Search NASA⌕ Search

SEARCH · Search NASA

Results for “DEGASSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Workshop on Water on Mars

The opening session of the Workshop focused on one of the most debated areas of Mars volatiles research-the size of the planet's past and present bulk water content. Current estimates of the inventory of H2O on Mars range from an equivalent layer of liquid 10-1000 meters deep averaged over the planet's surface. The most recent of these estimates, presented at the Workshop, is based on the now popular belief that the SNC class of meteorites represent actual samples of the Martian crust. From a model of planetary accretion and degassing founded on this assumption, it was determined that the present inventory of H2O on Mars is equivalent to a global layer no more than 50 meters deep. During the discussion generated by this estimate, several investigators expressed reservations about an H2O inventory as small as a few tens of meters, for it appears to directly contradict the seemingly abundant morphologic evidence that Mars is (or has been) water rich. Others, however, argued that the interpretation of much of this morphologic evidence is at best equivocal and that the case for a wet Mars is far from established. Atmospheric water vapor measurements, compiled by Earth based telescopes and the Viking Orbiter Mars Atmospheric Water Detectors (MAWD), now span a period of over six Martian years. Analysis of this data suggests that the seasonal cycle is governed by both the sublimation and condensation of H2O at the poles and by its adsorption/desorption within the regolith. So far, efforts to simulate the seasonal vapor cycle have failed to reproduce the observed behavior.

Clifford, S.↗
NASA NTRS1985

Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys

The effects of alloy chemistry and particulate morphology on consolidation behavior and consolidated product properties in rapid solidification processed, powder-metallurgical Al-3Li-1.5Cu-1Mg-0.5Co-0.2Zr and Al-4.4Cu-1.5Mg-Fe-Ni-0.2Zr extrusions and forgings were studied. Microstructures and mechanical properties of both alloys are largely unaffected by particulate production method (vacuum atomization, ultrasonic atomization, or twin-roller quenching) and by particulate solidification rates between 1000 and 100,000 K/s. Consolidation processing by canning, cold compaction, degassing, and hot extrusion is sufficient to yield mechanical properties in the non-Li-containing alloy extrusions which are similar to those of 7075-Al, but ductilities and fracture toughnesses are inferior owing to poor interparticle bonding caused by lack of a vacuum-hot-pressing step during consolidation. Mechanical properties of extrusions are superior to those of forgings owing to the stronger textures produced by the more severe hot working during extrusion. The effects on mechanical properties of dispersoid size and volume fraction, substructural refinement, solid solution strengthening by Mg, and precipitate size and distribution are elucidated for both alloy types.

Meschter, P. J.↗
NASA NTRS1986

Nitrogen and light noble gases in Shergotty

Two samples of Shergotty and a sample of EETA 79001's lithology A have been analyzed for N, He, Ne, and Ar abundances and isotopic composition. After correcting for spallogenic nitrogen, the nitrogen isotopic ratios were found to be close to that of the terrestrial atmosphere. The spallogenic noble gas data are consistent with cosmic ray irradiation of both Shergotty and EETA 79001 at shallow shielding depths. Cosmic ray exposure ages were estimated to be in the range of 0.5-0.8 Myr for EETA 79001, and of 2.0-5.2 Myr for Shergotty, depending on the choice of object size and shielding. Among the two Shergotty samples, the contents of Ar-40 differed by a factor of 3. This difference can be attributed to either a small-scale mineralogical inhomogeneity or a significant variation in the degree of degassing of minerals during shock, although the presence of trapped argon with a high Ar-40/Ar-36 ratio and its heterogeneous distribution cannot be ruled out.

Becker, R. H.↗
NASA NTRS1987

Getter Capsules for Heat-Transport Systems

Metal absorbs hydrogen dissolved in heat-transfer fluids. Blockages by hydrogen gas in refrigerators, heat pipes, and other two-phase heat-transport systems eliminated by use of degassing metals or alloys called getters. Getter contained in getter capsule placed in series or in parallel with heat-transport loop. Gas-removal technique more specific and more reliable in solving problem of gas blockage than older procedures.

