Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIGITAL COMPUTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Demonstration of the range over which the Langley Research Center digital computer charring ablation program (CHAP) can be used with confidence: Comparisons of CHAP predictions and test data for three ablation materials

Comparisons of ablation calculations with the charring ablation computer code and ablation test data are presented over a wide range of environmental conditions in air for three materials: low-density nylon phenolic, Avcoat 5026-39HC/G, and a filled silicon elastomer. Heat fluxes considered range from over 500 Btu/sq ft-sec to less than 50 Btu/sq ft-sec. Pressures range from 0.5 atm to .004 atm. Enthalpies range from about 2000 Btu/lb to 18000 Btu/lb. Predictions of recession, pyrolysis penetration, and thermocouple responses are considered. Recession predictions for nylon phenolic are good as steady state is approached, but strongly transient cases are underpredicted. Pyrolysis penetrations and thermocouple responses are very well predicted. Recession amounts for Avcoat and silicone elastomer are less well predicted, although high heat flux cases near steady state are fairly satisfactory. Pyrolysis penetrations and thermocouple responses are very well predicted.

Moyer, C. B.↗
NASA NTRS1971

The development of an earth resources information system using aerial photographs and digital computers

Analytical photogrammetry demonstrated that automatic three dimensional mapping of forest terrain was technically feasible. The examples were black and white photography at scales of 1:10,000 and 1:24,000. The major improvement in terrain modelling was the addition of the capability of joining small quadrangles together to form one large model about equal to the effective area of the pair of photographs. Improvements of somewhat lesser importance include: (1) the use of up to 16 grey levels; (2) the elimination of several coordinate transformations; and (3) the annotation of three-tone hysocline maps with elevations.

Amidon, E. L.↗
NASA NTRS1971

Calculation of radiation induced swelling of uranium mononitride using the digital computer program CYGRO 2

Fuel volume swelling and clad diametral creep strains were calculated for five fuel pins, clad with either T-111 (Ta-8W-2.4Hf) or PWC-11 (Nb-1Zr-0.1C). The fuel pins were irradiated to burnups between 2.7 and 4.6%. Clad temperatures were between 1750 and 2400 F (1228 and 1589 K). The maximum percentage difference between calculated and experimentally measured values of volumetric fuel swelling is 60%.

Davison, H. W.↗
NASA NTRS1973

Ascent control analysis for S-II derivative launch vehicles, digital computer program

Model is used for analysis of the six degrees-of-freedom dynamics of general launch vehicle during atmospheric boost. Equations of motion are developed for rigid body and flat earth. Case may be started at any time beginning with ignition of stage and may be ended upon, or prior to, stage burnout. End of case may be at a specified time or based on propellant expended.

Andrews, P. D.↗
NASA NTRS1973

Two dimensional digital computer

The development of a two dimensional data processing system is reported that extracts data from optical images by performing multiple logical operations simultaneously. A two dimensional logical circuits is described that contains a liquid crystal negation element and an OR-ing element. The negation element performs 20,000 negations simultaneously, and the OR does 20,000 OR operations simultaneously.

Schaefer, D. H.↗
NASA NTRS1973

Ground and flight experience with a strapdown inertial measuring unit and a general purpose airborne digital computer

Ground and flight tests were conducted to investigate the problems associated with using a strapdown inertial flight data system. The objectives of this investigation were to develop a three axis inertial attitude reference system, to evaluate a self-alignment technique, and to examine the problem of time-sharing a general purpose computer for the several tasks required of it. The performance of the strapdown platform/computer system that was developed was sufficiently accurate for the tasks attempted. For flights on the order of 45 minutes duration, attitude angle errors of + or -.035 radian (+ or -2 deg) in all axes were observed. Laboratory tests of the self-alignment technique gave accuracies of + or -.00075 radian in pitch and roll axes and + or -0.0045 radian in the yaw axis. Self-alignment flight results were inconsistent, since a stable solution was not obtained on windy days because of aircraft rocking motions.

Wolf, T. D.↗
NASA NTRS1973

Monitoring and control of fuel-cell system by digital computer

The computer was programmed to handle data, perform limit checks, control normal operation, take corrective actions, and initiate shutdown for a fuel-cell system. The system was operated under computer control for periods up to 30 hr. The adequacy of the programming and interfacing techniques used was verified.

Hagedorn, N. H.↗
NASA NTRS1973

Numerical analysis of stiffened shells of revolution. Volume 1: Theory manual for STARS-2S, 2B, 2V digital computer programs

The theoretical analysis background for the STARS-2 (shell theory automated for rotational structures) program is presented. The theory involved in the axisymmetric nonlinear and unsymmetric linear static analyses, and the stability and vibrations (including critical rotation speed) analyses involving axisymmetric prestress are discussed. The theory for nonlinear static, stability, and vibrations analyses, involving shells with unsymmetric loadings are included.

Svalbonas, V.↗
NASA NTRS1973

Numerical analysis of stiffened shells of revolution. Volume 3: Users' manual for STARS-2B, 2V, shell theory automated for rotational structures, 2 (buckling, vibrations), digital computer programs

The User's manual for the shell theory automated for rotational structures (STARS) 2B and 2V (buckling, vibrations) is presented. Several features of the program are: (1) arbitrary branching of the shell meridians, (2) arbitrary boundary conditions, (3) minimum input requirements to describe a complex, practical shell of revolution structure, and (4) accurate analysis capability using a minimum number of degrees of freedom.

Svalbonas, V.↗
NASA NTRS1973

Design of a modular digital computer system

A design tradeoff study is reported for a modular spaceborne computer system that is responsive to many mission types and phases. The computer uses redundancy to maximize reliability, and multiprocessing to maximize processing capacity. Fault detection and recovery features provide optimal reliability.

Source record↗