered by artificially increasing the chemical rates at the wall. The present method satisfactorily resolves the flow structure, including the strong expansion behind the flat base. The relative merits and performance of the real-gas TVD and implicit schemes are discussed briefly.

Li, C. P.↗

Ab initio calculations of monopole sum rules: From finite nuclei to infinite nuclear matter

We compute moments of the isoscalar monopole response of 𝑁 = 𝑍 closed-shell nuclei based on chiral nucleon-nucleon plus three-nucleon interactions. We employ the random-phase approximation (RPA) and two ab initio many-body approaches, the in-medium similarity renormalization group (IMSRG) and coupled-cluster theory (CC). In the IMSRG framework, the moments are obtained as ground-state expectation values, whereas in the CC approach, they are evaluated through excited-state calculations. We find good agreement between the IMSRG and CC results across all nuclei studied. RPA provides a reasonable approximation to the correlated methods if the interaction is soft. From the calculated moments, we extract average energies of the monopole response, compute finite-nucleus incompressibilities, and estimate the incompressibility of symmetric nuclear matter by a fit to a leptodermous expansion. Our extrapolated values are lower than those obtained in nuclear-matter calculations with the same interactions, but the values are consistent with phenomenological ranges.

Bonaiti, Francesca [Michigan State Univ., East Lan↗

Selection Effect in Dark Energy Survey Y1

The discovery that the Universe expansion is accelerated poses one of the most profound mysteries in physics. Cosmic acceleration could be a sign of the fact that General Relativity breaks down on cosmological scales and has to be replaced, or it could arise from an unknown form of energy that currently dominates our Universe. That is what we call dark energy and in this case the problem moves to the discovery of its nature. Dark Energy Survey aims to study the nature of dark energy and to test General Relativity and cosmological models. The cluster analysis of the first run of DES leads to results which are incomparable with what other surveys have obtained. In particular it turns out that the matter density of the Universe is $Ω_m = 0.179^{+0.031}_{−0.038}$, very different from the 0.3 value expected. In this work we build a procedure that can be followed in order to understand whether the solution of DES Y1 problem could be a selection effect or not.

43 PARTICLE ACCELERATORS↗

Evolving, dynamical models for collapsed-core globular clusters - M15 and NGC 6624

The stellar populations of the collapsed-core globular clusters M15 and NGC 6624 are investigated by fitting observed surface-brightness and projected velocity-dispersion profiles. The present evolving cluster models were generated by the direct Fokker-Planck method and incorporate realistic stellar mass spectra and energy input from binaries formed by three-body interactions. An evolved power-law mass function with nonluminous remnants of maximum mass 1.0-1.4 solar mass is adopted. M15 is found to be best fitted by postcollapse evolving models with a mass-function slope of x = 0.9 (where x = 1.35 corresponds to the Salpeter mass function) and a maximum remnant mass of 1.3 solar mass. Postcollapse core oscillations, driven by energy input from hard binaries, can produce sufficiently rapid core expansion to explain the resolution of the core of M15 by HST observations reported by Lauer et al. (1991).

Grabhorn, Robert P.↗

DESI2024: Dark Energy Spectroscopic Instrument (DESI) survey, presentation of Year 1 results

The series of papers included in this special issue represent the first cosmological measurements from the Dark Energy Spectroscopic Instrument (DESI). These papers present the validation of the DESI clustering catalogs, the methodology for the cosmology measurements, and the full cosmology implications. These measurements were derived from a catalog of approximately 6.4 million extragalactic sources in a redshift range of 0.1 < z < 4.2. Owing to advances in fiber positioner technology and to a larger telescope, this sample was acquired in only one year of observation, yet is more than double the size of the galaxy and quasar samples from the first four phases of the Sloan Digital Sky Survey (SDSS) that spanned 20 years. With these new galaxy and quasar catalogs, the DESI collaboration completed percent-level constraints on the cosmic expansion history and the growth of structure. In turn, these new measurements provided a new platform from which to test the equation of state of dark energy, the summed mass of the three neutrino mass eigenstates, global curvature, and General Relativity. By surpassing the precision of the previous generation spectroscopic survey, the results in this special issue mark the transition in the field of cosmology to Stage-IV dark energy science.

baryon acoustic oscillations↗

GenomeFace v1.0

GenomeFace is meta-genome binning software. Metagenomic binning, the process of grouping DNA sequences into taxonomic units, is critical for understanding the functions, interactions, and evolutionary dynamics of microbial communities. We propose a deep learning approach to binning using two neural networks, one based on composition and another on environmental abundance, dynamically weighting the contribution of each based on characteristics of the input data. Trained on over 43,000 prokaryotic genomes, our network for composition-based binning is inspired by metric learning techniques used for facial recognition. Using a task-specific, multi-GPU accelerated algorithm to cluster the embeddings produced by our network, our binner leverages marker genes observed to be universally present in nearly all taxa to grade and select optimal clusters of sequences from a hierarchy of candidates. We evaluate our approach on four simulated datasets with known ground truth. Our linear time integration of marker genes recovers more near complete genomes than state of the art but computationally infeasible solutions using them, while being over an order of magnitude faster. Finally, we demonstrate the scalability and acuity of our approach by testing it on three of the largest metagenome assemblies ever performed. Compared to other binners, we produced 47%-183% more near complete genomes. From these datasets, we find over the genomes of over 3000 new candidate species which have never been previously cataloged, representing a potential 4% expansion of the known bacterial tree of life.

Lettich, Richard [Lawrence Berkeley National Labor↗