Seidenberg, Benjamin↗
NASA NTRS1987

Advanced powder metallurgy aluminum alloys via rapid solidification technology, phase 2

Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Four classes of alloys, namely, Al-Li based (class 1), 2124 type (class 2), high temperature Al-Fe-Mo (class 3), and PM X7091 type (class 4) alloy, were produced as melt-spun ribbons. The ribbons were pulverized, cold compacted, hot-degassed, and consolidated through single or double stage extrusion. The mechanical properties of all four classes of alloys were measured at room and elevated temperatures and their microstructures were investigated optically and through electron microscopy. The microstructure of class 1 Al-Li-Mg alloy was predominantly unrecrystallized due to Zr addition. Yield strengths to the order of 50 Ksi were obtained, but tensile elongation in most cases remained below 2 percent. The class 2 alloys were modified composition of 2124 aluminum alloy, through addition of 0.6 weight percent Zr and 1 weight percent Ni. Nickel addition gave rise to a fine dispersion of intermetallic particles resisting coarsening during elevated temperature exposure. The class 2 alloy showed good combination of tensile strength and ductility and retained high strength after 1000 hour exposure at 177 C. The class 3 Al-Fe-Mo alloy showed high strength and good ductility both at room and high temperatures. The yield and tensile strength of class 4 alloy exceeded those of the commercial 7075 aluminum alloy.

Ray, Ranjan↗
NASA NTRS1987

Shock effects and argon loss in samples of the Leedey L6 chondrite experimentally shocked to 29-70 GPa pressures

The recovery of polished 600-micron-thick 7-mm-diameter disk samples and powder samples of the Leedey L6 chondrite from 29-70-GPa experimental shocks is investigated experimentally under vacuum conditions, with a focus on the possible direct shock loss of radiogenic Ar. The results of petrographic examination of the shocked samples and Ar isotope measurements are presented in tables, graphs, and micrographs and characterized in detail. The principal damage mechanisms are identified as mechanical disaggregation and increasing cataclasis, with little melting. The degassing of radiogenic Ar is found to be relatively modest and to increase with shock pressure and sample porosity; it is attributed to a combination of mechanical grain disruption and feldspar melting. It is inferred that Ar loss in naturally shocked materials (especially those showing few signs of melting) probably occurs during extended exposure to high temperatures during impact formation.

Bogard, Donald↗
NASA NTRS1987

What SNC meteorites tell us about Martian magmatism

The SNC meteorites record relatively recent (less than b.y.) basaltic volcanism on a hydrous planet with a core. This much was known about Mars even before the Viking mission. The SNCs tell that the basalts were unusually low in Al2O3 and, despite overall similarities in major elements, apparently sampled two isotopically distinct regions of Mars: one is relatively depleted in incompatible elements (Nahklite source) with a U-Pb model age of 4.3 b.y. and is probably a portion of the upper Martian mantle, whereas the other is relatively enriched in incompatible elements (Shergottite source) with a 4.5 b.y. U-Pb age and is probably Martian crust assimulated into the mantle-derived Shergottite magma. The SNCs tell that the overall abundances of moderately volatile elements, such as alkalies, are higher on Mars than on earth. Given extensive volcanism and a depleted mantle, the present day absence of a thick atmosphere is more likely due to catastrophic removal of a primordial atmosphere than lack of degassing.

Longhi, John↗
NASA NTRS1987

The atmospheres of Venus, earth, and Mars - A critical comparison

The physical conditions and structures, chemical compositions, origins, and evolutions of the earth, Mars, and Venus atmospheres are compared, summarizing the results of recent theoretical and observational investigations. Data are compiled in extensive tables, graphs, and diagrams and characterized in detail. Consideration is given to the roles of chemical cycles and biology; global changes in atmospheric composition; the secondary origin of all three atmospheres; volatile retention by solid grains in the solar nebula; volatile degassing and atmosphere formation; and evolutionary processes, sources, cycles, and sinks.

Prinn, Ronald G.↗
NASA NTRS1987

Climatic effects of enhanced CO2 levels in Mars early atmosphere

Results are presented of one-dimensional radiation convection modeling of the early Mars atmosphere. Up to 5 bars of CO2 would have been required to raise the surface temperature (orbitally and globally averaged) above the freezing point, although at the equator at perihelion, 1 bar would have sufficed. Such an atmospheric CO2 invertory, the author argued, is not inconsistent with any known constraint on Mars' degassed volatile inventory.

