Search NASA⌕ Search

SEARCH · Search NASA

Results for “Connecticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Poly(cyclosilane) Connectivity Tunes Optical Absorbance

We report herein the influence of skeletal connectivity on the conformation-dependent optical properties of cyclosilane homo- and copolymers. 1,3-Linked cyclosilanes were bathochromically shifted by 20 nm in solution relative to 1,4-linked cyclosilanes, an effect reproduced by quantum chemical calculations on oligomeric model systems. Polysilane optical properties are conformation-dependent, and 1,3-linked cyclosilanes were hypothesized to adopt a favorable conformation unavailable to 1,4-linked cyclosilanes constrained to an endocyclic gauche conformation. Copolymerization of the isomeric cyclosilanes 1,3Si 6 and 1,4Si 6 afforded linear statistical copolymers, as characterized by 1 H and 29 Si NMR spectroscopies. The distinct connectivity of each comonomer was found to give rise to tunable absorption spectra, where the position of the absorption band systematically increased with the increased corporation of 1,3Si 6 . Computational studies pointed to conformation-dependent changes in orbital symmetry in shifting the most intense transition from the low-energy highest occupied molecular orbital (HOMO) → lowest unoccupied molecular orbital (LUMO) transition to a higher-energy HOMO → LUMO + n transition. Here, the results of these studies demonstrate for the first time the role of silicon skeletal connectivity in controlling conformation and optoelectronic properties and provide new insight into the structure-based design of solution-processable silicon-based polymeric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microbial Community Composition in Deep‐Subsurface Reservoir Fluids Reveals Natural Interwell Connectivity

Abstract The identification of natural fractures and the wells they connect is crucial for the development of geological reservoirs because it may have an important impact on reservoir model construction and hydraulic fracture propagation. In this study we investigated the use of a novel data source, the microbial community composition in the reservoir formation fluids, for identification of interwell connectivity caused by natural fractures. We verified this concept at a newly developed mesoscale enhanced geothermal system (EGS) field testbed located 4,850 ft (1,478 m) beneath ground surface at the Sanford Underground Research Facility in Lead, SD. Fluids produced at or near the EGS testbed were sampled and subjected to high‐throughput 16S rRNA gene amplicon sequencing to analyze the microbial community profile therein. Despite the typically substantial heterogeneity across the community profiles of samples spatially distributed (10 m to 1.9 km apart) throughout the site, samples from two wells at the EGS testbed showed highly similar microbial community composition, suggesting the two wells intersected the same natural fracture. This evidence of natural connectivity between the two wells at the EGS testbed was later corroborated by core log analysis and sewer camera surveys into the boreholes. Besides the field case described in this study, microbial community composition as a reservoir diagnostic tool would be applicable in a much broader context such as unconventional hydrocarbon exploitation, groundwater reservoir characterization, and environmental remediation, adding valuable “hard” data capable of pinpointing the origins of fluids unambiguously.

Zhang, Yuran↗
DOE OSTI2020

The Lack of QBO–MJO Connection in CMIP6 Models

Observational analysis has indicated a strong connection between the stratospheric quasi–biennial oscillation (QBO) and tropospheric Madden–Julian oscillation (MJO), with MJO activity being stronger during the easterly phase than the westerly phase of the QBO. We assess the representation of this QBO–MJO connection in 30 models participating in the Coupled Model Intercomparison Project 6. While some models reasonably simulate the QBO during boreal winter, none of them capture a difference in MJO activity between easterly and westerly QBO that is larger than that which would be expected from the random sampling of internal variability. The weak signal of the simulated QBO–MJO connection may be due to the weaker amplitude of the QBO than observed, especially between 100 to 50 hPa. This weaker amplitude in the models is seen both in the QBO–related zonal wind and temperature, the latter of which is thought to be critical for destabilizing tropical convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Captured QBO‐MJO Connection in a Subseasonal Prediction System

