Search NASA⌕ Search

SEARCH · Search NASA

Results for “DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Photo‐/Thermal‐Responsive Field‐Effect Transistor upon Blending Polymeric Semiconductor with Hexaarylbiimidazole toward Photonically Programmable and Thermally Erasable Memory Device

Abstract It is shown that the semiconducting performance of field‐effect transistors (FETs) with PDPP4T (poly(diketopyrrolopyrrole‐quaterthiophene)) can be reversibly tuned by UV light irradiation and thermal heating after blending with the photochromic hexaarylbiimidazole compound ( p ‐NO 2 ‐HABI). A photo‐/thermal‐responsive FET with a blend thin film of PDPP4T and p ‐NO 2 ‐HABI is successfully fabricated. The transfer characteristics are altered significantly with current enhanced up to 10 6 ‐fold at V G = 0 V after UV light irradiation. However, further heating results in the recovery of the transfer curve. This approach can be extended to other semiconducting polymers such as P3HT (poly(3‐hexyl thiophene)), PBTTT (poly(2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b] thiophene)) and PDPPDTT (poly(diketopyrrolopyrrole‐dithienothiophene)). It is hypothesized that TPIRs (2,4,5‐triphenylimidazolyl radicals) formed from p ‐NO 2 ‐HABI after UV light irradiation can interact with charge defects at the gate dielectric–semiconductor interface and those in the semiconducting layer to induce more hole carriers in the semiconducting channel. The application of the blend thin film of PDPP4T and p ‐NO 2 ‐HABI is further demonstrated to fabricate the photonically programmable and thermally erasable FET‐based nonvolatile memory devices that are advantageous in terms of i) high ON/OFF current ratio, ii) nondestructive reading at low electrical bias, and iii) reasonably highly stable ON‐state and OFF‐state.

Liu, Yidong↗

Extended defects in CdZnTe crystals: Effects on device performance

We explored some unique defects in a batch of cadmium zinc telluride (CdZnTe) crystals, along with dislocations and Te-rich decorated features, revealed by chemical etching. We extensively investigated these distinctive imperfections in the crystals to identify their origin, dimensions, and distribution in the bulk material. We estimated that these features ranged from 50 to 500 {micro}m in diameter, and their depth was about 300 {micro}m. The density of these features ranged between 2 x 10{sup 2} and 1 x 10{sup 3} per cm{sup 3}. We elaborated a model of them and projected their effect on charge collection and spectral response. In addition, we fabricated detectors with these defective crystals and acquired fine details of charge-transport phenomena over the detectors volume using a high-spatial resolution (25 {micro}m) X-ray response mapping technique. We related the results to better understand the defects and their influence on the charge-transport properties of the devices. The role of the defects was identified by correlating their signatures with the findings from our theoretical model and our experimental data.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Spin-anticrossing effects in Co–SiO{sub 2}–Fe and ZnO–SiO{sub 2}–CuO three-nanolayer devices

Highlights: • Development of a new spintronic device. • Development of spin anticrossing spectroscopy of nanolayers. • Development of theory of quantum spin-polarized filter. - Abstract: Presently we report measurements of the spin-anticrossing spectra in the Co–SiO{sub 2}–Fe and ZnO–SiO{sub 2}–CuO three-nanolayer sandwich structures. The spin-anticrossing spectra in these systems are quite specific, differing from those observed earlier in other similar structures built of different materials. The theoretical model developed earlier is extended and used to interpret the available experimental results. A detailed ab initio analysis of the magnetic-field dependence of the output magnetic moment is also performed. The model predicts a spin-anticrossing spectrum comprising a series of peaks, with the spectral structure determined by several factors, discussed in the paper.

36 MATERIALS SCIENCE↗

Toward Hot Carrier Extraction in Intervalley Photovoltaic Devices

InGaAs heterostructures have demonstrated the means to maintain hot carrier behavior under practical operating conditions via valley photovoltaics. However, enhancing the extraction to create a fully operational hot carrier solar cell requires an enhanced understanding of the barriers inside such devices. A set of four InGaAs heterostructures altering the n + top layer of the structure has been produced to enable comparative analysis of the current density-voltage characterization and the relationship to the band and valley alignments.

14 SOLAR ENERGY↗

Towards the selective modification of soft-templated mesoporous carbon materials by elemental fluorine for energy storage devices

Graphite fluoride is classified into (CF) n and (C 2 F) n types based on its structure and composition. In the former (CF) n has been widely prepared and commercially utilized as electrodes in primary lithium ion batteries (LIBs). Porous electrodes, i.e. templated mesoporous carbons, can greatly improve first Coulombic efficiencies. Furthermore, by achieving the highest discharge potentials and rate capabilities, the extent of fluorination reactions and the retention of a conductive carbon backbone are required. Thus, the choice of the starting carbon nanomaterial and of the fluorination conditions is detrimental to the design of future energy storage and conversion devices, namely LIBs and pseudosupercapacitors.