Kasting, James F.↗
NASA NTRS1988

Surface compositional and structural aspects of Martian samples

There are many excellent reasons to examine the surface composition of a wide range of Martian samples. The existing spectral data indicate that many dust and soil particles have a thin Fe(+3) layer with a typical particle size in the 10 micrometer to 400 micrometer range. In view of the high CO2 content of the atmosphere, one might expect that surface carbonates should be present. In addition to chemisorbed material there will probably exist physisorbed atmospheric components of the atmosphere including oxygen, nitrogen and water vapor. The latter could possibly give rise to some hydrated minerals. Using ultra-high-vacuum/mass spectrographic techniques it should be possible to detect physisorbed and moderately strong chemisorbed species on the particle surfaces with a temperature programmed degassing procedure. In some instances such an approach is capable of helping distinguish between volcanic and impact generated materials by detecting the presence of fumerolic gases. Such gases typically condense on the exterior of the ejected particles. Additionally surface atomic and chemical compositions should be examined by a combination of modern surface analytical techniques. The combination we currently have in Buffalo at SUNY would appear to be one of the best available including ESCA (150 micrometer spot capability) Auger (SAM) with 300 A focussing for surface compositional surveys, SIMS for high sensitivity trace element detection and ISS for immediate surface layer analysis.

Cadenhead, D. A.↗
NASA NTRS1988

The Manson impact structure, a possible site for a Cretaceous-Tertiary (K-T) boundary impact

The Manson impact structure, about 35 km in diameter, is the largest impact crater recognized in the United States. Its center is located near the town of Manson, 29 km west of Fort Dodge, Iowa. The structure is not well known geologically because it is covered by tens of meters of glacial deposits. What is known about the structure was learned mostly from the study of water well cuttings. At Manson the normal Phanerozoic and Proterozoic sedimentary rocks were replaced by centrally uplifted Proterozoic crystalline rocks that are representative of the normal basement: This central uplift is surrounded by completely disrupted rocks which are roughly encircled by peripherally faulted and slumped sequences of normal sedimentary strata. Radially outward normal sedimentary strata are uplifted slightly. Manson, once interpreted as a cryptovolcanic structure, is now considered an impact structure based on its circular shape, its central uplift and the presence of multiple intersecting sets of shock lamellae in quartz grains from the central uplift. The Ar-40/Ar-39 age spectrum dating results for a microcline separate from the Manson 2-A core in the central uplift is shown. This spectrum is interpreted to indicate a nearly complete degassing of the microcline at the time of the Manson impact. The remainder of the gas released climbs in age with increasing temperature of release. This pattern of the age spectrum is interpreted to represent diffusional loss due to reheating at the time of the impact and during subsequent cooling. Shocked quartz grains, present in the iridium-bearing layer at the K-T boundary throughout the world, have a significantly larger size and are more abundant in the western interior of North America than elsewhere in the world. Furthermore, shocked feldspar and granitic fragments are found at the K-T boundary in North America. These observations indicate the K-T boundary impact must have penetrated continental crust in North America.

Hartung, J. B.↗
NASA NTRS1988

Trapping Ne, Ar, Kr, and Xe in Si2O3 smokes

Simple Si2O3 smokes have been condensed at both low (less than 750 K) and high (greater than 1000 K) temperature at 35 torr H2 pressure in the presence of 0, 10, 100, and 1000 microns of a noble gas mixture containing Ne, Ar, Kr, and Xe. In general, both Ne and Ar are quite loosely bound in the smokes (6.0 x 10 to the -8th and 2.6 x 10 to the -4th ccSTP/g, respectively), and are degassed at temperatures below 1200 K. Both Kr and Xe are somewhat more strongly bound at concentrations of 1.0 x 10 to the -7th and 8.2 x 10 to the -8th ccSTP/g, respectively, and in addition show a double release with a second component at a temperature of about 1875 K. With the exception that Si2O3 smokes appear to show a particular affinity for argon, possibly due to an anomalous absorption of atmospheric argon, none of the other noble gases are found in sufficient concentration to explain the gases observed in meteorites as primary circumstellar condensates. However, this data in conjunction with observations of Honda et al. (1979) do seem to show a degree of dependence between noble gas retention and chemical composition.