Abstract The quasi‐biennial oscillation (QBO) impacts the Madden‐Julian Oscillation (MJO) activity with a stronger MJO in QBO easterly (QBOE) than QBO westerly (QBOW) winters. However, this relationship is poorly represented in the current generation climate models. For the first time, this paper applies a stratospheric zonal‐mean nudging in a subseasonal prediction system to capture it. Two strong MJO cases in a QBO‐neutral winter are investigated. The QBO temperature and zonal wind anomalies are added separately as well as together to the stratosphere using nudging in MJO case hindcast. Only by nudging the QBO temperature anomalies while leaving the zonal wind free, can the prediction system capture the observed QBO‐MJO connection. The tropopause instability is found positively correlated to the MJO amplitude, but it cannot fully explain the captured connection. The free‐evolving zonal wind anomalies in the stratosphere due to the nudged QBO temperature are crucial for the captured connection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Lack of a QBO-MJO Connection in Climate Models With a Nudged Stratosphere

The observed stratospheric quasi-biennial oscillation (QBO) and the tropospheric Madden-Julian oscillation (MJO) are strongly connected in boreal winter, with stronger MJO activity when lower-stratospheric winds are easterly. However, the current generation of climate models with internally generated representations of the QBO and MJO do not simulate the observed QBO-MJO connection, for reasons that remain unclear. Furthermore, this study builds on prior work exploring the QBO-MJO link in climate models whose stratospheric winds are relaxed toward reanalysis, reducing stratospheric biases in the model and imposing a realistic QBO. A series of ensemble experiments are performed using four state-of-the-art climate models capable of representing the MJO over the period 1980–2015, each with similar nudging in the stratosphere. In these four models, nudging leads to a good representation of QBO wind and temperature signals, however no model simulates the observed QBO-MJO relationship. Biases in MJO vertical structure and cloud-radiative feedbacks are investigated, but no conclusive model bias or mechanism is identified that explains the lack of a QBO-MJO connection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Climate-driven tradeoffs between landscape connectivity and the maintenance of the coastal carbon sink

Abstract Ecosystem connectivity tends to increase the resilience and function of ecosystems responding to stressors. Coastal ecosystems sequester disproportionately large amounts of carbon, but rapid exchange of water, nutrients, and sediment makes them vulnerable to sea level rise and coastal erosion. Individual components of the coastal landscape (i.e., marsh, forest, bay) have contrasting responses to sea level rise, making it difficult to forecast the response of the integrated coastal carbon sink. Here we couple a spatially-explicit geomorphic model with a point-based carbon accumulation model, and show that landscape connectivity, in-situ carbon accumulation rates, and the size of the landscape-scale coastal carbon stock all peak at intermediate sea level rise rates despite divergent responses of individual components. Progressive loss of forest biomass under increasing sea level rise leads to a shift from a system dominated by forest biomass carbon towards one dominated by marsh soil carbon that is maintained by substantial recycling of organic carbon between marshes and bays. These results suggest that climate change strengthens connectivity between adjacent coastal ecosystems, but with tradeoffs that include a shift towards more labile carbon, smaller marsh and forest extents, and the accumulation of carbon in portions of the landscape more vulnerable to sea level rise and erosion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Machine learning prediction of connectivity, biodiversity and resilience in the Coral Triangle

Abstract Even optimistic climate scenarios predict catastrophic consequences for coral reef ecosystems by 2100. Understanding how reef connectivity, biodiversity and resilience are shaped by climate variability would improve chances to establish sustainable management practices. In this regard, ecoregionalization and connectivity are pivotal to designating effective marine protected areas. Here, machine learning algorithms and physical intuition are applied to sea surface temperature anomaly data over a twenty-four-year period to extract ecoregions and assess connectivity and bleaching recovery potential in the Coral Triangle and surrounding oceans. Furthermore, the impacts of the El Niño Southern Oscillation (ENSO) on biodiversity and resilience are quantified. We find that resilience is higher for reefs north of the Equator and that the extraordinary biodiversity of the Coral Triangle is dynamic in time and space, and benefits from ENSO. The large-scale exchange of genetic material is enhanced between the Indian Ocean and the Coral Triangle during La Niña years, and between the Coral Triangle and the central Pacific in neutral conditions. Through machine learning the outstanding biodiversity of the Coral Triangle, its evolution and the increase of species richness are contextualized through geological times, while offering new hope for monitoring its future.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Evaluating Connected and Automated Vehicles in Co-Simulation Environment of Traffic Microsimulation and Vehicle Dynamics