25 ENERGY STORAGE↗

Device characterization for design optimization of 4 junction inverted metamorphic concentrator solar cells

Quantitative electroluminescence (EL) and luminescent coupling (LC) analysis, along with more conventional characterization techniques, are combined to completely characterize the subcell JV curves within a fourjunction (4J) inverted metamorphic solar cell (IMM). The 4J performance under arbitrary spectral conditions can be predicted from these subcell JV curves. The internal radiative efficiency (IRE) of each junction has been determined as a function of current density from the external radiative efficiency using optical modeling, but this required the accurate determination of the individual junction current densities during the EL measurement as affected by LC. These measurement and analysis techniques can be applied to any multijunction solar cell. The 4J IMM solar cell used to illustrate these techniques showed excellent junction quality as exhibited by high IRE and a one-sun AM1.5D efficiency of 36.3%. This device operates up to 1000 suns without limitations due to any of the three tunnel junctions.

14 SOLAR ENERGY↗

Plasma sputtering robotic device for in-situ thick coatings of long, small diameter vacuum tubes

A novel robotic plasma magnetron mole with a 50 cm long cathode was designed, fabricated, and operated. The reason for this endeavor is to alleviate the problems of unacceptable resistive heating of stainless steel vacuum tubes in the BNL Relativistic Heavy Ion Collider (RHIC). The magnetron mole was successfully operated to copper coat an assembly containing a full-size, stainless steel, cold bore, RHIC magnet tubing connected to two types of RHIC bellows, to which two additional pipes made of RHIC tubing were connected. To increase the cathode lifetime, a movable magnet package was developed, and the thickest possible cathode was made, with a rather challenging target to substrate (de facto anode) distance of less than 1.5 cm. Achieving reliable steady state magnetron discharges at such a short cathode to anode gap was rather challenging, when compared to commercial coating equipment, where the target to substrate distance is 10's cm; 6.3 cm is the lowest experimental target to substrate distance found in the literature. Additionally, the magnetron developed during this project provides unique omni-directional uniform coating. The magnetron is mounted on a carriage with spring loaded wheels that successfully crossed bellows and adjusted for variations in vacuum tube diameter, while keeping the magnetron centered. Electrical power and cooling water were fed through a cable bundle. The umbilical cabling system is driven by a motorized spool. Excellent coating adhesion was achieved. Measurements indicated that well-scrubbed copper coating reduced secondary electron yield to 1, i.e., the problem of electron clouds can be eliminated. Room temperature RF resistivity measurement indicated that a 10 μm copper coated stainless steel RHIC tube has a conductivity close to that of pure copper tubing. Excellent coating adhesion was achieved. The device details and experimental results are described.

36 MATERIALS SCIENCE↗

Toward exascale whole-device modeling of fusion devices: Porting the GENE gyrokinetic microturbulence code to GPU

GENE solves the five-dimensional gyrokinetic equations to simulate the development and evolution of plasma microturbulence in magnetic fusion devices. The plasma model used is close to first principles and computationally very expensive to solve in the relevant physical regimes. In order to use the emerging computational capabilities to gain new physics insights, several new numerical and computational developments are required. Here, we focus on the fact that it is crucial to efficiently utilize GPUs (graphics processing units) that provide the vast majority of the computational power on such systems. In this paper, we describe the various porting approaches considered and given the constraints of the GENE code and its development model, justify the decisions made, and describe the path taken in porting GENE to GPUs. We introduce a novel library called gtensor that was developed along the way to support the process. Performance results are presented for the ported code, which in a single node of the Summit supercomputer achieves a speed-up of almost 15× compared to running on central processing unit (CPU) only. Typical GPU kernels are memory-bound, achieving about 90% of peak. Our analysis shows that there is still room for improvement if we can refactor/fuse kernels to achieve higher arithmetic intensity. We also performed a weak parallel scalability study, which shows that the code runs well on a massively parallel system, but communication costs start becoming a significant bottleneck.

Germaschewski, K. (ORCID:0000000284956354)↗

Performance Testing using Silicon Devices - Analysis of Accuracy: Preprint

Accurately determining PV module performance in the field requires accurate measurements of solar irradiance reaching the PV panel (i.e., Plane-of-Array - POA Irradiance) with known measurement uncertainty. Pyranometers are commonly based on thermopile or silicon photodiode detectors. Silicon detectors, including PV reference cells, are an attractive choice for reasons that include faster timeresponse (10 us) than thermopile detectors (1 s to 5 s), lower cost and maintenance. The main drawback of silicon detectors is their limited spectral response. Therefore, to determine broadband POA solar irradiance, a pyranometer calibration factor that converts the narrowband response to broadband is required. Normally this calibration factor is a single number determined under clear-skyconditions with respect to a broadband reference radiometer. The pyranometer is then used for various scenarios including varying airmass, panel orientation and atmospheric conditions. This would not be an issue if all irradiance wavelengths that form the broadband spectrum responded uniformly to atmospheric constituents. Unfortunately, the scattering and absorption signature varies widely withwavelength and the calibration factor for the silicon photodiode pyranometer is not appropriate for other conditions. This paper reviews the issues that will arise from the use of silicon detectors for PV performance measurement in the field based on measurements from a group of pyranometers mounted on a 1-axis solar tracker. Also we will present a comparison of simultaneous spectral andbroadband measurements from silicon and thermopile detectors and estimated measurement errors when using silicon devices for both array performance and resource assessment.

14 SOLAR ENERGY↗