Nuth, Joseph A., III↗
NASA NTRS1988

Dispersion strengthening of precipitation hardened Al-Cu-Mg alloys prepared by rapid solidification and mechanical alloying

Several Al-4Cu-1Mg-1.5Fe-0.75Ce alloys have been processed from either rapidly solidified or mechanically alloyed powder using various vacuum degassing parameters and consolidation techniques. Strengthening by the fine subgrains, grains, and the dispersoids individually or in combination is more effective when the alloys contain shearable precipitates; consequently, the strength of the alloys is higher in the naturally aged rather than the artificially aged condition. The strengths of the mechanically alloyed variants are greater than those produced from prealloyed powder. Properties and microstructural features of these dispersion strengthened alloys are discussed in regards to their processing histories.

Gilman, P. S.↗
NASA NTRS1989

C-13/C-12 of atmospheric CO2 in the Amazon basin - Forest and river sources

Results are presented of measurements of the CO2 concentrations and C-13/C-12 ratios in CO2 in air samples collected from within the Amazonian rain forest and over the Amazon river between 1982 and 1987. Results indicate the presence of a diurnal cycle in the CO2 concentration and the C-13/C-12 ratio. It was found that the CO2 input to air in the forest was derived from the soil respiration, and the CO2 input to air over the Amazon river was derived from the degassing of CO2 from the river. It was also found that plants growing at heights lower than 7 m assimilate soil-derived CO2 with a low C-13/C-12 ratio.

Quay, Paul↗
NASA NTRS1990

Carbon dioxide emissions from Deccan volcanism and a K/T boundary greenhouse effect

A greenhouse warming caused by increased emissions of carbon dioxide from the Deccan Traps volcanism has been suggested as the cause of the terminal Cretaceous extinctions on land and in the sea. Total eruptive and noneruptive CO2 output by the Deccan eruptions (from 6 to 20 x 10 to the 16th moles) over a period of several hundred thousand years is estimated based on best estimates of the CO2 weight fraction of the original basalts and basaltic melts, the fraction of CO2 degassed, and the volume of the Deccan Traps eruptions. Results of a model designed to estimate the effects of increased CO2 on climate and ocean chemistry suggest that increases in atmospheric pCO2 due to Deccan Traps CO2 emissions would have been less than 75 ppm, leading to a predicted global warming of less than 1 C over several hundred thousand years. It is concluded that the direct climate effects of CO2 emissions from the Deccan eruptions would have been too weak to be an important factor in the end-Cretaceous mass extinctions.

Caldeira, Ken↗
NASA NTRS1990

Drop coalescence studies

The objective of this experimental study is to understand the detailed mechanics of the coalescence of liquid drops. The experiments are being conducted in an immiscible acoustic levitator with degassed water as the host medium. Typically, a quasineutrally buoyant drop of silicon oil mixed with bromobenzene is levitated close to the velocity node of the levitator. A second drop of the same liquid is introduced, and as it slowly seeks levitation position, the drops coalesce. Coalescence is delayed until the host film between drops is completely drained. Following coalescence, the excess surface energy in the coalesced drop is dissipated through shape oscillations. The final events of film rupture followed by drop coalescence are rapid and are photographically studied with high-speed video (1000 fps). The laser-induced fluorescence technique is used to visualize the dynamics of host film drainage. The details of the coalescence mechanics are presented.

Anikumar, A. V.↗
NASA NTRS1990

(Ar-39)-(Ar-40) dating of mesosiderites - Evidence for major parent body disruption less than 4 Ga ago

The (Ar-39) (Ar-40) chronologies were determined for 14 different mesosiderites representing the full range of classification according to recrystallization, and these chronologies were compared with analogous data for other meteorite types and for lunar highland rocks. Results of Ar-Ar chronologies indicate the history of a degassing of Ar due to a major thermal event that occurred less than 3.9 Ga ago; this event is not the metal-silicate mixing event, which is known to have occurred earlier than 4.4 Ga ago. It is suggested that a major collisional disruption-reassembly event less than 3.9 Ga ago took place, leaving the metal-silicate breccias buried under tens of kilometers of rubble, where they cooled slowly through the Ar closure temperatures.

Bogard, D. D.↗