Connected and automated vehicles (CAVs) have the potential to improve many aspects of the current transportation systems such as safety, mobility, and energy efficiency. In order to evaluate the benefits and impacts of a CAV, the CAV control algorithm is typically implemented on vehicles simulated in a traffic microsimulation environment. However, traffic microsimulation usually lacks detailed vehicle and powertrain dynamics, making it challenging to fully understand how a CAV control algorithm will perform and respond on an actual vehicle. Whether the same benefits measured in the simulation will also be observed in real-world remains an open question. One potential approach to fill in this gap is to conduct a co-simulation of traffic microsimulation with detailed vehicle and powertrain dynamics models, often developed in MATLAB Simulink. However, current microsimulation tools such as VISSIM and SUMO do not have a ready-to-use interface for co-simulation with vehicle dynamics and Simulink. Also, even if such an interface exists, it will be tool-specific, making it challenging to shift from one tool to another or test CAV controls in different tools. There are needs for tool-agnostic co-simulation as different microsimulation tools have their pros and cons, and researchers often need to use different tools based on the purposes of the simulation, project needs, and applications. In this work, Flexible Interface for X-in-the-loop Simulation (FIXS) is developed that can support the co-simulation of microsimulation, CAV control algorithm, and vehicle dynamics model in Simulink. Enabled by the FIXS, the benefit and performance of a CAV control algorithm can be better understood with the consideration of vehicle responses and dynamics. The connection to VISSIM and SUMO is handled internally by the interface, and users can easily switch tools by changing a configuration file. The co-simulation capability is demonstrated for a VISSIM eco-approach and departure CAV scenario and a SUMO cooperative merging scenario for both a passenger CAV and a class 8 heavy-duty connected and automated trucks.

Shao, Yunli↗
DOE OSTI2021

Optimizing the differential connection schemes for detecting 3D magnetic perturbations in DIII-D

Optimizing the differential pair connection scheme (i.e. the set of pairs) of a toroidal array of magnetic sensors dedicated to measuring slowly rotating asymmetric fields can enhance the mode number detection capability and failure-resilience. In this work the condition number obtained from singular value decomposition (SVD) of the design matrix is used as a metric to evaluate the quality of a connection scheme. A large number of possible pair connections are usually available, so evaluating all of them may require extensive use of computational resources and can be very time consuming. Alternative methods to reduce the number of pairs evaluated without losing the capabilities of toroidal mode detection are presented in this paper. Here, three examples of the applications of such analysis for the 3D magnetic diagnostic system of DIII-D are also presented: the addition of two new toroidal arrays with n > 3 detection capabilities, the modification of an existing toroidal array in the low field side of the machine to accommodate the addition of a helicon antenna, and the design of changes in several toroidal arrays in the high field side to accommodate the addition of a lower hybrid current drive antenna on the center post.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Connection between the physicochemical characteristics of amorphous carbon thin films and their electrochemical properties

Connecting a material's surface chemistry with its electrocatalytic performance is one of the major questions in analytical electrochemistry. This is especially important in many sensor applications where analytes from complex media need to be measured. Unfortunately, today this connection is still largely missing except perhaps for the most simple ideal model systems. Here we present an approach that can be used to obtain insights about this missing connection and apply it to the case of carbon nanomaterials. In this paper we show that by combining advanced computational techniques augmented by machine learning methods with x-ray absorption spectroscopy (XAS) and electrochemical measurements, it is possible to obtain a deeper understanding of the correlation between local surface chemistry and electrochemical performance. As a test case we show how by computationally assessing the growth of amorphous carbon (a-C) thin films at the atomic level, we can create computational structural motifs that may in turn be used to deconvolute the XAS data from the real samples resulting in local chemical information. Then, by carrying out electrochemical measurements on the same samples from which x-ray spectra were measured and that were further characterized computationally, it is possible to gain insight into the interplay between the local surface chemistry and electrochemical performance. To demonstrate this methodology, we proceed as follows: after assessing the basic electrochemical properties of a-C films, we investigate the effect of short HNO 3 treatment on the sensitivity of these electrodes towards an inner sphere redox probe dopamine to gain knowledge about the influence of altered surface chemistry to observed electrochemical performance. Overall, these results pave the way towards a more general assessment of electrocatalysis in different systems and provide the first steps towards data driven tailoring of electrode surfaces to gain optimal performance in a given application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Variation in supercurrent connectivity and vortex pinning of state-of-the-art pulsed laser deposited RE Ba 2 Cu 3 O 7- x coated conductors

REBa 2 Cu 3 O 7-x (REBCO, RE: rare earth) coated conductors (CCs) suffer from great critical current I c differences between different manufacturers, I c variations within individual manufacturers, and often significant lengthwise fluctuations. The understanding of such variations is complicated by the lack of a direct correlation between I c and the critical current density J c . In fact, although J c is the fundamental property determined by the local vortex pinning landscape, I c is often limited by variable current blocking mechanisms. An important practical complexity is commercial practices of performing J c and I c evaluations based on I c at 77 K and self-field (sf), where connectivity variation dominates over vortex pinning variations. However, at higher fields and lower temperatures, vortex pinning becomes more complex and highly variable, making predictions of I c and J c at arbitrary temperature T, magnetic field H, and field orientation θ, quite uncertain. To address some aspects of this problem, we conducted detailed spool-to-spool performance characterization on recently manufactured REBCO CCs. Despite J c (77 K, sf) varies by only ∼11%, J c (77 K, 1 T) of its minimum and maximum (for H//ab-plane) show variations of ∼21% and ∼32%, respectively. This emphasizes the shortcoming in using J c (77 K, sf) as parameter for evaluating even the low field performance. An even more remarkable spool-to-spool J c variation of ∼68% was observed at 20 K and 15 T for H//ab-plane. To identify the origin of such lack of reproducibility we performed microstructural characterizations, which revealed, within the REBCO layer, large variation in the density of copper oxide (CuO x ) particles ranging from 0.1 to 2 μm in size. We believe that they play a decisive role in reducing the effective cross-section of the REBCO layer by not simply blocking current themselves, but also by nucleating off-axis REBCO grains, whose misoriented grain boundaries adversely impact REBCO grain-to-grain connectivity. The REBCO growth associated with high density CuO x particles also leads to the more disordered spatial arrangement of BaHfO 3 precipitate arrays, which, when self-aligning along the ab-planes, generate stronger pinning enhancing J c (H//ab) at all temperatures. In this way, we established that variations of both connectivity and vortex pinning are thus directly coupled. Our results also explain why the so-called ‘lift-factor’, typically defined by the ratio between I c (T, H) and I c (77 K, sf), frequently turns out to be unreliable.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The PDF perspective on the tracer-matter connection: Lagrangian bias and non-Poissonian shot noise

ABSTRACT We study the connection of matter density and its tracers from the probability density function (PDF) perspective. One aspect of this connection is the conditional expectation value 〈δtracer|δm〉 when averaging both tracer and matter density over some scale. We present a new way to incorporate a Lagrangian bias expansion of this expectation value into standard frameworks for modelling the PDF of density fluctuations and counts-in-cells statistics. Using N-body simulations and mock galaxy catalogues we confirm the accuracy of this expansion and compare it to the more commonly used Eulerian parametrization. For haloes hosting typical luminous red galaxies, the Lagrangian model provides a significantly better description of 〈δtracer|δm〉 at second order in perturbations. A second aspect of the matter-tracer connection is shot-noise, i.e. the scatter of tracer density around 〈δtracer|δm〉. It is well known that this noise can be significantly non-Poissonian and we validate the performance of a more general, two-parameter shot-noise model for different tracers and simulations. Both parts of our analysis are meant to pave the way for forthcoming applications to survey data.

Friedrich, Oliver↗
DOE OSTI2023

MultiCAM: a multivariable framework for connecting the mass accretion history of haloes with their properties

ABSTRACT Models that connect galaxy and halo properties often summarize a halo’s mass accretion history (MAH) with a single value and use this value as the basis for predictions. However, a single-value summary fails to capture the complexity of MAHs and information can be lost in the process. We present MultiCAM, a generalization of traditional abundance matching frameworks, which can simultaneously connect the full MAH of a halo with multiple halo and/or galaxy properties. As a first case study, we apply MultiCAM to the problem of connecting dark matter halo properties to their MAHs in the context of a dark matter-only simulation. While some halo properties, such as concentration, are more strongly correlated to the early-time mass growth of a halo, others, like the virial ratio, have stronger correlations with late-time mass growth. This highlights the necessity of considering the impact of the entire MAH on halo properties. For most of the halo properties we consider, we find that MultiCAM models that use the full MAH achieve higher accuracy than conditional abundance matching models that use a single epoch. We also demonstrate an extension of MultiCAM that captures the covariance between predicted halo properties. This extension provides a baseline model for applications where the covariance between predicted properties is important.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Xylem network connectivity and embolism spread in grapevine( Vitis vinifera L.)

Abstract Xylem networks are vulnerable to the formation and spread of gas embolisms that reduce water transport. Embolisms spread through interconduit pits, but the three-dimensional (3D) complexity and scale of xylem networks means that the functional implications of intervessel connections are not well understood. Here, xylem networks of grapevine (Vitis vinifera L.) were reconstructed from 3D high-resolution X-ray micro-computed tomography (microCT) images. Xylem network performance was then modeled to simulate loss of hydraulic conductivity under increasingly negative xylem sap pressure simulating drought stress conditions. We also considered the sensitivity of xylem network performance to changes in key network parameters. We found that the mean pit area per intervessel connection was constant across 10 networks from three, 1.5-m stem segments, but short (0.5 cm) segments fail to capture complete network connectivity. Simulations showed that network organization imparted additional resistance to embolism spread beyond the air-seeding threshold of pit membranes. Xylem network vulnerability to embolism spread was most sensitive to variation in the number and location of vessels that were initially embolized and pit membrane vulnerability. Our results show that xylem network organization can increase stem resistance to embolism spread by 40% (0.66 MPa) and challenge the notion that a single embolism can spread rapidly throughout an entire xylem network.

Wason, Jay↗
DOE OSTI2025

Hadronic Vacuum Polarization for the Muon 𝑔 − 2 from Lattice QCD: Long-Distance and Full Light-Quark Connected Contribution

We present results for the dominant light-quark connected contribution to the long-distance window of the hadronic vacuum polarization (HVP) contribution to the muon 𝑔 − 2 from lattice quantum chromodynamics. Specifically, with a new determination of the lattice scale on MILC’s physical-mass HISQ ensembles, using the Ω− baryon mass, we obtain a result of 𝑎$^{𝑙⁢𝑙,LD}_{𝜇}$⁡(conn) = 400.2⁢(2.3) stat ⁢(3.7) syst ⁢[4.3] total × 10 −10 . Summing this result with our recent determinations of the light-quark connected contributions to the short- and intermediate-distance windows, we obtain a subpercent precision determination of the light-quark-connected contribution to HVP of 𝑎$^{𝑙⁢𝑙}_{𝜇}$⁡(conn) = 655.2⁢(2.3) stat ⁢(3.9) syst ⁢[4.5]total×10 −10 . Finally, as a consistency check, we verify that an independent analysis of the full contribution is in agreement with the sum of individual windows. We discuss our future plans for improvements of our HVP calculations to meet the target precision of the Fermilab 𝑔 − 2 experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Strong Aharonov-Bohm quantum interference in simply connected LaAlO 3 /SrTiO 3 structures

We report Aharonov-Bohm (AB) type quantum interference in simply connected devices created at the LaAlO 3 /SrTiO 3 interface using conductive atomic force microscope (c-AFM) lithography. The oscillations are multiperiodic functions of magnetic field strength, and they exhibit a substantial magnetic hysteresis with frequencies that depend on the magnetic sweep direction. The oscillation amplitude for the lowest two frequencies approaches $e^2/h$, consistent with the theoretical maximum for the AB effect, and harmonics up to third order are observable. Broadband quasiperiodic behavior is reported in a fraction of simply connected electron waveguide devices that exhibit magnetic asymmetries. Curiously, nanoscale ring devices that are multiply connected lack signatures of AB quantum interference. In this work, the interference phenomena are associated with an inhomogeneous magnetic landscape within theLaAlO 3 /SrTiO 3 nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Expansive open Fermi arcs and connectivity changes induced by infrared phonons in ZrTe 5

Expansive open Fermi arcs covering most of the surface Brillouin zone (SBZ) are desirable for detection and control of many topological phenomena, but they have generally been reported for Kramers-Weyl points, or unconventional chiral fermions, pinned at time-reversal invariant momentum in chiral materials. Here using first-principles band structure calculations, we show that for conventional Weyl points in ZrTe 5 with the chirality of +1/–1 near the BZ center at general momentum induced by one of the infrared phonons—the second lowest $B_{1u}$ mode for breaking inversion symmetry—they can also form expansive open Fermi arcs across the SBZ boundary to occupy most of the SBZ when projected on the (001) surface. In this work, we reveal that such expansive open Fermi arcs are evolved from the topological surface states that connect multiple surface Dirac points on the (001) surface of the topological insulator phases without lattice distortion in ZrTe 5 . Furthermore, we find that the connectivity of the induced open Fermi arcs can be changed by the magnitude of the lattice distortion of this infrared phonon mode. Thus, we propose that using coherent optical phonons to modulate lattice parameters can offer ways to induce unique topological features including expansive open Fermi arcs and to dynamically control Fermi arc connectivity in ZrTe 5 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Data-driven estimates for light-quark-connected and strange-plus-disconnected hadronic g − 2 window quantities

A number of discrepancies have emerged between lattice computations and data-driven dispersive evaluations of the RBC/UKQCD intermediate-window-hadronic contribution to the muon anomalous magnetic moment. It is therefore interesting to obtain data-driven estimates for the light-quark-connected and strange-plus-disconnected components of this window quantity, allowing for a more detailed comparison between the lattice and data-driven approaches. The aim of this paper is to provide these estimates, extending the analysis to several other window quantities, including two windows designed to focus on the region in which the two-pion contribution is dominant. Clear discrepancies are observed for all light-quark-connected contributions considered, while good agreement with lattice results is found for strange-plus-disconnected contributions to the quantities for which corresponding lattice results exist. The largest of these discrepancies is that for the RBC/UKQCD intermediate window, where, as previously reported, our data-driven result, a μ W 1 , lqc = 198.9 ( 1.1 ) × 10 − 10 , is in significant tension with the results of 8 different recent lattice determinations. Our strategy is the same as recently employed in obtaining data-driven estimates for the light-quark-connected and strange-plus-disconnected components of the full leading-order hadronic vacuum polarization contribution to the muon anomalous magnetic moment. Updated versions of those earlier results are also presented, for completeness. Published by the American Physical Society 2024

Benton, Genessa (ORCID:0009000515763654)↗